plat/qemu/qemu_bl2_setup.c - filogic/atf - Gitiles

 /*
  * Copyright (c) 2015-2016, ARM Limited and Contributors. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
  *
  * Redistributions of source code must retain the above copyright notice, this
  * list of conditions and the following disclaimer.
  *
  * Redistributions in binary form must reproduce the above copyright notice,
  * this list of conditions and the following disclaimer in the documentation
  * and/or other materials provided with the distribution.
  *
  * Neither the name of ARM nor the names of its contributors may be used
  * to endorse or promote products derived from this software without specific
  * prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  * POSSIBILITY OF SUCH DAMAGE.
  */
 #include <arch_helpers.h>
 #include <bl_common.h>
 #include <console.h>
 #include <debug.h>
 #include <libfdt.h>
 #include <platform_def.h>
 #include "qemu_private.h"
 #include <string.h>


 /*
  * The next 2 constants identify the extents of the code & RO data region.
  * These addresses are used by the MMU setup code and therefore they must be
  * page-aligned.  It is the responsibility of the linker script to ensure that
  * __RO_START__ and __RO_END__ linker symbols refer to page-aligned addresses.
  */
 #define BL2_RO_BASE (unsigned long)(&__RO_START__)
 #define BL2_RO_LIMIT (unsigned long)(&__RO_END__)

 /*******************************************************************************
  * This structure represents the superset of information that is passed to
  * BL3-1, e.g. while passing control to it from BL2, bl31_params
  * and other platform specific params
  ******************************************************************************/
 typedef struct bl2_to_bl31_params_mem {
 	bl31_params_t bl31_params;
 	image_info_t bl31_image_info;
 	image_info_t bl32_image_info;
 	image_info_t bl33_image_info;
 	entry_point_info_t bl33_ep_info;
 	entry_point_info_t bl32_ep_info;
 	entry_point_info_t bl31_ep_info;
 } bl2_to_bl31_params_mem_t;


 static bl2_to_bl31_params_mem_t bl31_params_mem;


 /* Data structure which holds the extents of the trusted SRAM for BL2 */
 static meminfo_t bl2_tzram_layout __aligned(CACHE_WRITEBACK_GRANULE);

 meminfo_t *bl2_plat_sec_mem_layout(void)
 {
 	return &bl2_tzram_layout;
 }

 /*******************************************************************************
  * This function assigns a pointer to the memory that the platform has kept
  * aside to pass platform specific and trusted firmware related information
  * to BL31. This memory is allocated by allocating memory to
  * bl2_to_bl31_params_mem_t structure which is a superset of all the
  * structure whose information is passed to BL31
  * NOTE: This function should be called only once and should be done
  * before generating params to BL31
  ******************************************************************************/
 bl31_params_t *bl2_plat_get_bl31_params(void)
 {
 	bl31_params_t *bl2_to_bl31_params;

 	/*
 	 * Initialise the memory for all the arguments that needs to
 	 * be passed to BL3-1
 	 */
 	memset(&bl31_params_mem, 0, sizeof(bl2_to_bl31_params_mem_t));

 	/* Assign memory for TF related information */
 	bl2_to_bl31_params = &bl31_params_mem.bl31_params;
 	SET_PARAM_HEAD(bl2_to_bl31_params, PARAM_BL31, VERSION_1, 0);

 	/* Fill BL3-1 related information */
 	bl2_to_bl31_params->bl31_image_info = &bl31_params_mem.bl31_image_info;
 	SET_PARAM_HEAD(bl2_to_bl31_params->bl31_image_info, PARAM_IMAGE_BINARY,
 		VERSION_1, 0);

 	/* Fill BL3-2 related information */
 	bl2_to_bl31_params->bl32_ep_info = &bl31_params_mem.bl32_ep_info;
 	SET_PARAM_HEAD(bl2_to_bl31_params->bl32_ep_info, PARAM_EP,
 		VERSION_1, 0);
 	bl2_to_bl31_params->bl32_image_info = &bl31_params_mem.bl32_image_info;
 	SET_PARAM_HEAD(bl2_to_bl31_params->bl32_image_info, PARAM_IMAGE_BINARY,
 		VERSION_1, 0);

 	/* Fill BL3-3 related information */
 	bl2_to_bl31_params->bl33_ep_info = &bl31_params_mem.bl33_ep_info;
 	SET_PARAM_HEAD(bl2_to_bl31_params->bl33_ep_info,
 		PARAM_EP, VERSION_1, 0);

 	/* BL3-3 expects to receive the primary CPU MPID (through x0) */
 	bl2_to_bl31_params->bl33_ep_info->args.arg0 = 0xffff & read_mpidr();

 	bl2_to_bl31_params->bl33_image_info = &bl31_params_mem.bl33_image_info;
 	SET_PARAM_HEAD(bl2_to_bl31_params->bl33_image_info, PARAM_IMAGE_BINARY,
 		VERSION_1, 0);

 	return bl2_to_bl31_params;
 }

 /* Flush the TF params and the TF plat params */
 void bl2_plat_flush_bl31_params(void)
 {
 	flush_dcache_range((unsigned long)&bl31_params_mem,
 			sizeof(bl2_to_bl31_params_mem_t));
 }

 /*******************************************************************************
  * This function returns a pointer to the shared memory that the platform
  * has kept to point to entry point information of BL31 to BL2
  ******************************************************************************/
 struct entry_point_info *bl2_plat_get_bl31_ep_info(void)
 {
 #if DEBUG
 	bl31_params_mem.bl31_ep_info.args.arg1 = QEMU_BL31_PLAT_PARAM_VAL;
 #endif

 	return &bl31_params_mem.bl31_ep_info;
 }


 void bl2_early_platform_setup(meminfo_t *mem_layout)
 {
 	/* Initialize the console to provide early debug support */
 	console_init(PLAT_QEMU_BOOT_UART_BASE, PLAT_QEMU_BOOT_UART_CLK_IN_HZ,
 			PLAT_QEMU_CONSOLE_BAUDRATE);

 	/* Setup the BL2 memory layout */
 	bl2_tzram_layout = *mem_layout;

 	plat_qemu_io_setup();
 }

 static void security_setup(void)
 {
 	/*
 	 * This is where a TrustZone address space controller and other
 	 * security related peripherals, would be configured.
 	 */
 }

 static void update_dt(void)
 {
 	int ret;
 	void *fdt = (void *)(uintptr_t)PLAT_QEMU_DT_BASE;

 	ret = fdt_open_into(fdt, fdt, PLAT_QEMU_DT_MAX_SIZE);
 	if (ret < 0) {
 		ERROR("Invalid Device Tree at %p: error %d\n", fdt, ret);
 		return;
 	}

 	if (dt_add_psci_node(fdt)) {
 		ERROR("Failed to add PSCI Device Tree node\n");
 		return;
 	}

 	if (dt_add_psci_cpu_enable_methods(fdt)) {
 		ERROR("Failed to add PSCI cpu enable methods in Device Tree\n");
 		return;
 	}

 	ret = fdt_pack(fdt);
 	if (ret < 0)
 		ERROR("Failed to pack Device Tree at %p: error %d\n", fdt, ret);
 }

 void bl2_platform_setup(void)
 {
 	security_setup();
 	update_dt();

 	/* TODO Initialize timer */
 }

 void bl2_plat_arch_setup(void)
 {
 	qemu_configure_mmu_el1(bl2_tzram_layout.total_base,
 			      bl2_tzram_layout.total_size,
 			      BL2_RO_BASE, BL2_RO_LIMIT,
 			      BL_COHERENT_RAM_BASE, BL_COHERENT_RAM_END);
 }

 /*******************************************************************************
  * Gets SPSR for BL32 entry
  ******************************************************************************/
 static uint32_t qemu_get_spsr_for_bl32_entry(void)
 {
 	/*
 	 * The Secure Payload Dispatcher service is responsible for
 	 * setting the SPSR prior to entry into the BL3-2 image.
 	 */
 	return 0;
 }

 /*******************************************************************************
  * Gets SPSR for BL33 entry
  ******************************************************************************/
 static uint32_t qemu_get_spsr_for_bl33_entry(void)
 {
 	unsigned long el_status;
 	unsigned int mode;
 	uint32_t spsr;

 	/* Figure out what mode we enter the non-secure world in */
 	el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT;
 	el_status &= ID_AA64PFR0_ELX_MASK;

 	mode = (el_status) ? MODE_EL2 : MODE_EL1;

 	/*
 	 * TODO: Consider the possibility of specifying the SPSR in
 	 * the FIP ToC and allowing the platform to have a say as
 	 * well.
 	 */
 	spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
 	return spsr;
 }

 /*******************************************************************************
  * Before calling this function BL3-1 is loaded in memory and its entrypoint
  * is set by load_image. This is a placeholder for the platform to change
  * the entrypoint of BL3-1 and set SPSR and security state.
  * On ARM standard platforms we only set the security state of the entrypoint
  ******************************************************************************/
 void bl2_plat_set_bl31_ep_info(image_info_t *bl31_image_info,
 					entry_point_info_t *bl31_ep_info)
 {
 	SET_SECURITY_STATE(bl31_ep_info->h.attr, SECURE);
 	bl31_ep_info->spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
 					DISABLE_ALL_EXCEPTIONS);
 }

 /*******************************************************************************
  * Before calling this function BL3-2 is loaded in memory and its entrypoint
  * is set by load_image. This is a placeholder for the platform to change
  * the entrypoint of BL3-2 and set SPSR and security state.
  * On ARM standard platforms we only set the security state of the entrypoint
  ******************************************************************************/
 void bl2_plat_set_bl32_ep_info(image_info_t *bl32_image_info,
 					entry_point_info_t *bl32_ep_info)
 {
 	SET_SECURITY_STATE(bl32_ep_info->h.attr, SECURE);
 	bl32_ep_info->spsr = qemu_get_spsr_for_bl32_entry();
 }

 /*******************************************************************************
  * Before calling this function BL3-3 is loaded in memory and its entrypoint
  * is set by load_image. This is a placeholder for the platform to change
  * the entrypoint of BL3-3 and set SPSR and security state.
  * On ARM standard platforms we only set the security state of the entrypoint
  ******************************************************************************/
 void bl2_plat_set_bl33_ep_info(image_info_t *image,
 					entry_point_info_t *bl33_ep_info)
 {

 	SET_SECURITY_STATE(bl33_ep_info->h.attr, NON_SECURE);
 	bl33_ep_info->spsr = qemu_get_spsr_for_bl33_entry();
 }

 /*******************************************************************************
  * Populate the extents of memory available for loading BL32
  ******************************************************************************/
 void bl2_plat_get_bl32_meminfo(meminfo_t *bl32_meminfo)
 {
 	/*
 	 * Populate the extents of memory available for loading BL32.
 	 */
 	bl32_meminfo->total_base = BL32_BASE;
 	bl32_meminfo->free_base = BL32_BASE;
 	bl32_meminfo->total_size = (BL32_MEM_BASE + BL32_MEM_SIZE) - BL32_BASE;
 	bl32_meminfo->free_size = (BL32_MEM_BASE + BL32_MEM_SIZE) - BL32_BASE;
 }

 /*******************************************************************************
  * Populate the extents of memory available for loading BL33
  ******************************************************************************/
 void bl2_plat_get_bl33_meminfo(meminfo_t *bl33_meminfo)
 {
 	bl33_meminfo->total_base = NS_DRAM0_BASE;
 	bl33_meminfo->total_size = NS_DRAM0_SIZE;
 	bl33_meminfo->free_base = NS_DRAM0_BASE;
 	bl33_meminfo->free_size = NS_DRAM0_SIZE;
 }

 unsigned long plat_get_ns_image_entrypoint(void)
 {
 	return NS_IMAGE_OFFSET;
 }
	/*
	* Copyright (c) 2015-2016, ARM Limited and Contributors. All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are met:
	*
	* Redistributions of source code must retain the above copyright notice, this
	* list of conditions and the following disclaimer.
	*
	* Redistributions in binary form must reproduce the above copyright notice,
	* this list of conditions and the following disclaimer in the documentation
	* and/or other materials provided with the distribution.
	*
	* Neither the name of ARM nor the names of its contributors may be used
	* to endorse or promote products derived from this software without specific
	* prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
	* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
	* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
	* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
	* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
	* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
	* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
	* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
	* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
	* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
	* POSSIBILITY OF SUCH DAMAGE.
	*/
	#include <arch_helpers.h>
	#include <bl_common.h>
	#include <console.h>
	#include <debug.h>
	#include <libfdt.h>
	#include <platform_def.h>
	#include "qemu_private.h"
	#include <string.h>


	/*
	* The next 2 constants identify the extents of the code & RO data region.
	* These addresses are used by the MMU setup code and therefore they must be
	* page-aligned. It is the responsibility of the linker script to ensure that
	* __RO_START__ and __RO_END__ linker symbols refer to page-aligned addresses.
	*/
	#define BL2_RO_BASE (unsigned long)(&__RO_START__)
	#define BL2_RO_LIMIT (unsigned long)(&__RO_END__)

	/*******************************************************************************
	* This structure represents the superset of information that is passed to
	* BL3-1, e.g. while passing control to it from BL2, bl31_params
	* and other platform specific params
	******************************************************************************/
	typedef struct bl2_to_bl31_params_mem {
	bl31_params_t bl31_params;
	image_info_t bl31_image_info;
	image_info_t bl32_image_info;
	image_info_t bl33_image_info;
	entry_point_info_t bl33_ep_info;
	entry_point_info_t bl32_ep_info;
	entry_point_info_t bl31_ep_info;
	} bl2_to_bl31_params_mem_t;


	static bl2_to_bl31_params_mem_t bl31_params_mem;



	/* Data structure which holds the extents of the trusted SRAM for BL2 */
	static meminfo_t bl2_tzram_layout __aligned(CACHE_WRITEBACK_GRANULE);

	meminfo_t *bl2_plat_sec_mem_layout(void)
	{
	return &bl2_tzram_layout;
	}

	/*******************************************************************************
	* This function assigns a pointer to the memory that the platform has kept
	* aside to pass platform specific and trusted firmware related information
	* to BL31. This memory is allocated by allocating memory to
	* bl2_to_bl31_params_mem_t structure which is a superset of all the
	* structure whose information is passed to BL31
	* NOTE: This function should be called only once and should be done
	* before generating params to BL31
	******************************************************************************/
	bl31_params_t *bl2_plat_get_bl31_params(void)
	{
	bl31_params_t *bl2_to_bl31_params;

	/*
	* Initialise the memory for all the arguments that needs to
	* be passed to BL3-1
	*/
	memset(&bl31_params_mem, 0, sizeof(bl2_to_bl31_params_mem_t));

	/* Assign memory for TF related information */
	bl2_to_bl31_params = &bl31_params_mem.bl31_params;
	SET_PARAM_HEAD(bl2_to_bl31_params, PARAM_BL31, VERSION_1, 0);

	/* Fill BL3-1 related information */
	bl2_to_bl31_params->bl31_image_info = &bl31_params_mem.bl31_image_info;
	SET_PARAM_HEAD(bl2_to_bl31_params->bl31_image_info, PARAM_IMAGE_BINARY,
	VERSION_1, 0);

	/* Fill BL3-2 related information */
	bl2_to_bl31_params->bl32_ep_info = &bl31_params_mem.bl32_ep_info;
	SET_PARAM_HEAD(bl2_to_bl31_params->bl32_ep_info, PARAM_EP,
	VERSION_1, 0);
	bl2_to_bl31_params->bl32_image_info = &bl31_params_mem.bl32_image_info;
	SET_PARAM_HEAD(bl2_to_bl31_params->bl32_image_info, PARAM_IMAGE_BINARY,
	VERSION_1, 0);

	/* Fill BL3-3 related information */
	bl2_to_bl31_params->bl33_ep_info = &bl31_params_mem.bl33_ep_info;
	SET_PARAM_HEAD(bl2_to_bl31_params->bl33_ep_info,
	PARAM_EP, VERSION_1, 0);

	/* BL3-3 expects to receive the primary CPU MPID (through x0) */
	bl2_to_bl31_params->bl33_ep_info->args.arg0 = 0xffff & read_mpidr();

	bl2_to_bl31_params->bl33_image_info = &bl31_params_mem.bl33_image_info;
	SET_PARAM_HEAD(bl2_to_bl31_params->bl33_image_info, PARAM_IMAGE_BINARY,
	VERSION_1, 0);

	return bl2_to_bl31_params;
	}

	/* Flush the TF params and the TF plat params */
	void bl2_plat_flush_bl31_params(void)
	{
	flush_dcache_range((unsigned long)&bl31_params_mem,
	sizeof(bl2_to_bl31_params_mem_t));
	}

	/*******************************************************************************
	* This function returns a pointer to the shared memory that the platform
	* has kept to point to entry point information of BL31 to BL2
	******************************************************************************/
	struct entry_point_info *bl2_plat_get_bl31_ep_info(void)
	{
	#if DEBUG
	bl31_params_mem.bl31_ep_info.args.arg1 = QEMU_BL31_PLAT_PARAM_VAL;
	#endif

	return &bl31_params_mem.bl31_ep_info;
	}



	void bl2_early_platform_setup(meminfo_t *mem_layout)
	{
	/* Initialize the console to provide early debug support */
	console_init(PLAT_QEMU_BOOT_UART_BASE, PLAT_QEMU_BOOT_UART_CLK_IN_HZ,
	PLAT_QEMU_CONSOLE_BAUDRATE);

	/* Setup the BL2 memory layout */
	bl2_tzram_layout = *mem_layout;

	plat_qemu_io_setup();
	}

	static void security_setup(void)
	{
	/*
	* This is where a TrustZone address space controller and other
	* security related peripherals, would be configured.
	*/
	}

	static void update_dt(void)
	{
	int ret;
	void fdt = (void )(uintptr_t)PLAT_QEMU_DT_BASE;

	ret = fdt_open_into(fdt, fdt, PLAT_QEMU_DT_MAX_SIZE);
	if (ret < 0) {
	ERROR("Invalid Device Tree at %p: error %d\n", fdt, ret);
	return;
	}

	if (dt_add_psci_node(fdt)) {
	ERROR("Failed to add PSCI Device Tree node\n");
	return;
	}

	if (dt_add_psci_cpu_enable_methods(fdt)) {
	ERROR("Failed to add PSCI cpu enable methods in Device Tree\n");
	return;
	}

	ret = fdt_pack(fdt);
	if (ret < 0)
	ERROR("Failed to pack Device Tree at %p: error %d\n", fdt, ret);
	}

	void bl2_platform_setup(void)
	{
	security_setup();
	update_dt();

	/* TODO Initialize timer */
	}

	void bl2_plat_arch_setup(void)
	{
	qemu_configure_mmu_el1(bl2_tzram_layout.total_base,
	bl2_tzram_layout.total_size,
	BL2_RO_BASE, BL2_RO_LIMIT,
	BL_COHERENT_RAM_BASE, BL_COHERENT_RAM_END);
	}

	/*******************************************************************************
	* Gets SPSR for BL32 entry
	******************************************************************************/
	static uint32_t qemu_get_spsr_for_bl32_entry(void)
	{
	/*
	* The Secure Payload Dispatcher service is responsible for
	* setting the SPSR prior to entry into the BL3-2 image.
	*/
	return 0;
	}

	/*******************************************************************************
	* Gets SPSR for BL33 entry
	******************************************************************************/
	static uint32_t qemu_get_spsr_for_bl33_entry(void)
	{
	unsigned long el_status;
	unsigned int mode;
	uint32_t spsr;

	/* Figure out what mode we enter the non-secure world in */
	el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT;
	el_status &= ID_AA64PFR0_ELX_MASK;

	mode = (el_status) ? MODE_EL2 : MODE_EL1;

	/*
	* TODO: Consider the possibility of specifying the SPSR in
	* the FIP ToC and allowing the platform to have a say as
	* well.
	*/
	spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
	return spsr;
	}

	/*******************************************************************************
	* Before calling this function BL3-1 is loaded in memory and its entrypoint
	* is set by load_image. This is a placeholder for the platform to change
	* the entrypoint of BL3-1 and set SPSR and security state.
	* On ARM standard platforms we only set the security state of the entrypoint
	******************************************************************************/
	void bl2_plat_set_bl31_ep_info(image_info_t *bl31_image_info,
	entry_point_info_t *bl31_ep_info)
	{
	SET_SECURITY_STATE(bl31_ep_info->h.attr, SECURE);
	bl31_ep_info->spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
	DISABLE_ALL_EXCEPTIONS);
	}

	/*******************************************************************************
	* Before calling this function BL3-2 is loaded in memory and its entrypoint
	* is set by load_image. This is a placeholder for the platform to change
	* the entrypoint of BL3-2 and set SPSR and security state.
	* On ARM standard platforms we only set the security state of the entrypoint
	******************************************************************************/
	void bl2_plat_set_bl32_ep_info(image_info_t *bl32_image_info,
	entry_point_info_t *bl32_ep_info)
	{
	SET_SECURITY_STATE(bl32_ep_info->h.attr, SECURE);
	bl32_ep_info->spsr = qemu_get_spsr_for_bl32_entry();
	}

	/*******************************************************************************
	* Before calling this function BL3-3 is loaded in memory and its entrypoint
	* is set by load_image. This is a placeholder for the platform to change
	* the entrypoint of BL3-3 and set SPSR and security state.
	* On ARM standard platforms we only set the security state of the entrypoint
	******************************************************************************/
	void bl2_plat_set_bl33_ep_info(image_info_t *image,
	entry_point_info_t *bl33_ep_info)
	{

	SET_SECURITY_STATE(bl33_ep_info->h.attr, NON_SECURE);
	bl33_ep_info->spsr = qemu_get_spsr_for_bl33_entry();
	}

	/*******************************************************************************
	* Populate the extents of memory available for loading BL32
	******************************************************************************/
	void bl2_plat_get_bl32_meminfo(meminfo_t *bl32_meminfo)
	{
	/*
	* Populate the extents of memory available for loading BL32.
	*/
	bl32_meminfo->total_base = BL32_BASE;
	bl32_meminfo->free_base = BL32_BASE;
	bl32_meminfo->total_size = (BL32_MEM_BASE + BL32_MEM_SIZE) - BL32_BASE;
	bl32_meminfo->free_size = (BL32_MEM_BASE + BL32_MEM_SIZE) - BL32_BASE;
	}

	/*******************************************************************************
	* Populate the extents of memory available for loading BL33
	******************************************************************************/
	void bl2_plat_get_bl33_meminfo(meminfo_t *bl33_meminfo)
	{
	bl33_meminfo->total_base = NS_DRAM0_BASE;
	bl33_meminfo->total_size = NS_DRAM0_SIZE;
	bl33_meminfo->free_base = NS_DRAM0_BASE;
	bl33_meminfo->free_size = NS_DRAM0_SIZE;
	}

	unsigned long plat_get_ns_image_entrypoint(void)
	{
	return NS_IMAGE_OFFSET;
	}