blob: 3e67d34499ef48d91a54d9c627180591c7c34f77 [file] [log] [blame]
/*
* Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* Neither the name of ARM nor the names of its contributors may be used
* to endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <arch.h>
#include <asm_macros.S>
#include <psci.h>
#include <xlat_tables.h>
.globl psci_aff_on_finish_entry
.globl psci_aff_suspend_finish_entry
.globl psci_power_down_wfi
/* -----------------------------------------------------
* This cpu has been physically powered up. Depending
* upon whether it was resumed from suspend or simply
* turned on, call the common power on finisher with
* the handlers (chosen depending upon original state).
* -----------------------------------------------------
*/
func psci_aff_on_finish_entry
adr x23, psci_afflvl_on_finishers
b psci_aff_common_finish_entry
psci_aff_suspend_finish_entry:
adr x23, psci_afflvl_suspend_finishers
psci_aff_common_finish_entry:
#if !RESET_TO_BL31
/* ---------------------------------------------
* Perform any processor specific actions which
* undo or are in addition to the actions
* performed by the reset handler in the BootROM
* (BL1) e.g. cache, tlb invalidations, errata
* workarounds etc.
* ---------------------------------------------
*/
bl reset_handler
/* ---------------------------------------------
* Enable the instruction cache, stack pointer
* and data access alignment checks.
* It can be assumed that BL3-1 entrypoint code
* will do this when RESET_TO_BL31 is set. The
* same assumption cannot be made when another
* boot loader executes before BL3-1 in the warm
* boot path e.g. BL1.
* ---------------------------------------------
*/
mov x1, #(SCTLR_I_BIT | SCTLR_A_BIT | SCTLR_SA_BIT)
mrs x0, sctlr_el3
orr x0, x0, x1
msr sctlr_el3, x0
isb
#endif
/* ---------------------------------------------
* Initialise the pcpu cache pointer for the CPU
* ---------------------------------------------
*/
bl init_cpu_data_ptr
/* ---------------------------------------------
* Initialize the cpu_ops pointer.
* ---------------------------------------------
*/
bl init_cpu_ops
/* ---------------------------------------------
* Set the exception vectors
* ---------------------------------------------
*/
adr x0, runtime_exceptions
msr vbar_el3, x0
isb
/* ---------------------------------------------
* Enable the SError interrupt now that the
* exception vectors have been setup.
* ---------------------------------------------
*/
msr daifclr, #DAIF_ABT_BIT
/* ---------------------------------------------
* Use SP_EL0 for the C runtime stack.
* ---------------------------------------------
*/
msr spsel, #0
/* --------------------------------------------
* Give ourselves a stack whose memory will be
* marked as Normal-IS-WBWA when the MMU is
* enabled.
* --------------------------------------------
*/
mrs x0, mpidr_el1
bl platform_set_stack
/* --------------------------------------------
* Enable the MMU with the DCache disabled. It
* is safe to use stacks allocated in normal
* memory as a result. All memory accesses are
* marked nGnRnE when the MMU is disabled. So
* all the stack writes will make it to memory.
* All memory accesses are marked Non-cacheable
* when the MMU is enabled but D$ is disabled.
* So used stack memory is guaranteed to be
* visible immediately after the MMU is enabled
* Enabling the DCache at the same time as the
* MMU can lead to speculatively fetched and
* possibly stale stack memory being read from
* other caches. This can lead to coherency
* issues.
* --------------------------------------------
*/
mov x0, #DISABLE_DCACHE
bl bl31_plat_enable_mmu
/* ---------------------------------------------
* Call the finishers starting from affinity
* level 0.
* ---------------------------------------------
*/
bl get_power_on_target_afflvl
mov x2, x23
mov x1, x0
mov x0, #MPIDR_AFFLVL0
bl psci_afflvl_power_on_finish
b el3_exit
/* --------------------------------------------
* This function is called to indicate to the
* power controller that it is safe to power
* down this cpu. It should not exit the wfi
* and will be released from reset upon power
* up. 'wfi_spill' is used to catch erroneous
* exits from wfi.
* --------------------------------------------
*/
func psci_power_down_wfi
dsb sy // ensure write buffer empty
wfi
wfi_spill:
b wfi_spill