blob: d06e85435ffbd6a2038323e09b43662212f72fb4 [file] [log] [blame]
/*
* Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* Neither the name of ARM nor the names of its contributors may be used
* to endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <arch.h>
#include <bl_common.h>
#include <bl1.h>
#include <platform.h>
#include <runtime_svc.h>
#include <asm_macros.S>
.globl early_exceptions
.weak display_boot_progress
.section .vectors, "ax"; .align 11
/* -----------------------------------------------------
* Very simple stackless exception handlers used by all
* bootloader stages. BL31 uses them before stacks are
* setup. BL1/BL2 use them throughout.
* -----------------------------------------------------
*/
.align 7
early_exceptions:
/* -----------------------------------------------------
* Current EL with SP0 : 0x0 - 0x180
* -----------------------------------------------------
*/
SynchronousExceptionSP0:
mov x0, #SYNC_EXCEPTION_SP_EL0
bl plat_report_exception
b SynchronousExceptionSP0
check_vector_size SynchronousExceptionSP0
.align 7
IrqSP0:
mov x0, #IRQ_SP_EL0
bl plat_report_exception
b IrqSP0
check_vector_size IrqSP0
.align 7
FiqSP0:
mov x0, #FIQ_SP_EL0
bl plat_report_exception
b FiqSP0
check_vector_size FiqSP0
.align 7
SErrorSP0:
mov x0, #SERROR_SP_EL0
bl plat_report_exception
b SErrorSP0
check_vector_size SErrorSP0
/* -----------------------------------------------------
* Current EL with SPx: 0x200 - 0x380
* -----------------------------------------------------
*/
.align 7
SynchronousExceptionSPx:
mov x0, #SYNC_EXCEPTION_SP_ELX
bl plat_report_exception
b SynchronousExceptionSPx
check_vector_size SynchronousExceptionSPx
.align 7
IrqSPx:
mov x0, #IRQ_SP_ELX
bl plat_report_exception
b IrqSPx
check_vector_size IrqSPx
.align 7
FiqSPx:
mov x0, #FIQ_SP_ELX
bl plat_report_exception
b FiqSPx
check_vector_size FiqSPx
.align 7
SErrorSPx:
mov x0, #SERROR_SP_ELX
bl plat_report_exception
b SErrorSPx
check_vector_size SErrorSPx
/* -----------------------------------------------------
* Lower EL using AArch64 : 0x400 - 0x580
* -----------------------------------------------------
*/
.align 7
SynchronousExceptionA64:
/* ---------------------------------------------
* Only a single SMC exception from BL2 to ask
* BL1 to pass EL3 control to BL31 is expected
* here.
* ---------------------------------------------
*/
b process_exception
check_vector_size SynchronousExceptionA64
.align 7
IrqA64:
mov x0, #IRQ_AARCH64
bl plat_report_exception
b IrqA64
check_vector_size IrqA64
.align 7
FiqA64:
mov x0, #FIQ_AARCH64
bl plat_report_exception
b FiqA64
check_vector_size FiqA64
.align 7
SErrorA64:
mov x0, #SERROR_AARCH64
bl plat_report_exception
b SErrorA64
check_vector_size SErrorA64
/* -----------------------------------------------------
* Lower EL using AArch32 : 0x0 - 0x180
* -----------------------------------------------------
*/
.align 7
SynchronousExceptionA32:
mov x0, #SYNC_EXCEPTION_AARCH32
bl plat_report_exception
b SynchronousExceptionA32
check_vector_size SynchronousExceptionA32
.align 7
IrqA32:
mov x0, #IRQ_AARCH32
bl plat_report_exception
b IrqA32
check_vector_size IrqA32
.align 7
FiqA32:
mov x0, #FIQ_AARCH32
bl plat_report_exception
b FiqA32
check_vector_size FiqA32
.align 7
SErrorA32:
mov x0, #SERROR_AARCH32
bl plat_report_exception
b SErrorA32
check_vector_size SErrorA32
.align 7
.section .text, "ax"
process_exception:
sub sp, sp, #0x40
stp x0, x1, [sp, #0x0]
stp x2, x3, [sp, #0x10]
stp x4, x5, [sp, #0x20]
stp x6, x7, [sp, #0x30]
mov x19, x0
mov x20, x1
mov x21, x2
mov x0, #SYNC_EXCEPTION_AARCH64
bl plat_report_exception
bl read_esr
ubfx x1, x0, #ESR_EC_SHIFT, #ESR_EC_LENGTH
cmp x1, #EC_AARCH64_SMC
b.ne panic
mov x1, #RUN_IMAGE
cmp x19, x1
b.ne panic
mov x0, x20
mov x1, x21
mov x2, x3
mov x3, x4
bl display_boot_progress
mov x0, x20
bl write_elr
mov x0, x21
bl write_spsr
ubfx x0, x21, #MODE_EL_SHIFT, #2
cmp x0, #MODE_EL3
b.ne skip_mmu_teardown
/* ---------------------------------------------
* If BL31 is to be executed in EL3 as well
* then turn off the MMU so that it can perform
* its own setup. TODO: Assuming flat mapped
* translations here. Also all should go into a
* separate MMU teardown function
* ---------------------------------------------
*/
mov x1, #(SCTLR_M_BIT | SCTLR_C_BIT | SCTLR_I_BIT)
bl read_sctlr
bic x0, x0, x1
bl write_sctlr
mov x0, #DCCISW
bl dcsw_op_all
bl tlbialle3
skip_mmu_teardown:
ldp x6, x7, [sp, #0x30]
ldp x4, x5, [sp, #0x20]
ldp x2, x3, [sp, #0x10]
ldp x0, x1, [sp, #0x0]
add sp, sp, #0x40
eret
panic:
wfi
b panic
/* -----------------------------------------------------
* BL1 redefines this function to print the fact that
* BL2 has done its job and BL31 is about to be loaded.
* This weak definition allows other bootloader stages
* to use the 'early_exceptions' without running into
* compilation errors.
* -----------------------------------------------------
*/
display_boot_progress:
ret