| /* |
| * Copyright (c) 2020, Arm Limited. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <arch.h> |
| #include <asm_macros.S> |
| #include <context.h> |
| #include <cpu_macros.S> |
| #include <cpuamu.h> |
| #include <rainier.h> |
| |
| /* Hardware handled coherency */ |
| #if HW_ASSISTED_COHERENCY == 0 |
| #error "Rainier CPU must be compiled with HW_ASSISTED_COHERENCY enabled" |
| #endif |
| |
| /* 64-bit only core */ |
| #if CTX_INCLUDE_AARCH32_REGS == 1 |
| #error "Rainier CPU supports only AArch64. Compile with CTX_INCLUDE_AARCH32_REGS=0" |
| #endif |
| |
| /* -------------------------------------------------- |
| * Disable speculative loads if Rainier supports |
| * SSBS. |
| * |
| * Shall clobber: x0. |
| * -------------------------------------------------- |
| */ |
| func rainier_disable_speculative_loads |
| /* Check if the PE implements SSBS */ |
| mrs x0, id_aa64pfr1_el1 |
| tst x0, #(ID_AA64PFR1_EL1_SSBS_MASK << ID_AA64PFR1_EL1_SSBS_SHIFT) |
| b.eq 1f |
| |
| /* Disable speculative loads */ |
| msr SSBS, xzr |
| |
| 1: |
| ret |
| endfunc rainier_disable_speculative_loads |
| |
| func rainier_reset_func |
| mov x19, x30 |
| |
| bl rainier_disable_speculative_loads |
| |
| /* Forces all cacheable atomic instructions to be near */ |
| mrs x0, RAINIER_CPUACTLR2_EL1 |
| orr x0, x0, #RAINIER_CPUACTLR2_EL1_BIT_2 |
| msr RAINIER_CPUACTLR2_EL1, x0 |
| isb |
| |
| bl cpu_get_rev_var |
| mov x18, x0 |
| |
| #if ENABLE_AMU |
| /* Make sure accesses from EL0/EL1 and EL2 are not trapped to EL3 */ |
| mrs x0, actlr_el3 |
| orr x0, x0, #RAINIER_ACTLR_AMEN_BIT |
| msr actlr_el3, x0 |
| |
| /* Make sure accesses from EL0/EL1 are not trapped to EL2 */ |
| mrs x0, actlr_el2 |
| orr x0, x0, #RAINIER_ACTLR_AMEN_BIT |
| msr actlr_el2, x0 |
| |
| /* Enable group0 counters */ |
| mov x0, #RAINIER_AMU_GROUP0_MASK |
| msr CPUAMCNTENSET_EL0, x0 |
| #endif |
| |
| isb |
| ret x19 |
| endfunc rainier_reset_func |
| |
| /* --------------------------------------------- |
| * HW will do the cache maintenance while powering down |
| * --------------------------------------------- |
| */ |
| func rainier_core_pwr_dwn |
| /* --------------------------------------------- |
| * Enable CPU power down bit in power control register |
| * --------------------------------------------- |
| */ |
| mrs x0, RAINIER_CPUPWRCTLR_EL1 |
| orr x0, x0, #RAINIER_CORE_PWRDN_EN_MASK |
| msr RAINIER_CPUPWRCTLR_EL1, x0 |
| isb |
| ret |
| endfunc rainier_core_pwr_dwn |
| |
| #if REPORT_ERRATA |
| /* |
| * Errata printing function for Rainier. Must follow AAPCS. |
| */ |
| func rainier_errata_report |
| stp x8, x30, [sp, #-16]! |
| |
| bl cpu_get_rev_var |
| mov x8, x0 |
| |
| ldp x8, x30, [sp], #16 |
| ret |
| endfunc rainier_errata_report |
| #endif |
| |
| /* --------------------------------------------- |
| * This function provides Rainier specific |
| * register information for crash reporting. |
| * It needs to return with x6 pointing to |
| * a list of register names in ascii and |
| * x8 - x15 having values of registers to be |
| * reported. |
| * --------------------------------------------- |
| */ |
| .section .rodata.rainier_regs, "aS" |
| rainier_regs: /* The ascii list of register names to be reported */ |
| .asciz "cpuectlr_el1", "" |
| |
| func rainier_cpu_reg_dump |
| adr x6, rainier_regs |
| mrs x8, RAINIER_CPUECTLR_EL1 |
| ret |
| endfunc rainier_cpu_reg_dump |
| |
| declare_cpu_ops rainier, RAINIER_MIDR, \ |
| rainier_reset_func, \ |
| rainier_core_pwr_dwn |