blob: 7149cb5a7fef42ef2f57129691830802d899325c [file] [log] [blame]
/*
* Copyright (c) 2016-2019, STMicroelectronics - All Rights Reserved
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef STPMIC1_H
#define STPMIC1_H
#include <drivers/st/stm32_i2c.h>
#include <lib/utils_def.h>
#define TURN_ON_REG 0x1U
#define TURN_OFF_REG 0x2U
#define ICC_LDO_TURN_OFF_REG 0x3U
#define ICC_BUCK_TURN_OFF_REG 0x4U
#define RESET_STATUS_REG 0x5U
#define VERSION_STATUS_REG 0x6U
#define MAIN_CONTROL_REG 0x10U
#define PADS_PULL_REG 0x11U
#define BUCK_PULL_DOWN_REG 0x12U
#define LDO14_PULL_DOWN_REG 0x13U
#define LDO56_PULL_DOWN_REG 0x14U
#define VIN_CONTROL_REG 0x15U
#define PONKEY_TIMER_REG 0x16U
#define MASK_RANK_BUCK_REG 0x17U
#define MASK_RESET_BUCK_REG 0x18U
#define MASK_RANK_LDO_REG 0x19U
#define MASK_RESET_LDO_REG 0x1AU
#define WATCHDOG_CONTROL_REG 0x1BU
#define WATCHDOG_TIMER_REG 0x1CU
#define BUCK_ICC_TURNOFF_REG 0x1DU
#define LDO_ICC_TURNOFF_REG 0x1EU
#define BUCK_APM_CONTROL_REG 0x1FU
#define BUCK1_CONTROL_REG 0x20U
#define BUCK2_CONTROL_REG 0x21U
#define BUCK3_CONTROL_REG 0x22U
#define BUCK4_CONTROL_REG 0x23U
#define VREF_DDR_CONTROL_REG 0x24U
#define LDO1_CONTROL_REG 0x25U
#define LDO2_CONTROL_REG 0x26U
#define LDO3_CONTROL_REG 0x27U
#define LDO4_CONTROL_REG 0x28U
#define LDO5_CONTROL_REG 0x29U
#define LDO6_CONTROL_REG 0x2AU
#define BUCK1_PWRCTRL_REG 0x30U
#define BUCK2_PWRCTRL_REG 0x31U
#define BUCK3_PWRCTRL_REG 0x32U
#define BUCK4_PWRCTRL_REG 0x33U
#define VREF_DDR_PWRCTRL_REG 0x34U
#define LDO1_PWRCTRL_REG 0x35U
#define LDO2_PWRCTRL_REG 0x36U
#define LDO3_PWRCTRL_REG 0x37U
#define LDO4_PWRCTRL_REG 0x38U
#define LDO5_PWRCTRL_REG 0x39U
#define LDO6_PWRCTRL_REG 0x3AU
#define FREQUENCY_SPREADING_REG 0x3BU
#define USB_CONTROL_REG 0x40U
#define ITLATCH1_REG 0x50U
#define ITLATCH2_REG 0x51U
#define ITLATCH3_REG 0x52U
#define ITLATCH4_REG 0x53U
#define ITSETLATCH1_REG 0x60U
#define ITSETLATCH2_REG 0x61U
#define ITSETLATCH3_REG 0x62U
#define ITSETLATCH4_REG 0x63U
#define ITCLEARLATCH1_REG 0x70U
#define ITCLEARLATCH2_REG 0x71U
#define ITCLEARLATCH3_REG 0x72U
#define ITCLEARLATCH4_REG 0x73U
#define ITMASK1_REG 0x80U
#define ITMASK2_REG 0x81U
#define ITMASK3_REG 0x82U
#define ITMASK4_REG 0x83U
#define ITSETMASK1_REG 0x90U
#define ITSETMASK2_REG 0x91U
#define ITSETMASK3_REG 0x92U
#define ITSETMASK4_REG 0x93U
#define ITCLEARMASK1_REG 0xA0U
#define ITCLEARMASK2_REG 0xA1U
#define ITCLEARMASK3_REG 0xA2U
#define ITCLEARMASK4_REG 0xA3U
#define ITSOURCE1_REG 0xB0U
#define ITSOURCE2_REG 0xB1U
#define ITSOURCE3_REG 0xB2U
#define ITSOURCE4_REG 0xB3U
#define LDO_VOLTAGE_MASK 0x7CU
#define BUCK_VOLTAGE_MASK 0xFCU
#define LDO_BUCK_VOLTAGE_SHIFT 2
#define LDO_ENABLE_MASK 0x01U
#define BUCK_ENABLE_MASK 0x01U
#define BUCK_HPLP_ENABLE_MASK 0x02U
#define LDO_HPLP_ENABLE_MASK 0x02U
#define LDO_BUCK_HPLP_SHIFT 1
#define LDO_BUCK_RANK_MASK 0x01U
#define LDO_BUCK_RESET_MASK 0x01U
#define LDO_BUCK_PULL_DOWN_MASK 0x03U
/* Main PMIC Control Register (MAIN_CONTROL_REG) */
#define ICC_EVENT_ENABLED BIT(4)
#define PWRCTRL_POLARITY_HIGH BIT(3)
#define PWRCTRL_PIN_VALID BIT(2)
#define RESTART_REQUEST_ENABLED BIT(1)
#define SOFTWARE_SWITCH_OFF_ENABLED BIT(0)
/* Main PMIC PADS Control Register (PADS_PULL_REG) */
#define WAKEUP_DETECTOR_DISABLED BIT(4)
#define PWRCTRL_PD_ACTIVE BIT(3)
#define PWRCTRL_PU_ACTIVE BIT(2)
#define WAKEUP_PD_ACTIVE BIT(1)
#define PONKEY_PU_ACTIVE BIT(0)
/* Main PMIC VINLOW Control Register (VIN_CONTROL_REGC DMSC) */
#define SWIN_DETECTOR_ENABLED BIT(7)
#define SWOUT_DETECTOR_ENABLED BIT(6)
#define VINLOW_HYST_MASK 0x3
#define VINLOW_HYST_SHIFT 4
#define VINLOW_THRESHOLD_MASK 0x7
#define VINLOW_THRESHOLD_SHIFT 1
#define VINLOW_ENABLED 0x01
#define VINLOW_CTRL_REG_MASK 0xFF
/* USB Control Register */
#define BOOST_OVP_DISABLED BIT(7)
#define VBUS_OTG_DETECTION_DISABLED BIT(6)
#define OCP_LIMIT_HIGH BIT(3)
#define SWIN_SWOUT_ENABLED BIT(2)
#define USBSW_OTG_SWITCH_ENABLED BIT(1)
int stpmic1_switch_off(void);
int stpmic1_register_read(uint8_t register_id, uint8_t *value);
int stpmic1_register_write(uint8_t register_id, uint8_t value);
int stpmic1_register_update(uint8_t register_id, uint8_t value, uint8_t mask);
int stpmic1_regulator_enable(const char *name);
int stpmic1_regulator_disable(const char *name);
uint8_t stpmic1_is_regulator_enabled(const char *name);
int stpmic1_regulator_voltage_set(const char *name, uint16_t millivolts);
void stpmic1_bind_i2c(struct i2c_handle_s *i2c_handle, uint16_t i2c_addr);
#endif /* STPMIC1_H */