blob: a9d5cc37facdddb1347804fa9747c2a3165a45bc [file] [log] [blame]
/*
* Copyright (c) 2015-2021, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <errno.h>
#include <common/bl_common.h>
#include <common/debug.h>
#include <common/tbbr/tbbr_img_def.h>
#include <drivers/arm/css/sds.h>
#include <drivers/arm/sp805.h>
#include <plat/arm/common/plat_arm.h>
#include <plat/arm/common/arm_def.h>
#include <plat/common/platform.h>
#include <platform_def.h>
void juno_reset_to_aarch32_state(void);
static int is_watchdog_reset(void)
{
#if !CSS_USE_SCMI_SDS_DRIVER
#define RESET_REASON_WDOG_RESET (0x2)
const uint32_t *reset_flags_ptr = (const uint32_t *)SSC_GPRETN;
if ((*reset_flags_ptr & RESET_REASON_WDOG_RESET) != 0)
return 1;
return 0;
#else
int ret;
uint32_t scp_reset_synd_flags;
ret = sds_init();
if (ret != SDS_OK) {
ERROR("SCP SDS initialization failed\n");
panic();
}
ret = sds_struct_read(SDS_RESET_SYNDROME_STRUCT_ID,
SDS_RESET_SYNDROME_OFFSET,
&scp_reset_synd_flags,
SDS_RESET_SYNDROME_SIZE,
SDS_ACCESS_MODE_NON_CACHED);
if (ret != SDS_OK) {
ERROR("Getting reset reason from SDS failed\n");
panic();
}
/* Check if the WATCHDOG_RESET_BIT is set in the reset syndrome */
if (scp_reset_synd_flags & SDS_RESET_SYNDROME_AP_WD_RESET_BIT)
return 1;
return 0;
#endif
}
/*******************************************************************************
* The following function checks if Firmware update is needed,
* by checking if TOC in FIP image is valid or watchdog reset happened.
******************************************************************************/
bool plat_arm_bl1_fwu_needed(void)
{
int32_t nv_flags = (int32_t)mmio_read_32(V2M_SYS_NVFLAGS_ADDR);
/* Check if TOC is invalid or watchdog reset happened. */
return (!arm_io_is_toc_valid() || (((nv_flags == -EAUTH) ||
(nv_flags == -ENOENT)) && is_watchdog_reset()));
}
/*******************************************************************************
* On JUNO update the arg2 with address of SCP_BL2U image info.
******************************************************************************/
void bl1_plat_set_ep_info(unsigned int image_id,
entry_point_info_t *ep_info)
{
if (image_id == BL2U_IMAGE_ID) {
image_desc_t *image_desc = bl1_plat_get_image_desc(SCP_BL2U_IMAGE_ID);
ep_info->args.arg2 = (unsigned long)&image_desc->image_info;
}
}
/*******************************************************************************
* On Juno clear SYS_NVFLAGS and wait for watchdog reset.
******************************************************************************/
__dead2 void bl1_plat_fwu_done(void *client_cookie, void *reserved)
{
uint32_t nv_flags = mmio_read_32(V2M_SYS_NVFLAGS_ADDR);
/* Clear the NV flags register. */
mmio_write_32((V2M_SYSREGS_BASE + V2M_SYS_NVFLAGSCLR),
nv_flags);
/* Setup the watchdog to reset the system as soon as possible */
sp805_refresh(ARM_SP805_TWDG_BASE, 1U);
while (true)
wfi();
}
#if JUNO_AARCH32_EL3_RUNTIME
void bl1_plat_prepare_exit(entry_point_info_t *ep_info)
{
#if !ARM_DISABLE_TRUSTED_WDOG
/* Disable watchdog before leaving BL1 */
sp805_stop(ARM_SP805_TWDG_BASE);
#endif
juno_reset_to_aarch32_state();
}
#endif /* JUNO_AARCH32_EL3_RUNTIME */
void plat_arm_secure_wdt_start(void)
{
sp805_start(ARM_SP805_TWDG_BASE, ARM_TWDG_LOAD_VAL);
}
void plat_arm_secure_wdt_stop(void)
{
sp805_stop(ARM_SP805_TWDG_BASE);
}