blob: b80cf45a20f9e7619279528272d76e6ba3c1fb39 [file] [log] [blame]
/*
* Copyright (c) 2019-2022, Xilinx, Inc. All rights reserved.
* Copyright (c) 2022-2023, Advanced Micro Devices, Inc. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
/* Versal power management enums and defines */
#ifndef PM_DEFS_H
#define PM_DEFS_H
#include "pm_node.h"
/*********************************************************************
* Macro definitions
********************************************************************/
/* State arguments of the self suspend */
#define PM_STATE_CPU_IDLE 0x0U
#define PM_STATE_SUSPEND_TO_RAM 0xFU
#define MAX_LATENCY (~0U)
#define MAX_QOS 100U
/* Processor core device IDs */
#define APU_DEVID(IDX) NODEID(XPM_NODECLASS_DEVICE, XPM_NODESUBCL_DEV_CORE, \
XPM_NODETYPE_DEV_CORE_APU, (IDX))
#define XPM_DEVID_ACPU_0 APU_DEVID(XPM_NODEIDX_DEV_ACPU_0)
#define XPM_DEVID_ACPU_1 APU_DEVID(XPM_NODEIDX_DEV_ACPU_1)
#define PERIPH_DEVID(IDX) NODEID((uint32_t)XPM_NODECLASS_DEVICE, \
(uint32_t)XPM_NODESUBCL_DEV_PERIPH, \
(uint32_t)XPM_NODETYPE_DEV_PERIPH, (IDX))
#define PM_GET_CALLBACK_DATA 0xa01U
#define PM_GET_TRUSTZONE_VERSION 0xa03U
#define TF_A_PM_REGISTER_SGI 0xa04U
/* PM API Versions */
#define PM_API_BASE_VERSION 1U
#define PM_API_VERSION_2 2U
/* Loader API ids */
#define PM_LOAD_PDI 0x701U
#define PM_LOAD_GET_HANDOFF_PARAMS 0x70BU
/* System shutdown macros */
#define XPM_SHUTDOWN_TYPE_SHUTDOWN 0U
#define XPM_SHUTDOWN_TYPE_RESET 1U
#define XPM_SHUTDOWN_TYPE_SETSCOPE_ONLY 2U
#define XPM_SHUTDOWN_SUBTYPE_RST_SUBSYSTEM 0U
#define XPM_SHUTDOWN_SUBTYPE_RST_PS_ONLY 1U
#define XPM_SHUTDOWN_SUBTYPE_RST_SYSTEM 2U
/*********************************************************************
* Enum definitions
********************************************************************/
/*
* ioctl id
*/
enum {
IOCTL_GET_RPU_OPER_MODE = 0,
IOCTL_SET_RPU_OPER_MODE = 1,
IOCTL_RPU_BOOT_ADDR_CONFIG = 2,
IOCTL_TCM_COMB_CONFIG = 3,
IOCTL_SET_TAPDELAY_BYPASS = 4,
IOCTL_SET_SGMII_MODE = 5,
IOCTL_SD_DLL_RESET = 6,
IOCTL_SET_SD_TAPDELAY = 7,
/* Ioctl for clock driver */
IOCTL_SET_PLL_FRAC_MODE = 8,
IOCTL_GET_PLL_FRAC_MODE = 9,
IOCTL_SET_PLL_FRAC_DATA = 10,
IOCTL_GET_PLL_FRAC_DATA = 11,
IOCTL_WRITE_GGS = 12,
IOCTL_READ_GGS = 13,
IOCTL_WRITE_PGGS = 14,
IOCTL_READ_PGGS = 15,
/* IOCTL for ULPI reset */
IOCTL_ULPI_RESET = 16,
/* Set healthy bit value */
IOCTL_SET_BOOT_HEALTH_STATUS = 17,
IOCTL_AFI = 18,
/* Probe counter read/write */
IOCTL_PROBE_COUNTER_READ = 19,
IOCTL_PROBE_COUNTER_WRITE = 20,
IOCTL_OSPI_MUX_SELECT = 21,
/* IOCTL for USB power request */
IOCTL_USB_SET_STATE = 22,
/* IOCTL to get last reset reason */
IOCTL_GET_LAST_RESET_REASON = 23,
/* AI engine NPI ISR clear */
IOCTL_AIE_ISR_CLEAR = 24,
/* Register SGI to TF-A */
IOCTL_SET_SGI = 25,
};
/**
* enum pm_pll_param - enum represents the parameters for a phase-locked loop.
* @PM_PLL_PARAM_DIV2: Enable for divide by 2 function inside the PLL.
* @PM_PLL_PARAM_FBDIV: Feedback divisor integer portion for the PLL.
* @PM_PLL_PARAM_DATA: Feedback divisor fractional portion for the PLL.
* @PM_PLL_PARAM_PRE_SRC: Clock source for PLL input.
* @PM_PLL_PARAM_POST_SRC: Clock source for PLL Bypass mode.
* @PM_PLL_PARAM_LOCK_DLY: Lock circuit config settings for lock windowsize.
* @PM_PLL_PARAM_LOCK_CNT: Lock circuit counter setting.
* @PM_PLL_PARAM_LFHF: PLL loop filter high frequency capacitor control.
* @PM_PLL_PARAM_CP: PLL charge pump control.
* @PM_PLL_PARAM_RES: PLL loop filter resistor control.
* @PM_PLL_PARAM_MAX: Represents the maximum parameter value for the PLL
*/
enum pm_pll_param {
PM_PLL_PARAM_DIV2,
PM_PLL_PARAM_FBDIV,
PM_PLL_PARAM_DATA,
PM_PLL_PARAM_PRE_SRC,
PM_PLL_PARAM_POST_SRC,
PM_PLL_PARAM_LOCK_DLY,
PM_PLL_PARAM_LOCK_CNT,
PM_PLL_PARAM_LFHF,
PM_PLL_PARAM_CP,
PM_PLL_PARAM_RES,
PM_PLL_PARAM_MAX,
};
enum pm_api_id {
/* Miscellaneous API functions: */
PM_GET_API_VERSION = 1, /* Do not change or move */
PM_SET_CONFIGURATION,
PM_GET_NODE_STATUS,
PM_GET_OP_CHARACTERISTIC,
PM_REGISTER_NOTIFIER,
/* API for suspending of PUs: */
PM_REQ_SUSPEND,
PM_SELF_SUSPEND,
PM_FORCE_POWERDOWN,
PM_ABORT_SUSPEND,
PM_REQ_WAKEUP,
PM_SET_WAKEUP_SOURCE,
PM_SYSTEM_SHUTDOWN,
/* API for managing PM slaves: */
PM_REQ_NODE,
PM_RELEASE_NODE,
PM_SET_REQUIREMENT,
PM_SET_MAX_LATENCY,
/* Direct control API functions: */
PM_RESET_ASSERT,
PM_RESET_GET_STATUS,
PM_MMIO_WRITE,
PM_MMIO_READ,
PM_INIT_FINALIZE,
PM_FPGA_LOAD,
PM_FPGA_GET_STATUS,
PM_GET_CHIPID,
PM_SECURE_RSA_AES,
PM_SECURE_SHA,
PM_SECURE_RSA,
PM_PINCTRL_REQUEST,
PM_PINCTRL_RELEASE,
PM_PINCTRL_GET_FUNCTION,
PM_PINCTRL_SET_FUNCTION,
PM_PINCTRL_CONFIG_PARAM_GET,
PM_PINCTRL_CONFIG_PARAM_SET,
PM_IOCTL,
/* API to query information from firmware */
PM_QUERY_DATA,
/* Clock control API functions */
PM_CLOCK_ENABLE,
PM_CLOCK_DISABLE,
PM_CLOCK_GETSTATE,
PM_CLOCK_SETDIVIDER,
PM_CLOCK_GETDIVIDER,
PM_CLOCK_SETRATE,
PM_CLOCK_GETRATE,
PM_CLOCK_SETPARENT,
PM_CLOCK_GETPARENT,
PM_SECURE_IMAGE,
/* FPGA PL Readback */
PM_FPGA_READ,
PM_SECURE_AES,
/* PLL control API functions */
PM_PLL_SET_PARAMETER,
PM_PLL_GET_PARAMETER,
PM_PLL_SET_MODE,
PM_PLL_GET_MODE,
/* PM Register Access API */
PM_REGISTER_ACCESS,
PM_EFUSE_ACCESS,
PM_FPGA_GET_VERSION,
PM_FPGA_GET_FEATURE_LIST,
PM_FEATURE_CHECK = 63,
PM_API_MAX = 74
};
enum pm_abort_reason {
ABORT_REASON_WKUP_EVENT = 100,
ABORT_REASON_PU_BUSY,
ABORT_REASON_NO_PWRDN,
ABORT_REASON_UNKNOWN,
};
enum pm_opchar_type {
PM_OPCHAR_TYPE_POWER = 1,
PM_OPCHAR_TYPE_TEMP,
PM_OPCHAR_TYPE_LATENCY,
};
/*
* Subsystem IDs
*/
typedef enum {
XPM_SUBSYSID_PMC,
XPM_SUBSYSID_PSM,
XPM_SUBSYSID_APU,
XPM_SUBSYSID_RPU0_LOCK,
XPM_SUBSYSID_RPU0_0,
XPM_SUBSYSID_RPU0_1,
XPM_SUBSYSID_DDR0,
XPM_SUBSYSID_ME,
XPM_SUBSYSID_PL,
XPM_SUBSYSID_MAX,
} XPm_SubsystemId;
/* TODO: move pm_ret_status from device specific location to common location */
/**
* enum pm_ret_status - enum represents the return status codes for a PM
* operation.
* @PM_RET_SUCCESS: success.
* @PM_RET_ERROR_ARGS: illegal arguments provided (deprecated).
* @PM_RET_ERROR_NOTSUPPORTED: feature not supported (deprecated).
* @PM_RET_ERROR_NOFEATURE: feature is not available.
* @PM_RET_ERROR_INVALID_CRC: invalid crc in IPI communication.
* @PM_RET_ERROR_NOT_ENABLED: feature is not enabled.
* @PM_RET_ERROR_INTERNAL: internal error.
* @PM_RET_ERROR_CONFLICT: conflict.
* @PM_RET_ERROR_ACCESS: access rights violation.
* @PM_RET_ERROR_INVALID_NODE: invalid node.
* @PM_RET_ERROR_DOUBLE_REQ: duplicate request for same node.
* @PM_RET_ERROR_ABORT_SUSPEND: suspend procedure has been aborted.
* @PM_RET_ERROR_TIMEOUT: timeout in communication with PMU.
* @PM_RET_ERROR_NODE_USED: node is already in use.
* @PM_RET_ERROR_NO_FEATURE: indicates that the requested feature is not
* supported.
*/
enum pm_ret_status {
PM_RET_SUCCESS,
PM_RET_ERROR_ARGS = 1,
PM_RET_ERROR_NOTSUPPORTED = 4,
PM_RET_ERROR_NOFEATURE = 19,
PM_RET_ERROR_INVALID_CRC = 301,
PM_RET_ERROR_NOT_ENABLED = 29,
PM_RET_ERROR_INTERNAL = 2000,
PM_RET_ERROR_CONFLICT = 2001,
PM_RET_ERROR_ACCESS = 2002,
PM_RET_ERROR_INVALID_NODE = 2003,
PM_RET_ERROR_DOUBLE_REQ = 2004,
PM_RET_ERROR_ABORT_SUSPEND = 2005,
PM_RET_ERROR_TIMEOUT = 2006,
PM_RET_ERROR_NODE_USED = 2007,
PM_RET_ERROR_NO_FEATURE = 2008
};
/*
* Qids
*/
enum pm_query_id {
XPM_QID_INVALID,
XPM_QID_CLOCK_GET_NAME,
XPM_QID_CLOCK_GET_TOPOLOGY,
XPM_QID_CLOCK_GET_FIXEDFACTOR_PARAMS,
XPM_QID_CLOCK_GET_MUXSOURCES,
XPM_QID_CLOCK_GET_ATTRIBUTES,
XPM_QID_PINCTRL_GET_NUM_PINS,
XPM_QID_PINCTRL_GET_NUM_FUNCTIONS,
XPM_QID_PINCTRL_GET_NUM_FUNCTION_GROUPS,
XPM_QID_PINCTRL_GET_FUNCTION_NAME,
XPM_QID_PINCTRL_GET_FUNCTION_GROUPS,
XPM_QID_PINCTRL_GET_PIN_GROUPS,
XPM_QID_CLOCK_GET_NUM_CLOCKS,
XPM_QID_CLOCK_GET_MAX_DIVISOR,
XPM_QID_PLD_GET_PARENT,
};
#endif /* PM_DEFS_H */