| /* |
| * Copyright (c) 2021-2023, Stephan Gerhold <stephan@gerhold.net> |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <arch.h> |
| #include <asm_macros.S> |
| |
| #include <msm8916_mmap.h> |
| |
| #define APCS_TCM_START_ADDR 0x10 |
| #define APCS_TCM_REDIRECT_EN_0 BIT_32(0) |
| |
| .globl plat_crash_console_init |
| .globl plat_crash_console_putc |
| .globl plat_crash_console_flush |
| .globl plat_panic_handler |
| .globl plat_my_core_pos |
| .globl plat_get_my_entrypoint |
| .globl plat_reset_handler |
| .globl platform_mem_init |
| .globl msm8916_entry_point |
| |
| /* ------------------------------------------------- |
| * int plat_crash_console_init(void) |
| * Initialize the crash console. |
| * Out: x0 - 1 on success, 0 on error |
| * Clobber list : x0 - x4 |
| * ------------------------------------------------- |
| */ |
| func plat_crash_console_init |
| mov_imm x1, BLSP_UART_BASE |
| mov x0, #1 |
| b console_uartdm_core_init |
| endfunc plat_crash_console_init |
| |
| /* ------------------------------------------------- |
| * int plat_crash_console_putc(int c) |
| * Print a character on the crash console. |
| * In : w0 - character to be printed |
| * Out: w0 - printed character on success |
| * Clobber list : x1, x2 |
| * ------------------------------------------------- |
| */ |
| func plat_crash_console_putc |
| mov_imm x1, BLSP_UART_BASE |
| b console_uartdm_core_putc |
| endfunc plat_crash_console_putc |
| |
| /* ------------------------------------------------- |
| * void plat_crash_console_flush(void) |
| * Force a write of all buffered data that has not |
| * been output. |
| * Clobber list : x1, x2 |
| * ------------------------------------------------- |
| */ |
| func plat_crash_console_flush |
| mov_imm x1, BLSP_UART_BASE |
| b console_uartdm_core_flush |
| endfunc plat_crash_console_flush |
| |
| /* ------------------------------------------------- |
| * void plat_panic_handler(void) __dead |
| * Called when an unrecoverable error occurs. |
| * ------------------------------------------------- |
| */ |
| func plat_panic_handler |
| /* Try to shutdown/reset */ |
| mov_imm x0, MPM_PS_HOLD |
| str wzr, [x0] |
| 1: b 1b |
| endfunc plat_panic_handler |
| |
| /* ------------------------------------------------- |
| * unsigned int plat_my_core_pos(void) |
| * Out: x0 - index of the calling CPU |
| * ------------------------------------------------- |
| */ |
| func plat_my_core_pos |
| /* There is just a single cluster so this is very simple */ |
| mrs x0, mpidr_el1 |
| and x0, x0, #MPIDR_CPU_MASK |
| ret |
| endfunc plat_my_core_pos |
| |
| /* ------------------------------------------------- |
| * uintptr_t plat_get_my_entrypoint(void) |
| * Distinguish cold and warm boot and return warm boot |
| * entry address if available. |
| * Out: x0 - warm boot entry point or 0 on cold boot |
| * ------------------------------------------------- |
| */ |
| func plat_get_my_entrypoint |
| ldr x0, msm8916_entry_point |
| cbz x0, 1f |
| ret |
| 1: |
| /* |
| * Cold boot: Disable TCM redirect to L2 cache as early as |
| * possible to avoid crashes when making use of the cache. |
| */ |
| mov_imm x1, APCS_CFG |
| ldr w2, [x1, #APCS_TCM_START_ADDR] |
| and w2, w2, #~APCS_TCM_REDIRECT_EN_0 |
| str w2, [x1, #APCS_TCM_START_ADDR] |
| |
| /* |
| * After reset the CPU always starts executing at the fixed reset |
| * address (0x0), which does not match the link address of BL31. |
| * The "boot remapper" redirects all memory accesses to the real |
| * physical address in DRAM. |
| * |
| * For warm boots, this is already handled by loading the real |
| * entry point address above. |
| * |
| * For cold boots, check if the CPU is using the boot remapper, |
| * i.e. if bl31_entrypoint appears to be at the reset address (0x0). |
| */ |
| adr x1, bl31_entrypoint |
| cbnz x1, 2f |
| |
| /* |
| * Add the real BL31_BASE offset to the return address in the link |
| * register so the CPU will continue at the real address after return. |
| */ |
| mov_imm x1, BL31_BASE |
| add lr, lr, x1 |
| 2: |
| ret |
| endfunc plat_get_my_entrypoint |
| |
| /* ------------------------------------------------- |
| * void platform_mem_init(void) |
| * Performs additional memory initialization early |
| * in the boot process. |
| * ------------------------------------------------- |
| */ |
| func platform_mem_init |
| /* Nothing to do here, all memory is already initialized */ |
| ret |
| endfunc platform_mem_init |
| |
| .data |
| .align 3 |
| |
| /* ------------------------------------------------- |
| * Warm boot entry point for CPU. Set by PSCI code. |
| * ------------------------------------------------- |
| */ |
| msm8916_entry_point: |
| .quad 0 |