| /* |
| * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <arch_helpers.h> |
| #include <assert.h> |
| #include <bl_common.h> |
| #include <console.h> |
| #include <debug.h> |
| #include <hi6220.h> |
| #include <mmio.h> |
| #include <platform.h> |
| #include <platform_def.h> |
| #include <string.h> |
| |
| #define MCU_SECTION_MAX 30 |
| |
| enum MCU_IMAGE_SEC_TYPE_ENUM { |
| MCU_IMAGE_SEC_TYPE_TEXT = 0, /* text section */ |
| MCU_IMAGE_SEC_TYPE_DATA, /* data section */ |
| MCU_IMAGE_SEC_TYPE_BUTT |
| }; |
| |
| enum MCU_IMAGE_SEC_LOAD_ENUM { |
| MCU_IMAGE_SEC_LOAD_STATIC = 0, |
| MCU_IMAGE_SEC_LOAD_DYNAMIC, |
| MCU_IMAGE_SEC_LOAD_BUFFER, |
| MCU_IMAGE_SEC_LOAD_MODEM_ENTRY, |
| MCU_IMAGE_SEC_LOAD_BUTT |
| }; |
| |
| struct mcu_image_sec { |
| unsigned short serial; |
| char type; |
| char load_attr; |
| uint32_t src_offset; /* offset in image */ |
| uint32_t dst_offset; /* offset in memory */ |
| uint32_t size; |
| }; |
| |
| struct mcu_image_head { |
| char time_stamp[24]; |
| uint32_t image_size; |
| uint32_t secs_num; |
| struct mcu_image_sec secs[MCU_SECTION_MAX]; |
| }; |
| |
| #define SOC_SRAM_M3_BASE_ADDR (0xF6000000) |
| |
| #define MCU_SRAM_SIZE (0x0000C000) |
| #define MCU_CACHE_SIZE (0x00004000) |
| #define MCU_CODE_SIZE (MCU_SRAM_SIZE - MCU_CACHE_SIZE) |
| |
| #define MCU_SYS_MEM_ADDR (0x05E00000) |
| #define MCU_SYS_MEM_SIZE (0x00100000) |
| |
| static uint32_t mcu2ap_addr(uint32_t mcu_addr) |
| { |
| if (mcu_addr < MCU_CODE_SIZE) |
| return (mcu_addr + SOC_SRAM_M3_BASE_ADDR); |
| else if ((mcu_addr >= MCU_SRAM_SIZE) && |
| (mcu_addr < MCU_SRAM_SIZE + MCU_SYS_MEM_SIZE)) |
| return mcu_addr - MCU_SRAM_SIZE + MCU_SYS_MEM_ADDR; |
| else |
| return mcu_addr; |
| } |
| |
| static int is_binary_header_invalid(struct mcu_image_head *head, |
| unsigned int length) |
| { |
| /* invalid cases */ |
| if ((head->image_size == 0) || |
| (head->image_size > length) || |
| (head->secs_num > MCU_SECTION_MAX) || |
| (head->secs_num == 0)) |
| return 1; |
| |
| return 0; |
| } |
| |
| static int is_binary_section_invalid(struct mcu_image_sec *sec, |
| struct mcu_image_head *head) |
| { |
| unsigned long ap_dst_offset = 0; |
| |
| if ((sec->serial >= head->secs_num) || |
| (sec->src_offset + sec->size > head->image_size)) |
| return 1; |
| |
| if ((sec->type >= MCU_IMAGE_SEC_TYPE_BUTT) || |
| (sec->load_attr >= MCU_IMAGE_SEC_LOAD_BUTT)) |
| return 1; |
| |
| ap_dst_offset = mcu2ap_addr(sec->dst_offset); |
| if ((ap_dst_offset >= SOC_SRAM_M3_BASE_ADDR) && |
| (ap_dst_offset < SOC_SRAM_M3_BASE_ADDR + 0x20000 - sec->size)) |
| return 0; |
| else if ((ap_dst_offset >= MCU_SYS_MEM_ADDR) && |
| (ap_dst_offset < MCU_SYS_MEM_ADDR + MCU_SYS_MEM_SIZE - sec->size)) |
| return 0; |
| else if ((ap_dst_offset >= 0xfff8e000) && |
| (ap_dst_offset < 0xfff91c00 - sec->size)) |
| return 0; |
| |
| ERROR("%s: mcu destination address invalid.\n", __func__); |
| ERROR("%s: number=%d, dst offset=%d size=%d\n", |
| __func__, sec->serial, sec->dst_offset, sec->size); |
| return 1; |
| } |
| |
| void hisi_mcu_enable_sram(void) |
| { |
| mmio_write_32(AO_SC_PERIPH_CLKEN4, |
| AO_SC_PERIPH_CLKEN4_HCLK_IPC_S | |
| AO_SC_PERIPH_CLKEN4_HCLK_IPC_NS); |
| |
| /* set register to enable dvfs which is used by mcu */ |
| mmio_write_32(PERI_SC_RESERVED8_ADDR, 0x0A001022); |
| |
| /* mcu mem is powered on, need de-assert reset */ |
| mmio_write_32(AO_SC_PERIPH_RSTDIS4, |
| AO_SC_PERIPH_RSTDIS4_RESET_MCU_ECTR_N); |
| |
| /* enable mcu hclk */ |
| mmio_write_32(AO_SC_PERIPH_CLKEN4, |
| AO_SC_PERIPH_CLKEN4_HCLK_MCU | |
| AO_SC_PERIPH_CLKEN4_CLK_MCU_DAP); |
| } |
| |
| void hisi_mcu_start_run(void) |
| { |
| unsigned int val; |
| |
| /* set mcu ddr remap configuration */ |
| mmio_write_32(AO_SC_MCU_SUBSYS_CTRL2, MCU_SYS_MEM_ADDR); |
| |
| /* de-assert reset for mcu and to run */ |
| mmio_write_32(AO_SC_PERIPH_RSTDIS4, |
| AO_SC_PERIPH_RSTDIS4_RESET_MCU_ECTR_N | |
| AO_SC_PERIPH_RSTDIS4_RESET_MCU_SYS_N | |
| AO_SC_PERIPH_RSTDIS4_RESET_MCU_POR_N | |
| AO_SC_PERIPH_RSTDIS4_RESET_MCU_DAP_N); |
| |
| val = mmio_read_32(AO_SC_SYS_CTRL2); |
| mmio_write_32(AO_SC_SYS_CTRL2, |
| val | AO_SC_SYS_CTRL2_GLB_SRST_STAT_CLEAR); |
| |
| INFO("%s: AO_SC_SYS_CTRL2=%x\n", __func__, |
| mmio_read_32(AO_SC_SYS_CTRL2)); |
| } |
| |
| int hisi_mcu_load_image(uintptr_t image_base, uint32_t image_size) |
| { |
| unsigned int i; |
| struct mcu_image_head *head; |
| char *buf; |
| |
| head = (struct mcu_image_head *)image_base; |
| if (is_binary_header_invalid(head, image_size)) { |
| ERROR("Invalid %s image header.\n", head->time_stamp); |
| return -1; |
| } |
| |
| buf = (char *)head; |
| for (i = 0; i < head->secs_num; i++) { |
| |
| int *src, *dst; |
| |
| /* check the sections */ |
| if (is_binary_section_invalid(&head->secs[i], head)) { |
| ERROR("Invalid mcu section.\n"); |
| return -1; |
| } |
| |
| /* check if the section is static-loaded */ |
| if (head->secs[i].load_attr != MCU_IMAGE_SEC_LOAD_STATIC) |
| continue; |
| |
| /* copy the sections */ |
| src = (int *)(intptr_t)(buf + head->secs[i].src_offset); |
| dst = (int *)(intptr_t)mcu2ap_addr(head->secs[i].dst_offset); |
| |
| memcpy((void *)dst, (void *)src, head->secs[i].size); |
| |
| INFO("%s: mcu sections %d:\n", __func__, i); |
| INFO("%s: src = 0x%x\n", |
| __func__, (unsigned int)(uintptr_t)src); |
| INFO("%s: dst = 0x%x\n", |
| __func__, (unsigned int)(uintptr_t)dst); |
| INFO("%s: size = %d\n", __func__, head->secs[i].size); |
| |
| INFO("%s: [SRC 0x%x] 0x%x 0x%x 0x%x 0x%x\n", |
| __func__, (unsigned int)(uintptr_t)src, |
| src[0], src[1], src[2], src[3]); |
| INFO("%s: [DST 0x%x] 0x%x 0x%x 0x%x 0x%x\n", |
| __func__, (unsigned int)(uintptr_t)dst, |
| dst[0], dst[1], dst[2], dst[3]); |
| } |
| |
| return 0; |
| } |