blob: cdd74a34c05cbc823b9795034e14560a568a942f [file] [log] [blame]
/*
* Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef __CONTEXT_H__
#define __CONTEXT_H__
#include <utils_def.h>
/*******************************************************************************
* Constants that allow assembler code to access members of and the 'gp_regs'
* structure at their correct offsets.
******************************************************************************/
#define CTX_GPREGS_OFFSET U(0x0)
#define CTX_GPREG_X0 U(0x0)
#define CTX_GPREG_X1 U(0x8)
#define CTX_GPREG_X2 U(0x10)
#define CTX_GPREG_X3 U(0x18)
#define CTX_GPREG_X4 U(0x20)
#define CTX_GPREG_X5 U(0x28)
#define CTX_GPREG_X6 U(0x30)
#define CTX_GPREG_X7 U(0x38)
#define CTX_GPREG_X8 U(0x40)
#define CTX_GPREG_X9 U(0x48)
#define CTX_GPREG_X10 U(0x50)
#define CTX_GPREG_X11 U(0x58)
#define CTX_GPREG_X12 U(0x60)
#define CTX_GPREG_X13 U(0x68)
#define CTX_GPREG_X14 U(0x70)
#define CTX_GPREG_X15 U(0x78)
#define CTX_GPREG_X16 U(0x80)
#define CTX_GPREG_X17 U(0x88)
#define CTX_GPREG_X18 U(0x90)
#define CTX_GPREG_X19 U(0x98)
#define CTX_GPREG_X20 U(0xa0)
#define CTX_GPREG_X21 U(0xa8)
#define CTX_GPREG_X22 U(0xb0)
#define CTX_GPREG_X23 U(0xb8)
#define CTX_GPREG_X24 U(0xc0)
#define CTX_GPREG_X25 U(0xc8)
#define CTX_GPREG_X26 U(0xd0)
#define CTX_GPREG_X27 U(0xd8)
#define CTX_GPREG_X28 U(0xe0)
#define CTX_GPREG_X29 U(0xe8)
#define CTX_GPREG_LR U(0xf0)
#define CTX_GPREG_SP_EL0 U(0xf8)
#define CTX_GPREGS_END U(0x100)
/*******************************************************************************
* Constants that allow assembler code to access members of and the 'el3_state'
* structure at their correct offsets. Note that some of the registers are only
* 32-bits wide but are stored as 64-bit values for convenience
******************************************************************************/
#define CTX_EL3STATE_OFFSET (CTX_GPREGS_OFFSET + CTX_GPREGS_END)
#define CTX_SCR_EL3 U(0x0)
#define CTX_ESR_EL3 U(0x8)
#define CTX_RUNTIME_SP U(0x10)
#define CTX_SPSR_EL3 U(0x18)
#define CTX_ELR_EL3 U(0x20)
#define CTX_UNUSED U(0x28)
#define CTX_EL3STATE_END U(0x30)
/*******************************************************************************
* Constants that allow assembler code to access members of and the
* 'el1_sys_regs' structure at their correct offsets. Note that some of the
* registers are only 32-bits wide but are stored as 64-bit values for
* convenience
******************************************************************************/
#define CTX_SYSREGS_OFFSET (CTX_EL3STATE_OFFSET + CTX_EL3STATE_END)
#define CTX_SPSR_EL1 U(0x0)
#define CTX_ELR_EL1 U(0x8)
#define CTX_SCTLR_EL1 U(0x10)
#define CTX_ACTLR_EL1 U(0x18)
#define CTX_CPACR_EL1 U(0x20)
#define CTX_CSSELR_EL1 U(0x28)
#define CTX_SP_EL1 U(0x30)
#define CTX_ESR_EL1 U(0x38)
#define CTX_TTBR0_EL1 U(0x40)
#define CTX_TTBR1_EL1 U(0x48)
#define CTX_MAIR_EL1 U(0x50)
#define CTX_AMAIR_EL1 U(0x58)
#define CTX_TCR_EL1 U(0x60)
#define CTX_TPIDR_EL1 U(0x68)
#define CTX_TPIDR_EL0 U(0x70)
#define CTX_TPIDRRO_EL0 U(0x78)
#define CTX_PAR_EL1 U(0x80)
#define CTX_FAR_EL1 U(0x88)
#define CTX_AFSR0_EL1 U(0x90)
#define CTX_AFSR1_EL1 U(0x98)
#define CTX_CONTEXTIDR_EL1 U(0xa0)
#define CTX_VBAR_EL1 U(0xa8)
#define CTX_PMCR_EL0 U(0xb0)
/*
* If the platform is AArch64-only, there is no need to save and restore these
* AArch32 registers.
*/
#if CTX_INCLUDE_AARCH32_REGS
#define CTX_SPSR_ABT U(0xc0) /* Align to the next 16 byte boundary */
#define CTX_SPSR_UND U(0xc8)
#define CTX_SPSR_IRQ U(0xd0)
#define CTX_SPSR_FIQ U(0xd8)
#define CTX_DACR32_EL2 U(0xe0)
#define CTX_IFSR32_EL2 U(0xe8)
#define CTX_TIMER_SYSREGS_OFF U(0xf0) /* Align to the next 16 byte boundary */
#else
#define CTX_TIMER_SYSREGS_OFF U(0xc0) /* Align to the next 16 byte boundary */
#endif /* __CTX_INCLUDE_AARCH32_REGS__ */
/*
* If the timer registers aren't saved and restored, we don't have to reserve
* space for them in the context
*/
#if NS_TIMER_SWITCH
#define CTX_CNTP_CTL_EL0 (CTX_TIMER_SYSREGS_OFF + U(0x0))
#define CTX_CNTP_CVAL_EL0 (CTX_TIMER_SYSREGS_OFF + U(0x8))
#define CTX_CNTV_CTL_EL0 (CTX_TIMER_SYSREGS_OFF + U(0x10))
#define CTX_CNTV_CVAL_EL0 (CTX_TIMER_SYSREGS_OFF + U(0x18))
#define CTX_CNTKCTL_EL1 (CTX_TIMER_SYSREGS_OFF + U(0x20))
#define CTX_SYSREGS_END (CTX_TIMER_SYSREGS_OFF + U(0x30)) /* Align to the next 16 byte boundary */
#else
#define CTX_SYSREGS_END CTX_TIMER_SYSREGS_OFF
#endif /* __NS_TIMER_SWITCH__ */
/*******************************************************************************
* Constants that allow assembler code to access members of and the 'fp_regs'
* structure at their correct offsets.
******************************************************************************/
#if CTX_INCLUDE_FPREGS
#define CTX_FPREGS_OFFSET (CTX_SYSREGS_OFFSET + CTX_SYSREGS_END)
#define CTX_FP_Q0 U(0x0)
#define CTX_FP_Q1 U(0x10)
#define CTX_FP_Q2 U(0x20)
#define CTX_FP_Q3 U(0x30)
#define CTX_FP_Q4 U(0x40)
#define CTX_FP_Q5 U(0x50)
#define CTX_FP_Q6 U(0x60)
#define CTX_FP_Q7 U(0x70)
#define CTX_FP_Q8 U(0x80)
#define CTX_FP_Q9 U(0x90)
#define CTX_FP_Q10 U(0xa0)
#define CTX_FP_Q11 U(0xb0)
#define CTX_FP_Q12 U(0xc0)
#define CTX_FP_Q13 U(0xd0)
#define CTX_FP_Q14 U(0xe0)
#define CTX_FP_Q15 U(0xf0)
#define CTX_FP_Q16 U(0x100)
#define CTX_FP_Q17 U(0x110)
#define CTX_FP_Q18 U(0x120)
#define CTX_FP_Q19 U(0x130)
#define CTX_FP_Q20 U(0x140)
#define CTX_FP_Q21 U(0x150)
#define CTX_FP_Q22 U(0x160)
#define CTX_FP_Q23 U(0x170)
#define CTX_FP_Q24 U(0x180)
#define CTX_FP_Q25 U(0x190)
#define CTX_FP_Q26 U(0x1a0)
#define CTX_FP_Q27 U(0x1b0)
#define CTX_FP_Q28 U(0x1c0)
#define CTX_FP_Q29 U(0x1d0)
#define CTX_FP_Q30 U(0x1e0)
#define CTX_FP_Q31 U(0x1f0)
#define CTX_FP_FPSR U(0x200)
#define CTX_FP_FPCR U(0x208)
#if CTX_INCLUDE_AARCH32_REGS
#define CTX_FP_FPEXC32_EL2 U(0x210)
#define CTX_FPREGS_END U(0x220) /* Align to the next 16 byte boundary */
#else
#define CTX_FPREGS_END U(0x210) /* Align to the next 16 byte boundary */
#endif
#endif
#ifndef __ASSEMBLY__
#include <cassert.h>
#include <platform_def.h> /* for CACHE_WRITEBACK_GRANULE */
#include <stdint.h>
/*
* Common constants to help define the 'cpu_context' structure and its
* members below.
*/
#define DWORD_SHIFT U(3)
#define DEFINE_REG_STRUCT(name, num_regs) \
typedef struct name { \
uint64_t _regs[num_regs]; \
} __aligned(16) name##_t
/* Constants to determine the size of individual context structures */
#define CTX_GPREG_ALL (CTX_GPREGS_END >> DWORD_SHIFT)
#define CTX_SYSREG_ALL (CTX_SYSREGS_END >> DWORD_SHIFT)
#if CTX_INCLUDE_FPREGS
#define CTX_FPREG_ALL (CTX_FPREGS_END >> DWORD_SHIFT)
#endif
#define CTX_EL3STATE_ALL (CTX_EL3STATE_END >> DWORD_SHIFT)
/*
* AArch64 general purpose register context structure. Usually x0-x18,
* lr are saved as the compiler is expected to preserve the remaining
* callee saved registers if used by the C runtime and the assembler
* does not touch the remaining. But in case of world switch during
* exception handling, we need to save the callee registers too.
*/
DEFINE_REG_STRUCT(gp_regs, CTX_GPREG_ALL);
/*
* AArch64 EL1 system register context structure for preserving the
* architectural state during switches from one security state to
* another in EL1.
*/
DEFINE_REG_STRUCT(el1_sys_regs, CTX_SYSREG_ALL);
/*
* AArch64 floating point register context structure for preserving
* the floating point state during switches from one security state to
* another.
*/
#if CTX_INCLUDE_FPREGS
DEFINE_REG_STRUCT(fp_regs, CTX_FPREG_ALL);
#endif
/*
* Miscellaneous registers used by EL3 firmware to maintain its state
* across exception entries and exits
*/
DEFINE_REG_STRUCT(el3_state, CTX_EL3STATE_ALL);
/*
* Macros to access members of any of the above structures using their
* offsets
*/
#define read_ctx_reg(ctx, offset) ((ctx)->_regs[offset >> DWORD_SHIFT])
#define write_ctx_reg(ctx, offset, val) (((ctx)->_regs[offset >> DWORD_SHIFT]) \
= val)
/*
* Top-level context structure which is used by EL3 firmware to
* preserve the state of a core at EL1 in one of the two security
* states and save enough EL3 meta data to be able to return to that
* EL and security state. The context management library will be used
* to ensure that SP_EL3 always points to an instance of this
* structure at exception entry and exit. Each instance will
* correspond to either the secure or the non-secure state.
*/
typedef struct cpu_context {
gp_regs_t gpregs_ctx;
el3_state_t el3state_ctx;
el1_sys_regs_t sysregs_ctx;
#if CTX_INCLUDE_FPREGS
fp_regs_t fpregs_ctx;
#endif
} cpu_context_t;
/* Macros to access members of the 'cpu_context_t' structure */
#define get_el3state_ctx(h) (&((cpu_context_t *) h)->el3state_ctx)
#if CTX_INCLUDE_FPREGS
#define get_fpregs_ctx(h) (&((cpu_context_t *) h)->fpregs_ctx)
#endif
#define get_sysregs_ctx(h) (&((cpu_context_t *) h)->sysregs_ctx)
#define get_gpregs_ctx(h) (&((cpu_context_t *) h)->gpregs_ctx)
/*
* Compile time assertions related to the 'cpu_context' structure to
* ensure that the assembler and the compiler view of the offsets of
* the structure members is the same.
*/
CASSERT(CTX_GPREGS_OFFSET == __builtin_offsetof(cpu_context_t, gpregs_ctx), \
assert_core_context_gp_offset_mismatch);
CASSERT(CTX_SYSREGS_OFFSET == __builtin_offsetof(cpu_context_t, sysregs_ctx), \
assert_core_context_sys_offset_mismatch);
#if CTX_INCLUDE_FPREGS
CASSERT(CTX_FPREGS_OFFSET == __builtin_offsetof(cpu_context_t, fpregs_ctx), \
assert_core_context_fp_offset_mismatch);
#endif
CASSERT(CTX_EL3STATE_OFFSET == __builtin_offsetof(cpu_context_t, el3state_ctx), \
assert_core_context_el3state_offset_mismatch);
/*
* Helper macro to set the general purpose registers that correspond to
* parameters in an aapcs_64 call i.e. x0-x7
*/
#define set_aapcs_args0(ctx, x0) do { \
write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X0, x0); \
} while (0)
#define set_aapcs_args1(ctx, x0, x1) do { \
write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X1, x1); \
set_aapcs_args0(ctx, x0); \
} while (0)
#define set_aapcs_args2(ctx, x0, x1, x2) do { \
write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X2, x2); \
set_aapcs_args1(ctx, x0, x1); \
} while (0)
#define set_aapcs_args3(ctx, x0, x1, x2, x3) do { \
write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X3, x3); \
set_aapcs_args2(ctx, x0, x1, x2); \
} while (0)
#define set_aapcs_args4(ctx, x0, x1, x2, x3, x4) do { \
write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X4, x4); \
set_aapcs_args3(ctx, x0, x1, x2, x3); \
} while (0)
#define set_aapcs_args5(ctx, x0, x1, x2, x3, x4, x5) do { \
write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X5, x5); \
set_aapcs_args4(ctx, x0, x1, x2, x3, x4); \
} while (0)
#define set_aapcs_args6(ctx, x0, x1, x2, x3, x4, x5, x6) do { \
write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X6, x6); \
set_aapcs_args5(ctx, x0, x1, x2, x3, x4, x5); \
} while (0)
#define set_aapcs_args7(ctx, x0, x1, x2, x3, x4, x5, x6, x7) do { \
write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X7, x7); \
set_aapcs_args6(ctx, x0, x1, x2, x3, x4, x5, x6); \
} while (0)
/*******************************************************************************
* Function prototypes
******************************************************************************/
void el1_sysregs_context_save(el1_sys_regs_t *regs);
void el1_sysregs_context_restore(el1_sys_regs_t *regs);
#if CTX_INCLUDE_FPREGS
void fpregs_context_save(fp_regs_t *regs);
void fpregs_context_restore(fp_regs_t *regs);
#endif
#undef CTX_SYSREG_ALL
#if CTX_INCLUDE_FPREGS
#undef CTX_FPREG_ALL
#endif
#undef CTX_GPREG_ALL
#undef CTX_EL3STATE_ALL
#endif /* __ASSEMBLY__ */
#endif /* __CONTEXT_H__ */