blob: c39907a892cf907f037f053179c6eaacb016534a [file] [log] [blame]
/*
* Copyright (c) 2014, ARM Limited and Contributors. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* Neither the name of ARM nor the names of its contributors may be used
* to endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <assert.h>
#include <platform.h>
#include <tzc400.h>
#include <debug.h>
/* Used to improve readability for configuring regions. */
#define FILTER_SHIFT(filter) (1 << filter)
/*
* For the moment we assume that all security programming is done by the
* primary core.
* TODO:
* Might want to enable interrupt on violations when supported?
*/
void plat_security_setup(void)
{
tzc_instance_t controller;
/*
* The Base FVP has a TrustZone address space controller, the Foundation
* FVP does not. Trying to program the device on the foundation FVP will
* cause an abort.
*
* If the platform had additional peripheral specific security
* configurations, those would be configured here.
*/
if (!platform_get_cfgvar(CONFIG_HAS_TZC))
return;
/*
* The TrustZone controller controls access to main DRAM. Give
* full NS access for the moment to use with OS.
*/
INFO("Configuring TrustZone Controller\n");
/*
* The driver does some error checking and will assert.
* - Provide base address of device on platform.
* - Provide width of ACE-Lite IDs on platform.
*/
controller.base = TZC400_BASE;
controller.aid_width = FVP_AID_WIDTH;
tzc_init(&controller);
/*
* Currently only filters 0 and 2 are connected on Base FVP.
* Filter 0 : CPU clusters (no access to DRAM by default)
* Filter 1 : not connected
* Filter 2 : LCDs (access to VRAM allowed by default)
* Filter 3 : not connected
* Programming unconnected filters will have no effect at the
* moment. These filter could, however, be connected in future.
* So care should be taken not to configure the unused filters.
*/
/* Disable all filters before programming. */
tzc_disable_filters(&controller);
/*
* Allow only non-secure access to all DRAM to supported devices.
* Give access to the CPUs and Virtio. Some devices
* would normally use the default ID so allow that too. We use
* two regions to cover the blocks of physical memory in the FVPs.
*
* Software executing in the secure state, such as a secure
* boot-loader, can access the DRAM by using the NS attributes in
* the MMU translation tables and descriptors.
*/
/* Set to cover the first block of DRAM */
tzc_configure_region(&controller, FILTER_SHIFT(0), 1,
DRAM_BASE, 0xFFFFFFFF, TZC_REGION_S_NONE,
TZC_REGION_ACCESS_RDWR(FVP_NSAID_DEFAULT) |
TZC_REGION_ACCESS_RDWR(FVP_NSAID_PCI) |
TZC_REGION_ACCESS_RDWR(FVP_NSAID_AP) |
TZC_REGION_ACCESS_RDWR(FVP_NSAID_VIRTIO) |
TZC_REGION_ACCESS_RDWR(FVP_NSAID_VIRTIO_OLD));
/* Set to cover the second block of DRAM */
tzc_configure_region(&controller, FILTER_SHIFT(0), 2,
0x880000000, 0xFFFFFFFFF, TZC_REGION_S_NONE,
TZC_REGION_ACCESS_RDWR(FVP_NSAID_DEFAULT) |
TZC_REGION_ACCESS_RDWR(FVP_NSAID_PCI) |
TZC_REGION_ACCESS_RDWR(FVP_NSAID_AP) |
TZC_REGION_ACCESS_RDWR(FVP_NSAID_VIRTIO) |
TZC_REGION_ACCESS_RDWR(FVP_NSAID_VIRTIO_OLD));
/*
* TODO: Interrupts are not currently supported. The only
* options we have are for access errors to occur quietly or to
* cause an exception. We choose to cause an exception.
*/
tzc_set_action(&controller, TZC_ACTION_ERR);
/* Enable filters. */
tzc_enable_filters(&controller);
}