| /* |
| * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <assert.h> |
| #include <string.h> |
| |
| #include <platform_def.h> |
| |
| #include <arch_helpers.h> |
| #include <common/bl_common.h> |
| #include <common/debug.h> |
| #include <drivers/console.h> |
| #include <lib/mmio.h> |
| #include <plat/common/platform.h> |
| |
| #include <hi6220.h> |
| #include <hi6553.h> |
| #include <hisi_sram_map.h> |
| |
| #define ACPU_FREQ_MAX_NUM 5 |
| #define ACPU_OPP_NUM 7 |
| |
| #define ACPU_VALID_VOLTAGE_MAGIC (0x5A5AC5C5) |
| |
| #define ACPU_WAIT_TIMEOUT (200) |
| #define ACPU_WAIT_FOR_WFI_TIMOUT (2000) |
| #define ACPU_DFS_STATE_CNT (0x10000) |
| |
| struct acpu_dvfs_sram_stru { |
| unsigned int magic; |
| unsigned int support_freq_num; |
| unsigned int support_freq_max; |
| unsigned int start_prof; |
| unsigned int vol[ACPU_OPP_NUM]; |
| }; |
| |
| struct acpu_volt_cal_para { |
| unsigned int freq; |
| unsigned int ul_vol; |
| unsigned int dl_vol; |
| unsigned int core_ref_hpm; |
| }; |
| |
| struct ddr_volt_cal_para { |
| unsigned int freq; |
| unsigned int ul_vol; |
| unsigned int dl_vol; |
| unsigned int ddr_ref_hpm; |
| }; |
| |
| struct acpu_dvfs_opp_para { |
| unsigned int freq; |
| unsigned int acpu_clk_profile0; |
| unsigned int acpu_clk_profile1; |
| unsigned int acpu_vol_profile; |
| unsigned int acpu_pll_freq; |
| unsigned int acpu_pll_frac; |
| }; |
| |
| unsigned int efuse_acpu_freq[] = { |
| 1200000, 1250000, 1300000, 1350000, |
| 1400000, 1450000, 1500000, 1550000, |
| 1600000, 1650000, 1700000, 1750000, |
| 1800000, 1850000, 1900000, 1950000, |
| }; |
| |
| struct acpu_dvfs_opp_para hi6220_acpu_profile[] = { |
| { 208000, 0x61E5, 0x022, 0x3A, 0x5220102B, 0x05555555 }, |
| { 432000, 0x10A6, 0x121, 0x3A, 0x5120102D, 0x10000005 }, |
| { 729000, 0x2283, 0x100, 0x4A, 0x51101026, 0x10000005 }, |
| { 960000, 0x1211, 0x100, 0x5B, 0x51101032, 0x10000005 }, |
| { 1200000, 0x1211, 0x100, 0x6B, 0x5110207D, 0x10000005 }, |
| { 1400000, 0x1211, 0x100, 0x6B, 0x51101049, 0x10000005 }, |
| { 1500000, 0x1211, 0x100, 0x6B, 0x51101049, 0x10000005 }, |
| }; |
| |
| struct acpu_dvfs_opp_para *acpu_dvfs_profile = hi6220_acpu_profile; |
| struct acpu_dvfs_sram_stru *acpu_dvfs_sram_buf = |
| (struct acpu_dvfs_sram_stru *)MEMORY_AXI_ACPU_FREQ_VOL_ADDR; |
| |
| static inline void write_reg_mask(uintptr_t addr, |
| uint32_t val, uint32_t mask) |
| { |
| uint32_t reg; |
| |
| reg = mmio_read_32(addr); |
| reg = (reg & ~(mask)) | val; |
| mmio_write_32(addr, reg); |
| } |
| |
| static inline uint32_t read_reg_mask(uintptr_t addr, |
| uint32_t mask, uint32_t offset) |
| { |
| uint32_t reg; |
| |
| reg = mmio_read_32(addr); |
| reg &= (mask << offset); |
| return (reg >> offset); |
| } |
| |
| static int acpu_dvfs_syspll_cfg(unsigned int prof_id) |
| { |
| uint32_t reg0 = 0; |
| uint32_t count = 0; |
| uint32_t clk_div_status = 0; |
| |
| /* |
| * step 1: |
| * - ACPUSYSPLLCFG.acpu_subsys_clk_div_sw = 0x3; |
| * - ACPUSYSPLLCFG.acpu_syspll_clken_cfg = 0x1; |
| */ |
| write_reg_mask(PMCTRL_ACPUSYSPLLCFG, 0x3 << 12, 0x3 << 12); |
| write_reg_mask(PMCTRL_ACPUSYSPLLCFG, 0x1 << 4, 0x1 << 4); |
| |
| /* |
| * step 2: |
| * - ACPUSYSPLLCFG.acpu_syspll_div_cfg: |
| * 208MHz, set to 0x5; |
| * 500MHz, set to 0x2; |
| * other opps set to 0x1 |
| */ |
| if (prof_id == 0) |
| write_reg_mask(PMCTRL_ACPUSYSPLLCFG, 0x5 << 0, 0x7 << 0); |
| else if (prof_id == 1) |
| write_reg_mask(PMCTRL_ACPUSYSPLLCFG, 0x2 << 0, 0x7 << 0); |
| else |
| write_reg_mask(PMCTRL_ACPUSYSPLLCFG, 0x1 << 0, 0x7 << 0); |
| |
| /* |
| * step 3: |
| * - Polling ACPU_SC_CPU_STAT.clk_div_status_vd == 0x3; |
| * - ACPU_SC_VD_CTRL.tune_en_dif = 0 |
| * - ACPU_SC_VD_CTRL.tune_en_int = 0 |
| * - PMCTRL_ACPUCLKDIV.acpu_ddr_clk_div_cfg = 0x1 |
| * - PMCTRL_ACPUPLLSEL.acpu_pllsw_cfg = 0x1 |
| */ |
| clk_div_status = 0x3; |
| do { |
| reg0 = read_reg_mask(ACPU_SC_CPU_STAT, 0x3, 20); |
| if ((count++) > ACPU_DFS_STATE_CNT) { |
| ERROR("%s: clk div status timeout!\n", __func__); |
| return -1; |
| } |
| } while (clk_div_status != reg0); |
| |
| write_reg_mask(ACPU_SC_VD_CTRL, 0x0, (0x1 << 0) | (0x1 << 11)); |
| write_reg_mask(PMCTRL_ACPUCLKDIV, 0x1 << 8, 0x3 << 8); |
| write_reg_mask(PMCTRL_ACPUPLLSEL, 0x1 << 0, 0x1 << 0); |
| |
| return 0; |
| } |
| |
| static void acpu_dvfs_clk_div_cfg(unsigned int prof_id, |
| unsigned int *cpuext_cfg, |
| unsigned int *acpu_ddr_cfg) |
| { |
| if (prof_id == 0) { |
| write_reg_mask(PMCTRL_ACPUCLKDIV, |
| (0x1 << SOC_PMCTRL_ACPUCLKDIV_cpuext_clk_div_cfg_START) | |
| (0x1 << SOC_PMCTRL_ACPUCLKDIV_acpu_ddr_clk_div_cfg_START), |
| (0x3 << SOC_PMCTRL_ACPUCLKDIV_cpuext_clk_div_cfg_START) | |
| (0x3 << SOC_PMCTRL_ACPUCLKDIV_acpu_ddr_clk_div_cfg_START)); |
| *cpuext_cfg = 0x1; |
| *acpu_ddr_cfg = 0x1; |
| } else if (prof_id == 1) { |
| write_reg_mask(PMCTRL_ACPUCLKDIV, |
| (0x1 << SOC_PMCTRL_ACPUCLKDIV_cpuext_clk_div_cfg_START) | |
| (0x1 << SOC_PMCTRL_ACPUCLKDIV_acpu_ddr_clk_div_cfg_START), |
| (0x3 << SOC_PMCTRL_ACPUCLKDIV_cpuext_clk_div_cfg_START) | |
| (0x3 << SOC_PMCTRL_ACPUCLKDIV_acpu_ddr_clk_div_cfg_START)); |
| *cpuext_cfg = 0x1; |
| *acpu_ddr_cfg = 0x1; |
| } else { |
| /* ddr has not been inited */ |
| write_reg_mask(PMCTRL_ACPUCLKDIV, |
| (0x1 << SOC_PMCTRL_ACPUCLKDIV_cpuext_clk_div_cfg_START) | |
| (0x0 << SOC_PMCTRL_ACPUCLKDIV_acpu_ddr_clk_div_cfg_START), |
| (0x3 << SOC_PMCTRL_ACPUCLKDIV_cpuext_clk_div_cfg_START) | |
| (0x3 << SOC_PMCTRL_ACPUCLKDIV_acpu_ddr_clk_div_cfg_START)); |
| *cpuext_cfg = 0x1; |
| *acpu_ddr_cfg = 0x0; |
| } |
| } |
| |
| static int acpu_dvfs_freq_ascend(unsigned int cur_prof, unsigned int tar_prof) |
| { |
| unsigned int reg0 = 0; |
| unsigned int reg1 = 0; |
| unsigned int reg2 = 0; |
| unsigned int count = 0; |
| unsigned int cpuext_cfg_val = 0; |
| unsigned int acpu_ddr_cfg_val = 0; |
| int ret = 0; |
| |
| /* |
| * step 1: |
| * - PMCTRL_ACPUSYSPLLCFG.acpu_subsys_clk_div_sw = 0x3; |
| * - ACPUSYSPLLCFG.acpu_syspll_clken_cfg = 0x1; |
| * |
| * step 2: |
| * - PMCTRL_ACPUSYSPLLCFG.acpu_syspll_div_cfg = 0x5 (208MHz) |
| * - PMCTRL_ACPUSYSPLLCFG.acpu_syspll_div_cfg = 0x2 (500MHz) |
| * - PMCTRL_ACPUSYSPLLCFG.acpu_syspll_div_cfg = 0x1 (Other OPPs) |
| * |
| * step 3: |
| * - ACPU_SC_CPU_STAT.clk_div_status_vd = 0x3; |
| * - ACPU_SC_VD_CTRL.tune_en_dif = 0x0; |
| * - ACPU_SC_VD_CTRL.tune_en_int = 0x0; |
| * - PMCTRL_ACPUCLKDIV.acpu_ddr_clk_div_cfg = 0x1; |
| * - PMCTRL_ACPUPLLSEL.acpu_pllsw_cfg = 0x1 |
| */ |
| ret = acpu_dvfs_syspll_cfg(cur_prof); |
| if (ret) |
| return -1; |
| |
| /* |
| * step 4: |
| * - Polling PMCTRL_ACPUPLLSEL.syspll_sw_stat == 0x1 |
| */ |
| count = 0; |
| do { |
| reg0 = read_reg_mask(PMCTRL_ACPUPLLSEL, 0x1, |
| SOC_PMCTRL_ACPUPLLSEL_syspll_sw_stat_START); |
| if ((count++) > ACPU_DFS_STATE_CNT) { |
| ERROR("%s: syspll sw status timeout\n", __func__); |
| return -1; |
| } |
| } while (reg0 != 0x1); |
| |
| /* Enable VD functionality if > 800MHz */ |
| if (acpu_dvfs_profile[tar_prof].freq > 800000) { |
| |
| write_reg_mask(ACPU_SC_VD_HPM_CTRL, |
| HPM_OSC_DIV_VAL, HPM_OSC_DIV_MASK); |
| |
| /* |
| * step 5: |
| * - ACPU_SC_VD_HPM_CTRL.hpm_dly_exp = 0xC7A; |
| * - ACPU_SC_VD_MASK_PATTERN_CTRL[12:0] = 0xCCB; |
| */ |
| write_reg_mask(ACPU_SC_VD_HPM_CTRL, |
| HPM_DLY_EXP_VAL, HPM_DLY_EXP_MASK); |
| write_reg_mask(ACPU_SC_VD_MASK_PATTERN_CTRL, |
| ACPU_SC_VD_MASK_PATTERN_VAL, |
| ACPU_SC_VD_MASK_PATTERN_MASK); |
| |
| /* |
| * step 6: |
| * - ACPU_SC_VD_DLY_TABLE0_CTRL = 0x1FFF; |
| * - ACPU_SC_VD_DLY_TABLE1_CTRL = 0x1FFFFFF; |
| * - ACPU_SC_VD_DLY_TABLE2_CTRL = 0x7FFFFFFF; |
| * - ACPU_SC_VD_DLY_FIXED_CTRL = 0x1; |
| */ |
| mmio_write_32(ACPU_SC_VD_DLY_TABLE0_CTRL, 0x1FFF); |
| mmio_write_32(ACPU_SC_VD_DLY_TABLE1_CTRL, 0x1FFFFFF); |
| mmio_write_32(ACPU_SC_VD_DLY_TABLE2_CTRL, 0x7FFFFFFF); |
| mmio_write_32(ACPU_SC_VD_DLY_FIXED_CTRL, 0x1); |
| |
| /* |
| * step 7: |
| * - ACPU_SC_VD_CTRL.shift_table0 = 0x1; |
| * - ACPU_SC_VD_CTRL.shift_table1 = 0x3; |
| * - ACPU_SC_VD_CTRL.shift_table2 = 0x5; |
| * - ACPU_SC_VD_CTRL.shift_table3 = 0x6; |
| * |
| * step 8: |
| * - ACPU_SC_VD_CTRL.tune = 0x7; |
| */ |
| write_reg_mask(ACPU_SC_VD_CTRL, |
| ACPU_SC_VD_SHIFT_TABLE_TUNE_VAL, |
| ACPU_SC_VD_SHIFT_TABLE_TUNE_MASK); |
| } |
| |
| /* step 9: ACPUPLLCTRL.acpupll_en_cfg = 0x0 */ |
| write_reg_mask(PMCTRL_ACPUPLLCTRL, 0x0, |
| 0x1 << SOC_PMCTRL_ACPUPLLCTRL_acpupll_en_cfg_START); |
| |
| /* step 10: set PMCTRL_ACPUPLLFREQ and PMCTRL_ACPUPLLFRAC */ |
| mmio_write_32(PMCTRL_ACPUPLLFREQ, |
| acpu_dvfs_profile[tar_prof].acpu_pll_freq); |
| mmio_write_32(PMCTRL_ACPUPLLFRAC, |
| acpu_dvfs_profile[tar_prof].acpu_pll_frac); |
| |
| /* |
| * step 11: |
| * - wait for 1us; |
| * - PMCTRL_ACPUPLLCTRL.acpupll_en_cfg = 0x1 |
| */ |
| count = 0; |
| while (count < ACPU_WAIT_TIMEOUT) |
| count++; |
| |
| write_reg_mask(PMCTRL_ACPUPLLCTRL, |
| 0x1 << SOC_PMCTRL_ACPUPLLCTRL_acpupll_en_cfg_START, |
| 0x1 << SOC_PMCTRL_ACPUPLLCTRL_acpupll_en_cfg_START); |
| |
| /* step 12: PMCTRL_ACPUVOLPMUADDR = 0x100da */ |
| mmio_write_32(PMCTRL_ACPUVOLPMUADDR, 0x100da); |
| |
| /* |
| * step 13: |
| * - PMCTRL_ACPUDESTVOL.acpu_dest_vol = 0x13 (208MHz); |
| * - PMCTRL_ACPUDESTVOL.acpu_dest_vol = 0x13 (500MHz); |
| * - PMCTRL_ACPUDESTVOL.acpu_dest_vol = 0x20 (798MHz); |
| * - PMCTRL_ACPUDESTVOL.acpu_dest_vol = 0x3A (1300MHz); |
| * - PMCTRL_ACPUDESTVOL.acpu_dest_vol = 0x3A (1500MHz); |
| */ |
| write_reg_mask(PMCTRL_ACPUDESTVOL, |
| acpu_dvfs_profile[tar_prof].acpu_vol_profile, |
| ((0x1 << (SOC_PMCTRL_ACPUDESTVOL_acpu_dest_vol_END + 1)) - 1)); |
| |
| /* |
| * step 14: |
| * - Polling PMCTRL_ACPUDESTVOL.acpu_vol_using == ACPUDESTVOL.acpu_dest_vol |
| * - Polling ACPUVOLTIMEOUT.acpu_vol_timeout == 0x1 |
| * - Config PMCTRL_ACPUCLKDIV.acpu_ddr_clk_div_cfg |
| * - Config ACPUCLKDIV.cpuext_clk_div_cfg; |
| */ |
| count = 0; |
| do { |
| reg0 = read_reg_mask(PMCTRL_ACPUDESTVOL, 0x7F, |
| SOC_PMCTRL_ACPUDESTVOL_acpu_dest_vol_START); |
| reg1 = read_reg_mask(PMCTRL_ACPUDESTVOL, 0x7F, |
| SOC_PMCTRL_ACPUDESTVOL_acpu_vol_using_START); |
| reg2 = read_reg_mask(PMCTRL_ACPUVOLTTIMEOUT, 0x1, |
| SOC_PMCTRL_ACPUVOLTIMEOUT_acpu_vol_timeout_START); |
| if ((count++) > ACPU_DFS_STATE_CNT) { |
| ERROR("%s: acpu destvol cfg timeout.\n", __func__); |
| return -1; |
| } |
| } while ((reg0 != reg1) || (reg2 != 0x1)); |
| |
| acpu_dvfs_clk_div_cfg(tar_prof, &cpuext_cfg_val, &acpu_ddr_cfg_val); |
| |
| /* |
| * step 15: |
| * - Polling PMCTRL_ACPUCLKDIV.cpuext_clk_div_stat; |
| * - Polling ACPUCLKDIV.acpu_ddr_clk_div_stat; |
| * - ACPUPLLCTRL.acpupll_timeout = 0x1; |
| * - PMCTRL_ACPUPLLSEL.acpu_pllsw_cfg = 0x0; |
| */ |
| count = 0; |
| do { |
| reg0 = read_reg_mask(PMCTRL_ACPUCLKDIV, 0x3, |
| SOC_PMCTRL_ACPUCLKDIV_acpu_ddr_clk_div_stat_START); |
| reg1 = read_reg_mask(PMCTRL_ACPUCLKDIV, 0x3, |
| SOC_PMCTRL_ACPUCLKDIV_cpuext_clk_div_stat_START); |
| reg2 = read_reg_mask(PMCTRL_ACPUPLLCTRL, 0x1, |
| SOC_PMCTRL_ACPUPLLCTRL_acpupll_timeout_START); |
| if ((count++) > ACPU_DFS_STATE_CNT) { |
| ERROR("%s: acpu clk div cfg timeout.\n", __func__); |
| return -1; |
| } |
| } while ((reg1 != cpuext_cfg_val) || |
| (reg0 != acpu_ddr_cfg_val) || |
| (reg2 != 0x1)); |
| |
| write_reg_mask(PMCTRL_ACPUPLLSEL, 0x0, |
| 0x1 << SOC_PMCTRL_ACPUPLLSEL_acpu_pllsw_cfg_START); |
| |
| /* |
| * step 16: |
| * - Polling PMCTRL_ACPUPLLSEL.acpupll_sw_stat == 0x1; |
| * - ACPU_SC_VD_CTRL.force_clk_en = 0x0; |
| * - ACPU_SC_VD_CTRL.clk_dis_cnt_en = 0x0; |
| * - ACPU_SC_VD_CTRL.calibrate_en_ini = 0x0; |
| * - ACPU_SC_VD_CTRL.calibrate_en_dif = 0x0; |
| * - ACPU_SC_VD_CTRL.div_en_dif = 0x1; |
| * - ACPU_SC_VD_CTRL.tune_en_int = 0x1; |
| * - ACPU_SC_VD_CTRL.tune_en_dif = 0x1; |
| * - PMCTRL_ACPUSYSPLLCFG.acpu_subsys_clk_div_sw = 0x0; |
| * - ACPUSYSPLLCFG.acpu_syspll_clken_cfg = 0x0; |
| */ |
| count = 0; |
| do { |
| reg0 = read_reg_mask(PMCTRL_ACPUPLLSEL, 0x1, |
| SOC_PMCTRL_ACPUPLLSEL_acpu_pllsw_stat_START); |
| if ((count++) > ACPU_DFS_STATE_CNT) { |
| ERROR("%s: acpu pll sw status timeout.\n", __func__); |
| return -1; |
| } |
| } while (reg0 != 0x1); |
| |
| if (acpu_dvfs_profile[tar_prof].freq > 800000) |
| write_reg_mask(ACPU_SC_VD_CTRL, |
| ACPU_SC_VD_EN_ASIC_VAL, ACPU_SC_VD_EN_MASK); |
| |
| write_reg_mask(PMCTRL_ACPUSYSPLLCFG, 0x0, |
| (0x3 << SOC_PMCTRL_ACPUSYSPLLCFG_acpu_subsys_clk_div_sw_START) | |
| (0x1 << SOC_PMCTRL_ACPUSYSPLLCFG_acpu_syspll_clken_cfg_START)); |
| |
| return 0; |
| } |
| |
| static int acpu_dvfs_freq_descend(unsigned int cur_prof, unsigned int tar_prof) |
| { |
| unsigned int reg0 = 0; |
| unsigned int reg1 = 0; |
| unsigned int reg2 = 0; |
| unsigned int count = 0; |
| unsigned int cpuext_cfg_val = 0; |
| unsigned int acpu_ddr_cfg_val = 0; |
| int ret = 0; |
| |
| ret = acpu_dvfs_syspll_cfg(tar_prof); |
| if (ret) |
| return -1; |
| |
| /* |
| * step 4: |
| * - Polling PMCTRL_ACPUPLLSEL.syspll_sw_stat == 0x1 |
| */ |
| count = 0; |
| do { |
| reg0 = read_reg_mask(PMCTRL_ACPUPLLSEL, 0x1, 2); |
| if ((count++) > ACPU_DFS_STATE_CNT) { |
| ERROR("%s: syspll sw status timeout.\n", __func__); |
| return -1; |
| } |
| } while (reg0 != 0x1); |
| |
| /* |
| * Step 5: |
| * - PMCTRL_ACPUPLLCTRL.acpupll_en_cfg = 0x0 |
| */ |
| write_reg_mask(PMCTRL_ACPUPLLCTRL, 0x0, 0x1 << 0); |
| |
| /* |
| * step 6 |
| * - Config PMCTRL_ACPUPLLFREQ and ACPUPLLFRAC |
| */ |
| mmio_write_32(PMCTRL_ACPUPLLFREQ, acpu_dvfs_profile[tar_prof].acpu_pll_freq); |
| mmio_write_32(PMCTRL_ACPUPLLFRAC, acpu_dvfs_profile[tar_prof].acpu_pll_frac); |
| |
| /* |
| * step 7: |
| * - Wait 1us; |
| * - Config PMCTRL_ACPUPLLCTRL.acpupll_en_cfg = 0x1 |
| */ |
| count = 0; |
| while (count < ACPU_WAIT_TIMEOUT) |
| count++; |
| |
| write_reg_mask(PMCTRL_ACPUPLLCTRL, |
| 0x1 << SOC_PMCTRL_ACPUPLLCTRL_acpupll_en_cfg_START, |
| 0x1 << SOC_PMCTRL_ACPUPLLCTRL_acpupll_en_cfg_START); |
| |
| /* Enable VD functionality if > 800MHz */ |
| if (acpu_dvfs_profile[tar_prof].freq > 800000) { |
| |
| write_reg_mask(ACPU_SC_VD_HPM_CTRL, |
| HPM_OSC_DIV_VAL, HPM_OSC_DIV_MASK); |
| |
| /* |
| * step 9: |
| * - ACPU_SC_VD_HPM_CTRL.hpm_dly_exp = 0xC7A; |
| * - ACPU_SC_VD_MASK_PATTERN_CTRL[12:0] = 0xCCB; |
| */ |
| write_reg_mask(ACPU_SC_VD_HPM_CTRL, |
| HPM_DLY_EXP_VAL, HPM_DLY_EXP_MASK); |
| write_reg_mask(ACPU_SC_VD_MASK_PATTERN_CTRL, |
| ACPU_SC_VD_MASK_PATTERN_VAL, |
| ACPU_SC_VD_MASK_PATTERN_MASK); |
| |
| /* |
| * step 10: |
| * - ACPU_SC_VD_DLY_TABLE0_CTRL = 0x1FFF; |
| * - ACPU_SC_VD_DLY_TABLE1_CTRL = 0x1FFFFFF; |
| * - ACPU_SC_VD_DLY_TABLE2_CTRL = 0x7FFFFFFF; |
| * - ACPU_SC_VD_DLY_FIXED_CTRL = 0x1; |
| */ |
| mmio_write_32(ACPU_SC_VD_DLY_TABLE0_CTRL, 0x1FFF); |
| mmio_write_32(ACPU_SC_VD_DLY_TABLE1_CTRL, 0x1FFFFFF); |
| mmio_write_32(ACPU_SC_VD_DLY_TABLE2_CTRL, 0x7FFFFFFF); |
| mmio_write_32(ACPU_SC_VD_DLY_FIXED_CTRL, 0x1); |
| |
| /* |
| * step 11: |
| * - ACPU_SC_VD_CTRL.shift_table0 = 0x1; |
| * - ACPU_SC_VD_CTRL.shift_table1 = 0x3; |
| * - ACPU_SC_VD_CTRL.shift_table2 = 0x5; |
| * - ACPU_SC_VD_CTRL.shift_table3 = 0x6; |
| * |
| * step 12: |
| * - ACPU_SC_VD_CTRL.tune = 0x7; |
| */ |
| write_reg_mask(ACPU_SC_VD_CTRL, |
| ACPU_SC_VD_SHIFT_TABLE_TUNE_VAL, |
| ACPU_SC_VD_SHIFT_TABLE_TUNE_MASK); |
| } |
| |
| /* |
| * step 13: |
| * - Pollig PMCTRL_ACPUPLLCTRL.acpupll_timeout == 0x1; |
| * - PMCTRL_ACPUPLLSEL.acpu_pllsw_cfg = 0x0; |
| */ |
| count = 0; |
| do { |
| reg0 = read_reg_mask(PMCTRL_ACPUPLLCTRL, 0x1, |
| SOC_PMCTRL_ACPUPLLCTRL_acpupll_timeout_START); |
| if ((count++) > ACPU_DFS_STATE_CNT) { |
| ERROR("%s: acpupll timeout.\n", __func__); |
| return -1; |
| } |
| } while (reg0 != 0x1); |
| |
| write_reg_mask(PMCTRL_ACPUPLLSEL, 0x0, |
| 0x1 << SOC_PMCTRL_ACPUPLLSEL_acpu_pllsw_cfg_START); |
| |
| /* |
| * step 14: |
| * - Polling PMCTRL_ACPUPLLSEL.acpupll_sw_stat == 0x1; |
| * - ACPU_SC_VD_CTRL.force_clk_en = 0x0; |
| * - ACPU_SC_VD_CTRL.clk_dis_cnt_en = 0x0; |
| * - ACPU_SC_VD_CTRL.calibrate_en_ini = 0x0; |
| * - ACPU_SC_VD_CTRL.calibrate_en_dif = 0x0; |
| * - ACPU_SC_VD_CTRL.div_en_dif = 0x1; |
| * - ACPU_SC_VD_CTRL.tune_en_int = 0x1; |
| * - ACPU_SC_VD_CTRL.tune_en_dif = 0x1; |
| */ |
| count = 0; |
| do { |
| reg0 = read_reg_mask(PMCTRL_ACPUPLLSEL, 0x1, |
| SOC_PMCTRL_ACPUPLLSEL_acpu_pllsw_stat_START); |
| if ((count++) > ACPU_DFS_STATE_CNT) { |
| ERROR("%s: acpupll sw status timeout.\n", __func__); |
| return -1; |
| } |
| } while (reg0 != 0x1); |
| |
| if (acpu_dvfs_profile[tar_prof].freq > 800000) |
| write_reg_mask(ACPU_SC_VD_CTRL, |
| ACPU_SC_VD_EN_ASIC_VAL, ACPU_SC_VD_EN_MASK); |
| |
| /* |
| * step 15: |
| * - PMCTRL_ACPUSYSPLLCFG.acpu_subsys_clk_div_sw = 0x0; |
| * - ACPUSYSPLLCFG.acpu_syspll_clken_cfg = 0x0; |
| */ |
| write_reg_mask(PMCTRL_ACPUSYSPLLCFG, 0x0, |
| (0x3 << SOC_PMCTRL_ACPUSYSPLLCFG_acpu_subsys_clk_div_sw_START) | |
| (0x1 << SOC_PMCTRL_ACPUSYSPLLCFG_acpu_syspll_clken_cfg_START)); |
| |
| /* |
| * step 16: |
| * - Polling ACPU_SC_CPU_STAT.clk_div_status_vd == 0x0; |
| */ |
| count = 0; |
| do { |
| reg0 = read_reg_mask(ACPU_SC_CPU_STAT, 0x3, |
| ACPU_SC_CPU_STAT_CLK_DIV_STATUS_VD_SHIFT); |
| if ((count++) > ACPU_DFS_STATE_CNT) { |
| ERROR("%s: clk div status timeout.\n", __func__); |
| return -1; |
| } |
| } while (reg0 != 0x0); |
| |
| acpu_dvfs_clk_div_cfg(tar_prof, &cpuext_cfg_val, &acpu_ddr_cfg_val); |
| |
| /* |
| * step 17: |
| * - Polling PMCTRL_ACPUCLKDIV.cpuext_clk_div_stat; |
| * - Polling ACPUCLKDIV.acpu_ddr_clk_div_stat; |
| * - PMCTRL_ACPUVOLPMUADDR = 0x1006C; |
| */ |
| count = 0; |
| do { |
| reg0 = read_reg_mask(PMCTRL_ACPUCLKDIV, 0x3, |
| SOC_PMCTRL_ACPUCLKDIV_cpuext_clk_div_stat_START); |
| reg1 = read_reg_mask(PMCTRL_ACPUCLKDIV, 0x3, |
| SOC_PMCTRL_ACPUCLKDIV_acpu_ddr_clk_div_stat_START); |
| if ((count++) > ACPU_DFS_STATE_CNT) { |
| ERROR("%s: acpu clk div cfg timeout.\n", __func__); |
| return -1; |
| } |
| } while ((reg0 != cpuext_cfg_val) || (reg1 != acpu_ddr_cfg_val)); |
| |
| mmio_write_32(PMCTRL_ACPUVOLPMUADDR, 0x100da); |
| |
| /* |
| * step 16: |
| * - Polling PMCTRL_ACPUPLLSEL.acpupll_sw_stat == 0x1; |
| * - ACPU_SC_VD_CTRL.force_clk_en = 0x0; |
| * - ACPU_SC_VD_CTRL.clk_dis_cnt_en = 0x0; |
| * - ACPU_SC_VD_CTRL.calibrate_en_ini = 0x0; |
| * - ACPU_SC_VD_CTRL.calibrate_en_dif = 0x0; |
| * - ACPU_SC_VD_CTRL.div_en_dif = 0x1; |
| * - ACPU_SC_VD_CTRL.tune_en_int = 0x1; |
| * - ACPU_SC_VD_CTRL.tune_en_dif = 0x1; |
| * - PMCTRL_ACPUSYSPLLCFG.acpu_subsys_clk_div_sw = 0x0; |
| * - ACPUSYSPLLCFG.acpu_syspll_clken_cfg = 0x0; |
| */ |
| write_reg_mask(PMCTRL_ACPUDESTVOL, |
| acpu_dvfs_profile[tar_prof].acpu_vol_profile, |
| ((0x1 << (SOC_PMCTRL_ACPUDESTVOL_acpu_dest_vol_END + 1)) - 1)); |
| |
| /* |
| * step 19: |
| * - Polling PMCTRL_ACPUDESTVOL.acpu_vol_using == ACPUDESTVOL.acpu_dest_vol |
| * - ACPUVOLTIMEOUT.acpu_vol_timeout = 0x1; |
| */ |
| count = 0; |
| do { |
| reg0 = read_reg_mask(PMCTRL_ACPUDESTVOL, 0x7F, |
| SOC_PMCTRL_ACPUDESTVOL_acpu_dest_vol_START); |
| reg1 = read_reg_mask(PMCTRL_ACPUDESTVOL, 0x7F, |
| SOC_PMCTRL_ACPUDESTVOL_acpu_vol_using_START); |
| reg2 = read_reg_mask(PMCTRL_ACPUVOLTTIMEOUT, 0x1, |
| SOC_PMCTRL_ACPUVOLTIMEOUT_acpu_vol_timeout_START); |
| if ((count++) > ACPU_DFS_STATE_CNT) { |
| ERROR("%s: acpu destvol cfg timeout.\n", __func__); |
| return -1; |
| } |
| } while ((reg0 != reg1) || (reg2 != 0x1)); |
| |
| return 0; |
| } |
| |
| int acpu_dvfs_target(unsigned int curr_prof, unsigned int target_prof) |
| { |
| int ret = 0; |
| |
| if (curr_prof == target_prof) { |
| INFO("%s: target_prof is equal curr_prof: is %d!\n", |
| __func__, curr_prof); |
| return 0; |
| } |
| |
| if ((curr_prof >= ACPU_FREQ_MAX_NUM) || |
| (target_prof >= ACPU_FREQ_MAX_NUM)) { |
| INFO("%s: invalid parameter %d %d\n", |
| __func__, curr_prof, target_prof); |
| return -1; |
| } |
| |
| if (target_prof > acpu_dvfs_sram_buf->support_freq_num) |
| target_prof = acpu_dvfs_sram_buf->support_freq_num; |
| |
| if (target_prof < curr_prof) |
| ret = acpu_dvfs_freq_descend(curr_prof, target_prof); |
| else if (target_prof > curr_prof) |
| ret = acpu_dvfs_freq_ascend(curr_prof, target_prof); |
| |
| if (ret) { |
| ERROR("%s: acpu_dvfs_target failed!\n", __func__); |
| return -1; |
| } |
| |
| /* Complete acpu dvfs setting and set magic number */ |
| acpu_dvfs_sram_buf->start_prof = target_prof; |
| acpu_dvfs_sram_buf->magic = ACPU_VALID_VOLTAGE_MAGIC; |
| |
| mmio_write_32(DDR_DFS_FREQ_ADDR, 800000); |
| return 0; |
| } |
| |
| static int acpu_dvfs_set_freq(void) |
| { |
| unsigned int i; |
| unsigned int curr_prof; |
| unsigned int target_prof; |
| unsigned int max_freq = 0; |
| |
| max_freq = acpu_dvfs_sram_buf->support_freq_max; |
| |
| for (i = 0; i < acpu_dvfs_sram_buf->support_freq_num; i++) { |
| |
| if (max_freq == hi6220_acpu_profile[i].freq) { |
| target_prof = i; |
| break; |
| } |
| } |
| |
| if (i == acpu_dvfs_sram_buf->support_freq_num) { |
| ERROR("%s: cannot found max freq profile\n", __func__); |
| return -1; |
| } |
| |
| curr_prof = 0; |
| target_prof = i; |
| |
| /* if max freq is 208MHz, do nothing */ |
| if (curr_prof == target_prof) |
| return 0; |
| |
| if (acpu_dvfs_target(curr_prof, target_prof)) { |
| ERROR("%s: set acpu freq failed!", __func__); |
| return -1; |
| } |
| |
| INFO("%s: support freq num is %d\n", |
| __func__, acpu_dvfs_sram_buf->support_freq_num); |
| INFO("%s: start prof is 0x%x\n", |
| __func__, acpu_dvfs_sram_buf->start_prof); |
| INFO("%s: magic is 0x%x\n", |
| __func__, acpu_dvfs_sram_buf->magic); |
| INFO("%s: voltage:\n", __func__); |
| for (i = 0; i < acpu_dvfs_sram_buf->support_freq_num; i++) |
| INFO(" - %d: 0x%x\n", i, acpu_dvfs_sram_buf->vol[i]); |
| |
| NOTICE("%s: set acpu freq success!", __func__); |
| return 0; |
| } |
| |
| struct acpu_dvfs_volt_setting { |
| unsigned int magic; |
| unsigned int support_freq_num; |
| unsigned int support_freq_max; |
| unsigned int start_prof; |
| unsigned int vol[7]; |
| unsigned int hmp_dly_threshold[7]; |
| }; |
| |
| static void acpu_dvfs_volt_init(void) |
| { |
| struct acpu_dvfs_volt_setting *volt; |
| |
| /* |
| * - set default voltage; |
| * - set pmu address; |
| * - set voltage up and down step; |
| * - set voltage stable time; |
| */ |
| mmio_write_32(PMCTRL_ACPUDFTVOL, 0x4a); |
| mmio_write_32(PMCTRL_ACPUVOLPMUADDR, 0xda); |
| mmio_write_32(PMCTRL_ACPUVOLUPSTEP, 0x1); |
| mmio_write_32(PMCTRL_ACPUVOLDNSTEP, 0x1); |
| mmio_write_32(PMCTRL_ACPUPMUVOLUPTIME, 0x60); |
| mmio_write_32(PMCTRL_ACPUPMUVOLDNTIME, 0x60); |
| mmio_write_32(PMCTRL_ACPUCLKOFFCFG, 0x1000); |
| |
| volt = (void *)MEMORY_AXI_ACPU_FREQ_VOL_ADDR; |
| volt->magic = 0x5a5ac5c5; |
| volt->support_freq_num = 5; |
| volt->support_freq_max = 1200000; |
| volt->start_prof = 4; |
| volt->vol[0] = 0x49; |
| volt->vol[1] = 0x49; |
| volt->vol[2] = 0x50; |
| volt->vol[3] = 0x60; |
| volt->vol[4] = 0x78; |
| volt->vol[5] = 0x78; |
| volt->vol[6] = 0x78; |
| |
| volt->hmp_dly_threshold[0] = 0x0; |
| volt->hmp_dly_threshold[1] = 0x0; |
| volt->hmp_dly_threshold[2] = 0x0; |
| volt->hmp_dly_threshold[3] = 0x0e8b0e45; |
| volt->hmp_dly_threshold[4] = 0x10691023; |
| volt->hmp_dly_threshold[5] = 0x10691023; |
| volt->hmp_dly_threshold[6] = 0x10691023; |
| |
| INFO("%s: success!\n", __func__); |
| } |
| |
| void init_acpu_dvfs(void) |
| { |
| unsigned int i = 0; |
| |
| INFO("%s: pmic version %d\n", __func__, |
| mmio_read_8(HI6553_VERSION_REG)); |
| |
| /* init parameters */ |
| mmio_write_32(ACPU_CHIP_MAX_FREQ, efuse_acpu_freq[8]); |
| INFO("%s: ACPU_CHIP_MAX_FREQ=0x%x.\n", |
| __func__, mmio_read_32(ACPU_CHIP_MAX_FREQ)); |
| |
| /* set maximum support frequency to 1.2GHz */ |
| for (i = 0; i < ACPU_FREQ_MAX_NUM; i++) |
| acpu_dvfs_sram_buf->vol[i] = hi6220_acpu_profile[i].acpu_vol_profile; |
| |
| acpu_dvfs_sram_buf->support_freq_num = ACPU_FREQ_MAX_NUM; |
| acpu_dvfs_sram_buf->support_freq_max = 1200000; |
| |
| /* init acpu dvfs */ |
| acpu_dvfs_volt_init(); |
| acpu_dvfs_set_freq(); |
| } |