blob: 714ab80c51573d414c11c80afc9b0df2dd965c17 [file] [log] [blame]
/*
* Copyright (c) 2019-2022, STMicroelectronics - All Rights Reserved
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <errno.h>
#include <common/debug.h>
#include <drivers/nand.h>
#include <drivers/raw_nand.h>
#include <drivers/spi_nand.h>
#include <drivers/spi_nor.h>
#include <lib/utils.h>
#include <plat/common/platform.h>
#define SZ_512 0x200U
#define SZ_64M 0x4000000U
#if STM32MP_RAW_NAND || STM32MP_SPI_NAND
static int get_data_from_otp(struct nand_device *nand_dev, bool is_slc)
{
uint32_t nand_param;
/* Check if NAND parameters are stored in OTP */
if (stm32_get_otp_value(NAND_OTP, &nand_param) != 0) {
ERROR("BSEC: NAND_OTP Error\n");
return -EACCES;
}
if (nand_param == 0U) {
return 0;
}
if ((nand_param & NAND_PARAM_STORED_IN_OTP) == 0U) {
goto ecc;
}
/* NAND parameter shall be read from OTP */
if ((nand_param & NAND_WIDTH_MASK) != 0U) {
nand_dev->buswidth = NAND_BUS_WIDTH_16;
} else {
nand_dev->buswidth = NAND_BUS_WIDTH_8;
}
switch ((nand_param & NAND_PAGE_SIZE_MASK) >> NAND_PAGE_SIZE_SHIFT) {
case NAND_PAGE_SIZE_2K:
nand_dev->page_size = 0x800U;
break;
case NAND_PAGE_SIZE_4K:
nand_dev->page_size = 0x1000U;
break;
case NAND_PAGE_SIZE_8K:
nand_dev->page_size = 0x2000U;
break;
default:
ERROR("Cannot read NAND page size\n");
return -EINVAL;
}
switch ((nand_param & NAND_BLOCK_SIZE_MASK) >> NAND_BLOCK_SIZE_SHIFT) {
case NAND_BLOCK_SIZE_64_PAGES:
nand_dev->block_size = 64U * nand_dev->page_size;
break;
case NAND_BLOCK_SIZE_128_PAGES:
nand_dev->block_size = 128U * nand_dev->page_size;
break;
case NAND_BLOCK_SIZE_256_PAGES:
nand_dev->block_size = 256U * nand_dev->page_size;
break;
default:
ERROR("Cannot read NAND block size\n");
return -EINVAL;
}
nand_dev->size = ((nand_param & NAND_BLOCK_NB_MASK) >>
NAND_BLOCK_NB_SHIFT) *
NAND_BLOCK_NB_UNIT * nand_dev->block_size;
ecc:
if (is_slc) {
switch ((nand_param & NAND_ECC_BIT_NB_MASK) >>
NAND_ECC_BIT_NB_SHIFT) {
case NAND_ECC_BIT_NB_1_BITS:
nand_dev->ecc.max_bit_corr = 1U;
break;
case NAND_ECC_BIT_NB_4_BITS:
nand_dev->ecc.max_bit_corr = 4U;
break;
case NAND_ECC_BIT_NB_8_BITS:
nand_dev->ecc.max_bit_corr = 8U;
break;
case NAND_ECC_ON_DIE:
nand_dev->ecc.mode = NAND_ECC_ONDIE;
break;
default:
if (nand_dev->ecc.max_bit_corr == 0U) {
ERROR("No valid eccbit number\n");
return -EINVAL;
}
}
} else {
/* Selected multiple plane NAND */
if ((nand_param & NAND_PLANE_BIT_NB_MASK) != 0U) {
nand_dev->nb_planes = 2U;
} else {
nand_dev->nb_planes = 1U;
}
}
VERBOSE("OTP: Block %i Page %i Size %lli\n", nand_dev->block_size,
nand_dev->page_size, nand_dev->size);
return 0;
}
#endif /* STM32MP_RAW_NAND || STM32MP_SPI_NAND */
#if STM32MP_RAW_NAND
int plat_get_raw_nand_data(struct rawnand_device *device)
{
device->nand_dev->ecc.mode = NAND_ECC_HW;
device->nand_dev->ecc.size = SZ_512;
return get_data_from_otp(device->nand_dev, true);
}
#endif
#if STM32MP_SPI_NAND
int plat_get_spi_nand_data(struct spinand_device *device)
{
zeromem(&device->spi_read_cache_op, sizeof(struct spi_mem_op));
device->spi_read_cache_op.cmd.opcode = SPI_NAND_OP_READ_FROM_CACHE_4X;
device->spi_read_cache_op.cmd.buswidth = SPI_MEM_BUSWIDTH_1_LINE;
device->spi_read_cache_op.addr.nbytes = 2U;
device->spi_read_cache_op.addr.buswidth = SPI_MEM_BUSWIDTH_1_LINE;
device->spi_read_cache_op.dummy.nbytes = 1U;
device->spi_read_cache_op.dummy.buswidth = SPI_MEM_BUSWIDTH_1_LINE;
device->spi_read_cache_op.data.buswidth = SPI_MEM_BUSWIDTH_4_LINE;
device->spi_read_cache_op.data.dir = SPI_MEM_DATA_IN;
return get_data_from_otp(device->nand_dev, false);
}
#endif
#if STM32MP_SPI_NOR
int plat_get_nor_data(struct nor_device *device)
{
device->size = SZ_64M;
zeromem(&device->read_op, sizeof(struct spi_mem_op));
device->read_op.cmd.opcode = SPI_NOR_OP_READ_1_1_4;
device->read_op.cmd.buswidth = SPI_MEM_BUSWIDTH_1_LINE;
device->read_op.addr.nbytes = 3U;
device->read_op.addr.buswidth = SPI_MEM_BUSWIDTH_1_LINE;
device->read_op.dummy.nbytes = 1U;
device->read_op.dummy.buswidth = SPI_MEM_BUSWIDTH_1_LINE;
device->read_op.data.buswidth = SPI_MEM_BUSWIDTH_4_LINE;
device->read_op.data.dir = SPI_MEM_DATA_IN;
return 0;
}
#endif