| /* |
| * Copyright (c) 2015-2023, ARM Limited and Contributors. All rights reserved. |
| * |
| * Copyright (C) 2017-2023 Nuvoton Ltd. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #ifndef NPCM845x_ARM_DEF_H |
| #define NPCM845x_ARM_DEF_H |
| |
| #include <arch.h> |
| #include <common/interrupt_props.h> |
| #include <common/tbbr/tbbr_img_def.h> |
| #include <drivers/arm/gic_common.h> |
| #include <lib/utils_def.h> |
| #include <lib/xlat_tables/xlat_tables_defs.h> |
| #include <plat/arm/common/smccc_def.h> |
| #include <plat/common/common_def.h> |
| |
| /* This flag will add zones to the MMU so that it will be possible to debug */ |
| #ifdef NPCM845X_DEBUG |
| #define ALLOW_DEBUG_MMU |
| #undef ALLOW_DEBUG_MMU |
| #endif /* NPCM845X_DEBUG */ |
| |
| #undef CONFIG_TARGET_ARBEL_PALLADIUM |
| /****************************************************************************** |
| * Definitions common to all ARM standard platforms |
| *****************************************************************************/ |
| |
| /* |
| * Root of trust key hash lengths |
| */ |
| #define ARM_ROTPK_HEADER_LEN 19 |
| #define ARM_ROTPK_HASH_LEN 32 |
| |
| /* Special value used to verify platform parameters from BL2 to BL31 */ |
| #define ARM_BL31_PLAT_PARAM_VAL ULL(0x0f1e2d3c4b5a6978) |
| |
| /* No need for system because we have only one cluster */ |
| #define ARM_SYSTEM_COUNT U(0) |
| |
| #define ARM_CACHE_WRITEBACK_SHIFT 6 |
| |
| /* |
| * Macros mapping the MPIDR Affinity levels to ARM Platform Power levels. |
| * The power levels have a 1:1 mapping with the MPIDR affinity levels. |
| */ |
| /* In NPCM845x - refers to cores */ |
| #define ARM_PWR_LVL0 MPIDR_AFFLVL0 |
| |
| /* In NPCM845x - refers to cluster */ |
| #define ARM_PWR_LVL1 MPIDR_AFFLVL1 |
| |
| /* No need for additional settings because the platform doesn't have system */ |
| |
| /* |
| * Macros for local power states in ARM platforms encoded by State-ID field |
| * within the power-state parameter. |
| */ |
| #define NPCM845x_PLAT_PRIMARY_CPU U(0x0) |
| #define NPCM845x_CLUSTER_COUNT U(1) |
| |
| #ifdef SECONDARY_BRINGUP |
| #define NPCM845x_MAX_CPU_PER_CLUSTER U(2) |
| #define NPCM845x_PLATFORM_CORE_COUNT U(2) |
| #define NPCM845x_PLATFORM_CLUSTER0_CORE_COUNT U(2) |
| #else |
| #define NPCM845x_MAX_CPU_PER_CLUSTER U(4) |
| #define NPCM845x_PLATFORM_CORE_COUNT U(4) |
| #define NPCM845x_PLATFORM_CLUSTER0_CORE_COUNT U(4) |
| #endif /* SECONDARY_BRINGUP */ |
| |
| #define NPCM845x_SYSTEM_COUNT U(0) |
| |
| /* Memory mapping for NPCM845x */ |
| #define NPCM845x_REG_BASE 0xf0000000 |
| #define NPCM845x_REG_SIZE 0x0ff16000 |
| |
| /* |
| * DRAM |
| * 0x3fffffff +-------------+ |
| * | BL33 | (non-secure) |
| * 0x06200000 +-------------+ |
| * | BL32 SHARED | (non-secure) |
| * 0x06000000 +-------------+ |
| * | BL32 | (secure) |
| * 0x02100000 +-------------+ |
| * | BL31 | (secure) |
| * 0x02000000 +-------------+ |
| * | | (non-secure) |
| * 0x00000000 +-------------+ |
| * |
| * Trusted ROM |
| * 0xfff50000 +-------------+ |
| * | BL1 (ro) | |
| * 0xfff40000 +-------------+ |
| */ |
| |
| #define ARM_DRAM1_BASE ULL(0x00000000) |
| #ifndef CONFIG_TARGET_ARBEL_PALLADIUM |
| /* |
| * Although npcm845x is 4G, |
| * consider only 2G Trusted Firmware memory allocation |
| */ |
| #define ARM_DRAM1_SIZE ULL(0x37000000) |
| #else |
| #define ARM_DRAM1_SIZE ULL(0x10000000) |
| #define ARM_DRAM1_END (ARM_DRAM1_BASE + ARM_DRAM1_SIZE - 1U) |
| #endif /* CONFIG_TARGET_ARBEL_PALLADIUM */ |
| |
| /* |
| * The top 16MB of DRAM1 is configured as secure access only using the TZC |
| * - SCP TZC DRAM: If present, DRAM reserved for SCP use |
| * - AP TZC DRAM: The remaining TZC secured DRAM reserved for AP use |
| */ |
| |
| /* Check for redundancy */ |
| #ifdef NPCM845X_DEBUG |
| #define PLAT_ARM_NS_IMAGE_BASE 0x0 |
| #endif /* NPCM845X_DEBUG */ |
| |
| #define ARM_TZC_DRAM1_SIZE UL(0x01000000) |
| #define ARM_SCP_TZC_DRAM1_SIZE PLAT_ARM_SCP_TZC_DRAM1_SIZE |
| #define ARM_SCP_TZC_DRAM1_END (ARM_SCP_TZC_DRAM1_BASE + \ |
| ARM_SCP_TZC_DRAM1_SIZE - 1U) |
| |
| /* |
| * Define a 2MB region within the TZC secured DRAM for use by EL3 runtime |
| * firmware. This region is meant to be NOLOAD and will not be zero |
| * initialized. Data sections with the attribute `arm_el3_tzc_dram` |
| * will be placed here. |
| * |
| * NPCM845x - Currently the platform doesn't have EL3 implementation |
| * on secured DRAM. |
| */ |
| #define ARM_EL3_TZC_DRAM1_BASE (ARM_SCP_TZC_DRAM1_BASE - \ |
| ARM_EL3_TZC_DRAM1_SIZE) |
| #define ARM_EL3_TZC_DRAM1_SIZE UL(0x00200000) /* 2 MB */ |
| #define ARM_EL3_TZC_DRAM1_END (ARM_EL3_TZC_DRAM1_BASE + \ |
| ARM_EL3_TZC_DRAM1_SIZE - 1U) |
| |
| #define ARM_AP_TZC_DRAM1_BASE 0x02100000 |
| #define ARM_AP_TZC_DRAM1_SIZE (ARM_TZC_DRAM1_SIZE - \ |
| (ARM_SCP_TZC_DRAM1_SIZE + \ |
| ARM_EL3_TZC_DRAM1_SIZE)) |
| #define ARM_AP_TZC_DRAM1_END (ARM_AP_TZC_DRAM1_BASE + \ |
| ARM_AP_TZC_DRAM1_SIZE - 1U) |
| |
| /* Define the Access permissions for Secure peripherals to NS_DRAM */ |
| #if ARM_CRYPTOCELL_INTEG |
| /* |
| * Allow Secure peripheral to read NS DRAM when integrated with CryptoCell. |
| * This is required by CryptoCell to authenticate BL33 which is loaded |
| * into the Non Secure DDR. |
| */ |
| #define ARM_TZC_NS_DRAM_S_ACCESS TZC_REGION_S_RD |
| #else |
| #define ARM_TZC_NS_DRAM_S_ACCESS TZC_REGION_S_NONE |
| #endif /* ARM_CRYPTOCELL_INTEG */ |
| |
| #ifdef SPD_opteed |
| /* |
| * BL2 needs to map 4MB at the end of TZC_DRAM1 in order to |
| * load/authenticate the trusted os extra image. The first 512KB of |
| * TZC_DRAM1 are reserved for trusted os (OPTEE). The extra image loading |
| * for OPTEE is paged image which only include the paging part using |
| * virtual memory but without "init" data. OPTEE will copy the "init" data |
| * (from pager image) to the first 512KB of TZC_DRAM, and then copy the |
| * extra image behind the "init" data. |
| */ |
| #define TSP_SEC_MEM_BASE ARM_AP_TZC_DRAM1_BASE |
| #define TSP_SEC_MEM_SIZE ARM_AP_TZC_DRAM1_SIZE |
| #define BL32_BASE ARM_AP_TZC_DRAM1_BASE |
| #define BL32_LIMIT (ARM_AP_TZC_DRAM1_BASE + \ |
| ARM_AP_TZC_DRAM1_SIZE) |
| |
| #define ARM_OPTEE_PAGEABLE_LOAD_BASE ( \ |
| ARM_AP_TZC_DRAM1_BASE + ARM_AP_TZC_DRAM1_SIZE - \ |
| ARM_OPTEE_PAGEABLE_LOAD_SIZE) |
| #define ARM_OPTEE_PAGEABLE_LOAD_SIZE UL(0x400000) |
| #define ARM_OPTEE_PAGEABLE_LOAD_MEM MAP_REGION_FLAT( \ |
| ARM_OPTEE_PAGEABLE_LOAD_BASE, \ |
| ARM_OPTEE_PAGEABLE_LOAD_SIZE, \ |
| MT_MEMORY | MT_RW | MT_SECURE) |
| |
| /* |
| * Map the memory for the OP-TEE core (also known as OP-TEE pager |
| * when paging support is enabled). |
| */ |
| #define ARM_MAP_OPTEE_CORE_MEM MAP_REGION_FLAT( \ |
| BL32_BASE, BL32_LIMIT - BL32_BASE, \ |
| MT_MEMORY | MT_RW | MT_SECURE) |
| #endif /* SPD_opteed */ |
| |
| #define ARM_NS_DRAM1_BASE ARM_DRAM1_BASE |
| #define ARM_NS_DRAM1_SIZE (ARM_DRAM1_SIZE - \ |
| ARM_TZC_DRAM1_SIZE) |
| #define ARM_NS_DRAM1_END (ARM_NS_DRAM1_BASE + \ |
| ARM_NS_DRAM1_SIZE - 1U) |
| |
| /* The platform doesn't use DRAM2 but it has to have a value for calculation */ |
| #define ARM_DRAM2_BASE 0 /* PLAT_ARM_DRAM_BASE */ |
| #define ARM_DRAM2_SIZE 1 /* PLAT_ARM_DRAM_SIZE */ |
| #define ARM_DRAM2_END (ARM_DRAM2_BASE + ARM_DRAM2_SIZE - 1U) |
| |
| #define FIRST_EXT_INTERRUPT_NUM U(32) |
| #define ARM_IRQ_SEC_PHY_TIMER (U(29) + FIRST_EXT_INTERRUPT_NUM) |
| |
| #define ARM_IRQ_SEC_SGI_0 8 |
| #define ARM_IRQ_SEC_SGI_1 9 |
| #define ARM_IRQ_SEC_SGI_2 10 |
| #define ARM_IRQ_SEC_SGI_3 11 |
| #define ARM_IRQ_SEC_SGI_4 12 |
| #define ARM_IRQ_SEC_SGI_5 13 |
| #define ARM_IRQ_SEC_SGI_6 14 |
| #define ARM_IRQ_SEC_SGI_7 15 |
| |
| /* |
| * Define a list of Group 1 Secure and Group 0 interrupt properties |
| * as per GICv3 terminology. On a GICv2 system or mode, |
| * the lists will be merged and treated as Group 0 interrupts. |
| */ |
| #define ARM_G1S_IRQ_PROPS(grp) \ |
| INTR_PROP_DESC(ARM_IRQ_SEC_PHY_TIMER, \ |
| GIC_HIGHEST_SEC_PRIORITY, (grp), GIC_INTR_CFG_LEVEL), \ |
| INTR_PROP_DESC(ARM_IRQ_SEC_SGI_1, \ |
| GIC_HIGHEST_SEC_PRIORITY, (grp), GIC_INTR_CFG_EDGE), \ |
| INTR_PROP_DESC(ARM_IRQ_SEC_SGI_2, \ |
| GIC_HIGHEST_SEC_PRIORITY, (grp), GIC_INTR_CFG_EDGE), \ |
| INTR_PROP_DESC(ARM_IRQ_SEC_SGI_3, \ |
| GIC_HIGHEST_SEC_PRIORITY, (grp), GIC_INTR_CFG_EDGE), \ |
| INTR_PROP_DESC(ARM_IRQ_SEC_SGI_4, \ |
| GIC_HIGHEST_SEC_PRIORITY, (grp), GIC_INTR_CFG_EDGE), \ |
| INTR_PROP_DESC(ARM_IRQ_SEC_SGI_5, \ |
| GIC_HIGHEST_SEC_PRIORITY, (grp), GIC_INTR_CFG_EDGE), \ |
| INTR_PROP_DESC(ARM_IRQ_SEC_SGI_7, \ |
| GIC_HIGHEST_SEC_PRIORITY, (grp), GIC_INTR_CFG_EDGE) |
| |
| #define ARM_G0_IRQ_PROPS(grp) \ |
| INTR_PROP_DESC(ARM_IRQ_SEC_SGI_0, \ |
| PLAT_SDEI_NORMAL_PRI, (grp), GIC_INTR_CFG_EDGE), \ |
| INTR_PROP_DESC(ARM_IRQ_SEC_SGI_6, \ |
| GIC_HIGHEST_SEC_PRIORITY, (grp), GIC_INTR_CFG_EDGE) |
| |
| #define ARM_MAP_SHARED_RAM MAP_REGION_FLAT( \ |
| ARM_SHARED_RAM_BASE, ARM_SHARED_RAM_SIZE, \ |
| MT_DEVICE | MT_RW | MT_SECURE) |
| |
| #ifdef ALLOW_DEBUG_MMU |
| /* In order to be able to debug, |
| * the platform needs to add BL33 and BL32 to MMU as well. |
| */ |
| #define ARM_MAP_NS_DRAM1 MAP_REGION_FLAT( \ |
| ARM_NS_DRAM1_BASE, ARM_NS_DRAM1_SIZE, \ |
| MT_MEMORY | MT_RW | MT_NS) |
| |
| #ifdef BL32_BASE |
| #define ARM_MAP_BL32_CORE_MEM MAP_REGION_FLAT( \ |
| BL32_BASE, BL32_LIMIT - BL32_BASE, \ |
| MT_MEMORY | MT_RW | MT_SECURE) |
| #endif /* BL32_BASE */ |
| |
| #ifdef NPCM845X_DEBUG |
| #define ARM_MAP_SEC_BB_MEM MAP_REGION_FLAT( \ |
| 0xFFFB0000, 0x20000, \ |
| MT_MEMORY | MT_RW | MT_NS) |
| #endif /* NPCM845X_DEBUG */ |
| #endif /* BL32_BASE */ |
| |
| #define ARM_MAP_DRAM2 MAP_REGION_FLAT( \ |
| ARM_DRAM2_BASE, ARM_DRAM2_SIZE, \ |
| MT_MEMORY | MT_RW | MT_NS) |
| |
| #define ARM_MAP_TSP_SEC_MEM MAP_REGION_FLAT( \ |
| TSP_SEC_MEM_BASE, TSP_SEC_MEM_SIZE, \ |
| MT_MEMORY | MT_RW | MT_SECURE) |
| |
| #if ARM_BL31_IN_DRAM |
| #define ARM_MAP_BL31_SEC_DRAM MAP_REGION_FLAT( \ |
| BL31_BASE, PLAT_ARM_MAX_BL31_SIZE, \ |
| MT_MEMORY | MT_RW | MT_SECURE) |
| #endif /* ARM_BL31_IN_DRAM */ |
| |
| /* Currently the platform doesn't have EL3 implementation on secured DRAM. */ |
| #define ARM_MAP_EL3_TZC_DRAM MAP_REGION_FLAT( \ |
| ARM_EL3_TZC_DRAM1_BASE, \ |
| ARM_EL3_TZC_DRAM1_SIZE, \ |
| MT_MEMORY | MT_RW | MT_SECURE) |
| |
| #if defined(SPD_spmd) |
| #define ARM_MAP_TRUSTED_DRAM MAP_REGION_FLAT( \ |
| PLAT_ARM_TRUSTED_DRAM_BASE, \ |
| PLAT_ARM_TRUSTED_DRAM_SIZE, \ |
| MT_MEMORY | MT_RW | MT_SECURE) |
| #endif /* SPD_spmd */ |
| |
| /* |
| * Mapping for the BL1 RW region. This mapping is needed by BL2 |
| * in order to share the Mbed TLS heap. Since the heap is allocated |
| * inside BL1, it resides in the BL1 RW region. Hence, BL2 needs access |
| * to the BL1 RW region in order to be able to access the heap. |
| */ |
| #define ARM_MAP_BL1_RW MAP_REGION_FLAT( \ |
| BL1_RW_BASE, BL1_RW_LIMIT - BL1_RW_BASE, \ |
| MT_MEMORY | MT_RW | EL3_PAS) |
| |
| /* |
| * If SEPARATE_CODE_AND_RODATA=1 the platform will define a region |
| * for each section, otherwise one region containing both sections |
| * is defined. |
| */ |
| #if SEPARATE_CODE_AND_RODATA |
| #define ARM_MAP_BL_RO MAP_REGION_FLAT( \ |
| BL_CODE_BASE, BL_CODE_END - BL_CODE_BASE, \ |
| MT_CODE | EL3_PAS), \ |
| MAP_REGION_FLAT(BL_RO_DATA_BASE, \ |
| BL_RO_DATA_END - BL_RO_DATA_BASE, \ |
| MT_RO_DATA | EL3_PAS) |
| #else |
| #define ARM_MAP_BL_RO_NOT_USED MAP_REGION_FLAT( \ |
| BL_CODE_BASE, BL_CODE_END - BL_CODE_BASE, \ |
| MT_CODE | EL3_PAS) |
| #endif /* SEPARATE_CODE_AND_RODATA */ |
| |
| #if USE_COHERENT_MEM |
| #define ARM_MAP_BL_COHERENT_RAM MAP_REGION_FLAT( \ |
| BL_COHERENT_RAM_BASE, \ |
| BL_COHERENT_RAM_END - BL_COHERENT_RAM_BASE, \ |
| MT_DEVICE | MT_RW | EL3_PAS) |
| #endif /* USE_COHERENT_MEM */ |
| |
| #if USE_ROMLIB |
| #define ARM_MAP_ROMLIB_CODE MAP_REGION_FLAT( \ |
| ROMLIB_RO_BASE, \ |
| ROMLIB_RO_LIMIT - ROMLIB_RO_BASE, \ |
| MT_CODE | MT_SECURE) |
| |
| #define ARM_MAP_ROMLIB_DATA MAP_REGION_FLAT( \ |
| ROMLIB_RW_BASE, \ |
| ROMLIB_RW_END - ROMLIB_RW_BASE, \ |
| MT_MEMORY | MT_RW | MT_SECURE) |
| #endif /* USE_ROMLIB */ |
| |
| /* |
| * Map mem_protect flash region with read and write permissions |
| */ |
| #define ARM_V2M_MAP_MEM_PROTECT MAP_REGION_FLAT( \ |
| PLAT_ARM_MEM_PROT_ADDR, \ |
| V2M_FLASH_BLOCK_SIZE, \ |
| MT_DEVICE | MT_RW | MT_SECURE) |
| /* |
| * Map the region for device tree configuration with read and write permissions |
| */ |
| #define ARM_MAP_BL_CONFIG_REGION MAP_REGION_FLAT( \ |
| ARM_BL_RAM_BASE, \ |
| (ARM_FW_CONFIGS_LIMIT - ARM_BL_RAM_BASE), \ |
| MT_MEMORY | MT_RW | MT_SECURE) |
| |
| /* |
| * The max number of regions like RO(code), coherent and data required by |
| * different BL stages which need to be mapped in the MMU. |
| */ |
| #define ARM_BL_REGIONS 10 |
| |
| #define MAX_MMAP_REGIONS ( \ |
| PLAT_ARM_MMAP_ENTRIES + ARM_BL_REGIONS) |
| |
| /* Memory mapped Generic timer interfaces */ |
| #define ARM_SYS_CNTCTL_BASE UL(0XF07FC000) |
| |
| #define ARM_CONSOLE_BAUDRATE 115200 |
| |
| /* |
| * The TBBR document specifies a watchdog timeout of 256 seconds. SP805 |
| * asserts reset after two consecutive countdowns (2 x 128 = 256 sec) |
| */ |
| #define ARM_TWDG_TIMEOUT_SEC 128 |
| #define ARM_TWDG_LOAD_VAL (ARM_SP805_TWDG_CLK_HZ * \ |
| ARM_TWDG_TIMEOUT_SEC) |
| |
| /****************************************************************************** |
| * Required platform porting definitions common to all ARM standard platforms |
| *****************************************************************************/ |
| |
| /* |
| * Some data must be aligned on the biggest cache line size in the platform. |
| * This is known only to the platform as it might have a combination of |
| * integrated and external caches (64 on Arbel). |
| */ |
| #define CACHE_WRITEBACK_GRANULE (U(1) << ARM_CACHE_WRITEBACK_SHIFT) |
| |
| /* |
| * To enable FW_CONFIG to be loaded by BL1, define the corresponding base |
| * and limit. Leave enough space of BL2 meminfo. |
| */ |
| #define ARM_FW_CONFIG_BASE (ARM_BL_RAM_BASE + sizeof(meminfo_t)) |
| #define ARM_FW_CONFIG_LIMIT ( \ |
| (ARM_BL_RAM_BASE + PAGE_SIZE) + (PAGE_SIZE / 2U)) |
| |
| /* |
| * Boot parameters passed from BL2 to BL31/BL32 are stored here |
| */ |
| #define ARM_BL2_MEM_DESC_BASE (ARM_FW_CONFIG_LIMIT) |
| #define ARM_BL2_MEM_DESC_LIMIT ( \ |
| ARM_BL2_MEM_DESC_BASE + (PAGE_SIZE / 2U)) |
| |
| /* |
| * Define limit of firmware configuration memory: |
| * ARM_FW_CONFIG + ARM_BL2_MEM_DESC memory |
| */ |
| #define ARM_FW_CONFIGS_LIMIT (ARM_BL_RAM_BASE + (PAGE_SIZE * 2)) |
| |
| /******************************************************************************* |
| * BL1 specific defines. |
| * BL1 RW data is relocated from ROM to RAM at runtime so we need |
| * two sets of addresses. |
| ******************************************************************************/ |
| #define BL1_RO_BASE PLAT_ARM_TRUSTED_ROM_BASE |
| #define BL1_RO_LIMIT (PLAT_ARM_TRUSTED_ROM_BASE + \ |
| (PLAT_ARM_TRUSTED_ROM_SIZE - PLAT_ARM_MAX_ROMLIB_RO_SIZE)) |
| /* |
| * Put BL1 RW at the top of the Trusted SRAM. |
| */ |
| #define BL1_RW_BASE (ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE - \ |
| (PLAT_ARM_MAX_BL1_RW_SIZE + PLAT_ARM_MAX_ROMLIB_RW_SIZE)) |
| #define BL1_RW_LIMIT (ARM_BL_RAM_BASE + \ |
| (ARM_BL_RAM_SIZE - PLAT_ARM_MAX_ROMLIB_RW_SIZE)) |
| |
| #define ROMLIB_RO_BASE BL1_RO_LIMIT |
| #define ROMLIB_RO_LIMIT ( \ |
| PLAT_ARM_TRUSTED_ROM_BASE + PLAT_ARM_TRUSTED_ROM_SIZE) |
| |
| #define ROMLIB_RW_BASE (BL1_RW_BASE + PLAT_ARM_MAX_BL1_RW_SIZE) |
| #define ROMLIB_RW_END ( \ |
| ROMLIB_RW_BASE + PLAT_ARM_MAX_ROMLIB_RW_SIZE) |
| |
| /****************************************************************************** |
| * BL2 specific defines. |
| *****************************************************************************/ |
| #if BL2_AT_EL3 |
| /* Put BL2 towards the middle of the Trusted SRAM */ |
| #define BL2_BASE (ARM_TRUSTED_SRAM_BASE + \ |
| PLAT_ARM_TRUSTED_SRAM_SIZE >> 1) + 0x2000) |
| #define BL2_LIMIT (ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE) |
| #else |
| /* |
| * Put BL2 just below BL1. |
| */ |
| #define BL2_BASE (BL1_RW_BASE - PLAT_ARM_MAX_BL2_SIZE) |
| #define BL2_LIMIT BL1_RW_BASE |
| #endif /* BL2_AT_EL3 */ |
| |
| /******************************************************************************* |
| * BL31 specific defines. |
| ******************************************************************************/ |
| #if ARM_BL31_IN_DRAM || SEPARATE_NOBITS_REGION |
| /* |
| * Put BL31 at the bottom of TZC secured DRAM |
| */ |
| #define BL31_BASE ARM_AP_TZC_DRAM1_BASE |
| #define BL31_LIMIT ( \ |
| ARM_AP_TZC_DRAM1_BASE + PLAT_ARM_MAX_BL31_SIZE) |
| |
| /* |
| * For SEPARATE_NOBITS_REGION, BL31 PROGBITS are loaded in TZC secured DRAM. |
| * And BL31 NOBITS are loaded in Trusted SRAM such that BL2 is overwritten. |
| */ |
| #if SEPARATE_NOBITS_REGION |
| #define BL31_NOBITS_BASE BL2_BASE |
| #define BL31_NOBITS_LIMIT BL2_LIMIT |
| #endif /* SEPARATE_NOBITS_REGION */ |
| #elif (RESET_TO_BL31) |
| /* Ensure Position Independent support (PIE) is enabled for this config.*/ |
| #if !ENABLE_PIE |
| #error "BL31 must be a PIE if RESET_TO_BL31=1." |
| #endif /* !ENABLE_PIE */ |
| /* |
| * Since this is PIE, we can define BL31_BASE to 0x0 since this macro is solely |
| * used for building BL31 and not used for loading BL31. |
| */ |
| #define NEW_SRAM_ALLOCATION |
| |
| #ifdef NEW_SRAM_ALLOCATION |
| #define BL31_BASE 0x02000000 |
| #else |
| #define BL31_BASE 0x02001000 |
| #endif /* NEW_SRAM_ALLOCATION */ |
| |
| #define BL31_LIMIT BL2_BASE /* PLAT_ARM_MAX_BL31_SIZE */ |
| #else |
| /* Put BL31 below BL2 in the Trusted SRAM.*/ |
| #define BL31_BASE ((ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE) - \ |
| PLAT_ARM_MAX_BL31_SIZE) |
| #define BL31_PROGBITS_LIMIT BL2_BASE |
| |
| /* |
| * For BL2_AT_EL3 make sure the BL31 can grow up until BL2_BASE. |
| * This is because in the BL2_AT_EL3 configuration, BL2 is always resident. |
| */ |
| #if BL2_AT_EL3 |
| #define BL31_LIMIT BL2_BASE |
| #else |
| #define BL31_LIMIT (ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE) |
| #endif /* BL2_AT_EL3 */ |
| #endif /* ARM_BL31_IN_DRAM || SEPARATE_NOBITS_REGION */ |
| |
| /* |
| * BL32 is mandatory in AArch32. In AArch64, undefine BL32_BASE if there is |
| * no SPD and no SPM-MM, as they are the only ones that can be used as BL32. |
| */ |
| #if defined(SPD_none) && !SPM_MM |
| #error BL32_BASE is not defined |
| #undef BL32_BASE |
| #endif /* SPD_none && !SPM_MM */ |
| |
| /****************************************************************************** |
| * FWU Images: NS_BL1U, BL2U & NS_BL2U defines. |
| *****************************************************************************/ |
| #define BL2U_BASE BL2_BASE |
| #define BL2U_LIMIT BL2_LIMIT |
| |
| #define NS_BL2U_BASE ARM_NS_DRAM1_BASE |
| #define NS_BL1U_BASE (PLAT_ARM_NVM_BASE + UL(0x03EB8000)) |
| |
| /* |
| * ID of the secure physical generic timer interrupt used by the TSP. |
| */ |
| #define TSP_IRQ_SEC_PHY_TIMER ARM_IRQ_SEC_PHY_TIMER |
| |
| /* |
| * One cache line needed for bakery locks on ARM platforms |
| */ |
| #define PLAT_PERCPU_BAKERY_LOCK_SIZE (1 * CACHE_WRITEBACK_GRANULE) |
| |
| /* Priority levels for ARM platforms */ |
| #define PLAT_RAS_PRI 0x10 |
| #define PLAT_SDEI_CRITICAL_PRI 0x60 |
| #define PLAT_SDEI_NORMAL_PRI 0x70 |
| |
| /* ARM platforms use 3 upper bits of secure interrupt priority */ |
| #define ARM_PRI_BITS 3 |
| |
| /* SGI used for SDEI signalling */ |
| #define ARM_SDEI_SGI ARM_IRQ_SEC_SGI_0 |
| |
| #if SDEI_IN_FCONF |
| /* ARM SDEI dynamic private event max count */ |
| #define ARM_SDEI_DP_EVENT_MAX_CNT 3 |
| |
| /* ARM SDEI dynamic shared event max count */ |
| #define ARM_SDEI_DS_EVENT_MAX_CNT 3 |
| #else |
| /* ARM SDEI dynamic private event numbers */ |
| #define ARM_SDEI_DP_EVENT_0 1000 |
| #define ARM_SDEI_DP_EVENT_1 1001 |
| #define ARM_SDEI_DP_EVENT_2 1002 |
| |
| /* ARM SDEI dynamic shared event numbers */ |
| #define ARM_SDEI_DS_EVENT_0 2000 |
| #define ARM_SDEI_DS_EVENT_1 2001 |
| #define ARM_SDEI_DS_EVENT_2 2002 |
| |
| #define ARM_SDEI_PRIVATE_EVENTS \ |
| SDEI_DEFINE_EVENT_0(ARM_SDEI_SGI), \ |
| SDEI_PRIVATE_EVENT(ARM_SDEI_DP_EVENT_0, SDEI_DYN_IRQ, SDEI_MAPF_DYNAMIC), \ |
| SDEI_PRIVATE_EVENT(ARM_SDEI_DP_EVENT_1, SDEI_DYN_IRQ, SDEI_MAPF_DYNAMIC), \ |
| SDEI_PRIVATE_EVENT(ARM_SDEI_DP_EVENT_2, SDEI_DYN_IRQ, SDEI_MAPF_DYNAMIC) |
| |
| #define ARM_SDEI_SHARED_EVENTS \ |
| SDEI_SHARED_EVENT(ARM_SDEI_DS_EVENT_0, SDEI_DYN_IRQ, SDEI_MAPF_DYNAMIC), \ |
| SDEI_SHARED_EVENT(ARM_SDEI_DS_EVENT_1, SDEI_DYN_IRQ, SDEI_MAPF_DYNAMIC), \ |
| SDEI_SHARED_EVENT(ARM_SDEI_DS_EVENT_2, SDEI_DYN_IRQ, SDEI_MAPF_DYNAMIC) |
| #endif /* SDEI_IN_FCONF */ |
| |
| #endif /* ARM_DEF_H */ |