blob: c2a8bd055908bd5447b7623029a274bc1bf57e5f [file] [log] [blame]
/*
* Copyright (C) 2018 Marvell International Ltd.
*
* SPDX-License-Identifier: BSD-3-Clause
* https://spdx.org/licenses
*/
#ifndef MARVELL_MACROS_S
#define MARVELL_MACROS_S
#include <cci.h>
#include <gic_common.h>
#include <gicv2.h>
#include <gicv3.h>
#include <platform_def.h>
/*
* These Macros are required by ATF
*/
.section .rodata.gic_reg_name, "aS"
/* Applicable only to GICv2 and GICv3 with SRE disabled (legacy mode) */
gicc_regs:
.asciz "gicc_hppir", "gicc_ahppir", "gicc_ctlr", ""
#ifdef USE_CCI
/* Applicable only to GICv3 with SRE enabled */
icc_regs:
.asciz "icc_hppir0_el1", "icc_hppir1_el1", "icc_ctlr_el3", ""
#endif
/* Registers common to both GICv2 and GICv3 */
gicd_pend_reg:
.asciz "gicd_ispendr regs (Offsets 0x200 - 0x278)\n" \
" Offset:\t\t\tvalue\n"
newline:
.asciz "\n"
spacer:
.asciz ":\t\t0x"
/* ---------------------------------------------
* The below utility macro prints out relevant GIC
* registers whenever an unhandled exception is
* taken in BL31 on ARM standard platforms.
* Expects: GICD base in x16, GICC base in x17
* Clobbers: x0 - x10, sp
* ---------------------------------------------
*/
.macro marvell_print_gic_regs
/* Check for GICv3 system register access */
mrs x7, id_aa64pfr0_el1
ubfx x7, x7, #ID_AA64PFR0_GIC_SHIFT, #ID_AA64PFR0_GIC_WIDTH
cmp x7, #1
b.ne print_gicv2
/* Check for SRE enable */
mrs x8, ICC_SRE_EL3
tst x8, #ICC_SRE_SRE_BIT
b.eq print_gicv2
#ifdef USE_CCI
/* Load the icc reg list to x6 */
adr x6, icc_regs
/* Load the icc regs to gp regs used by str_in_crash_buf_print */
mrs x8, ICC_HPPIR0_EL1
mrs x9, ICC_HPPIR1_EL1
mrs x10, ICC_CTLR_EL3
/* Store to the crash buf and print to console */
bl str_in_crash_buf_print
#endif
b print_gic_common
print_gicv2:
/* Load the gicc reg list to x6 */
adr x6, gicc_regs
/* Load the gicc regs to gp regs used by str_in_crash_buf_print */
ldr w8, [x17, #GICC_HPPIR]
ldr w9, [x17, #GICC_AHPPIR]
ldr w10, [x17, #GICC_CTLR]
/* Store to the crash buf and print to console */
bl str_in_crash_buf_print
print_gic_common:
/* Print the GICD_ISPENDR regs */
add x7, x16, #GICD_ISPENDR
adr x4, gicd_pend_reg
bl asm_print_str
gicd_ispendr_loop:
sub x4, x7, x16
cmp x4, #0x280
b.eq exit_print_gic_regs
bl asm_print_hex
adr x4, spacer
bl asm_print_str
ldr x4, [x7], #8
bl asm_print_hex
adr x4, newline
bl asm_print_str
b gicd_ispendr_loop
exit_print_gic_regs:
.endm
.section .rodata.cci_reg_name, "aS"
cci_iface_regs:
.asciz "cci_snoop_ctrl_cluster0", "cci_snoop_ctrl_cluster1" , ""
/* ------------------------------------------------
* The below required platform porting macro prints
* out relevant interconnect registers whenever an
* unhandled exception is taken in BL31.
* Clobbers: x0 - x9, sp
* ------------------------------------------------
*/
.macro print_cci_regs
#ifdef USE_CCI
adr x6, cci_iface_regs
/* Store in x7 the base address of the first interface */
mov_imm x7, (PLAT_MARVELL_CCI_BASE + SLAVE_IFACE_OFFSET( \
PLAT_MARVELL_CCI_CLUSTER0_SL_IFACE_IX))
ldr w8, [x7, #SNOOP_CTRL_REG]
/* Store in x7 the base address of the second interface */
mov_imm x7, (PLAT_MARVELL_CCI_BASE + SLAVE_IFACE_OFFSET( \
PLAT_MARVELL_CCI_CLUSTER1_SL_IFACE_IX))
ldr w9, [x7, #SNOOP_CTRL_REG]
/* Store to the crash buf and print to console */
bl str_in_crash_buf_print
#endif
.endm
#endif /* MARVELL_MACROS_S */