blob: d46e02089168ecda6c3231d9a3234566f0d870b3 [file] [log] [blame]
/*
* Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <arch.h>
#include <assert.h>
#include <bakery_lock.h>
#include <ccn.h>
#include <debug.h>
#include <errno.h>
#include <mmio.h>
#include <stdbool.h>
#include "ccn_private.h"
static const ccn_desc_t *ccn_plat_desc;
#if defined(IMAGE_BL31) || (defined(AARCH32) && defined(IMAGE_BL32))
DEFINE_BAKERY_LOCK(ccn_lock);
#endif
/*******************************************************************************
* This function takes the base address of the CCN's programmer's view (PV), a
* region ID of one of the 256 regions (0-255) and a register offset within the
* region. It converts the first two parameters into a base address and uses it
* to read the register at the offset.
******************************************************************************/
static inline unsigned long long ccn_reg_read(uintptr_t periphbase,
unsigned int region_id,
unsigned int register_offset)
{
uintptr_t region_base;
assert(periphbase);
assert(region_id < REGION_ID_LIMIT);
region_base = periphbase + region_id_to_base(region_id);
return mmio_read_64(region_base + register_offset);
}
/*******************************************************************************
* This function takes the base address of the CCN's programmer's view (PV), a
* region ID of one of the 256 regions (0-255), a register offset within the
* region and a value. It converts the first two parameters into a base address
* and uses it to write the value in the register at the offset.
******************************************************************************/
static inline void ccn_reg_write(uintptr_t periphbase,
unsigned int region_id,
unsigned int register_offset,
unsigned long long value)
{
uintptr_t region_base;
assert(periphbase);
assert(region_id < REGION_ID_LIMIT);
region_base = periphbase + region_id_to_base(region_id);
mmio_write_64(region_base + register_offset, value);
}
#if ENABLE_ASSERTIONS
typedef struct rn_info {
unsigned char node_desc[MAX_RN_NODES];
} rn_info_t;
/*******************************************************************************
* This function takes the base address of the CCN's programmer's view (PV) and
* the node ID of a Request Node (RN-D or RN-I). It returns the maximum number
* of master interfaces resident on that node. This number is equal to the least
* significant two bits of the node type ID + 1.
******************************************************************************/
static unsigned int ccn_get_rni_mcount(uintptr_t periphbase,
unsigned int rn_id)
{
unsigned int rn_type_id;
/* Use the node id to find the type of RN-I/D node */
rn_type_id = get_node_type(ccn_reg_read(periphbase,
rn_id + RNI_REGION_ID_START,
REGION_ID_OFFSET));
/* Return the number master interfaces based on node type */
return rn_type_id_to_master_cnt(rn_type_id);
}
/*******************************************************************************
* This function reads the CCN registers to find the following information about
* the ACE/ACELite/ACELite+DVM/CHI interfaces resident on the various types of
* Request Nodes (RN-Fs, RN-Is and RN-Ds) in the system:
*
* 1. The total number of such interfaces that this CCN IP supports. This is the
* cumulative number of interfaces across all Request node types. It is
* passed back as the return value of this function.
*
* 2. The maximum number of interfaces of a type resident on a Request node of
* one of the three types. This information is populated in the 'info'
* array provided by the caller as described next.
*
* The array has 64 entries. Each entry corresponds to a Request node. The
* Miscellaneous node's programmer's view has RN-F, RN-I and RN-D ID
* registers. For each RN-I and RN-D ID indicated as being present in these
* registers, its identification register (offset 0xFF00) is read. This
* register specifies the maximum number of master interfaces the node
* supports. For RN-Fs it is assumed that there can be only a single fully
* coherent master resident on each node. The counts for each type of node
* are use to populate the array entry at the index corresponding to the node
* ID i.e. rn_info[node ID] = <number of master interfaces>
******************************************************************************/
static unsigned int ccn_get_rn_master_info(uintptr_t periphbase,
rn_info_t *info)
{
unsigned int num_masters = 0;
rn_types_t rn_type;
assert (info);
for (rn_type = RN_TYPE_RNF; rn_type < NUM_RN_TYPES; rn_type++) {
unsigned int mn_reg_off, node_id;
unsigned long long rn_bitmap;
/*
* RN-F, RN-I, RN-D node registers in the MN region occupy
* contiguous 16 byte apart offsets.
*/
mn_reg_off = MN_RNF_NODEID_OFFSET + (rn_type << 4);
rn_bitmap = ccn_reg_read(periphbase, MN_REGION_ID, mn_reg_off);
FOR_EACH_PRESENT_NODE_ID(node_id, rn_bitmap) {
unsigned int node_mcount;
/*
* A RN-F does not have a node type since it does not
* export a programmer's interface. It can only have a
* single fully coherent master residing on it. If the
* offset of the MN(Miscellaneous Node) register points
* to a RN-I/D node then the master count is set to the
* maximum number of master interfaces that can possibly
* reside on the node.
*/
node_mcount = (mn_reg_off == MN_RNF_NODEID_OFFSET ? 1 :
ccn_get_rni_mcount(periphbase, node_id));
/*
* Use this value to increment the maximum possible
* master interfaces in the system.
*/
num_masters += node_mcount;
/*
* Update the entry in 'info' for this node ID with
* the maximum number of masters than can sit on
* it. This information will be used to validate the
* node information passed by the platform later.
*/
info->node_desc[node_id] = node_mcount;
}
}
return num_masters;
}
/*******************************************************************************
* This function validates parameters passed by the platform (in a debug build).
* It collects information about the maximum number of master interfaces that:
* a) the CCN IP can accommodate and
* b) can exist on each Request node.
* It compares this with the information provided by the platform to determine
* the validity of the latter.
******************************************************************************/
static void __init ccn_validate_plat_params(const ccn_desc_t *plat_desc)
{
unsigned int master_id, num_rn_masters;
rn_info_t info = { {0} };
assert(plat_desc);
assert(plat_desc->periphbase);
assert(plat_desc->master_to_rn_id_map);
assert(plat_desc->num_masters);
assert(plat_desc->num_masters < CCN_MAX_RN_MASTERS);
/*
* Find the number and properties of fully coherent, IO coherent and IO
* coherent + DVM master interfaces
*/
num_rn_masters = ccn_get_rn_master_info(plat_desc->periphbase, &info);
assert(plat_desc->num_masters < num_rn_masters);
/*
* Iterate through the Request nodes specified by the platform.
* Decrement the count of the masters in the 'info' array for each
* Request node encountered. If the count would drop below 0 then the
* platform's view of this aspect of CCN configuration is incorrect.
*/
for (master_id = 0; master_id < plat_desc->num_masters; master_id++) {
unsigned int node_id;
node_id = plat_desc->master_to_rn_id_map[master_id];
assert(node_id < MAX_RN_NODES);
assert(info.node_desc[node_id]);
info.node_desc[node_id]--;
}
}
#endif /* ENABLE_ASSERTIONS */
/*******************************************************************************
* This function validates parameters passed by the platform (in a debug build)
* and initialises its internal data structures. A lock is required to prevent
* simultaneous CCN operations at runtime (only BL31) to add and remove Request
* nodes from coherency.
******************************************************************************/
void __init ccn_init(const ccn_desc_t *plat_desc)
{
#if ENABLE_ASSERTIONS
ccn_validate_plat_params(plat_desc);
#endif
ccn_plat_desc = plat_desc;
}
/*******************************************************************************
* This function converts a bit map of master interface IDs to a bit map of the
* Request node IDs that they reside on.
******************************************************************************/
static unsigned long long ccn_master_to_rn_id_map(unsigned long long master_map)
{
unsigned long long rn_id_map = 0;
unsigned int node_id, iface_id;
assert(master_map);
assert(ccn_plat_desc);
FOR_EACH_PRESENT_MASTER_INTERFACE(iface_id, master_map) {
assert(iface_id < ccn_plat_desc->num_masters);
/* Convert the master ID into the node ID */
node_id = ccn_plat_desc->master_to_rn_id_map[iface_id];
/* Set the bit corresponding to this node ID */
rn_id_map |= (1ULL << node_id);
}
return rn_id_map;
}
/*******************************************************************************
* This function executes the necessary operations to add or remove Request node
* IDs specified in the 'rn_id_map' bitmap from the snoop/DVM domains specified
* in the 'hn_id_map'. The 'region_id' specifies the ID of the first HN-F/MN
* on which the operation should be performed. 'op_reg_offset' specifies the
* type of operation (add/remove). 'stat_reg_offset' specifies the register
* which should be polled to determine if the operation has completed or not.
******************************************************************************/
static void ccn_snoop_dvm_do_op(unsigned long long rn_id_map,
unsigned long long hn_id_map,
unsigned int region_id,
unsigned int op_reg_offset,
unsigned int stat_reg_offset)
{
unsigned int start_region_id;
assert(ccn_plat_desc);
assert(ccn_plat_desc->periphbase);
#if defined(IMAGE_BL31) || (defined(AARCH32) && defined(IMAGE_BL32))
bakery_lock_get(&ccn_lock);
#endif
start_region_id = region_id;
FOR_EACH_PRESENT_REGION_ID(start_region_id, hn_id_map) {
ccn_reg_write(ccn_plat_desc->periphbase,
start_region_id,
op_reg_offset,
rn_id_map);
}
start_region_id = region_id;
FOR_EACH_PRESENT_REGION_ID(start_region_id, hn_id_map) {
WAIT_FOR_DOMAIN_CTRL_OP_COMPLETION(start_region_id,
stat_reg_offset,
op_reg_offset,
rn_id_map);
}
#if defined(IMAGE_BL31) || (defined(AARCH32) && defined(IMAGE_BL32))
bakery_lock_release(&ccn_lock);
#endif
}
/*******************************************************************************
* The following functions provide the boot and runtime API to the platform for
* adding and removing master interfaces from the snoop/DVM domains. A bitmap of
* master interfaces IDs is passed as a parameter. It is converted into a bitmap
* of Request node IDs using the mapping provided by the platform while
* initialising the driver.
* For example, consider a dual cluster system where the clusters have values 0
* & 1 in the affinity level 1 field of their respective MPIDRs. While
* initialising this driver, the platform provides the mapping between each
* cluster and the corresponding Request node. To add or remove a cluster from
* the snoop and dvm domain, the bit position corresponding to the cluster ID
* should be set in the 'master_iface_map' i.e. to remove both clusters the
* bitmap would equal 0x11.
******************************************************************************/
void ccn_enter_snoop_dvm_domain(unsigned long long master_iface_map)
{
unsigned long long rn_id_map;
rn_id_map = ccn_master_to_rn_id_map(master_iface_map);
ccn_snoop_dvm_do_op(rn_id_map,
CCN_GET_HN_NODEID_MAP(ccn_plat_desc->periphbase,
MN_HNF_NODEID_OFFSET),
HNF_REGION_ID_START,
HNF_SDC_SET_OFFSET,
HNF_SDC_STAT_OFFSET);
ccn_snoop_dvm_do_op(rn_id_map,
CCN_GET_MN_NODEID_MAP(ccn_plat_desc->periphbase),
MN_REGION_ID,
MN_DDC_SET_OFFSET,
MN_DDC_STAT_OFFSET);
}
void ccn_exit_snoop_dvm_domain(unsigned long long master_iface_map)
{
unsigned long long rn_id_map;
rn_id_map = ccn_master_to_rn_id_map(master_iface_map);
ccn_snoop_dvm_do_op(rn_id_map,
CCN_GET_HN_NODEID_MAP(ccn_plat_desc->periphbase,
MN_HNF_NODEID_OFFSET),
HNF_REGION_ID_START,
HNF_SDC_CLR_OFFSET,
HNF_SDC_STAT_OFFSET);
ccn_snoop_dvm_do_op(rn_id_map,
CCN_GET_MN_NODEID_MAP(ccn_plat_desc->periphbase),
MN_REGION_ID,
MN_DDC_CLR_OFFSET,
MN_DDC_STAT_OFFSET);
}
void ccn_enter_dvm_domain(unsigned long long master_iface_map)
{
unsigned long long rn_id_map;
rn_id_map = ccn_master_to_rn_id_map(master_iface_map);
ccn_snoop_dvm_do_op(rn_id_map,
CCN_GET_MN_NODEID_MAP(ccn_plat_desc->periphbase),
MN_REGION_ID,
MN_DDC_SET_OFFSET,
MN_DDC_STAT_OFFSET);
}
void ccn_exit_dvm_domain(unsigned long long master_iface_map)
{
unsigned long long rn_id_map;
rn_id_map = ccn_master_to_rn_id_map(master_iface_map);
ccn_snoop_dvm_do_op(rn_id_map,
CCN_GET_MN_NODEID_MAP(ccn_plat_desc->periphbase),
MN_REGION_ID,
MN_DDC_CLR_OFFSET,
MN_DDC_STAT_OFFSET);
}
/*******************************************************************************
* This function returns the run mode of all the L3 cache partitions in the
* system. The state is expected to be one of NO_L3, SF_ONLY, L3_HAM or
* L3_FAM. Instead of comparing the states reported by all HN-Fs, the state of
* the first present HN-F node is reported. Since the driver does not export an
* interface to program them seperately, there is no reason to perform this
* check. An HN-F could report that the L3 cache is transitioning from one mode
* to another e.g. HNF_PM_NOL3_2_SFONLY. In this case, the function waits for
* the transition to complete and reports the final state.
******************************************************************************/
unsigned int ccn_get_l3_run_mode(void)
{
unsigned long long hnf_pstate_stat;
assert(ccn_plat_desc);
assert(ccn_plat_desc->periphbase);
/*
* Wait for a L3 cache paritition to enter any run mode. The pstate
* parameter is read from an HN-F P-state status register. A non-zero
* value in bits[1:0] means that the cache is transitioning to a run
* mode.
*/
do {
hnf_pstate_stat = ccn_reg_read(ccn_plat_desc->periphbase,
HNF_REGION_ID_START,
HNF_PSTATE_STAT_OFFSET);
} while (hnf_pstate_stat & 0x3);
return PSTATE_TO_RUN_MODE(hnf_pstate_stat);
}
/*******************************************************************************
* This function sets the run mode of all the L3 cache partitions in the
* system to one of NO_L3, SF_ONLY, L3_HAM or L3_FAM depending upon the state
* specified by the 'mode' argument.
******************************************************************************/
void ccn_set_l3_run_mode(unsigned int mode)
{
unsigned long long mn_hnf_id_map, hnf_pstate_stat;
unsigned int region_id;
assert(ccn_plat_desc);
assert(ccn_plat_desc->periphbase);
assert(mode <= CCN_L3_RUN_MODE_FAM);
mn_hnf_id_map = ccn_reg_read(ccn_plat_desc->periphbase,
MN_REGION_ID,
MN_HNF_NODEID_OFFSET);
region_id = HNF_REGION_ID_START;
/* Program the desired run mode */
FOR_EACH_PRESENT_REGION_ID(region_id, mn_hnf_id_map) {
ccn_reg_write(ccn_plat_desc->periphbase,
region_id,
HNF_PSTATE_REQ_OFFSET,
mode);
}
/* Wait for the caches to transition to the run mode */
region_id = HNF_REGION_ID_START;
FOR_EACH_PRESENT_REGION_ID(region_id, mn_hnf_id_map) {
/*
* Wait for a L3 cache paritition to enter a target run
* mode. The pstate parameter is read from an HN-F P-state
* status register.
*/
do {
hnf_pstate_stat = ccn_reg_read(ccn_plat_desc->periphbase,
region_id,
HNF_PSTATE_STAT_OFFSET);
} while (((hnf_pstate_stat & HNF_PSTATE_MASK) >> 2) != mode);
}
}
/*******************************************************************************
* This function configures system address map and provides option to enable the
* 3SN striping mode of Slave node operation. The Slave node IDs and the Top
* Address bit1 and bit0 are provided as parameters to this function. This
* configuration is needed only if network contains a single SN-F or 3 SN-F and
* must be completed before the first request by the system to normal memory.
******************************************************************************/
void ccn_program_sys_addrmap(unsigned int sn0_id,
unsigned int sn1_id,
unsigned int sn2_id,
unsigned int top_addr_bit0,
unsigned int top_addr_bit1,
unsigned char three_sn_en)
{
unsigned long long mn_hnf_id_map, hnf_sam_ctrl_value;
unsigned int region_id;
assert(ccn_plat_desc);
assert(ccn_plat_desc->periphbase);
mn_hnf_id_map = ccn_reg_read(ccn_plat_desc->periphbase,
MN_REGION_ID,
MN_HNF_NODEID_OFFSET);
region_id = HNF_REGION_ID_START;
hnf_sam_ctrl_value = MAKE_HNF_SAM_CTRL_VALUE(sn0_id,
sn1_id,
sn2_id,
top_addr_bit0,
top_addr_bit1,
three_sn_en);
FOR_EACH_PRESENT_REGION_ID(region_id, mn_hnf_id_map) {
/* Program the SAM control register */
ccn_reg_write(ccn_plat_desc->periphbase,
region_id,
HNF_SAM_CTRL_OFFSET,
hnf_sam_ctrl_value);
}
}
/*******************************************************************************
* This function returns the part0 id from the peripheralID 0 register
* in CCN. This id can be used to distinguish the CCN variant present in the
* system.
******************************************************************************/
int ccn_get_part0_id(uintptr_t periphbase)
{
assert(periphbase);
return (int)(mmio_read_64(periphbase
+ MN_PERIPH_ID_0_1_OFFSET) & 0xFF);
}
/*******************************************************************************
* This function returns the region id corresponding to a node_id of node_type.
******************************************************************************/
static unsigned int get_region_id_for_node(node_types_t node_type,
unsigned int node_id)
{
unsigned int mn_reg_off, region_id;
unsigned long long node_bitmap;
unsigned int loc_node_id, node_pos_in_map = 0;
assert(node_type < NUM_NODE_TYPES);
assert(node_id < MAX_RN_NODES);
switch (node_type) {
case NODE_TYPE_RNI:
region_id = RNI_REGION_ID_START;
break;
case NODE_TYPE_HNF:
region_id = HNF_REGION_ID_START;
break;
case NODE_TYPE_HNI:
region_id = HNI_REGION_ID_START;
break;
case NODE_TYPE_SN:
region_id = SBSX_REGION_ID_START;
break;
default:
ERROR("Un-supported Node Type = %d.\n", node_type);
assert(false);
return REGION_ID_LIMIT;
}
/*
* RN-I, HN-F, HN-I, SN node registers in the MN region
* occupy contiguous 16 byte apart offsets.
*
* RN-F and RN-D node are not supported as
* none of them exposes any memory map to
* configure any of their offset registers.
*/
mn_reg_off = MN_RNF_NODEID_OFFSET + (node_type << 4);
node_bitmap = ccn_reg_read(ccn_plat_desc->periphbase,
MN_REGION_ID, mn_reg_off);
assert((node_bitmap & (1ULL << (node_id))) != 0U);
FOR_EACH_PRESENT_NODE_ID(loc_node_id, node_bitmap) {
INFO("Index = %u with loc_nod=%u and input nod=%u\n",
node_pos_in_map, loc_node_id, node_id);
if (loc_node_id == node_id)
break;
node_pos_in_map++;
}
if (node_pos_in_map == CCN_MAX_RN_MASTERS) {
ERROR("Node Id = %d, is not found.\n", node_id);
assert(false);
return REGION_ID_LIMIT;
}
/*
* According to section 3.1.1 in CCN specification, region offset for
* the RN-I components is calculated as (128 + NodeID of RN-I).
*/
if (node_type == NODE_TYPE_RNI)
region_id += node_id;
else
region_id += node_pos_in_map;
return region_id;
}
/*******************************************************************************
* This function sets the value 'val' to the register at register_offset from
* the base address pointed to by the region_id.
* where, region id is mapped to a node_id of node_type.
******************************************************************************/
void ccn_write_node_reg(node_types_t node_type, unsigned int node_id,
unsigned int reg_offset, unsigned long long val)
{
unsigned int region_id = get_region_id_for_node(node_type, node_id);
if (reg_offset > REGION_ID_OFFSET) {
ERROR("Invalid Register offset 0x%x is provided.\n",
reg_offset);
assert(false);
return;
}
/* Setting the value of Auxilary Control Register of the Node */
ccn_reg_write(ccn_plat_desc->periphbase, region_id, reg_offset, val);
VERBOSE("Value is successfully written at address 0x%lx.\n",
(ccn_plat_desc->periphbase
+ region_id_to_base(region_id))
+ reg_offset);
}
/*******************************************************************************
* This function read the value 'val' stored in the register at register_offset
* from the base address pointed to by the region_id.
* where, region id is mapped to a node_id of node_type.
******************************************************************************/
unsigned long long ccn_read_node_reg(node_types_t node_type,
unsigned int node_id,
unsigned int reg_offset)
{
unsigned long long val;
unsigned int region_id = get_region_id_for_node(node_type, node_id);
if (reg_offset > REGION_ID_OFFSET) {
ERROR("Invalid Register offset 0x%x is provided.\n",
reg_offset);
assert(false);
return ULL(0);
}
/* Setting the value of Auxilary Control Register of the Node */
val = ccn_reg_read(ccn_plat_desc->periphbase, region_id, reg_offset);
VERBOSE("Value is successfully read from address 0x%lx.\n",
(ccn_plat_desc->periphbase
+ region_id_to_base(region_id))
+ reg_offset);
return val;
}