include/drivers/arm/gicv2.h - filogic/atf - Gitiles

 /*
  * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */

 #ifndef GICV2_H
 #define GICV2_H

 #include <gic_common.h>

 /*******************************************************************************
  * GICv2 miscellaneous definitions
  ******************************************************************************/

 /* Interrupt group definitions */
 #define GICV2_INTR_GROUP0	U(0)
 #define GICV2_INTR_GROUP1	U(1)

 /* Interrupt IDs reported by the HPPIR and IAR registers */
 #define PENDING_G1_INTID	U(1022)

 /* GICv2 can only target up to 8 PEs */
 #define GICV2_MAX_TARGET_PE	U(8)

 /*******************************************************************************
  * GICv2 specific Distributor interface register offsets and constants.
  ******************************************************************************/
 #define GICD_ITARGETSR		U(0x800)
 #define GICD_SGIR		U(0xF00)
 #define GICD_CPENDSGIR		U(0xF10)
 #define GICD_SPENDSGIR		U(0xF20)
 #define GICD_PIDR2_GICV2	U(0xFE8)

 #define ITARGETSR_SHIFT		2
 #define GIC_TARGET_CPU_MASK	U(0xff)

 #define CPENDSGIR_SHIFT		2
 #define SPENDSGIR_SHIFT		CPENDSGIR_SHIFT

 #define SGIR_TGTLSTFLT_SHIFT	24
 #define SGIR_TGTLSTFLT_MASK	U(0x3)
 #define SGIR_TGTLST_SHIFT	16
 #define SGIR_TGTLST_MASK	U(0xff)
 #define SGIR_INTID_MASK		ULL(0xf)

 #define SGIR_TGT_SPECIFIC	U(0)

 #define GICV2_SGIR_VALUE(tgt_lst_flt, tgt, intid) \
 	((((tgt_lst_flt) & SGIR_TGTLSTFLT_MASK) << SGIR_TGTLSTFLT_SHIFT) | \
 	 (((tgt) & SGIR_TGTLST_MASK) << SGIR_TGTLST_SHIFT) | \
 	 ((intid) & SGIR_INTID_MASK))

 /*******************************************************************************
  * GICv2 specific CPU interface register offsets and constants.
  ******************************************************************************/
 /* Physical CPU Interface registers */
 #define GICC_CTLR		U(0x0)
 #define GICC_PMR		U(0x4)
 #define GICC_BPR		U(0x8)
 #define GICC_IAR		U(0xC)
 #define GICC_EOIR		U(0x10)
 #define GICC_RPR		U(0x14)
 #define GICC_HPPIR		U(0x18)
 #define GICC_AHPPIR		U(0x28)
 #define GICC_IIDR		U(0xFC)
 #define GICC_DIR		U(0x1000)
 #define GICC_PRIODROP		GICC_EOIR

 /* GICC_CTLR bit definitions */
 #define EOI_MODE_NS		BIT_32(10)
 #define EOI_MODE_S		BIT_32(9)
 #define IRQ_BYP_DIS_GRP1	BIT_32(8)
 #define FIQ_BYP_DIS_GRP1	BIT_32(7)
 #define IRQ_BYP_DIS_GRP0	BIT_32(6)
 #define FIQ_BYP_DIS_GRP0	BIT_32(5)
 #define CBPR			BIT_32(4)
 #define FIQ_EN_SHIFT		3
 #define FIQ_EN_BIT		BIT_32(FIQ_EN_SHIFT)
 #define ACK_CTL			BIT_32(2)

 /* GICC_IIDR bit masks and shifts */
 #define GICC_IIDR_PID_SHIFT	20
 #define GICC_IIDR_ARCH_SHIFT	16
 #define GICC_IIDR_REV_SHIFT	12
 #define GICC_IIDR_IMP_SHIFT	0

 #define GICC_IIDR_PID_MASK	U(0xfff)
 #define GICC_IIDR_ARCH_MASK	U(0xf)
 #define GICC_IIDR_REV_MASK	U(0xf)
 #define GICC_IIDR_IMP_MASK	U(0xfff)

 /* HYP view virtual CPU Interface registers */
 #define GICH_CTL		U(0x0)
 #define GICH_VTR		U(0x4)
 #define GICH_ELRSR0		U(0x30)
 #define GICH_ELRSR1		U(0x34)
 #define GICH_APR0		U(0xF0)
 #define GICH_LR_BASE		U(0x100)

 /* Virtual CPU Interface registers */
 #define GICV_CTL		U(0x0)
 #define GICV_PRIMASK		U(0x4)
 #define GICV_BP			U(0x8)
 #define GICV_INTACK		U(0xC)
 #define GICV_EOI		U(0x10)
 #define GICV_RUNNINGPRI		U(0x14)
 #define GICV_HIGHESTPEND	U(0x18)
 #define GICV_DEACTIVATE		U(0x1000)

 /* GICD_CTLR bit definitions */
 #define CTLR_ENABLE_G1_SHIFT		1
 #define CTLR_ENABLE_G1_MASK		U(0x1)
 #define CTLR_ENABLE_G1_BIT		BIT_32(CTLR_ENABLE_G1_SHIFT)

 /* Interrupt ID mask for HPPIR, AHPPIR, IAR and AIAR CPU Interface registers */
 #define INT_ID_MASK		U(0x3ff)

 #ifndef __ASSEMBLY__

 #include <cdefs.h>
 #include <interrupt_props.h>
 #include <stdint.h>

 /*******************************************************************************
  * This structure describes some of the implementation defined attributes of
  * the GICv2 IP. It is used by the platform port to specify these attributes
  * in order to initialize the GICv2 driver. The attributes are described
  * below.
  *
  * The 'gicd_base' field contains the base address of the Distributor interface
  * programmer's view.
  *
  * The 'gicc_base' field contains the base address of the CPU Interface
  * programmer's view.
  *
  * The 'target_masks' is a pointer to an array containing 'target_masks_num'
  * elements. The GIC driver will populate the array with per-PE target mask to
  * use to when targeting interrupts.
  *
  * The 'interrupt_props' field is a pointer to an array that enumerates secure
  * interrupts and their properties. If this field is not NULL, both
  * 'g0_interrupt_array' and 'g1s_interrupt_array' fields are ignored.
  *
  * The 'interrupt_props_num' field contains the number of entries in the
  * 'interrupt_props' array. If this field is non-zero, 'g0_interrupt_num' is
  * ignored.
  ******************************************************************************/
 typedef struct gicv2_driver_data {
 	uintptr_t gicd_base;
 	uintptr_t gicc_base;
 	unsigned int *target_masks;
 	unsigned int target_masks_num;
 	const interrupt_prop_t *interrupt_props;
 	unsigned int interrupt_props_num;
 } gicv2_driver_data_t;

 /*******************************************************************************
  * Function prototypes
  ******************************************************************************/
 void gicv2_driver_init(const gicv2_driver_data_t *plat_driver_data);
 void gicv2_distif_init(void);
 void gicv2_pcpu_distif_init(void);
 void gicv2_cpuif_enable(void);
 void gicv2_cpuif_disable(void);
 unsigned int gicv2_is_fiq_enabled(void);
 unsigned int gicv2_get_pending_interrupt_type(void);
 unsigned int gicv2_get_pending_interrupt_id(void);
 unsigned int gicv2_acknowledge_interrupt(void);
 void gicv2_end_of_interrupt(unsigned int id);
 unsigned int gicv2_get_interrupt_group(unsigned int id);
 unsigned int gicv2_get_running_priority(void);
 void gicv2_set_pe_target_mask(unsigned int proc_num);
 unsigned int gicv2_get_interrupt_active(unsigned int id);
 void gicv2_enable_interrupt(unsigned int id);
 void gicv2_disable_interrupt(unsigned int id);
 void gicv2_set_interrupt_priority(unsigned int id, unsigned int priority);
 void gicv2_set_interrupt_type(unsigned int id, unsigned int type);
 void gicv2_raise_sgi(int sgi_num, int proc_num);
 void gicv2_set_spi_routing(unsigned int id, int proc_num);
 void gicv2_set_interrupt_pending(unsigned int id);
 void gicv2_clear_interrupt_pending(unsigned int id);
 unsigned int gicv2_set_pmr(unsigned int mask);
 void gicv2_interrupt_set_cfg(unsigned int id, unsigned int cfg);

 #endif /* __ASSEMBLY__ */
 #endif /* GICV2_H */
	/*
	* Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
	*
	* SPDX-License-Identifier: BSD-3-Clause
	*/

	#ifndef GICV2_H
	#define GICV2_H

	#include <gic_common.h>

	/*******************************************************************************
	* GICv2 miscellaneous definitions
	******************************************************************************/

	/* Interrupt group definitions */
	#define GICV2_INTR_GROUP0 U(0)
	#define GICV2_INTR_GROUP1 U(1)

	/* Interrupt IDs reported by the HPPIR and IAR registers */
	#define PENDING_G1_INTID U(1022)

	/* GICv2 can only target up to 8 PEs */
	#define GICV2_MAX_TARGET_PE U(8)

	/*******************************************************************************
	* GICv2 specific Distributor interface register offsets and constants.
	******************************************************************************/
	#define GICD_ITARGETSR U(0x800)
	#define GICD_SGIR U(0xF00)
	#define GICD_CPENDSGIR U(0xF10)
	#define GICD_SPENDSGIR U(0xF20)
	#define GICD_PIDR2_GICV2 U(0xFE8)

	#define ITARGETSR_SHIFT 2
	#define GIC_TARGET_CPU_MASK U(0xff)

	#define CPENDSGIR_SHIFT 2
	#define SPENDSGIR_SHIFT CPENDSGIR_SHIFT

	#define SGIR_TGTLSTFLT_SHIFT 24
	#define SGIR_TGTLSTFLT_MASK U(0x3)
	#define SGIR_TGTLST_SHIFT 16
	#define SGIR_TGTLST_MASK U(0xff)
	#define SGIR_INTID_MASK ULL(0xf)

	#define SGIR_TGT_SPECIFIC U(0)

	#define GICV2_SGIR_VALUE(tgt_lst_flt, tgt, intid) \
	((((tgt_lst_flt) & SGIR_TGTLSTFLT_MASK) << SGIR_TGTLSTFLT_SHIFT) \| \
	(((tgt) & SGIR_TGTLST_MASK) << SGIR_TGTLST_SHIFT) \| \
	((intid) & SGIR_INTID_MASK))

	/*******************************************************************************
	* GICv2 specific CPU interface register offsets and constants.
	******************************************************************************/
	/* Physical CPU Interface registers */
	#define GICC_CTLR U(0x0)
	#define GICC_PMR U(0x4)
	#define GICC_BPR U(0x8)
	#define GICC_IAR U(0xC)
	#define GICC_EOIR U(0x10)
	#define GICC_RPR U(0x14)
	#define GICC_HPPIR U(0x18)
	#define GICC_AHPPIR U(0x28)
	#define GICC_IIDR U(0xFC)
	#define GICC_DIR U(0x1000)
	#define GICC_PRIODROP GICC_EOIR

	/* GICC_CTLR bit definitions */
	#define EOI_MODE_NS BIT_32(10)
	#define EOI_MODE_S BIT_32(9)
	#define IRQ_BYP_DIS_GRP1 BIT_32(8)
	#define FIQ_BYP_DIS_GRP1 BIT_32(7)
	#define IRQ_BYP_DIS_GRP0 BIT_32(6)
	#define FIQ_BYP_DIS_GRP0 BIT_32(5)
	#define CBPR BIT_32(4)
	#define FIQ_EN_SHIFT 3
	#define FIQ_EN_BIT BIT_32(FIQ_EN_SHIFT)
	#define ACK_CTL BIT_32(2)

	/* GICC_IIDR bit masks and shifts */
	#define GICC_IIDR_PID_SHIFT 20
	#define GICC_IIDR_ARCH_SHIFT 16
	#define GICC_IIDR_REV_SHIFT 12
	#define GICC_IIDR_IMP_SHIFT 0

	#define GICC_IIDR_PID_MASK U(0xfff)
	#define GICC_IIDR_ARCH_MASK U(0xf)
	#define GICC_IIDR_REV_MASK U(0xf)
	#define GICC_IIDR_IMP_MASK U(0xfff)

	/* HYP view virtual CPU Interface registers */
	#define GICH_CTL U(0x0)
	#define GICH_VTR U(0x4)
	#define GICH_ELRSR0 U(0x30)
	#define GICH_ELRSR1 U(0x34)
	#define GICH_APR0 U(0xF0)
	#define GICH_LR_BASE U(0x100)

	/* Virtual CPU Interface registers */
	#define GICV_CTL U(0x0)
	#define GICV_PRIMASK U(0x4)
	#define GICV_BP U(0x8)
	#define GICV_INTACK U(0xC)
	#define GICV_EOI U(0x10)
	#define GICV_RUNNINGPRI U(0x14)
	#define GICV_HIGHESTPEND U(0x18)
	#define GICV_DEACTIVATE U(0x1000)

	/* GICD_CTLR bit definitions */
	#define CTLR_ENABLE_G1_SHIFT 1
	#define CTLR_ENABLE_G1_MASK U(0x1)
	#define CTLR_ENABLE_G1_BIT BIT_32(CTLR_ENABLE_G1_SHIFT)

	/* Interrupt ID mask for HPPIR, AHPPIR, IAR and AIAR CPU Interface registers */
	#define INT_ID_MASK U(0x3ff)

	#ifndef __ASSEMBLY__

	#include <cdefs.h>
	#include <interrupt_props.h>
	#include <stdint.h>

	/*******************************************************************************
	* This structure describes some of the implementation defined attributes of
	* the GICv2 IP. It is used by the platform port to specify these attributes
	* in order to initialize the GICv2 driver. The attributes are described
	* below.
	*
	* The 'gicd_base' field contains the base address of the Distributor interface
	* programmer's view.
	*
	* The 'gicc_base' field contains the base address of the CPU Interface
	* programmer's view.
	*
	* The 'target_masks' is a pointer to an array containing 'target_masks_num'
	* elements. The GIC driver will populate the array with per-PE target mask to
	* use to when targeting interrupts.
	*
	* The 'interrupt_props' field is a pointer to an array that enumerates secure
	* interrupts and their properties. If this field is not NULL, both
	* 'g0_interrupt_array' and 'g1s_interrupt_array' fields are ignored.
	*
	* The 'interrupt_props_num' field contains the number of entries in the
	* 'interrupt_props' array. If this field is non-zero, 'g0_interrupt_num' is
	* ignored.
	******************************************************************************/
	typedef struct gicv2_driver_data {
	uintptr_t gicd_base;
	uintptr_t gicc_base;
	unsigned int *target_masks;
	unsigned int target_masks_num;
	const interrupt_prop_t *interrupt_props;
	unsigned int interrupt_props_num;
	} gicv2_driver_data_t;

	/*******************************************************************************
	* Function prototypes
	******************************************************************************/
	void gicv2_driver_init(const gicv2_driver_data_t *plat_driver_data);
	void gicv2_distif_init(void);
	void gicv2_pcpu_distif_init(void);
	void gicv2_cpuif_enable(void);
	void gicv2_cpuif_disable(void);
	unsigned int gicv2_is_fiq_enabled(void);
	unsigned int gicv2_get_pending_interrupt_type(void);
	unsigned int gicv2_get_pending_interrupt_id(void);
	unsigned int gicv2_acknowledge_interrupt(void);
	void gicv2_end_of_interrupt(unsigned int id);
	unsigned int gicv2_get_interrupt_group(unsigned int id);
	unsigned int gicv2_get_running_priority(void);
	void gicv2_set_pe_target_mask(unsigned int proc_num);
	unsigned int gicv2_get_interrupt_active(unsigned int id);
	void gicv2_enable_interrupt(unsigned int id);
	void gicv2_disable_interrupt(unsigned int id);
	void gicv2_set_interrupt_priority(unsigned int id, unsigned int priority);
	void gicv2_set_interrupt_type(unsigned int id, unsigned int type);
	void gicv2_raise_sgi(int sgi_num, int proc_num);
	void gicv2_set_spi_routing(unsigned int id, int proc_num);
	void gicv2_set_interrupt_pending(unsigned int id);
	void gicv2_clear_interrupt_pending(unsigned int id);
	unsigned int gicv2_set_pmr(unsigned int mask);
	void gicv2_interrupt_set_cfg(unsigned int id, unsigned int cfg);

	#endif /* __ASSEMBLY__ */
	#endif /* GICV2_H */