| /* |
| * Copyright (c) 2015-2016, ARM Limited and Contributors. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * |
| * Redistributions of source code must retain the above copyright notice, this |
| * list of conditions and the following disclaimer. |
| * |
| * Redistributions in binary form must reproduce the above copyright notice, |
| * this list of conditions and the following disclaimer in the documentation |
| * and/or other materials provided with the distribution. |
| * |
| * Neither the name of ARM nor the names of its contributors may be used |
| * to endorse or promote products derived from this software without specific |
| * prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #ifndef __GICV3_H__ |
| #define __GICV3_H__ |
| |
| /******************************************************************************* |
| * GICv3 miscellaneous definitions |
| ******************************************************************************/ |
| /* Interrupt group definitions */ |
| #define INTR_GROUP1S 0 |
| #define INTR_GROUP0 1 |
| #define INTR_GROUP1NS 2 |
| |
| /* Interrupt IDs reported by the HPPIR and IAR registers */ |
| #define PENDING_G1S_INTID 1020 |
| #define PENDING_G1NS_INTID 1021 |
| |
| /* Constant to categorize LPI interrupt */ |
| #define MIN_LPI_ID 8192 |
| |
| /******************************************************************************* |
| * GICv3 specific Distributor interface register offsets and constants. |
| ******************************************************************************/ |
| #define GICD_STATUSR 0x10 |
| #define GICD_SETSPI_NSR 0x40 |
| #define GICD_CLRSPI_NSR 0x48 |
| #define GICD_SETSPI_SR 0x50 |
| #define GICD_CLRSPI_SR 0x50 |
| #define GICD_IGRPMODR 0xd00 |
| /* |
| * GICD_IROUTER<n> register is at 0x6000 + 8n, where n is the interrupt id and |
| * n >= 32, making the effective offset as 0x6100. |
| */ |
| #define GICD_IROUTER 0x6000 |
| #define GICD_PIDR2_GICV3 0xffe8 |
| |
| #define IGRPMODR_SHIFT 5 |
| |
| /* GICD_CTLR bit definitions */ |
| #define CTLR_ENABLE_G1NS_SHIFT 1 |
| #define CTLR_ENABLE_G1S_SHIFT 2 |
| #define CTLR_ARE_S_SHIFT 4 |
| #define CTLR_ARE_NS_SHIFT 5 |
| #define CTLR_DS_SHIFT 6 |
| #define CTLR_E1NWF_SHIFT 7 |
| #define GICD_CTLR_RWP_SHIFT 31 |
| |
| #define CTLR_ENABLE_G1NS_MASK 0x1 |
| #define CTLR_ENABLE_G1S_MASK 0x1 |
| #define CTLR_ARE_S_MASK 0x1 |
| #define CTLR_ARE_NS_MASK 0x1 |
| #define CTLR_DS_MASK 0x1 |
| #define CTLR_E1NWF_MASK 0x1 |
| #define GICD_CTLR_RWP_MASK 0x1 |
| |
| #define CTLR_ENABLE_G1NS_BIT (1 << CTLR_ENABLE_G1NS_SHIFT) |
| #define CTLR_ENABLE_G1S_BIT (1 << CTLR_ENABLE_G1S_SHIFT) |
| #define CTLR_ARE_S_BIT (1 << CTLR_ARE_S_SHIFT) |
| #define CTLR_ARE_NS_BIT (1 << CTLR_ARE_NS_SHIFT) |
| #define CTLR_DS_BIT (1 << CTLR_DS_SHIFT) |
| #define CTLR_E1NWF_BIT (1 << CTLR_E1NWF_SHIFT) |
| #define GICD_CTLR_RWP_BIT (1 << GICD_CTLR_RWP_SHIFT) |
| |
| /* GICD_IROUTER shifts and masks */ |
| #define IROUTER_IRM_SHIFT 31 |
| #define IROUTER_IRM_MASK 0x1 |
| |
| /******************************************************************************* |
| * GICv3 Re-distributor interface registers & constants |
| ******************************************************************************/ |
| #define GICR_PCPUBASE_SHIFT 0x11 |
| #define GICR_SGIBASE_OFFSET (1 << 0x10) /* 64 KB */ |
| #define GICR_CTLR 0x0 |
| #define GICR_TYPER 0x08 |
| #define GICR_WAKER 0x14 |
| #define GICR_IGROUPR0 (GICR_SGIBASE_OFFSET + 0x80) |
| #define GICR_ISENABLER0 (GICR_SGIBASE_OFFSET + 0x100) |
| #define GICR_ICENABLER0 (GICR_SGIBASE_OFFSET + 0x180) |
| #define GICR_IPRIORITYR (GICR_SGIBASE_OFFSET + 0x400) |
| #define GICR_ICFGR0 (GICR_SGIBASE_OFFSET + 0xc00) |
| #define GICR_ICFGR1 (GICR_SGIBASE_OFFSET + 0xc04) |
| #define GICR_IGRPMODR0 (GICR_SGIBASE_OFFSET + 0xd00) |
| |
| /* GICR_CTLR bit definitions */ |
| #define GICR_CTLR_RWP_SHIFT 3 |
| #define GICR_CTLR_RWP_MASK 0x1 |
| #define GICR_CTLR_RWP_BIT (1 << GICR_CTLR_RWP_SHIFT) |
| |
| /* GICR_WAKER bit definitions */ |
| #define WAKER_CA_SHIFT 2 |
| #define WAKER_PS_SHIFT 1 |
| |
| #define WAKER_CA_MASK 0x1 |
| #define WAKER_PS_MASK 0x1 |
| |
| #define WAKER_CA_BIT (1 << WAKER_CA_SHIFT) |
| #define WAKER_PS_BIT (1 << WAKER_PS_SHIFT) |
| |
| /* GICR_TYPER bit definitions */ |
| #define TYPER_AFF_VAL_SHIFT 32 |
| #define TYPER_PROC_NUM_SHIFT 8 |
| #define TYPER_LAST_SHIFT 4 |
| |
| #define TYPER_AFF_VAL_MASK 0xffffffff |
| #define TYPER_PROC_NUM_MASK 0xffff |
| #define TYPER_LAST_MASK 0x1 |
| |
| #define TYPER_LAST_BIT (1 << TYPER_LAST_SHIFT) |
| |
| /******************************************************************************* |
| * GICv3 CPU interface registers & constants |
| ******************************************************************************/ |
| /* ICC_SRE bit definitions*/ |
| #define ICC_SRE_EN_BIT (1 << 3) |
| #define ICC_SRE_DIB_BIT (1 << 2) |
| #define ICC_SRE_DFB_BIT (1 << 1) |
| #define ICC_SRE_SRE_BIT (1 << 0) |
| |
| /* ICC_IGRPEN1_EL3 bit definitions */ |
| #define IGRPEN1_EL3_ENABLE_G1NS_SHIFT 0 |
| #define IGRPEN1_EL3_ENABLE_G1S_SHIFT 1 |
| |
| #define IGRPEN1_EL3_ENABLE_G1NS_BIT (1 << IGRPEN1_EL3_ENABLE_G1NS_SHIFT) |
| #define IGRPEN1_EL3_ENABLE_G1S_BIT (1 << IGRPEN1_EL3_ENABLE_G1S_SHIFT) |
| |
| /* ICC_IGRPEN0_EL1 bit definitions */ |
| #define IGRPEN1_EL1_ENABLE_G0_SHIFT 0 |
| #define IGRPEN1_EL1_ENABLE_G0_BIT (1 << IGRPEN1_EL1_ENABLE_G0_SHIFT) |
| |
| /* ICC_HPPIR0_EL1 bit definitions */ |
| #define HPPIR0_EL1_INTID_SHIFT 0 |
| #define HPPIR0_EL1_INTID_MASK 0xffffff |
| |
| /* ICC_HPPIR1_EL1 bit definitions */ |
| #define HPPIR1_EL1_INTID_SHIFT 0 |
| #define HPPIR1_EL1_INTID_MASK 0xffffff |
| |
| /* ICC_IAR0_EL1 bit definitions */ |
| #define IAR0_EL1_INTID_SHIFT 0 |
| #define IAR0_EL1_INTID_MASK 0xffffff |
| |
| /* ICC_IAR1_EL1 bit definitions */ |
| #define IAR1_EL1_INTID_SHIFT 0 |
| #define IAR1_EL1_INTID_MASK 0xffffff |
| |
| #ifndef __ASSEMBLY__ |
| |
| #include <stdint.h> |
| #include <types.h> |
| |
| #define gicv3_is_intr_id_special_identifier(id) \ |
| (((id) >= PENDING_G1S_INTID) && ((id) <= GIC_SPURIOUS_INTERRUPT)) |
| |
| /******************************************************************************* |
| * Helper GICv3 macros for SEL1 |
| ******************************************************************************/ |
| #define gicv3_acknowledge_interrupt_sel1() read_icc_iar1_el1() &\ |
| IAR1_EL1_INTID_MASK |
| #define gicv3_get_pending_interrupt_id_sel1() read_icc_hppir1_el1() &\ |
| HPPIR1_EL1_INTID_MASK |
| #define gicv3_end_of_interrupt_sel1(id) write_icc_eoir1_el1(id) |
| |
| |
| /******************************************************************************* |
| * Helper GICv3 macros for EL3 |
| ******************************************************************************/ |
| #define gicv3_acknowledge_interrupt() read_icc_iar0_el1() &\ |
| IAR0_EL1_INTID_MASK |
| #define gicv3_end_of_interrupt(id) write_icc_eoir0_el1(id) |
| |
| /******************************************************************************* |
| * This structure describes some of the implementation defined attributes of the |
| * GICv3 IP. It is used by the platform port to specify these attributes in order |
| * to initialise the GICV3 driver. The attributes are described below. |
| * |
| * 1. The 'gicd_base' field contains the base address of the Distributor |
| * interface programmer's view. |
| * |
| * 2. The 'gicr_base' field contains the base address of the Re-distributor |
| * interface programmer's view. |
| * |
| * 3. The 'g0_interrupt_array' field is a ponter to an array in which each |
| * entry corresponds to an ID of a Group 0 interrupt. |
| * |
| * 4. The 'g0_interrupt_num' field contains the number of entries in the |
| * 'g0_interrupt_array'. |
| * |
| * 5. The 'g1s_interrupt_array' field is a ponter to an array in which each |
| * entry corresponds to an ID of a Group 1 interrupt. |
| * |
| * 6. The 'g1s_interrupt_num' field contains the number of entries in the |
| * 'g1s_interrupt_array'. |
| * |
| * 7. The 'rdistif_num' field contains the number of Redistributor interfaces |
| * the GIC implements. This is equal to the number of CPUs or CPU interfaces |
| * instantiated in the GIC. |
| * |
| * 8. The 'rdistif_base_addrs' field is a pointer to an array that has an entry |
| * for storing the base address of the Redistributor interface frame of each |
| * CPU in the system. The size of the array = 'rdistif_num'. The base |
| * addresses are detected during driver initialisation. |
| * |
| * 9. The 'mpidr_to_core_pos' field is a pointer to a hash function which the |
| * driver will use to convert an MPIDR value to a linear core index. This |
| * index will be used for accessing the 'rdistif_base_addrs' array. This is |
| * an optional field. A GICv3 implementation maps each MPIDR to a linear core |
| * index as well. This mapping can be found by reading the "Affinity Value" |
| * and "Processor Number" fields in the GICR_TYPER. It is IMP. DEF. if the |
| * "Processor Numbers" are suitable to index into an array to access core |
| * specific information. If this not the case, the platform port must provide |
| * a hash function. Otherwise, the "Processor Number" field will be used to |
| * access the array elements. |
| ******************************************************************************/ |
| typedef unsigned int (*mpidr_hash_fn)(u_register_t mpidr); |
| |
| typedef struct gicv3_driver_data { |
| uintptr_t gicd_base; |
| uintptr_t gicr_base; |
| unsigned int g0_interrupt_num; |
| unsigned int g1s_interrupt_num; |
| const unsigned int *g0_interrupt_array; |
| const unsigned int *g1s_interrupt_array; |
| unsigned int rdistif_num; |
| uintptr_t *rdistif_base_addrs; |
| mpidr_hash_fn mpidr_to_core_pos; |
| } gicv3_driver_data_t; |
| |
| /******************************************************************************* |
| * GICv3 EL3 driver API |
| ******************************************************************************/ |
| void gicv3_driver_init(const gicv3_driver_data_t *plat_driver_data); |
| void gicv3_distif_init(void); |
| void gicv3_rdistif_init(unsigned int proc_num); |
| void gicv3_cpuif_enable(unsigned int proc_num); |
| void gicv3_cpuif_disable(unsigned int proc_num); |
| unsigned int gicv3_get_pending_interrupt_type(void); |
| unsigned int gicv3_get_pending_interrupt_id(void); |
| unsigned int gicv3_get_interrupt_type(unsigned int id, |
| unsigned int proc_num); |
| |
| |
| #endif /* __ASSEMBLY__ */ |
| #endif /* __GICV3_H__ */ |