| EL3 Runtime Service Writer's Guide |
| ===================================================== |
| |
| Introduction |
| ------------ |
| |
| This document describes how to add a runtime service to the EL3 Runtime |
| Firmware component of Trusted Firmware-A (TF-A), BL31. |
| |
| Software executing in the normal world and in the trusted world at exception |
| levels lower than EL3 will request runtime services using the Secure Monitor |
| Call (SMC) instruction. These requests will follow the convention described in |
| the SMC Calling Convention PDD (`SMCCC`_). The `SMCCC`_ assigns function |
| identifiers to each SMC request and describes how arguments are passed and |
| results are returned. |
| |
| SMC Functions are grouped together based on the implementor of the service, for |
| example a subset of the Function IDs are designated as "OEM Calls" (see `SMCCC`_ |
| for full details). The EL3 runtime services framework in BL31 enables the |
| independent implementation of services for each group, which are then compiled |
| into the BL31 image. This simplifies the integration of common software from |
| Arm to support `PSCI`_, Secure Monitor for a Trusted OS and SoC specific |
| software. The common runtime services framework ensures that SMC Functions are |
| dispatched to their respective service implementation - the |
| :ref:`Firmware Design` document provides details of how this is achieved. |
| |
| The interface and operation of the runtime services depends heavily on the |
| concepts and definitions described in the `SMCCC`_, in particular SMC Function |
| IDs, Owning Entity Numbers (OEN), Fast and Standard calls, and the SMC32 and |
| SMC64 calling conventions. Please refer to that document for a full explanation |
| of these terms. |
| |
| Owning Entities, Call Types and Function IDs |
| -------------------------------------------- |
| |
| The SMC Function Identifier includes a OEN field. These values and their |
| meaning are described in `SMCCC`_ and summarized in table 1 below. Some entities |
| are allocated a range of of OENs. The OEN must be interpreted in conjunction |
| with the SMC call type, which is either *Fast* or *Yielding*. Fast calls are |
| uninterruptible whereas Yielding calls can be pre-empted. The majority of |
| Owning Entities only have allocated ranges for Fast calls: Yielding calls are |
| reserved exclusively for Trusted OS providers or for interoperability with |
| legacy 32-bit software that predates the `SMCCC`_. |
| |
| :: |
| |
| Type OEN Service |
| Fast 0 Arm Architecture calls |
| Fast 1 CPU Service calls |
| Fast 2 SiP Service calls |
| Fast 3 OEM Service calls |
| Fast 4 Standard Secure Service calls |
| Fast 5 Standard Hypervisor Service Calls |
| Fast 6 Vendor Specific Hypervisor Service Calls |
| Fast 7 Vendor Specific EL3 Monitor Calls |
| Fast 8-47 Reserved for future use |
| Fast 48-49 Trusted Application calls |
| Fast 50-63 Trusted OS calls |
| |
| Yielding 0- 1 Reserved for existing Armv7-A calls |
| Yielding 2-63 Trusted OS Standard Calls |
| |
| *Table 1: Service types and their corresponding Owning Entity Numbers* |
| |
| Each individual entity can allocate the valid identifiers within the entity |
| range as they need - it is not necessary to coordinate with other entities of |
| the same type. For example, two SoC providers can use the same Function ID |
| within the SiP Service calls OEN range to mean different things - as these |
| calls should be specific to the SoC. The Standard Runtime Calls OEN is used for |
| services defined by Arm standards, such as `PSCI`_. |
| |
| The SMC Function ID also indicates whether the call has followed the SMC32 |
| calling convention, where all parameters are 32-bit, or the SMC64 calling |
| convention, where the parameters are 64-bit. The framework identifies and |
| rejects invalid calls that use the SMC64 calling convention but that originate |
| from an AArch32 caller. |
| |
| The EL3 runtime services framework uses the call type and OEN to identify a |
| specific handler for each SMC call, but it is expected that an individual |
| handler will be responsible for all SMC Functions within a given service type. |
| |
| Getting started |
| --------------- |
| |
| TF-A has a ``services`` directory in the source tree under which |
| each owning entity can place the implementation of its runtime service. The |
| `PSCI`_ implementation is located here in the ``lib/psci`` directory. |
| |
| Runtime service sources will need to include the ``runtime_svc.h`` header file. |
| |
| Registering a runtime service |
| ----------------------------- |
| |
| A runtime service is registered using the ``DECLARE_RT_SVC()`` macro, specifying |
| the name of the service, the range of OENs covered, the type of service and |
| initialization and call handler functions. |
| |
| .. code:: c |
| |
| #define DECLARE_RT_SVC(_name, _start, _end, _type, _setup, _smch) |
| |
| - ``_name`` is used to identify the data structure declared by this macro, and |
| is also used for diagnostic purposes |
| |
| - ``_start`` and ``_end`` values must be based on the ``OEN_*`` values defined in |
| ``smccc.h`` |
| |
| - ``_type`` must be one of ``SMC_TYPE_FAST`` or ``SMC_TYPE_YIELD`` |
| |
| - ``_setup`` is the initialization function with the ``rt_svc_init`` signature: |
| |
| .. code:: c |
| |
| typedef int32_t (*rt_svc_init)(void); |
| |
| - ``_smch`` is the SMC handler function with the ``rt_svc_handle`` signature: |
| |
| .. code:: c |
| |
| typedef uintptr_t (*rt_svc_handle_t)(uint32_t smc_fid, |
| u_register_t x1, u_register_t x2, |
| u_register_t x3, u_register_t x4, |
| void *cookie, |
| void *handle, |
| u_register_t flags); |
| |
| Details of the requirements and behavior of the two callbacks is provided in |
| the following sections. |
| |
| During initialization the services framework validates each declared service |
| to ensure that the following conditions are met: |
| |
| #. The ``_start`` OEN is not greater than the ``_end`` OEN |
| #. The ``_end`` OEN does not exceed the maximum OEN value (63) |
| #. The ``_type`` is one of ``SMC_TYPE_FAST`` or ``SMC_TYPE_YIELD`` |
| #. ``_setup`` and ``_smch`` routines have been specified |
| |
| ``std_svc_setup.c`` provides an example of registering a runtime service: |
| |
| .. code:: c |
| |
| /* Register Standard Service Calls as runtime service */ |
| DECLARE_RT_SVC( |
| std_svc, |
| OEN_STD_START, |
| OEN_STD_END, |
| SMC_TYPE_FAST, |
| std_svc_setup, |
| std_svc_smc_handler |
| ); |
| |
| Initializing a runtime service |
| ------------------------------ |
| |
| Runtime services are initialized once, during cold boot, by the primary CPU |
| after platform and architectural initialization is complete. The framework |
| performs basic validation of the declared service before calling |
| the service initialization function (``_setup`` in the declaration). This |
| function must carry out any essential EL3 initialization prior to receiving a |
| SMC Function call via the handler function. |
| |
| On success, the initialization function must return ``0``. Any other return value |
| will cause the framework to issue a diagnostic: |
| |
| :: |
| |
| Error initializing runtime service <name of the service> |
| |
| and then ignore the service - the system will continue to boot but SMC calls |
| will not be passed to the service handler and instead return the *Unknown SMC |
| Function ID* result ``0xFFFFFFFF``. |
| |
| If the system must not be allowed to proceed without the service, the |
| initialization function must itself cause the firmware boot to be halted. |
| |
| If the service uses per-CPU data this must either be initialized for all CPUs |
| during this call, or be done lazily when a CPU first issues an SMC call to that |
| service. |
| |
| Handling runtime service requests |
| --------------------------------- |
| |
| SMC calls for a service are forwarded by the framework to the service's SMC |
| handler function (``_smch`` in the service declaration). This function must have |
| the following signature: |
| |
| .. code:: c |
| |
| typedef uintptr_t (*rt_svc_handle_t)(uint32_t smc_fid, |
| u_register_t x1, u_register_t x2, |
| u_register_t x3, u_register_t x4, |
| void *cookie, |
| void *handle, |
| u_register_t flags); |
| |
| The handler is responsible for: |
| |
| #. Determining that ``smc_fid`` is a valid and supported SMC Function ID, |
| otherwise completing the request with the *Unknown SMC Function ID*: |
| |
| .. code:: c |
| |
| SMC_RET1(handle, SMC_UNK); |
| |
| #. Determining if the requested function is valid for the calling security |
| state. SMC Calls can be made from Non-secure, Secure or Realm worlds and |
| the framework will forward all calls to the service handler. |
| |
| The ``flags`` parameter to this function indicates the caller security state |
| in bits 0 and 5. The ``is_caller_secure(flags)``, ``is_caller_non_secure(flags)`` |
| and ``is_caller_realm(flags)`` helper functions can be used to determine whether |
| the caller's security state is Secure, Non-secure or Realm respectively. |
| |
| If invalid, the request should be completed with: |
| |
| .. code:: c |
| |
| SMC_RET1(handle, SMC_UNK); |
| |
| #. Truncating parameters for calls made using the SMC32 calling convention. |
| Such calls can be determined by checking the CC field in bit[30] of the |
| ``smc_fid`` parameter, for example by using: |
| |
| :: |
| |
| if (GET_SMC_CC(smc_fid) == SMC_32) ... |
| |
| For such calls, the upper bits of the parameters x1-x4 and the saved |
| parameters X5-X7 are UNDEFINED and must be explicitly ignored by the |
| handler. This can be done by truncating the values to a suitable 32-bit |
| integer type before use, for example by ensuring that functions defined |
| to handle individual SMC Functions use appropriate 32-bit parameters. |
| |
| #. Providing the service requested by the SMC Function, utilizing the |
| immediate parameters x1-x4 and/or the additional saved parameters X5-X7. |
| The latter can be retrieved using the ``SMC_GET_GP(handle, ref)`` function, |
| supplying the appropriate ``CTX_GPREG_Xn`` reference, e.g. |
| |
| .. code:: c |
| |
| uint64_t x6 = SMC_GET_GP(handle, CTX_GPREG_X6); |
| |
| #. Implementing the standard SMC32 Functions that provide information about |
| the implementation of the service. These are the Call Count, Implementor |
| UID and Revision Details for each service documented in section 6 of the |
| `SMCCC`_. |
| |
| TF-A expects owning entities to follow this recommendation. |
| |
| #. Returning the result to the caller. Based on `SMCCC`_ spec, results are |
| returned in W0-W7(X0-X7) registers for SMC32(SMC64) calls from AArch64 |
| state. Results are returned in R0-R7 registers for SMC32 calls from AArch32 |
| state. The framework provides a family of macros to set the multi-register |
| return value and complete the handler: |
| |
| .. code:: c |
| |
| AArch64 state: |
| |
| SMC_RET1(handle, x0); |
| SMC_RET2(handle, x0, x1); |
| SMC_RET3(handle, x0, x1, x2); |
| SMC_RET4(handle, x0, x1, x2, x3); |
| SMC_RET5(handle, x0, x1, x2, x3, x4); |
| SMC_RET6(handle, x0, x1, x2, x3, x4, x5); |
| SMC_RET7(handle, x0, x1, x2, x3, x4, x5, x6); |
| SMC_RET8(handle, x0, x1, x2, x3, x4, x5, x6, x7); |
| |
| AArch32 state: |
| |
| SMC_RET1(handle, r0); |
| SMC_RET2(handle, r0, r1); |
| SMC_RET3(handle, r0, r1, r2); |
| SMC_RET4(handle, r0, r1, r2, r3); |
| SMC_RET5(handle, r0, r1, r2, r3, r4); |
| SMC_RET6(handle, r0, r1, r2, r3, r4, r5); |
| SMC_RET7(handle, r0, r1, r2, r3, r4, r5, r6); |
| SMC_RET8(handle, r0, r1, r2, r3, r4, r5, r6, r7); |
| |
| The ``cookie`` parameter to the handler is reserved for future use and can be |
| ignored. The ``handle`` is returned by the SMC handler - completion of the |
| handler function must always be via one of the ``SMC_RETn()`` macros. |
| |
| .. note:: |
| The PSCI and Test Secure-EL1 Payload Dispatcher services do not follow |
| all of the above requirements yet. |
| |
| Services that contain multiple sub-services |
| ------------------------------------------- |
| |
| It is possible that a single owning entity implements multiple sub-services. For |
| example, the Standard calls service handles ``0x84000000``-``0x8400FFFF`` and |
| ``0xC4000000``-``0xC400FFFF`` functions. Within that range, the `PSCI`_ service |
| handles the ``0x84000000``-``0x8400001F`` and ``0xC4000000``-``0xC400001F`` functions. |
| In that respect, `PSCI`_ is a 'sub-service' of the Standard calls service. In |
| future, there could be additional such sub-services in the Standard calls |
| service which perform independent functions. |
| |
| In this situation it may be valuable to introduce a second level framework to |
| enable independent implementation of sub-services. Such a framework might look |
| very similar to the current runtime services framework, but using a different |
| part of the SMC Function ID to identify the sub-service. TF-A does not provide |
| such a framework at present. |
| |
| Secure-EL1 Payload Dispatcher service (SPD) |
| ------------------------------------------- |
| |
| Services that handle SMC Functions targeting a Trusted OS, Trusted Application, |
| or other Secure-EL1 Payload are special. These services need to manage the |
| Secure-EL1 context, provide the *Secure Monitor* functionality of switching |
| between the normal and secure worlds, deliver SMC Calls through to Secure-EL1 |
| and generally manage the Secure-EL1 Payload through CPU power-state transitions. |
| |
| TODO: Provide details of the additional work required to implement a SPD and |
| the BL31 support for these services. Or a reference to the document that will |
| provide this information.... |
| |
| Additional References: |
| ---------------------- |
| |
| #. :ref:`ARM SiP Services <arm sip services>` |
| #. :ref:`Vendor Specific EL3 Monitor Service Calls` |
| |
| -------------- |
| |
| *Copyright (c) 2014-2024, Arm Limited and Contributors. All rights reserved.* |
| |
| .. _SMCCC: https://developer.arm.com/docs/den0028/latest |
| .. _PSCI: https://developer.arm.com/documentation/den0022/latest/ |
| .. _ARM SiP Services: arm-sip-service.rst |
| .. _Vendor Specific EL3 Monitor Service Calls: ven-el3-service.rst |