| /* |
| * Copyright (c) 2015-2023, ARM Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <assert.h> |
| |
| #include <drivers/clk.h> |
| #include <drivers/st/stm32_gpio.h> |
| #include <drivers/st/stm32_iwdg.h> |
| #include <lib/mmio.h> |
| #include <lib/xlat_tables/xlat_tables_v2.h> |
| #include <libfdt.h> |
| |
| #include <plat/common/platform.h> |
| #include <platform_def.h> |
| |
| #if STM32MP13 |
| #define TAMP_BOOT_MODE_BACKUP_REG_ID U(30) |
| #endif |
| #if STM32MP15 |
| #define TAMP_BOOT_MODE_BACKUP_REG_ID U(20) |
| #endif |
| |
| /* |
| * Backup register to store fwu update information. |
| * It should be writeable only by secure world, but also readable by non secure |
| * (so it should be in Zone 2). |
| */ |
| #define TAMP_BOOT_FWU_INFO_REG_ID U(10) |
| #define TAMP_BOOT_FWU_INFO_IDX_MSK GENMASK(3, 0) |
| #define TAMP_BOOT_FWU_INFO_IDX_OFF U(0) |
| #define TAMP_BOOT_FWU_INFO_CNT_MSK GENMASK(7, 4) |
| #define TAMP_BOOT_FWU_INFO_CNT_OFF U(4) |
| |
| #if defined(IMAGE_BL2) |
| #define MAP_SEC_SYSRAM MAP_REGION_FLAT(STM32MP_SYSRAM_BASE, \ |
| STM32MP_SYSRAM_SIZE, \ |
| MT_MEMORY | \ |
| MT_RW | \ |
| MT_SECURE | \ |
| MT_EXECUTE_NEVER) |
| #elif defined(IMAGE_BL32) |
| #define MAP_SEC_SYSRAM MAP_REGION_FLAT(STM32MP_SEC_SYSRAM_BASE, \ |
| STM32MP_SEC_SYSRAM_SIZE, \ |
| MT_MEMORY | \ |
| MT_RW | \ |
| MT_SECURE | \ |
| MT_EXECUTE_NEVER) |
| |
| /* Non-secure SYSRAM is used a uncached memory for SCMI message transfer */ |
| #define MAP_NS_SYSRAM MAP_REGION_FLAT(STM32MP_NS_SYSRAM_BASE, \ |
| STM32MP_NS_SYSRAM_SIZE, \ |
| MT_DEVICE | \ |
| MT_RW | \ |
| MT_NS | \ |
| MT_EXECUTE_NEVER) |
| #endif |
| |
| #if STM32MP13 |
| #define MAP_SRAM_ALL MAP_REGION_FLAT(SRAMS_BASE, \ |
| SRAMS_SIZE_2MB_ALIGNED, \ |
| MT_MEMORY | \ |
| MT_RW | \ |
| MT_SECURE | \ |
| MT_EXECUTE_NEVER) |
| #endif |
| |
| #define MAP_DEVICE1 MAP_REGION_FLAT(STM32MP1_DEVICE1_BASE, \ |
| STM32MP1_DEVICE1_SIZE, \ |
| MT_DEVICE | \ |
| MT_RW | \ |
| MT_SECURE | \ |
| MT_EXECUTE_NEVER) |
| |
| #define MAP_DEVICE2 MAP_REGION_FLAT(STM32MP1_DEVICE2_BASE, \ |
| STM32MP1_DEVICE2_SIZE, \ |
| MT_DEVICE | \ |
| MT_RW | \ |
| MT_SECURE | \ |
| MT_EXECUTE_NEVER) |
| |
| #if defined(IMAGE_BL2) |
| static const mmap_region_t stm32mp1_mmap[] = { |
| MAP_SEC_SYSRAM, |
| #if STM32MP13 |
| MAP_SRAM_ALL, |
| #endif |
| MAP_DEVICE1, |
| #if STM32MP_RAW_NAND |
| MAP_DEVICE2, |
| #endif |
| {0} |
| }; |
| #endif |
| #if defined(IMAGE_BL32) |
| static const mmap_region_t stm32mp1_mmap[] = { |
| MAP_SEC_SYSRAM, |
| MAP_NS_SYSRAM, |
| MAP_DEVICE1, |
| MAP_DEVICE2, |
| {0} |
| }; |
| #endif |
| |
| void configure_mmu(void) |
| { |
| mmap_add(stm32mp1_mmap); |
| init_xlat_tables(); |
| |
| enable_mmu_svc_mon(0); |
| } |
| |
| uintptr_t stm32_get_gpio_bank_base(unsigned int bank) |
| { |
| #if STM32MP13 |
| assert((GPIO_BANK_A == 0) && (bank <= GPIO_BANK_I)); |
| #endif |
| #if STM32MP15 |
| if (bank == GPIO_BANK_Z) { |
| return GPIOZ_BASE; |
| } |
| |
| assert((GPIO_BANK_A == 0) && (bank <= GPIO_BANK_K)); |
| #endif |
| |
| return GPIOA_BASE + (bank * GPIO_BANK_OFFSET); |
| } |
| |
| uint32_t stm32_get_gpio_bank_offset(unsigned int bank) |
| { |
| #if STM32MP13 |
| assert((GPIO_BANK_A == 0) && (bank <= GPIO_BANK_I)); |
| #endif |
| #if STM32MP15 |
| if (bank == GPIO_BANK_Z) { |
| return 0; |
| } |
| |
| assert((GPIO_BANK_A == 0) && (bank <= GPIO_BANK_K)); |
| #endif |
| |
| return bank * GPIO_BANK_OFFSET; |
| } |
| |
| bool stm32_gpio_is_secure_at_reset(unsigned int bank) |
| { |
| #if STM32MP13 |
| return true; |
| #endif |
| #if STM32MP15 |
| if (bank == GPIO_BANK_Z) { |
| return true; |
| } |
| |
| return false; |
| #endif |
| } |
| |
| unsigned long stm32_get_gpio_bank_clock(unsigned int bank) |
| { |
| #if STM32MP13 |
| assert((GPIO_BANK_A == 0) && (bank <= GPIO_BANK_I)); |
| #endif |
| #if STM32MP15 |
| if (bank == GPIO_BANK_Z) { |
| return GPIOZ; |
| } |
| |
| assert((GPIO_BANK_A == 0) && (bank <= GPIO_BANK_K)); |
| #endif |
| |
| return GPIOA + (bank - GPIO_BANK_A); |
| } |
| |
| int stm32_get_gpio_bank_pinctrl_node(void *fdt, unsigned int bank) |
| { |
| const char *node_compatible = NULL; |
| |
| switch (bank) { |
| case GPIO_BANK_A: |
| case GPIO_BANK_B: |
| case GPIO_BANK_C: |
| case GPIO_BANK_D: |
| case GPIO_BANK_E: |
| case GPIO_BANK_F: |
| case GPIO_BANK_G: |
| case GPIO_BANK_H: |
| case GPIO_BANK_I: |
| #if STM32MP13 |
| node_compatible = "st,stm32mp135-pinctrl"; |
| break; |
| #endif |
| #if STM32MP15 |
| case GPIO_BANK_J: |
| case GPIO_BANK_K: |
| node_compatible = "st,stm32mp157-pinctrl"; |
| break; |
| case GPIO_BANK_Z: |
| node_compatible = "st,stm32mp157-z-pinctrl"; |
| break; |
| #endif |
| default: |
| panic(); |
| } |
| |
| return fdt_node_offset_by_compatible(fdt, -1, node_compatible); |
| } |
| |
| #if STM32MP_UART_PROGRAMMER || !defined(IMAGE_BL2) |
| /* |
| * UART Management |
| */ |
| static const uintptr_t stm32mp1_uart_addresses[8] = { |
| USART1_BASE, |
| USART2_BASE, |
| USART3_BASE, |
| UART4_BASE, |
| UART5_BASE, |
| USART6_BASE, |
| UART7_BASE, |
| UART8_BASE, |
| }; |
| |
| uintptr_t get_uart_address(uint32_t instance_nb) |
| { |
| if ((instance_nb == 0U) || |
| (instance_nb > ARRAY_SIZE(stm32mp1_uart_addresses))) { |
| return 0U; |
| } |
| |
| return stm32mp1_uart_addresses[instance_nb - 1U]; |
| } |
| #endif |
| |
| #if STM32MP_USB_PROGRAMMER |
| struct gpio_bank_pin_list { |
| uint32_t bank; |
| uint32_t pin; |
| }; |
| |
| static const struct gpio_bank_pin_list gpio_list[] = { |
| { /* USART2_RX: GPIOA3 */ |
| .bank = 0U, |
| .pin = 3U, |
| }, |
| { /* USART3_RX: GPIOB12 */ |
| .bank = 1U, |
| .pin = 12U, |
| }, |
| { /* UART4_RX: GPIOB2 */ |
| .bank = 1U, |
| .pin = 2U, |
| }, |
| { /* UART5_RX: GPIOB4 */ |
| .bank = 1U, |
| .pin = 5U, |
| }, |
| { /* USART6_RX: GPIOC7 */ |
| .bank = 2U, |
| .pin = 7U, |
| }, |
| { /* UART7_RX: GPIOF6 */ |
| .bank = 5U, |
| .pin = 6U, |
| }, |
| { /* UART8_RX: GPIOE0 */ |
| .bank = 4U, |
| .pin = 0U, |
| }, |
| }; |
| |
| void stm32mp1_deconfigure_uart_pins(void) |
| { |
| size_t i; |
| |
| for (i = 0U; i < ARRAY_SIZE(gpio_list); i++) { |
| set_gpio_reset_cfg(gpio_list[i].bank, gpio_list[i].pin); |
| } |
| } |
| #endif |
| |
| uint32_t stm32mp_get_chip_version(void) |
| { |
| #if STM32MP13 |
| return stm32mp1_syscfg_get_chip_version(); |
| #endif |
| #if STM32MP15 |
| uint32_t version = 0U; |
| |
| if (stm32mp1_dbgmcu_get_chip_version(&version) < 0) { |
| INFO("Cannot get CPU version, debug disabled\n"); |
| return 0U; |
| } |
| |
| return version; |
| #endif |
| } |
| |
| uint32_t stm32mp_get_chip_dev_id(void) |
| { |
| #if STM32MP13 |
| return stm32mp1_syscfg_get_chip_dev_id(); |
| #endif |
| #if STM32MP15 |
| uint32_t dev_id; |
| |
| if (stm32mp1_dbgmcu_get_chip_dev_id(&dev_id) < 0) { |
| INFO("Use default chip ID, debug disabled\n"); |
| dev_id = STM32MP1_CHIP_ID; |
| } |
| |
| return dev_id; |
| #endif |
| } |
| |
| static uint32_t get_part_number(void) |
| { |
| static uint32_t part_number; |
| |
| if (part_number != 0U) { |
| return part_number; |
| } |
| |
| if (stm32_get_otp_value(PART_NUMBER_OTP, &part_number) != 0) { |
| panic(); |
| } |
| |
| part_number = (part_number & PART_NUMBER_OTP_PART_MASK) >> |
| PART_NUMBER_OTP_PART_SHIFT; |
| |
| part_number |= stm32mp_get_chip_dev_id() << 16; |
| |
| return part_number; |
| } |
| |
| #if STM32MP15 |
| static uint32_t get_cpu_package(void) |
| { |
| uint32_t package; |
| |
| if (stm32_get_otp_value(PACKAGE_OTP, &package) != 0) { |
| panic(); |
| } |
| |
| package = (package & PACKAGE_OTP_PKG_MASK) >> |
| PACKAGE_OTP_PKG_SHIFT; |
| |
| return package; |
| } |
| #endif |
| |
| void stm32mp_get_soc_name(char name[STM32_SOC_NAME_SIZE]) |
| { |
| const char *cpu_s, *cpu_r, *pkg; |
| |
| /* MPUs Part Numbers */ |
| switch (get_part_number()) { |
| #if STM32MP13 |
| case STM32MP135F_PART_NB: |
| cpu_s = "135F"; |
| break; |
| case STM32MP135D_PART_NB: |
| cpu_s = "135D"; |
| break; |
| case STM32MP135C_PART_NB: |
| cpu_s = "135C"; |
| break; |
| case STM32MP135A_PART_NB: |
| cpu_s = "135A"; |
| break; |
| case STM32MP133F_PART_NB: |
| cpu_s = "133F"; |
| break; |
| case STM32MP133D_PART_NB: |
| cpu_s = "133D"; |
| break; |
| case STM32MP133C_PART_NB: |
| cpu_s = "133C"; |
| break; |
| case STM32MP133A_PART_NB: |
| cpu_s = "133A"; |
| break; |
| case STM32MP131F_PART_NB: |
| cpu_s = "131F"; |
| break; |
| case STM32MP131D_PART_NB: |
| cpu_s = "131D"; |
| break; |
| case STM32MP131C_PART_NB: |
| cpu_s = "131C"; |
| break; |
| case STM32MP131A_PART_NB: |
| cpu_s = "131A"; |
| break; |
| #endif |
| #if STM32MP15 |
| case STM32MP157C_PART_NB: |
| cpu_s = "157C"; |
| break; |
| case STM32MP157A_PART_NB: |
| cpu_s = "157A"; |
| break; |
| case STM32MP153C_PART_NB: |
| cpu_s = "153C"; |
| break; |
| case STM32MP153A_PART_NB: |
| cpu_s = "153A"; |
| break; |
| case STM32MP151C_PART_NB: |
| cpu_s = "151C"; |
| break; |
| case STM32MP151A_PART_NB: |
| cpu_s = "151A"; |
| break; |
| case STM32MP157F_PART_NB: |
| cpu_s = "157F"; |
| break; |
| case STM32MP157D_PART_NB: |
| cpu_s = "157D"; |
| break; |
| case STM32MP153F_PART_NB: |
| cpu_s = "153F"; |
| break; |
| case STM32MP153D_PART_NB: |
| cpu_s = "153D"; |
| break; |
| case STM32MP151F_PART_NB: |
| cpu_s = "151F"; |
| break; |
| case STM32MP151D_PART_NB: |
| cpu_s = "151D"; |
| break; |
| #endif |
| default: |
| cpu_s = "????"; |
| break; |
| } |
| |
| /* Package */ |
| #if STM32MP13 |
| /* On STM32MP13, package is not present in OTP */ |
| pkg = ""; |
| #endif |
| #if STM32MP15 |
| switch (get_cpu_package()) { |
| case PKG_AA_LFBGA448: |
| pkg = "AA"; |
| break; |
| case PKG_AB_LFBGA354: |
| pkg = "AB"; |
| break; |
| case PKG_AC_TFBGA361: |
| pkg = "AC"; |
| break; |
| case PKG_AD_TFBGA257: |
| pkg = "AD"; |
| break; |
| default: |
| pkg = "??"; |
| break; |
| } |
| #endif |
| |
| /* REVISION */ |
| switch (stm32mp_get_chip_version()) { |
| case STM32MP1_REV_B: |
| cpu_r = "B"; |
| break; |
| #if STM32MP13 |
| case STM32MP1_REV_Y: |
| cpu_r = "Y"; |
| break; |
| #endif |
| case STM32MP1_REV_Z: |
| cpu_r = "Z"; |
| break; |
| default: |
| cpu_r = "?"; |
| break; |
| } |
| |
| snprintf(name, STM32_SOC_NAME_SIZE, |
| "STM32MP%s%s Rev.%s", cpu_s, pkg, cpu_r); |
| } |
| |
| void stm32mp_print_cpuinfo(void) |
| { |
| char name[STM32_SOC_NAME_SIZE]; |
| |
| stm32mp_get_soc_name(name); |
| NOTICE("CPU: %s\n", name); |
| } |
| |
| void stm32mp_print_boardinfo(void) |
| { |
| uint32_t board_id = 0U; |
| |
| if (stm32_get_otp_value(BOARD_ID_OTP, &board_id) != 0) { |
| return; |
| } |
| |
| if (board_id != 0U) { |
| stm32_display_board_info(board_id); |
| } |
| } |
| |
| /* Return true when SoC provides a single Cortex-A7 core, and false otherwise */ |
| bool stm32mp_is_single_core(void) |
| { |
| #if STM32MP13 |
| return true; |
| #endif |
| #if STM32MP15 |
| bool single_core = false; |
| |
| switch (get_part_number()) { |
| case STM32MP151A_PART_NB: |
| case STM32MP151C_PART_NB: |
| case STM32MP151D_PART_NB: |
| case STM32MP151F_PART_NB: |
| single_core = true; |
| break; |
| default: |
| break; |
| } |
| |
| return single_core; |
| #endif |
| } |
| |
| /* Return true when device is in closed state */ |
| bool stm32mp_is_closed_device(void) |
| { |
| uint32_t value; |
| |
| if (stm32_get_otp_value(CFG0_OTP, &value) != 0) { |
| return true; |
| } |
| |
| #if STM32MP13 |
| value = (value & CFG0_OTP_MODE_MASK) >> CFG0_OTP_MODE_SHIFT; |
| |
| switch (value) { |
| case CFG0_OPEN_DEVICE: |
| return false; |
| case CFG0_CLOSED_DEVICE: |
| case CFG0_CLOSED_DEVICE_NO_BOUNDARY_SCAN: |
| case CFG0_CLOSED_DEVICE_NO_JTAG: |
| return true; |
| default: |
| panic(); |
| } |
| #endif |
| #if STM32MP15 |
| return (value & CFG0_CLOSED_DEVICE) == CFG0_CLOSED_DEVICE; |
| #endif |
| } |
| |
| /* Return true when device supports secure boot */ |
| bool stm32mp_is_auth_supported(void) |
| { |
| bool supported = false; |
| |
| switch (get_part_number()) { |
| #if STM32MP13 |
| case STM32MP131C_PART_NB: |
| case STM32MP131F_PART_NB: |
| case STM32MP133C_PART_NB: |
| case STM32MP133F_PART_NB: |
| case STM32MP135C_PART_NB: |
| case STM32MP135F_PART_NB: |
| #endif |
| #if STM32MP15 |
| case STM32MP151C_PART_NB: |
| case STM32MP151F_PART_NB: |
| case STM32MP153C_PART_NB: |
| case STM32MP153F_PART_NB: |
| case STM32MP157C_PART_NB: |
| case STM32MP157F_PART_NB: |
| #endif |
| supported = true; |
| break; |
| default: |
| break; |
| } |
| |
| return supported; |
| } |
| |
| uint32_t stm32_iwdg_get_instance(uintptr_t base) |
| { |
| switch (base) { |
| case IWDG1_BASE: |
| return IWDG1_INST; |
| case IWDG2_BASE: |
| return IWDG2_INST; |
| default: |
| panic(); |
| } |
| } |
| |
| uint32_t stm32_iwdg_get_otp_config(uint32_t iwdg_inst) |
| { |
| uint32_t iwdg_cfg = 0U; |
| uint32_t otp_value; |
| |
| if (stm32_get_otp_value(HW2_OTP, &otp_value) != 0) { |
| panic(); |
| } |
| |
| if ((otp_value & BIT(iwdg_inst + HW2_OTP_IWDG_HW_POS)) != 0U) { |
| iwdg_cfg |= IWDG_HW_ENABLED; |
| } |
| |
| if ((otp_value & BIT(iwdg_inst + HW2_OTP_IWDG_FZ_STOP_POS)) != 0U) { |
| iwdg_cfg |= IWDG_DISABLE_ON_STOP; |
| } |
| |
| if ((otp_value & BIT(iwdg_inst + HW2_OTP_IWDG_FZ_STANDBY_POS)) != 0U) { |
| iwdg_cfg |= IWDG_DISABLE_ON_STANDBY; |
| } |
| |
| return iwdg_cfg; |
| } |
| |
| #if defined(IMAGE_BL2) |
| uint32_t stm32_iwdg_shadow_update(uint32_t iwdg_inst, uint32_t flags) |
| { |
| uint32_t otp_value; |
| uint32_t otp; |
| uint32_t result; |
| |
| if (stm32_get_otp_index(HW2_OTP, &otp, NULL) != 0) { |
| panic(); |
| } |
| |
| if (stm32_get_otp_value(HW2_OTP, &otp_value) != 0) { |
| panic(); |
| } |
| |
| if ((flags & IWDG_DISABLE_ON_STOP) != 0) { |
| otp_value |= BIT(iwdg_inst + HW2_OTP_IWDG_FZ_STOP_POS); |
| } |
| |
| if ((flags & IWDG_DISABLE_ON_STANDBY) != 0) { |
| otp_value |= BIT(iwdg_inst + HW2_OTP_IWDG_FZ_STANDBY_POS); |
| } |
| |
| result = bsec_write_otp(otp_value, otp); |
| if (result != BSEC_OK) { |
| return result; |
| } |
| |
| /* Sticky lock OTP_IWDG (read and write) */ |
| if ((bsec_set_sr_lock(otp) != BSEC_OK) || |
| (bsec_set_sw_lock(otp) != BSEC_OK)) { |
| return BSEC_LOCK_FAIL; |
| } |
| |
| return BSEC_OK; |
| } |
| #endif |
| |
| uintptr_t stm32_get_bkpr_boot_mode_addr(void) |
| { |
| return tamp_bkpr(TAMP_BOOT_MODE_BACKUP_REG_ID); |
| } |
| |
| #if PSA_FWU_SUPPORT |
| void stm32mp1_fwu_set_boot_idx(void) |
| { |
| clk_enable(RTCAPB); |
| mmio_clrsetbits_32(tamp_bkpr(TAMP_BOOT_FWU_INFO_REG_ID), |
| TAMP_BOOT_FWU_INFO_IDX_MSK, |
| (plat_fwu_get_boot_idx() << TAMP_BOOT_FWU_INFO_IDX_OFF) & |
| TAMP_BOOT_FWU_INFO_IDX_MSK); |
| clk_disable(RTCAPB); |
| } |
| |
| uint32_t stm32_get_and_dec_fwu_trial_boot_cnt(void) |
| { |
| uintptr_t bkpr_fwu_cnt = tamp_bkpr(TAMP_BOOT_FWU_INFO_REG_ID); |
| uint32_t try_cnt; |
| |
| clk_enable(RTCAPB); |
| try_cnt = (mmio_read_32(bkpr_fwu_cnt) & TAMP_BOOT_FWU_INFO_CNT_MSK) >> |
| TAMP_BOOT_FWU_INFO_CNT_OFF; |
| |
| assert(try_cnt <= FWU_MAX_TRIAL_REBOOT); |
| |
| if (try_cnt != 0U) { |
| mmio_clrsetbits_32(bkpr_fwu_cnt, TAMP_BOOT_FWU_INFO_CNT_MSK, |
| (try_cnt - 1U) << TAMP_BOOT_FWU_INFO_CNT_OFF); |
| } |
| clk_disable(RTCAPB); |
| |
| return try_cnt; |
| } |
| |
| void stm32_set_max_fwu_trial_boot_cnt(void) |
| { |
| uintptr_t bkpr_fwu_cnt = tamp_bkpr(TAMP_BOOT_FWU_INFO_REG_ID); |
| |
| clk_enable(RTCAPB); |
| mmio_clrsetbits_32(bkpr_fwu_cnt, TAMP_BOOT_FWU_INFO_CNT_MSK, |
| (FWU_MAX_TRIAL_REBOOT << TAMP_BOOT_FWU_INFO_CNT_OFF) & |
| TAMP_BOOT_FWU_INFO_CNT_MSK); |
| clk_disable(RTCAPB); |
| } |
| #endif /* PSA_FWU_SUPPORT */ |