| /* |
| * Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <assert.h> |
| |
| #include <platform_def.h> |
| |
| #include <arch_helpers.h> |
| #include <common/bl_common.h> |
| #include <common/debug.h> |
| #include <context.h> |
| #include <lib/el3_runtime/context_mgmt.h> |
| #include <lib/mmio.h> |
| #include <lib/psci/psci.h> |
| #include <plat/common/platform.h> |
| |
| #include "hi3798cv200.h" |
| #include "plat_private.h" |
| |
| #define REG_PERI_CPU_RVBARADDR 0xF8A80034 |
| #define REG_PERI_CPU_AARCH_MODE 0xF8A80030 |
| |
| #define REG_CPU_LP_CPU_SW_BEGIN 10 |
| #define CPU_REG_COREPO_SRST 12 |
| #define CPU_REG_CORE_SRST 8 |
| |
| static void poplar_cpu_standby(plat_local_state_t cpu_state) |
| { |
| dsb(); |
| wfi(); |
| } |
| |
| static int poplar_pwr_domain_on(u_register_t mpidr) |
| { |
| unsigned int cpu = plat_core_pos_by_mpidr(mpidr); |
| unsigned int regval, regval_bak; |
| |
| /* Select 400MHz before start slave cores */ |
| regval_bak = mmio_read_32((uintptr_t)(REG_BASE_CRG + REG_CPU_LP)); |
| mmio_write_32((uintptr_t)(REG_BASE_CRG + REG_CPU_LP), 0x206); |
| mmio_write_32((uintptr_t)(REG_BASE_CRG + REG_CPU_LP), 0x606); |
| |
| /* Clear the slave cpu arm_por_srst_req reset */ |
| regval = mmio_read_32((uintptr_t)(REG_BASE_CRG + REG_CPU_RST)); |
| regval &= ~(1 << (cpu + CPU_REG_COREPO_SRST)); |
| mmio_write_32((uintptr_t)(REG_BASE_CRG + REG_CPU_RST), regval); |
| |
| /* Clear the slave cpu reset */ |
| regval = mmio_read_32((uintptr_t)(REG_BASE_CRG + REG_CPU_RST)); |
| regval &= ~(1 << (cpu + CPU_REG_CORE_SRST)); |
| mmio_write_32((uintptr_t)(REG_BASE_CRG + REG_CPU_RST), regval); |
| |
| /* Restore cpu frequency */ |
| regval = regval_bak & (~(1 << REG_CPU_LP_CPU_SW_BEGIN)); |
| mmio_write_32((uintptr_t)(REG_BASE_CRG + REG_CPU_LP), regval); |
| mmio_write_32((uintptr_t)(REG_BASE_CRG + REG_CPU_LP), regval_bak); |
| |
| return PSCI_E_SUCCESS; |
| } |
| |
| static void poplar_pwr_domain_off(const psci_power_state_t *target_state) |
| { |
| assert(0); |
| } |
| |
| static void poplar_pwr_domain_suspend(const psci_power_state_t *target_state) |
| { |
| assert(0); |
| } |
| |
| static void poplar_pwr_domain_on_finish(const psci_power_state_t *target_state) |
| { |
| assert(target_state->pwr_domain_state[MPIDR_AFFLVL0] == |
| PLAT_MAX_OFF_STATE); |
| |
| /* Enable the gic cpu interface */ |
| poplar_gic_pcpu_init(); |
| |
| /* Program the gic per-cpu distributor or re-distributor interface */ |
| poplar_gic_cpuif_enable(); |
| } |
| |
| static void poplar_pwr_domain_suspend_finish( |
| const psci_power_state_t *target_state) |
| { |
| assert(0); |
| } |
| |
| static void __dead2 poplar_system_off(void) |
| { |
| ERROR("Poplar System Off: operation not handled.\n"); |
| panic(); |
| } |
| |
| static void __dead2 poplar_system_reset(void) |
| { |
| mmio_write_32((uintptr_t)(HISI_WDG0_BASE + 0xc00), 0x1ACCE551); |
| mmio_write_32((uintptr_t)(HISI_WDG0_BASE + 0x0), 0x00000100); |
| mmio_write_32((uintptr_t)(HISI_WDG0_BASE + 0x8), 0x00000003); |
| |
| wfi(); |
| ERROR("Poplar System Reset: operation not handled.\n"); |
| panic(); |
| } |
| |
| static int32_t poplar_validate_power_state(unsigned int power_state, |
| psci_power_state_t *req_state) |
| { |
| VERBOSE("%s: power_state: 0x%x\n", __func__, power_state); |
| |
| int pstate = psci_get_pstate_type(power_state); |
| |
| assert(req_state); |
| |
| /* Sanity check the requested state */ |
| if (pstate == PSTATE_TYPE_STANDBY) |
| req_state->pwr_domain_state[MPIDR_AFFLVL0] = PLAT_MAX_RET_STATE; |
| else |
| req_state->pwr_domain_state[MPIDR_AFFLVL0] = PLAT_MAX_OFF_STATE; |
| |
| /* We expect the 'state id' to be zero */ |
| if (psci_get_pstate_id(power_state)) |
| return PSCI_E_INVALID_PARAMS; |
| |
| return PSCI_E_SUCCESS; |
| } |
| |
| static int poplar_validate_ns_entrypoint(uintptr_t entrypoint) |
| { |
| /* |
| * Check if the non secure entrypoint lies within the non |
| * secure DRAM. |
| */ |
| if ((entrypoint >= DDR_BASE) && (entrypoint < (DDR_BASE + DDR_SIZE))) |
| return PSCI_E_SUCCESS; |
| |
| return PSCI_E_INVALID_ADDRESS; |
| } |
| |
| static void poplar_get_sys_suspend_power_state(psci_power_state_t *req_state) |
| { |
| int i; |
| |
| for (i = MPIDR_AFFLVL0; i <= PLAT_MAX_PWR_LVL; i++) |
| req_state->pwr_domain_state[i] = PLAT_MAX_OFF_STATE; |
| } |
| |
| static const plat_psci_ops_t poplar_plat_psci_ops = { |
| .cpu_standby = poplar_cpu_standby, |
| .pwr_domain_on = poplar_pwr_domain_on, |
| .pwr_domain_off = poplar_pwr_domain_off, |
| .pwr_domain_suspend = poplar_pwr_domain_suspend, |
| .pwr_domain_on_finish = poplar_pwr_domain_on_finish, |
| .pwr_domain_suspend_finish = poplar_pwr_domain_suspend_finish, |
| .system_off = poplar_system_off, |
| .system_reset = poplar_system_reset, |
| .validate_power_state = poplar_validate_power_state, |
| .validate_ns_entrypoint = poplar_validate_ns_entrypoint, |
| .get_sys_suspend_power_state = poplar_get_sys_suspend_power_state, |
| }; |
| |
| int plat_setup_psci_ops(uintptr_t sec_entrypoint, |
| const plat_psci_ops_t **psci_ops) |
| { |
| *psci_ops = &poplar_plat_psci_ops; |
| |
| mmio_write_32((uintptr_t)REG_PERI_CPU_AARCH_MODE, 0xF); |
| mmio_write_32((uintptr_t)REG_PERI_CPU_RVBARADDR, sec_entrypoint); |
| return 0; |
| } |