blob: dac025356d2861b68fc31681965a90a2700955d1 [file] [log] [blame]
/*
* Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
* Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <assert.h>
#include <bl31/bl31.h>
#include <common/debug.h>
#include <common/desc_image_load.h>
#include <drivers/console.h>
#include <drivers/generic_delay_timer.h>
#include <lib/bl_aux_params/bl_aux_params.h>
#include <lib/coreboot.h>
#include <lib/spinlock.h>
#include <platform.h>
#include <qti_interrupt_svc.h>
#include <qti_plat.h>
#include <qti_uart_console.h>
#include <qtiseclib_interface.h>
/*
* Placeholder variables for copying the arguments that have been passed to
* BL31 from BL2.
*/
static entry_point_info_t bl33_image_ep_info;
/*
* Variable to hold counter frequency for the CPU's generic timer. In this
* platform coreboot image configure counter frequency for boot core before
* reaching TF-A.
*/
static uint64_t g_qti_cpu_cntfrq;
/*
* Variable to hold bl31 cold boot status. Default value 0x0 means yet to boot.
* Any other value means cold booted.
*/
uint32_t g_qti_bl31_cold_booted;
/*******************************************************************************
* Perform any BL31 early platform setup common to ARM standard platforms.
* Here is an opportunity to copy parameters passed by the calling EL (S-EL1
* in BL2 & S-EL3 in BL1) before they are lost (potentially). This needs to be
* done before the MMU is initialized so that the memory layout can be used
* while creating page tables. BL2 has flushed this information to memory, so
* we are guaranteed to pick up good data.
******************************************************************************/
void bl31_early_platform_setup(u_register_t from_bl2,
u_register_t plat_params_from_bl2)
{
g_qti_cpu_cntfrq = read_cntfrq_el0();
bl_aux_params_parse(plat_params_from_bl2, NULL);
#if COREBOOT
if (coreboot_serial.baseaddr != 0) {
static console_t g_qti_console_uart;
qti_console_uart_register(&g_qti_console_uart,
coreboot_serial.baseaddr);
}
#endif
/*
* Tell BL31 where the non-trusted software image
* is located and the entry state information
*/
bl31_params_parse_helper(from_bl2, NULL, &bl33_image_ep_info);
}
void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
u_register_t arg2, u_register_t arg3)
{
bl31_early_platform_setup(arg0, arg1);
}
/*******************************************************************************
* Perform the very early platform specific architectural setup here. At the
* moment this only intializes the mmu in a quick and dirty way.
******************************************************************************/
void bl31_plat_arch_setup(void)
{
qti_setup_page_tables(
BL31_START,
BL31_END-BL31_START,
BL_CODE_BASE,
BL_CODE_END,
BL_RO_DATA_BASE,
BL_RO_DATA_END
);
enable_mmu_el3(0);
}
/*******************************************************************************
* Perform any BL31 platform setup common to ARM standard platforms
******************************************************************************/
void bl31_platform_setup(void)
{
generic_delay_timer_init();
/* Initialize the GIC driver, CPU and distributor interfaces */
plat_qti_gic_driver_init();
plat_qti_gic_init();
qti_interrupt_svc_init();
qtiseclib_bl31_platform_setup();
/* set boot state to cold boot complete. */
g_qti_bl31_cold_booted = 0x1;
}
/*******************************************************************************
* Return a pointer to the 'entry_point_info' structure of the next image for the
* security state specified. BL33 corresponds to the non-secure image type
* while BL32 corresponds to the secure image type. A NULL pointer is returned
* if the image does not exist.
******************************************************************************/
entry_point_info_t *bl31_plat_get_next_image_ep_info(uint32_t type)
{
/* QTI platform don't have BL32 implementation. */
assert(type == NON_SECURE);
assert(bl33_image_ep_info.h.type == PARAM_EP);
assert(bl33_image_ep_info.h.attr == NON_SECURE);
/*
* None of the images on the platforms can have 0x0
* as the entrypoint.
*/
if (bl33_image_ep_info.pc) {
return &bl33_image_ep_info;
} else {
return NULL;
}
}
/*******************************************************************************
* This function is used by the architecture setup code to retrieve the counter
* frequency for the CPU's generic timer. This value will be programmed into the
* CNTFRQ_EL0 register. In Arm standard platforms, it returns the base frequency
* of the system counter, which is retrieved from the first entry in the
* frequency modes table. This will be used later in warm boot (psci_arch_setup)
* of CPUs to set when CPU frequency.
******************************************************************************/
unsigned int plat_get_syscnt_freq2(void)
{
assert(g_qti_cpu_cntfrq != 0);
return g_qti_cpu_cntfrq;
}