| /* |
| * Copyright (c) 2014-2017, ARM Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #ifndef __PLATFORM_DEF_H__ |
| #define __PLATFORM_DEF_H__ |
| |
| #include <arm_def.h> |
| #include <board_arm_def.h> |
| #include <common_def.h> |
| #include <tzc400.h> |
| #include <utils_def.h> |
| #include <v2m_def.h> |
| #include "../fvp_def.h" |
| |
| /* Required platform porting definitions */ |
| #define PLATFORM_CORE_COUNT \ |
| (FVP_CLUSTER_COUNT * FVP_MAX_CPUS_PER_CLUSTER * FVP_MAX_PE_PER_CPU) |
| |
| #define PLAT_NUM_PWR_DOMAINS (FVP_CLUSTER_COUNT + \ |
| PLATFORM_CORE_COUNT) |
| |
| #define PLAT_MAX_PWR_LVL ARM_PWR_LVL1 |
| |
| /* |
| * Other platform porting definitions are provided by included headers |
| */ |
| |
| /* |
| * Required ARM standard platform porting definitions |
| */ |
| #define PLAT_ARM_CLUSTER_COUNT FVP_CLUSTER_COUNT |
| |
| #define PLAT_ARM_TRUSTED_ROM_BASE 0x00000000 |
| #define PLAT_ARM_TRUSTED_ROM_SIZE 0x04000000 /* 64 MB */ |
| |
| #define PLAT_ARM_TRUSTED_DRAM_BASE 0x06000000 |
| #define PLAT_ARM_TRUSTED_DRAM_SIZE 0x02000000 /* 32 MB */ |
| |
| /* No SCP in FVP */ |
| #define PLAT_ARM_SCP_TZC_DRAM1_SIZE ULL(0x0) |
| |
| #define PLAT_ARM_DRAM2_SIZE ULL(0x780000000) |
| |
| /* |
| * Load address of BL33 for this platform port |
| */ |
| #define PLAT_ARM_NS_IMAGE_OFFSET (ARM_DRAM1_BASE + 0x8000000) |
| |
| |
| /* |
| * PL011 related constants |
| */ |
| #define PLAT_ARM_BOOT_UART_BASE V2M_IOFPGA_UART0_BASE |
| #define PLAT_ARM_BOOT_UART_CLK_IN_HZ V2M_IOFPGA_UART0_CLK_IN_HZ |
| |
| #define PLAT_ARM_BL31_RUN_UART_BASE V2M_IOFPGA_UART1_BASE |
| #define PLAT_ARM_BL31_RUN_UART_CLK_IN_HZ V2M_IOFPGA_UART1_CLK_IN_HZ |
| |
| #define PLAT_ARM_SP_MIN_RUN_UART_BASE V2M_IOFPGA_UART1_BASE |
| #define PLAT_ARM_SP_MIN_RUN_UART_CLK_IN_HZ V2M_IOFPGA_UART1_CLK_IN_HZ |
| |
| #define PLAT_ARM_CRASH_UART_BASE PLAT_ARM_BL31_RUN_UART_BASE |
| #define PLAT_ARM_CRASH_UART_CLK_IN_HZ PLAT_ARM_BL31_RUN_UART_CLK_IN_HZ |
| |
| #define PLAT_ARM_TSP_UART_BASE V2M_IOFPGA_UART2_BASE |
| #define PLAT_ARM_TSP_UART_CLK_IN_HZ V2M_IOFPGA_UART2_CLK_IN_HZ |
| |
| #define PLAT_FVP_SMMUV3_BASE 0x2b400000 |
| |
| /* CCI related constants */ |
| #define PLAT_FVP_CCI400_BASE 0x2c090000 |
| #define PLAT_FVP_CCI400_CLUS0_SL_PORT 3 |
| #define PLAT_FVP_CCI400_CLUS1_SL_PORT 4 |
| |
| /* CCI-500/CCI-550 on Base platform */ |
| #define PLAT_FVP_CCI5XX_BASE 0x2a000000 |
| #define PLAT_FVP_CCI5XX_CLUS0_SL_PORT 5 |
| #define PLAT_FVP_CCI5XX_CLUS1_SL_PORT 6 |
| |
| /* CCN related constants. Only CCN 502 is currently supported */ |
| #define PLAT_ARM_CCN_BASE 0x2e000000 |
| #define PLAT_ARM_CLUSTER_TO_CCN_ID_MAP 1, 5, 7, 11 |
| |
| /* System timer related constants */ |
| #define PLAT_ARM_NSTIMER_FRAME_ID 1 |
| |
| /* Mailbox base address */ |
| #define PLAT_ARM_TRUSTED_MAILBOX_BASE ARM_TRUSTED_SRAM_BASE |
| |
| |
| /* TrustZone controller related constants |
| * |
| * Currently only filters 0 and 2 are connected on Base FVP. |
| * Filter 0 : CPU clusters (no access to DRAM by default) |
| * Filter 1 : not connected |
| * Filter 2 : LCDs (access to VRAM allowed by default) |
| * Filter 3 : not connected |
| * Programming unconnected filters will have no effect at the |
| * moment. These filter could, however, be connected in future. |
| * So care should be taken not to configure the unused filters. |
| * |
| * Allow only non-secure access to all DRAM to supported devices. |
| * Give access to the CPUs and Virtio. Some devices |
| * would normally use the default ID so allow that too. |
| */ |
| #define PLAT_ARM_TZC_BASE 0x2a4a0000 |
| #define PLAT_ARM_TZC_FILTERS TZC_400_REGION_ATTR_FILTER_BIT(0) |
| |
| #define PLAT_ARM_TZC_NS_DEV_ACCESS ( \ |
| TZC_REGION_ACCESS_RDWR(FVP_NSAID_DEFAULT) | \ |
| TZC_REGION_ACCESS_RDWR(FVP_NSAID_PCI) | \ |
| TZC_REGION_ACCESS_RDWR(FVP_NSAID_AP) | \ |
| TZC_REGION_ACCESS_RDWR(FVP_NSAID_VIRTIO) | \ |
| TZC_REGION_ACCESS_RDWR(FVP_NSAID_VIRTIO_OLD)) |
| |
| /* |
| * GIC related constants to cater for both GICv2 and GICv3 instances of an |
| * FVP. They could be overriden at runtime in case the FVP implements the legacy |
| * VE memory map. |
| */ |
| #define PLAT_ARM_GICD_BASE BASE_GICD_BASE |
| #define PLAT_ARM_GICR_BASE BASE_GICR_BASE |
| #define PLAT_ARM_GICC_BASE BASE_GICC_BASE |
| |
| /* |
| * Define a list of Group 1 Secure and Group 0 interrupts as per GICv3 |
| * terminology. On a GICv2 system or mode, the lists will be merged and treated |
| * as Group 0 interrupts. |
| */ |
| #define PLAT_ARM_G1S_IRQS ARM_G1S_IRQS, \ |
| FVP_IRQ_TZ_WDOG, \ |
| FVP_IRQ_SEC_SYS_TIMER |
| |
| #define PLAT_ARM_G0_IRQS ARM_G0_IRQS |
| |
| #define PLAT_ARM_G1S_IRQ_PROPS(grp) \ |
| ARM_G1S_IRQ_PROPS(grp), \ |
| INTR_PROP_DESC(FVP_IRQ_TZ_WDOG, GIC_HIGHEST_SEC_PRIORITY, grp, \ |
| GIC_INTR_CFG_LEVEL), \ |
| INTR_PROP_DESC(FVP_IRQ_SEC_SYS_TIMER, GIC_HIGHEST_SEC_PRIORITY, grp, \ |
| GIC_INTR_CFG_LEVEL) |
| |
| #define PLAT_ARM_G0_IRQ_PROPS(grp) ARM_G0_IRQ_PROPS(grp) |
| |
| #endif /* __PLATFORM_DEF_H__ */ |