| /* |
| * Copyright (c) 2016-2021, ARM Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #ifndef EL3_COMMON_MACROS_S |
| #define EL3_COMMON_MACROS_S |
| |
| #include <arch.h> |
| #include <asm_macros.S> |
| #include <assert_macros.S> |
| #include <lib/xlat_tables/xlat_tables_defs.h> |
| |
| #define PAGE_START_MASK ~(PAGE_SIZE_MASK) |
| |
| /* |
| * Helper macro to initialise EL3 registers we care about. |
| */ |
| .macro el3_arch_init_common |
| /* --------------------------------------------------------------------- |
| * SCTLR has already been initialised - read current value before |
| * modifying. |
| * |
| * SCTLR.I: Enable the instruction cache. |
| * |
| * SCTLR.A: Enable Alignment fault checking. All instructions that load |
| * or store one or more registers have an alignment check that the |
| * address being accessed is aligned to the size of the data element(s) |
| * being accessed. |
| * --------------------------------------------------------------------- |
| */ |
| ldr r1, =(SCTLR_I_BIT | SCTLR_A_BIT) |
| ldcopr r0, SCTLR |
| orr r0, r0, r1 |
| stcopr r0, SCTLR |
| isb |
| |
| /* --------------------------------------------------------------------- |
| * Initialise SCR, setting all fields rather than relying on the hw. |
| * |
| * SCR.SIF: Enabled so that Secure state instruction fetches from |
| * Non-secure memory are not permitted. |
| * --------------------------------------------------------------------- |
| */ |
| ldr r0, =(SCR_RESET_VAL | SCR_SIF_BIT) |
| stcopr r0, SCR |
| |
| /* ----------------------------------------------------- |
| * Enable the Asynchronous data abort now that the |
| * exception vectors have been setup. |
| * ----------------------------------------------------- |
| */ |
| cpsie a |
| isb |
| |
| /* --------------------------------------------------------------------- |
| * Initialise NSACR, setting all the fields, except for the |
| * IMPLEMENTATION DEFINED field, rather than relying on the hw. Some |
| * fields are architecturally UNKNOWN on reset. |
| * |
| * NSACR_ENABLE_FP_ACCESS: Represents NSACR.cp11 and NSACR.cp10. The |
| * cp11 field is ignored, but is set to same value as cp10. The cp10 |
| * field is set to allow access to Advanced SIMD and floating point |
| * features from both Security states. |
| * |
| * NSACR.NSTRCDIS: When system register trace implemented, Set to one |
| * so that NS System register accesses to all implemented trace |
| * registers are disabled. |
| * When system register trace is not implemented, this bit is RES0 and |
| * hence set to zero. |
| * --------------------------------------------------------------------- |
| */ |
| ldcopr r0, NSACR |
| and r0, r0, #NSACR_IMP_DEF_MASK |
| orr r0, r0, #(NSACR_RESET_VAL | NSACR_ENABLE_FP_ACCESS) |
| ldcopr r1, ID_DFR0 |
| ubfx r1, r1, #ID_DFR0_COPTRC_SHIFT, #ID_DFR0_COPTRC_LENGTH |
| cmp r1, #ID_DFR0_COPTRC_SUPPORTED |
| bne 1f |
| orr r0, r0, #NSTRCDIS_BIT |
| 1: |
| stcopr r0, NSACR |
| isb |
| |
| /* --------------------------------------------------------------------- |
| * Initialise CPACR, setting all fields rather than relying on hw. Some |
| * fields are architecturally UNKNOWN on reset. |
| * |
| * CPACR.TRCDIS: Trap control for PL0 and PL1 System register accesses |
| * to trace registers. Set to zero to allow access. |
| * |
| * CPACR_ENABLE_FP_ACCESS: Represents CPACR.cp11 and CPACR.cp10. The |
| * cp11 field is ignored, but is set to same value as cp10. The cp10 |
| * field is set to allow full access from PL0 and PL1 to floating-point |
| * and Advanced SIMD features. |
| * --------------------------------------------------------------------- |
| */ |
| ldr r0, =((CPACR_RESET_VAL | CPACR_ENABLE_FP_ACCESS) & ~(TRCDIS_BIT)) |
| stcopr r0, CPACR |
| isb |
| |
| /* --------------------------------------------------------------------- |
| * Initialise FPEXC, setting all fields rather than relying on hw. Some |
| * fields are architecturally UNKNOWN on reset and are set to zero |
| * except for field(s) listed below. |
| * |
| * FPEXC.EN: Enable access to Advanced SIMD and floating point features |
| * from all exception levels. |
| * |
| * __SOFTFP__: Predefined macro exposed by soft-float toolchain. |
| * ARMv7 and Cortex-A32(ARMv8/aarch32) has both soft-float and |
| * hard-float variants of toolchain, avoid compiling below code with |
| * soft-float toolchain as "vmsr" instruction will not be recognized. |
| * --------------------------------------------------------------------- |
| */ |
| #if ((ARM_ARCH_MAJOR > 7) || defined(ARMV7_SUPPORTS_VFP)) && !(__SOFTFP__) |
| ldr r0, =(FPEXC_RESET_VAL | FPEXC_EN_BIT) |
| vmsr FPEXC, r0 |
| isb |
| #endif |
| |
| #if (ARM_ARCH_MAJOR > 7) |
| /* --------------------------------------------------------------------- |
| * Initialise SDCR, setting all the fields rather than relying on hw. |
| * |
| * SDCR.SPD: Disable AArch32 privileged debug. Debug exceptions from |
| * Secure EL1 are disabled. |
| * |
| * SDCR.SCCD: Set to one so that cycle counting by PMCCNTR is prohibited |
| * in Secure state. This bit is RES0 in versions of the architecture |
| * earlier than ARMv8.5, setting it to 1 doesn't have any effect on |
| * them. |
| * |
| * SDCR.TTRF: Set to one so that access to trace filter control |
| * registers in non-monitor mode generate Monitor trap exception, |
| * unless the access generates a higher priority exception when |
| * trace filter control(FEAT_TRF) is implemented. |
| * When FEAT_TRF is not implemented, this bit is RES0. |
| * --------------------------------------------------------------------- |
| */ |
| ldr r0, =((SDCR_RESET_VAL | SDCR_SPD(SDCR_SPD_DISABLE) | \ |
| SDCR_SCCD_BIT) & ~SDCR_TTRF_BIT) |
| ldcopr r1, ID_DFR0 |
| ubfx r1, r1, #ID_DFR0_TRACEFILT_SHIFT, #ID_DFR0_TRACEFILT_LENGTH |
| cmp r1, #ID_DFR0_TRACEFILT_SUPPORTED |
| bne 1f |
| orr r0, r0, #SDCR_TTRF_BIT |
| 1: |
| stcopr r0, SDCR |
| |
| /* --------------------------------------------------------------------- |
| * Initialise PMCR, setting all fields rather than relying |
| * on hw. Some fields are architecturally UNKNOWN on reset. |
| * |
| * PMCR.LP: Set to one so that event counter overflow, that |
| * is recorded in PMOVSCLR[0-30], occurs on the increment |
| * that changes PMEVCNTR<n>[63] from 1 to 0, when ARMv8.5-PMU |
| * is implemented. This bit is RES0 in versions of the architecture |
| * earlier than ARMv8.5, setting it to 1 doesn't have any effect |
| * on them. |
| * This bit is Reserved, UNK/SBZP in ARMv7. |
| * |
| * PMCR.LC: Set to one so that cycle counter overflow, that |
| * is recorded in PMOVSCLR[31], occurs on the increment |
| * that changes PMCCNTR[63] from 1 to 0. |
| * This bit is Reserved, UNK/SBZP in ARMv7. |
| * |
| * PMCR.DP: Set to one to prohibit cycle counting whilst in Secure mode. |
| * --------------------------------------------------------------------- |
| */ |
| ldr r0, =(PMCR_RESET_VAL | PMCR_DP_BIT | PMCR_LC_BIT | \ |
| PMCR_LP_BIT) |
| #else |
| ldr r0, =(PMCR_RESET_VAL | PMCR_DP_BIT) |
| #endif |
| stcopr r0, PMCR |
| |
| /* |
| * If Data Independent Timing (DIT) functionality is implemented, |
| * always enable DIT in EL3 |
| */ |
| ldcopr r0, ID_PFR0 |
| and r0, r0, #(ID_PFR0_DIT_MASK << ID_PFR0_DIT_SHIFT) |
| cmp r0, #ID_PFR0_DIT_SUPPORTED |
| bne 1f |
| mrs r0, cpsr |
| orr r0, r0, #CPSR_DIT_BIT |
| msr cpsr_cxsf, r0 |
| 1: |
| .endm |
| |
| /* ----------------------------------------------------------------------------- |
| * This is the super set of actions that need to be performed during a cold boot |
| * or a warm boot in EL3. This code is shared by BL1 and BL32 (SP_MIN). |
| * |
| * This macro will always perform reset handling, architectural initialisations |
| * and stack setup. The rest of the actions are optional because they might not |
| * be needed, depending on the context in which this macro is called. This is |
| * why this macro is parameterised ; each parameter allows to enable/disable |
| * some actions. |
| * |
| * _init_sctlr: |
| * Whether the macro needs to initialise the SCTLR register including |
| * configuring the endianness of data accesses. |
| * |
| * _warm_boot_mailbox: |
| * Whether the macro needs to detect the type of boot (cold/warm). The |
| * detection is based on the platform entrypoint address : if it is zero |
| * then it is a cold boot, otherwise it is a warm boot. In the latter case, |
| * this macro jumps on the platform entrypoint address. |
| * |
| * _secondary_cold_boot: |
| * Whether the macro needs to identify the CPU that is calling it: primary |
| * CPU or secondary CPU. The primary CPU will be allowed to carry on with |
| * the platform initialisations, while the secondaries will be put in a |
| * platform-specific state in the meantime. |
| * |
| * If the caller knows this macro will only be called by the primary CPU |
| * then this parameter can be defined to 0 to skip this step. |
| * |
| * _init_memory: |
| * Whether the macro needs to initialise the memory. |
| * |
| * _init_c_runtime: |
| * Whether the macro needs to initialise the C runtime environment. |
| * |
| * _exception_vectors: |
| * Address of the exception vectors to program in the VBAR_EL3 register. |
| * |
| * _pie_fixup_size: |
| * Size of memory region to fixup Global Descriptor Table (GDT). |
| * |
| * A non-zero value is expected when firmware needs GDT to be fixed-up. |
| * |
| * ----------------------------------------------------------------------------- |
| */ |
| .macro el3_entrypoint_common \ |
| _init_sctlr, _warm_boot_mailbox, _secondary_cold_boot, \ |
| _init_memory, _init_c_runtime, _exception_vectors, \ |
| _pie_fixup_size |
| |
| /* Make sure we are in Secure Mode */ |
| #if ENABLE_ASSERTIONS |
| ldcopr r0, SCR |
| tst r0, #SCR_NS_BIT |
| ASM_ASSERT(eq) |
| #endif |
| |
| .if \_init_sctlr |
| /* ------------------------------------------------------------- |
| * This is the initialisation of SCTLR and so must ensure that |
| * all fields are explicitly set rather than relying on hw. Some |
| * fields reset to an IMPLEMENTATION DEFINED value. |
| * |
| * SCTLR.TE: Set to zero so that exceptions to an Exception |
| * Level executing at PL1 are taken to A32 state. |
| * |
| * SCTLR.EE: Set the CPU endianness before doing anything that |
| * might involve memory reads or writes. Set to zero to select |
| * Little Endian. |
| * |
| * SCTLR.V: Set to zero to select the normal exception vectors |
| * with base address held in VBAR. |
| * |
| * SCTLR.DSSBS: Set to zero to disable speculation store bypass |
| * safe behaviour upon exception entry to EL3. |
| * ------------------------------------------------------------- |
| */ |
| ldr r0, =(SCTLR_RESET_VAL & ~(SCTLR_TE_BIT | SCTLR_EE_BIT | \ |
| SCTLR_V_BIT | SCTLR_DSSBS_BIT)) |
| stcopr r0, SCTLR |
| isb |
| .endif /* _init_sctlr */ |
| |
| /* Switch to monitor mode */ |
| cps #MODE32_mon |
| isb |
| |
| #if DISABLE_MTPMU |
| bl mtpmu_disable |
| #endif |
| |
| .if \_warm_boot_mailbox |
| /* ------------------------------------------------------------- |
| * This code will be executed for both warm and cold resets. |
| * Now is the time to distinguish between the two. |
| * Query the platform entrypoint address and if it is not zero |
| * then it means it is a warm boot so jump to this address. |
| * ------------------------------------------------------------- |
| */ |
| bl plat_get_my_entrypoint |
| cmp r0, #0 |
| bxne r0 |
| .endif /* _warm_boot_mailbox */ |
| |
| .if \_pie_fixup_size |
| #if ENABLE_PIE |
| /* |
| * ------------------------------------------------------------ |
| * If PIE is enabled fixup the Global descriptor Table only |
| * once during primary core cold boot path. |
| * |
| * Compile time base address, required for fixup, is calculated |
| * using "pie_fixup" label present within first page. |
| * ------------------------------------------------------------ |
| */ |
| pie_fixup: |
| ldr r0, =pie_fixup |
| ldr r1, =PAGE_START_MASK |
| and r0, r0, r1 |
| mov_imm r1, \_pie_fixup_size |
| add r1, r1, r0 |
| bl fixup_gdt_reloc |
| #endif /* ENABLE_PIE */ |
| .endif /* _pie_fixup_size */ |
| |
| /* --------------------------------------------------------------------- |
| * Set the exception vectors (VBAR/MVBAR). |
| * --------------------------------------------------------------------- |
| */ |
| ldr r0, =\_exception_vectors |
| stcopr r0, VBAR |
| stcopr r0, MVBAR |
| isb |
| |
| /* --------------------------------------------------------------------- |
| * It is a cold boot. |
| * Perform any processor specific actions upon reset e.g. cache, TLB |
| * invalidations etc. |
| * --------------------------------------------------------------------- |
| */ |
| bl reset_handler |
| |
| el3_arch_init_common |
| |
| .if \_secondary_cold_boot |
| /* ------------------------------------------------------------- |
| * Check if this is a primary or secondary CPU cold boot. |
| * The primary CPU will set up the platform while the |
| * secondaries are placed in a platform-specific state until the |
| * primary CPU performs the necessary actions to bring them out |
| * of that state and allows entry into the OS. |
| * ------------------------------------------------------------- |
| */ |
| bl plat_is_my_cpu_primary |
| cmp r0, #0 |
| bne do_primary_cold_boot |
| |
| /* This is a cold boot on a secondary CPU */ |
| bl plat_secondary_cold_boot_setup |
| /* plat_secondary_cold_boot_setup() is not supposed to return */ |
| no_ret plat_panic_handler |
| |
| do_primary_cold_boot: |
| .endif /* _secondary_cold_boot */ |
| |
| /* --------------------------------------------------------------------- |
| * Initialize memory now. Secondary CPU initialization won't get to this |
| * point. |
| * --------------------------------------------------------------------- |
| */ |
| |
| .if \_init_memory |
| bl platform_mem_init |
| .endif /* _init_memory */ |
| |
| /* --------------------------------------------------------------------- |
| * Init C runtime environment: |
| * - Zero-initialise the NOBITS sections. There are 2 of them: |
| * - the .bss section; |
| * - the coherent memory section (if any). |
| * - Relocate the data section from ROM to RAM, if required. |
| * --------------------------------------------------------------------- |
| */ |
| .if \_init_c_runtime |
| #if defined(IMAGE_BL32) || (defined(IMAGE_BL2) && BL2_AT_EL3) |
| /* ----------------------------------------------------------------- |
| * Invalidate the RW memory used by the image. This |
| * includes the data and NOBITS sections. This is done to |
| * safeguard against possible corruption of this memory by |
| * dirty cache lines in a system cache as a result of use by |
| * an earlier boot loader stage. If PIE is enabled however, |
| * RO sections including the GOT may be modified during |
| * pie fixup. Therefore, to be on the safe side, invalidate |
| * the entire image region if PIE is enabled. |
| * ----------------------------------------------------------------- |
| */ |
| #if ENABLE_PIE |
| #if SEPARATE_CODE_AND_RODATA |
| ldr r0, =__TEXT_START__ |
| #else |
| ldr r0, =__RO_START__ |
| #endif /* SEPARATE_CODE_AND_RODATA */ |
| #else |
| ldr r0, =__RW_START__ |
| #endif /* ENABLE_PIE */ |
| ldr r1, =__RW_END__ |
| sub r1, r1, r0 |
| bl inv_dcache_range |
| #endif |
| |
| /* |
| * zeromem uses r12 whereas it is used to save previous BL arg3, |
| * save it in r7 |
| */ |
| mov r7, r12 |
| ldr r0, =__BSS_START__ |
| ldr r1, =__BSS_END__ |
| sub r1, r1, r0 |
| bl zeromem |
| |
| #if USE_COHERENT_MEM |
| ldr r0, =__COHERENT_RAM_START__ |
| ldr r1, =__COHERENT_RAM_END_UNALIGNED__ |
| sub r1, r1, r0 |
| bl zeromem |
| #endif |
| |
| /* Restore r12 */ |
| mov r12, r7 |
| |
| #if defined(IMAGE_BL1) || (defined(IMAGE_BL2) && BL2_AT_EL3 && BL2_IN_XIP_MEM) |
| /* ----------------------------------------------------- |
| * Copy data from ROM to RAM. |
| * ----------------------------------------------------- |
| */ |
| ldr r0, =__DATA_RAM_START__ |
| ldr r1, =__DATA_ROM_START__ |
| ldr r2, =__DATA_RAM_END__ |
| sub r2, r2, r0 |
| bl memcpy4 |
| #endif |
| .endif /* _init_c_runtime */ |
| |
| /* --------------------------------------------------------------------- |
| * Allocate a stack whose memory will be marked as Normal-IS-WBWA when |
| * the MMU is enabled. There is no risk of reading stale stack memory |
| * after enabling the MMU as only the primary CPU is running at the |
| * moment. |
| * --------------------------------------------------------------------- |
| */ |
| bl plat_set_my_stack |
| |
| #if STACK_PROTECTOR_ENABLED |
| .if \_init_c_runtime |
| bl update_stack_protector_canary |
| .endif /* _init_c_runtime */ |
| #endif |
| .endm |
| |
| #endif /* EL3_COMMON_MACROS_S */ |