| /* |
| * Copyright (c) 2019-2021, ARM Limited and Contributors. All rights reserved. |
| * Copyright (c) 2019-2023, Intel Corporation. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <assert.h> |
| #include <arch.h> |
| #include <arch_helpers.h> |
| #include <common/bl_common.h> |
| #include <common/debug.h> |
| #include <common/desc_image_load.h> |
| #include <drivers/cadence/cdns_sdmmc.h> |
| #include <drivers/generic_delay_timer.h> |
| #include <drivers/synopsys/dw_mmc.h> |
| #include <drivers/ti/uart/uart_16550.h> |
| #include <lib/mmio.h> |
| #include <lib/xlat_tables/xlat_tables_v2.h> |
| |
| #include "agilex5_clock_manager.h" |
| #include "agilex5_memory_controller.h" |
| #include "agilex5_mmc.h" |
| #include "agilex5_pinmux.h" |
| #include "agilex5_system_manager.h" |
| #include "ccu/ncore_ccu.h" |
| #include "combophy/combophy.h" |
| #include "nand/nand.h" |
| #include "qspi/cadence_qspi.h" |
| #include "sdmmc/sdmmc.h" |
| #include "socfpga_emac.h" |
| #include "socfpga_f2sdram_manager.h" |
| #include "socfpga_handoff.h" |
| #include "socfpga_mailbox.h" |
| #include "socfpga_private.h" |
| #include "socfpga_reset_manager.h" |
| #include "socfpga_ros.h" |
| #include "wdt/watchdog.h" |
| |
| |
| /* Declare mmc_info */ |
| static struct mmc_device_info mmc_info; |
| |
| /* Declare cadence idmac descriptor */ |
| extern struct cdns_idmac_desc cdns_desc[8] __aligned(32); |
| |
| const mmap_region_t agilex_plat_mmap[] = { |
| MAP_REGION_FLAT(DRAM_BASE, DRAM_SIZE, |
| MT_MEMORY | MT_RW | MT_NS), |
| MAP_REGION_FLAT(PSS_BASE, PSS_SIZE, |
| MT_DEVICE | MT_RW | MT_NS), |
| MAP_REGION_FLAT(MPFE_BASE, MPFE_SIZE, |
| MT_DEVICE | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(OCRAM_BASE, OCRAM_SIZE, |
| MT_NON_CACHEABLE | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(CCU_BASE, CCU_SIZE, |
| MT_DEVICE | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(MEM64_BASE, MEM64_SIZE, |
| MT_DEVICE | MT_RW | MT_NS), |
| MAP_REGION_FLAT(GIC_BASE, GIC_SIZE, |
| MT_DEVICE | MT_RW | MT_SECURE), |
| {0}, |
| }; |
| |
| boot_source_type boot_source = BOOT_SOURCE; |
| |
| void bl2_el3_early_platform_setup(u_register_t x0, u_register_t x1, |
| u_register_t x2, u_register_t x4) |
| { |
| static console_t console; |
| |
| handoff reverse_handoff_ptr = { 0 }; |
| |
| generic_delay_timer_init(); |
| config_clkmgr_handoff(&reverse_handoff_ptr); |
| mailbox_init(); |
| enable_nonsecure_access(); |
| |
| deassert_peripheral_reset(); |
| if (combo_phy_init(&reverse_handoff_ptr) != 0) { |
| ERROR("Combo Phy initialization failed\n"); |
| } |
| |
| console_16550_register(PLAT_INTEL_UART_BASE, PLAT_UART_CLOCK, |
| PLAT_BAUDRATE, &console); |
| |
| /* Store magic number */ |
| // TODO: Temp workaround to ungate testing |
| // mmio_write_32(L2_RESET_DONE_REG, PLAT_L2_RESET_REQ); |
| |
| if (!intel_mailbox_is_fpga_not_ready()) { |
| socfpga_bridges_enable(SOC2FPGA_MASK | LWHPS2FPGA_MASK | |
| FPGA2SOC_MASK | F2SDRAM0_MASK); |
| } |
| } |
| |
| void bl2_el3_plat_arch_setup(void) |
| { |
| handoff reverse_handoff_ptr; |
| unsigned long offset = 0; |
| |
| struct cdns_sdmmc_params params = EMMC_INIT_PARAMS((uintptr_t) &cdns_desc, get_mmc_clk()); |
| |
| mmc_info.mmc_dev_type = MMC_DEVICE_TYPE; |
| mmc_info.ocr_voltage = OCR_3_3_3_4 | OCR_3_2_3_3; |
| |
| /* Request ownership and direct access to QSPI */ |
| mailbox_hps_qspi_enable(); |
| |
| switch (boot_source) { |
| case BOOT_SOURCE_SDMMC: |
| NOTICE("SDMMC boot\n"); |
| sdmmc_init(&reverse_handoff_ptr, ¶ms, &mmc_info); |
| socfpga_io_setup(boot_source, PLAT_SDMMC_DATA_BASE); |
| break; |
| |
| case BOOT_SOURCE_QSPI: |
| NOTICE("QSPI boot\n"); |
| cad_qspi_init(0, QSPI_CONFIG_CPHA, QSPI_CONFIG_CPOL, |
| QSPI_CONFIG_CSDA, QSPI_CONFIG_CSDADS, |
| QSPI_CONFIG_CSEOT, QSPI_CONFIG_CSSOT, 0); |
| if (ros_qspi_get_ssbl_offset(&offset) != ROS_RET_OK) { |
| offset = PLAT_QSPI_DATA_BASE; |
| } |
| socfpga_io_setup(boot_source, offset); |
| break; |
| |
| case BOOT_SOURCE_NAND: |
| NOTICE("NAND boot\n"); |
| nand_init(&reverse_handoff_ptr); |
| socfpga_io_setup(boot_source, PLAT_NAND_DATA_BASE); |
| break; |
| |
| default: |
| ERROR("Unsupported boot source\n"); |
| panic(); |
| break; |
| } |
| } |
| |
| uint32_t get_spsr_for_bl33_entry(void) |
| { |
| unsigned long el_status; |
| unsigned int mode; |
| uint32_t spsr; |
| |
| /* Figure out what mode we enter the non-secure world in */ |
| el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT; |
| el_status &= ID_AA64PFR0_ELX_MASK; |
| |
| mode = (el_status) ? MODE_EL2 : MODE_EL1; |
| |
| /* |
| * TODO: Consider the possibility of specifying the SPSR in |
| * the FIP ToC and allowing the platform to have a say as |
| * well. |
| */ |
| spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS); |
| return spsr; |
| } |
| |
| int bl2_plat_handle_post_image_load(unsigned int image_id) |
| { |
| bl_mem_params_node_t *bl_mem_params = get_bl_mem_params_node(image_id); |
| |
| assert(bl_mem_params); |
| |
| switch (image_id) { |
| case BL33_IMAGE_ID: |
| bl_mem_params->ep_info.args.arg0 = 0xffff & read_mpidr(); |
| bl_mem_params->ep_info.spsr = get_spsr_for_bl33_entry(); |
| break; |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| /******************************************************************************* |
| * Perform any BL3-1 platform setup code |
| ******************************************************************************/ |
| void bl2_platform_setup(void) |
| { |
| } |