| /* |
| * Copyright (c) 2017-2019, ARM Limited and Contributors. All rights reserved. |
| * Copyright (c) 2020, NVIDIA Corporation. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| #include <asm_macros.S> |
| #include <console_macros.S> |
| |
| #define CONSOLE_NUM_BYTES_SHIFT 24 |
| #define CONSOLE_FLUSH_DATA_TO_PORT (1 << 26) |
| #define CONSOLE_RING_DOORBELL (1 << 31) |
| #define CONSOLE_IS_BUSY (1 << 31) |
| #define CONSOLE_TIMEOUT 0xC000 /* 50 ms */ |
| |
| /* |
| * This file contains a driver implementation to make use of the |
| * real console implementation provided by the SPE firmware running |
| * SoCs after Tegra186. |
| * |
| * This console is shared by multiple components and the SPE firmware |
| * finally displays everything on the UART port. |
| */ |
| |
| .globl console_spe_core_init |
| .globl console_spe_core_putc |
| .globl console_spe_core_getc |
| .globl console_spe_core_flush |
| .globl console_spe_putc |
| .globl console_spe_getc |
| .globl console_spe_flush |
| .globl console_spe_register |
| |
| .macro check_if_console_is_ready base, tmp1, tmp2, label |
| /* wait until spe is ready or timeout expires */ |
| mrs \tmp2, cntps_tval_el1 |
| 1: ldr \tmp1, [\base] |
| and \tmp1, \tmp1, #CONSOLE_IS_BUSY |
| cbz \tmp1, 2f |
| mrs \tmp1, cntps_tval_el1 |
| sub \tmp1, \tmp2, \tmp1 |
| cmp \tmp1, #CONSOLE_TIMEOUT |
| b.lt 1b |
| b \label |
| 2: |
| .endm |
| |
| /* ------------------------------------------------- |
| * int console_spe_register(uintptr_t baseaddr, |
| * uint32_t clock, uint32_t baud, |
| * console_t *console); |
| * Function to initialize and register a new spe |
| * console. Storage passed in for the console struct |
| * *must* be persistent (i.e. not from the stack). |
| * In: x0 - UART register base address |
| * w1 - UART clock in Hz |
| * w2 - Baud rate |
| * x3 - pointer to empty console_t struct |
| * Out: return 1 on success, 0 on error |
| * Clobber list : x0, x1, x2, x6, x7, x14 |
| * ------------------------------------------------- |
| */ |
| func console_spe_register |
| /* Check the input base address */ |
| cbz x0, register_fail |
| |
| /* Dont use clock or baud rate, so ok to overwrite them */ |
| check_if_console_is_ready x0, x1, x2, register_fail |
| |
| cbz x3, register_fail |
| str x0, [x3, #CONSOLE_T_BASE] |
| mov x0, x3 |
| finish_console_register spe putc=1, getc=1, flush=1 |
| |
| register_fail: |
| mov w0, wzr |
| ret |
| endfunc console_spe_register |
| |
| /* -------------------------------------------------------- |
| * int console_spe_core_putc(int c, uintptr_t base_addr) |
| * Function to output a character over the console. It |
| * returns the character printed on success or -1 on error. |
| * In : w0 - character to be printed |
| * x1 - console base address |
| * Out : return -1 on error else return character. |
| * Clobber list : x2, x3 |
| * -------------------------------------------------------- |
| */ |
| func console_spe_core_putc |
| /* Check the input parameter */ |
| cbz x1, putc_error |
| |
| /* Prepend '\r' to '\n' */ |
| cmp w0, #0xA |
| b.ne not_eol |
| |
| check_if_console_is_ready x1, x2, x3, putc_error |
| |
| /* spe is ready */ |
| mov w2, #0xD /* '\r' */ |
| and w2, w2, #0xFF |
| mov w3, #(CONSOLE_RING_DOORBELL | (1 << CONSOLE_NUM_BYTES_SHIFT)) |
| orr w2, w2, w3 |
| str w2, [x1] |
| |
| not_eol: |
| check_if_console_is_ready x1, x2, x3, putc_error |
| |
| /* spe is ready */ |
| mov w2, w0 |
| and w2, w2, #0xFF |
| mov w3, #(CONSOLE_RING_DOORBELL | (1 << CONSOLE_NUM_BYTES_SHIFT)) |
| orr w2, w2, w3 |
| str w2, [x1] |
| |
| ret |
| putc_error: |
| mov w0, #-1 |
| ret |
| endfunc console_spe_core_putc |
| |
| /* -------------------------------------------------------- |
| * int console_spe_putc(int c, console_t *console) |
| * Function to output a character over the console. It |
| * returns the character printed on success or -1 on error. |
| * In : w0 - character to be printed |
| * x1 - pointer to console_t structure |
| * Out : return -1 on error else return character. |
| * Clobber list : x2 |
| * -------------------------------------------------------- |
| */ |
| func console_spe_putc |
| ldr x1, [x1, #CONSOLE_T_BASE] |
| b console_spe_core_putc |
| endfunc console_spe_putc |
| |
| /* --------------------------------------------- |
| * int console_spe_getc(console_t *console) |
| * Function to get a character from the console. |
| * It returns the character grabbed on success |
| * or -1 if no character is available. |
| * In : x0 - pointer to console_t structure |
| * Out: w0 - character if available, else -1 |
| * Clobber list : x0, x1 |
| * --------------------------------------------- |
| */ |
| func console_spe_getc |
| mov w0, #-1 |
| ret |
| endfunc console_spe_getc |
| |
| /* ------------------------------------------------- |
| * int console_spe_core_flush(uintptr_t base_addr) |
| * Function to force a write of all buffered |
| * data that hasn't been output. |
| * In : x0 - console base address |
| * Out : return -1 on error else return 0. |
| * Clobber list : x0, x1 |
| * ------------------------------------------------- |
| */ |
| func console_spe_core_flush |
| cbz x0, flush_error |
| |
| /* flush console */ |
| mov w1, #(CONSOLE_RING_DOORBELL | CONSOLE_FLUSH_DATA_TO_PORT) |
| str w1, [x0] |
| mov w0, #0 |
| ret |
| flush_error: |
| mov w0, #-1 |
| ret |
| endfunc console_spe_core_flush |
| |
| /* --------------------------------------------- |
| * int console_spe_flush(console_t *console) |
| * Function to force a write of all buffered |
| * data that hasn't been output. |
| * In : x0 - pointer to console_t structure |
| * Out : return -1 on error else return 0. |
| * Clobber list : x0, x1 |
| * --------------------------------------------- |
| */ |
| func console_spe_flush |
| ldr x0, [x0, #CONSOLE_T_BASE] |
| b console_spe_core_flush |
| endfunc console_spe_flush |