blob: e00c53aaebd1a8a2d7e3970e1d79066100b95b88 [file] [log] [blame]
FF-A manifest binding to device tree
========================================
This document defines the nodes and properties used to define a partition,
according to the FF-A specification.
Partition Properties
--------------------
- compatible [mandatory]
- value type: <string>
- Must be the string "arm,ffa-manifest-X.Y" which specifies the major and
minor versions of the device tree binding for the FFA manifest represented
by this node. The minor number is incremented if the binding changes in a
backwards compatible manner.
- X is an integer representing the major version number of this document.
- Y is an integer representing the minor version number of this document.
- ffa-version [mandatory]
- value type: <u32>
- Must be two 16 bits values (X, Y), concatenated as 31:16 -> X,
15:0 -> Y, where:
- X is the major version of FF-A expected by the partition at the FFA
instance it will execute.
- Y is the minor version of FF-A expected by the partition at the FFA
instance it will execute.
- uuid [mandatory]
- value type: <prop-encoded-array>
- An array consisting of 4 <u32> values, identifying the UUID of the service
implemented by this partition. The UUID format is described in RFC 4122.
- id
- value type: <u32>
- Pre-allocated partition ID.
- auxiliary-id
- value type: <u32>
- Pre-allocated ID that could be used in memory management transactions.
- description
- value type: <string>
- Name of the partition e.g. for debugging purposes.
- execution-ctx-count [mandatory]
- value type: <u32>
- Number of vCPUs that a VM or SP wants to instantiate.
- In the absence of virtualization, this is the number of execution
contexts that a partition implements.
- If value of this field = 1 and number of PEs > 1 then the partition is
treated as UP & migrate capable.
- If the value of this field > 1 then the partition is treated as a MP
capable partition irrespective of the number of PEs.
- exception-level [mandatory]
- value type: <u32>
- The target exception level for the partition:
- 0x0: EL1
- 0x1: S_EL0
- 0x2: S_EL1
- execution-state [mandatory]
- value type: <u32>
- The target execution state of the partition:
- 0: AArch64
- 1: AArch32
- load-address
- value type: <u64>
- Physical base address of the partition in memory. Absence of this field
indicates that the partition is position independent and can be loaded at
any address chosen at boot time.
- entrypoint-offset
- value type: <u64>
- Offset from the base of the partition's binary image to the entry point of
the partition. Absence of this field indicates that the entry point is at
offset 0x0 from the base of the partition's binary.
- xlat-granule [mandatory]
- value type: <u32>
- Translation granule used with the partition:
- 0x0: 4k
- 0x1: 16k
- 0x2: 64k
- boot-order
- value type: <u32>
- A unique number amongst all partitions that specifies if this partition
must be booted before others. The partition with the smaller number will be
booted first.
- rx-tx-buffer
- value type: "memory-regions" node
- Specific "memory-regions" nodes that describe the RX/TX buffers expected
by the partition.
The "compatible" must be the string "arm,ffa-manifest-rx_tx-buffer".
- messaging-method [mandatory]
- value type: <u8>
- Specifies which messaging methods are supported by the partition, set bit
means the feature is supported, clear bit - not supported:
- Bit[0]: partition can receive direct requests if set
- Bit[1]: partition can send direct requests if set
- Bit[2]: partition can send and receive indirect messages
- managed-exit
- value type: <empty>
- Specifies if managed exit is supported.
- This field is deprecated in favor of ns-interrupts-action field in the FF-A
v1.1 EAC0 spec.
- ns-interrupts-action [mandatory]
- value type: <u32>
- Specifies the action that the SPMC must take in response to a Non-secure
physical interrupt.
- 0x0: Non-secure interrupt is queued
- 0x1: Non-secure interrupt is signaled after a managed exit
- 0x2: Non-secure interrupt is signaled
- This field supersedes the managed-exit field in the FF-A v1.0 spec.
- has-primary-scheduler
- value type: <empty>
- Presence of this field indicates that the partition implements the primary
scheduler. If so, run-time EL must be EL1.
- run-time-model
- value type: <u32>
- Run time model that the SPM must enforce for this SP:
- 0x0: Run to completion
- 0x1: Preemptible
- time-slice-mem
- value type: <empty>
- Presence of this field indicates that the partition doesn't expect the
partition manager to time slice long running memory management functions.
- gp-register-num
- value type: <u32>
- The field specifies the general purpose register number but not its width.
The width is derived from the partition's execution state, as specified in
the partition properties. For example, if the number value is 1 then the
general-purpose register used will be x1 in AArch64 state and w1 in AArch32
state.
Presence of this field indicates that the partition expects the address of
the FF-A boot information blob to be passed in the specified general purpose
register.
- stream-endpoint-ids
- value type: <prop-encoded-array>
- List of <u32> tuples, identifying the IDs this partition is acting as
proxy for.
- power-management-messages
- value type: <u32>
- Specifies which power management messages a partition subscribes to.
A set bit means the partition should be informed of the power event, clear
bit - should not be informed of event:
- Bit[0]: CPU_OFF
- Bit[1]: CPU_SUSPEND
- Bit[2]: CPU_SUSPEND_RESUME
Memory Regions
--------------
- compatible [mandatory]
- value type: <string>
- Must be the string "arm,ffa-manifest-memory-regions".
- description
- value type: <string>
- Name of the memory region e.g. for debugging purposes.
- pages-count [mandatory]
- value type: <u32>
- Count of pages of memory region as a multiple of the translation granule
size
- attributes [mandatory]
- value type: <u32>
- Mapping modes: ORed to get required permission
- 0x1: Read
- 0x2: Write
- 0x4: Execute
- 0x8: Security state
- base-address
- value type: <u64>
- Base address of the region. The address must be aligned to the translation
granule size.
The address given may be a Physical Address (PA), Virtual Address (VA), or
Intermediate Physical Address (IPA). Refer to the FF-A specification for
more information on the restrictions around the address type.
If the base address is omitted then the partition manager must map a memory
region of the specified size into the partition's translation regime and
then communicate the region properties (including the base address chosen
by the partition manager) to the partition.
Device Regions
--------------
- compatible [mandatory]
- value type: <string>
- Must be the string "arm,ffa-manifest-device-regions".
- description
- value type: <string>
- Name of the device region e.g. for debugging purposes.
- pages-count [mandatory]
- value type: <u32>
- Count of pages of memory region as a multiple of the translation granule
size
- attributes [mandatory]
- value type: <u32>
- Mapping modes: ORed to get required permission
- 0x1: Read
- 0x2: Write
- 0x4: Execute
- 0x8: Security state
- base-address [mandatory]
- value type: <u64>
- Base address of the region. The address must be aligned to the translation
granule size.
The address given may be a Physical Address (PA), Virtual Address (VA), or
Intermediate Physical Address (IPA). Refer to the FF-A specification for
more information on the restrictions around the address type.
- smmu-id
- value type: <u32>
- On systems with multiple System Memory Management Units (SMMUs) this
identifier is used to inform the partition manager which SMMU the device is
upstream of. If the field is omitted then it is assumed that the device is
not upstream of any SMMU.
- stream-ids
- value type: <prop-encoded-array>
- A list of (id, mem-manage) pair, where:
- id: A unique <u32> value amongst all devices assigned to the partition.
- interrupts [mandatory]
- value type: <prop-encoded-array>
- A list of (id, attributes) pair describing the device interrupts, where:
- id: The <u32> interrupt IDs.
- attributes: A <u32> value, containing attributes for each interrupt ID:
+----------------------+----------+
|Field | Bit(s) |
+----------------------+----------+
| Priority | 7:0 |
+----------------------+----------+
| Security state | 8 |
+----------------------+----------+
| Config(Edge/Level) | 9 |
+----------------------+----------+
| Type(SPI/PPI/SGI) | 11:10 |
+----------------------+----------+
Security state:
- Secure: 1
- Non-secure: 0
Configuration:
- Edge triggered: 0
- Level triggered: 1
Type:
- SPI: 0b10
- PPI: 0b01
- SGI: 0b00
- interrupts-target
- value type: <prop-encoded-array>
- A list of (id, mpdir upper bits, mpidr lower bits) tuples describing which
mpidr the interrupt is routed to, where:
- id: The <u32> interrupt ID. Must be one of those specified in the
"interrupts" field.
- mpidr upper bits: The <u32> describing the upper bits of the 64 bits
mpidr
- mpidr lower bits: The <u32> describing the lower bits of the 64 bits
mpidr
- exclusive-access
- value type: <empty>
- Presence of this field implies that this endpoint must be granted exclusive
access and ownership of this device's MMIO region.
--------------
*Copyright (c) 2019-2022, Arm Limited and Contributors. All rights reserved.*