blob: 2aa973890af3b1192203a04e329e171797300259 [file] [log] [blame]
Arm Development Platform Build Options
======================================
Arm Platform Build Options
--------------------------
- ``ARM_BL31_IN_DRAM``: Boolean option to select loading of BL31 in TZC secured
DRAM. By default, BL31 is in the secure SRAM. Set this flag to 1 to load
BL31 in TZC secured DRAM. If TSP is present, then setting this option also
sets the TSP location to DRAM and ignores the ``ARM_TSP_RAM_LOCATION`` build
flag.
- ``ARM_CONFIG_CNTACR``: boolean option to unlock access to the ``CNTBase<N>``
frame registers by setting the ``CNTCTLBase.CNTACR<N>`` register bits. The
frame number ``<N>`` is defined by ``PLAT_ARM_NSTIMER_FRAME_ID``, which
should match the frame used by the Non-Secure image (normally the Linux
kernel). Default is true (access to the frame is allowed).
- ``ARM_DISABLE_TRUSTED_WDOG``: boolean option to disable the Trusted Watchdog.
By default, Arm platforms use a watchdog to trigger a system reset in case
an error is encountered during the boot process (for example, when an image
could not be loaded or authenticated). The watchdog is enabled in the early
platform setup hook at BL1 and disabled in the BL1 prepare exit hook. The
Trusted Watchdog may be disabled at build time for testing or development
purposes.
- ``ARM_LINUX_KERNEL_AS_BL33``: The Linux kernel expects registers x0-x3 to
have specific values at boot. This boolean option allows the Trusted Firmware
to have a Linux kernel image as BL33 by preparing the registers to these
values before jumping to BL33. This option defaults to 0 (disabled). For
AArch64 ``RESET_TO_BL31`` and for AArch32 ``RESET_TO_SP_MIN`` must be 1 when
using it. If this option is set to 1, ``ARM_PRELOADED_DTB_BASE`` must be set
to the location of a device tree blob (DTB) already loaded in memory. The
Linux Image address must be specified using the ``PRELOADED_BL33_BASE``
option.
- ``ARM_PLAT_MT``: This flag determines whether the Arm platform layer has to
cater for the multi-threading ``MT`` bit when accessing MPIDR. When this flag
is set, the functions which deal with MPIDR assume that the ``MT`` bit in
MPIDR is set and access the bit-fields in MPIDR accordingly. Default value of
this flag is 0. Note that this option is not used on FVP platforms.
- ``ARM_RECOM_STATE_ID_ENC``: The PSCI1.0 specification recommends an encoding
for the construction of composite state-ID in the power-state parameter.
The existing PSCI clients currently do not support this encoding of
State-ID yet. Hence this flag is used to configure whether to use the
recommended State-ID encoding or not. The default value of this flag is 0,
in which case the platform is configured to expect NULL in the State-ID
field of power-state parameter.
- ``ARM_ROTPK_LOCATION``: used when ``TRUSTED_BOARD_BOOT=1``. It specifies the
location of the ROTPK hash returned by the function ``plat_get_rotpk_info()``
for Arm platforms. Depending on the selected option, the proper private key
must be specified using the ``ROT_KEY`` option when building the Trusted
Firmware. This private key will be used by the certificate generation tool
to sign the BL2 and Trusted Key certificates. Available options for
``ARM_ROTPK_LOCATION`` are:
- ``regs`` : return the ROTPK hash stored in the Trusted root-key storage
registers.
- ``devel_rsa`` : return a development public key hash embedded in the BL1
and BL2 binaries. This hash has been obtained from the RSA public key
``arm_rotpk_rsa.der``, located in ``plat/arm/board/common/rotpk``. To use
this option, ``arm_rotprivk_rsa.pem`` must be specified as ``ROT_KEY``
when creating the certificates.
- ``devel_ecdsa`` : return a development public key hash embedded in the BL1
and BL2 binaries. This hash has been obtained from the ECDSA public key
``arm_rotpk_ecdsa.der``, located in ``plat/arm/board/common/rotpk``. To
use this option, ``arm_rotprivk_ecdsa.pem`` must be specified as
``ROT_KEY`` when creating the certificates.
- ``ARM_ROTPK_HASH``: used when ``ARM_ROTPK_LOCATION=devel_*``. Specifies the
location of the ROTPK hash. Not expected to be a build option. This defaults to
``plat/arm/board/common/rotpk/*_sha256.bin`` depending on the specified algorithm.
Providing ``ROT_KEY`` enforces generation of the hash from the ``ROT_KEY`` and
overwrites the default hash file.
- ``ARM_TSP_RAM_LOCATION``: location of the TSP binary. Options:
- ``tsram`` : Trusted SRAM (default option when TBB is not enabled)
- ``tdram`` : Trusted DRAM (if available)
- ``dram`` : Secure region in DRAM (default option when TBB is enabled,
configured by the TrustZone controller)
- ``ARM_XLAT_TABLES_LIB_V1``: boolean option to compile TF-A with version 1
of the translation tables library instead of version 2. It is set to 0 by
default, which selects version 2.
- ``ARM_CRYPTOCELL_INTEG`` : bool option to enable TF-A to invoke ArmĀ®
TrustZoneĀ® CryptoCell functionality for Trusted Board Boot on capable Arm
platforms. If this option is specified, then the path to the CryptoCell
SBROM library must be specified via ``CCSBROM_LIB_PATH`` flag.
- ``ARM_ETHOSN_NPU_DRIVER``: boolean option to enable a SiP service that can
configure an Arm Ethos-N NPU. To use this service the target platform's
``HW_CONFIG`` must include the device tree nodes for the NPU. Currently, only
the Arm Juno platform has this included in its ``HW_CONFIG`` and the platform
only loads the ``HW_CONFIG`` in AArch64 builds. Default is 0.
- ``ARM_SPMC_MANIFEST_DTS`` : path to an alternate manifest file used as the
SPMC Core manifest. Valid when ``SPD=spmd`` is selected.
- ``OPTEE_SP_FW_CONFIG``: DTC build flag to include OP-TEE as SP in tb_fw_config
device tree. This flag is defined only when ``ARM_SPMC_MANIFEST_DTS`` manifest
file name contains pattern optee_sp.
For a better understanding of these options, the Arm development platform memory
map is explained in the :ref:`Firmware Design`.
.. _build_options_arm_css_platform:
Arm CSS Platform-Specific Build Options
---------------------------------------
- ``CSS_DETECT_PRE_1_7_0_SCP``: Boolean flag to detect SCP version
incompatibility. Version 1.7.0 of the SCP firmware made a non-backwards
compatible change to the MTL protocol, used for AP/SCP communication.
TF-A no longer supports earlier SCP versions. If this option is set to 1
then TF-A will detect if an earlier version is in use. Default is 1.
- ``CSS_LOAD_SCP_IMAGES``: Boolean flag, which when set, adds SCP_BL2 and
SCP_BL2U to the FIP and FWU_FIP respectively, and enables them to be loaded
during boot. Default is 1.
- ``CSS_USE_SCMI_SDS_DRIVER``: Boolean flag which selects SCMI/SDS drivers
instead of SCPI/BOM driver for communicating with the SCP during power
management operations and for SCP RAM Firmware transfer. If this option
is set to 1, then SCMI/SDS drivers will be used. Default is 0.
- ``CSS_SGI_CHIP_COUNT``: Configures the number of chips on a SGI/RD platform
which supports multi-chip operation. If ``CSS_SGI_CHIP_COUNT`` is set to any
valid value greater than 1, the platform code performs required configuration
to support multi-chip operation.
--------------
*Copyright (c) 2019-2021, Arm Limited. All rights reserved.*