blob: 3d67ef76735b521e84b4ccf93b9c494c4b00ddf4 [file] [log] [blame]
/*
* Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* Neither the name of ARM nor the names of its contributors may be used
* to endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <arch.h>
#include <arch_helpers.h>
#include <arm_xlat_tables.h>
#include <assert.h>
#include <debug.h>
#include <mmio.h>
#include <plat_arm.h>
#include <platform_def.h>
extern const mmap_region_t plat_arm_mmap[];
/* Weak definitions may be overridden in specific ARM standard platform */
#pragma weak plat_get_ns_image_entrypoint
#pragma weak plat_arm_get_mmap
/* Conditionally provide a weak definition of plat_get_syscnt_freq2 to avoid
* conflicts with the definition in plat/common. */
#if ERROR_DEPRECATED
#pragma weak plat_get_syscnt_freq2
#endif
/*
* Set up the page tables for the generic and platform-specific memory regions.
* The extents of the generic memory regions are specified by the function
* arguments and consist of:
* - Trusted SRAM seen by the BL image;
* - Code section;
* - Read-only data section;
* - Coherent memory region, if applicable.
*/
void arm_setup_page_tables(uintptr_t total_base,
size_t total_size,
uintptr_t code_start,
uintptr_t code_limit,
uintptr_t rodata_start,
uintptr_t rodata_limit
#if USE_COHERENT_MEM
,
uintptr_t coh_start,
uintptr_t coh_limit
#endif
)
{
/*
* Map the Trusted SRAM with appropriate memory attributes.
* Subsequent mappings will adjust the attributes for specific regions.
*/
VERBOSE("Trusted SRAM seen by this BL image: %p - %p\n",
(void *) total_base, (void *) (total_base + total_size));
mmap_add_region(total_base, total_base,
total_size,
MT_MEMORY | MT_RW | MT_SECURE);
/* Re-map the code section */
VERBOSE("Code region: %p - %p\n",
(void *) code_start, (void *) code_limit);
mmap_add_region(code_start, code_start,
code_limit - code_start,
MT_CODE | MT_SECURE);
/* Re-map the read-only data section */
VERBOSE("Read-only data region: %p - %p\n",
(void *) rodata_start, (void *) rodata_limit);
mmap_add_region(rodata_start, rodata_start,
rodata_limit - rodata_start,
MT_RO_DATA | MT_SECURE);
#if USE_COHERENT_MEM
/* Re-map the coherent memory region */
VERBOSE("Coherent region: %p - %p\n",
(void *) coh_start, (void *) coh_limit);
mmap_add_region(coh_start, coh_start,
coh_limit - coh_start,
MT_DEVICE | MT_RW | MT_SECURE);
#endif
/* Now (re-)map the platform-specific memory regions */
mmap_add(plat_arm_get_mmap());
/* Create the page tables to reflect the above mappings */
init_xlat_tables();
}
uintptr_t plat_get_ns_image_entrypoint(void)
{
#ifdef PRELOADED_BL33_BASE
return PRELOADED_BL33_BASE;
#else
return PLAT_ARM_NS_IMAGE_OFFSET;
#endif
}
/*******************************************************************************
* Gets SPSR for BL32 entry
******************************************************************************/
uint32_t arm_get_spsr_for_bl32_entry(void)
{
/*
* The Secure Payload Dispatcher service is responsible for
* setting the SPSR prior to entry into the BL32 image.
*/
return 0;
}
/*******************************************************************************
* Gets SPSR for BL33 entry
******************************************************************************/
#ifndef AARCH32
uint32_t arm_get_spsr_for_bl33_entry(void)
{
unsigned long el_status;
unsigned int mode;
uint32_t spsr;
/* Figure out what mode we enter the non-secure world in */
el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT;
el_status &= ID_AA64PFR0_ELX_MASK;
mode = (el_status) ? MODE_EL2 : MODE_EL1;
/*
* TODO: Consider the possibility of specifying the SPSR in
* the FIP ToC and allowing the platform to have a say as
* well.
*/
spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
return spsr;
}
#else
/*******************************************************************************
* Gets SPSR for BL33 entry
******************************************************************************/
uint32_t arm_get_spsr_for_bl33_entry(void)
{
unsigned int hyp_status, mode, spsr;
hyp_status = GET_VIRT_EXT(read_id_pfr1());
mode = (hyp_status) ? MODE32_hyp : MODE32_svc;
/*
* TODO: Consider the possibility of specifying the SPSR in
* the FIP ToC and allowing the platform to have a say as
* well.
*/
spsr = SPSR_MODE32(mode, plat_get_ns_image_entrypoint() & 0x1,
SPSR_E_LITTLE, DISABLE_ALL_EXCEPTIONS);
return spsr;
}
#endif /* AARCH32 */
/*******************************************************************************
* Configures access to the system counter timer module.
******************************************************************************/
#ifdef ARM_SYS_TIMCTL_BASE
void arm_configure_sys_timer(void)
{
unsigned int reg_val;
#if ARM_CONFIG_CNTACR
reg_val = (1 << CNTACR_RPCT_SHIFT) | (1 << CNTACR_RVCT_SHIFT);
reg_val |= (1 << CNTACR_RFRQ_SHIFT) | (1 << CNTACR_RVOFF_SHIFT);
reg_val |= (1 << CNTACR_RWVT_SHIFT) | (1 << CNTACR_RWPT_SHIFT);
mmio_write_32(ARM_SYS_TIMCTL_BASE + CNTACR_BASE(PLAT_ARM_NSTIMER_FRAME_ID), reg_val);
#endif /* ARM_CONFIG_CNTACR */
reg_val = (1 << CNTNSAR_NS_SHIFT(PLAT_ARM_NSTIMER_FRAME_ID));
mmio_write_32(ARM_SYS_TIMCTL_BASE + CNTNSAR, reg_val);
}
#endif /* ARM_SYS_TIMCTL_BASE */
/*******************************************************************************
* Returns ARM platform specific memory map regions.
******************************************************************************/
const mmap_region_t *plat_arm_get_mmap(void)
{
return plat_arm_mmap;
}
#ifdef ARM_SYS_CNTCTL_BASE
unsigned int plat_get_syscnt_freq2(void)
{
unsigned int counter_base_frequency;
/* Read the frequency from Frequency modes table */
counter_base_frequency = mmio_read_32(ARM_SYS_CNTCTL_BASE + CNTFID_OFF);
/* The first entry of the frequency modes table must not be 0 */
if (counter_base_frequency == 0)
panic();
return counter_base_frequency;
}
#endif /* ARM_SYS_CNTCTL_BASE */