| /* |
| * Copyright (c) 2016-2018, STMicroelectronics - All Rights Reserved |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #ifndef __STM32MP1_I2C_H |
| #define __STM32MP1_I2C_H |
| |
| #include <stdint.h> |
| #include <utils_def.h> |
| |
| /* Bit definition for I2C_CR1 register */ |
| #define I2C_CR1_PE BIT(0) |
| #define I2C_CR1_TXIE BIT(1) |
| #define I2C_CR1_RXIE BIT(2) |
| #define I2C_CR1_ADDRIE BIT(3) |
| #define I2C_CR1_NACKIE BIT(4) |
| #define I2C_CR1_STOPIE BIT(5) |
| #define I2C_CR1_TCIE BIT(6) |
| #define I2C_CR1_ERRIE BIT(7) |
| #define I2C_CR1_DNF GENMASK(11, 8) |
| #define I2C_CR1_ANFOFF BIT(12) |
| #define I2C_CR1_SWRST BIT(13) |
| #define I2C_CR1_TXDMAEN BIT(14) |
| #define I2C_CR1_RXDMAEN BIT(15) |
| #define I2C_CR1_SBC BIT(16) |
| #define I2C_CR1_NOSTRETCH BIT(17) |
| #define I2C_CR1_WUPEN BIT(18) |
| #define I2C_CR1_GCEN BIT(19) |
| #define I2C_CR1_SMBHEN BIT(22) |
| #define I2C_CR1_SMBDEN BIT(21) |
| #define I2C_CR1_ALERTEN BIT(22) |
| #define I2C_CR1_PECEN BIT(23) |
| |
| /* Bit definition for I2C_CR2 register */ |
| #define I2C_CR2_SADD GENMASK(9, 0) |
| #define I2C_CR2_RD_WRN BIT(10) |
| #define I2C_CR2_RD_WRN_OFFSET 10U |
| #define I2C_CR2_ADD10 BIT(11) |
| #define I2C_CR2_HEAD10R BIT(12) |
| #define I2C_CR2_START BIT(13) |
| #define I2C_CR2_STOP BIT(14) |
| #define I2C_CR2_NACK BIT(15) |
| #define I2C_CR2_NBYTES GENMASK(23, 16) |
| #define I2C_CR2_NBYTES_OFFSET 16U |
| #define I2C_CR2_RELOAD BIT(24) |
| #define I2C_CR2_AUTOEND BIT(25) |
| #define I2C_CR2_PECBYTE BIT(26) |
| |
| /* Bit definition for I2C_OAR1 register */ |
| #define I2C_OAR1_OA1 GENMASK(9, 0) |
| #define I2C_OAR1_OA1MODE BIT(10) |
| #define I2C_OAR1_OA1EN BIT(15) |
| |
| /* Bit definition for I2C_OAR2 register */ |
| #define I2C_OAR2_OA2 GENMASK(7, 1) |
| #define I2C_OAR2_OA2MSK GENMASK(10, 8) |
| #define I2C_OAR2_OA2NOMASK 0 |
| #define I2C_OAR2_OA2MASK01 BIT(8) |
| #define I2C_OAR2_OA2MASK02 BIT(9) |
| #define I2C_OAR2_OA2MASK03 GENMASK(9, 8) |
| #define I2C_OAR2_OA2MASK04 BIT(10) |
| #define I2C_OAR2_OA2MASK05 (BIT(8) | BIT(10)) |
| #define I2C_OAR2_OA2MASK06 (BIT(9) | BIT(10)) |
| #define I2C_OAR2_OA2MASK07 GENMASK(10, 8) |
| #define I2C_OAR2_OA2EN BIT(15) |
| |
| /* Bit definition for I2C_TIMINGR register */ |
| #define I2C_TIMINGR_SCLL GENMASK(7, 0) |
| #define I2C_TIMINGR_SCLH GENMASK(15, 8) |
| #define I2C_TIMINGR_SDADEL GENMASK(19, 16) |
| #define I2C_TIMINGR_SCLDEL GENMASK(23, 20) |
| #define I2C_TIMINGR_PRESC GENMASK(31, 28) |
| |
| /* Bit definition for I2C_TIMEOUTR register */ |
| #define I2C_TIMEOUTR_TIMEOUTA GENMASK(11, 0) |
| #define I2C_TIMEOUTR_TIDLE BIT(12) |
| #define I2C_TIMEOUTR_TIMOUTEN BIT(15) |
| #define I2C_TIMEOUTR_TIMEOUTB GENMASK(27, 16) |
| #define I2C_TIMEOUTR_TEXTEN BIT(31) |
| |
| /* Bit definition for I2C_ISR register */ |
| #define I2C_ISR_TXE BIT(0) |
| #define I2C_ISR_TXIS BIT(1) |
| #define I2C_ISR_RXNE BIT(2) |
| #define I2C_ISR_ADDR BIT(3) |
| #define I2C_ISR_NACKF BIT(4) |
| #define I2C_ISR_STOPF BIT(5) |
| #define I2C_ISR_TC BIT(6) |
| #define I2C_ISR_TCR BIT(7) |
| #define I2C_ISR_BERR BIT(8) |
| #define I2C_ISR_ARLO BIT(9) |
| #define I2C_ISR_OVR BIT(10) |
| #define I2C_ISR_PECERR BIT(11) |
| #define I2C_ISR_TIMEOUT BIT(12) |
| #define I2C_ISR_ALERT BIT(13) |
| #define I2C_ISR_BUSY BIT(15) |
| #define I2C_ISR_DIR BIT(16) |
| #define I2C_ISR_ADDCODE GENMASK(23, 17) |
| |
| /* Bit definition for I2C_ICR register */ |
| #define I2C_ICR_ADDRCF BIT(3) |
| #define I2C_ICR_NACKCF BIT(4) |
| #define I2C_ICR_STOPCF BIT(5) |
| #define I2C_ICR_BERRCF BIT(8) |
| #define I2C_ICR_ARLOCF BIT(9) |
| #define I2C_ICR_OVRCF BIT(10) |
| #define I2C_ICR_PECCF BIT(11) |
| #define I2C_ICR_TIMOUTCF BIT(12) |
| #define I2C_ICR_ALERTCF BIT(13) |
| |
| struct stm32_i2c_init_s { |
| uint32_t timing; /* Specifies the I2C_TIMINGR_register value |
| * This parameter is calculated by referring |
| * to I2C initialization section in Reference |
| * manual. |
| */ |
| |
| uint32_t own_address1; /* Specifies the first device own address. |
| * This parameter can be a 7-bit or 10-bit |
| * address. |
| */ |
| |
| uint32_t addressing_mode; /* Specifies if 7-bit or 10-bit addressing |
| * mode is selected. |
| * This parameter can be a value of @ref |
| * I2C_ADDRESSING_MODE. |
| */ |
| |
| uint32_t dual_address_mode; /* Specifies if dual addressing mode is |
| * selected. |
| * This parameter can be a value of @ref |
| * I2C_DUAL_ADDRESSING_MODE. |
| */ |
| |
| uint32_t own_address2; /* Specifies the second device own address |
| * if dual addressing mode is selected. |
| * This parameter can be a 7-bit address. |
| */ |
| |
| uint32_t own_address2_masks; /* Specifies the acknowledge mask address |
| * second device own address if dual |
| * addressing mode is selected. |
| * This parameter can be a value of @ref |
| * I2C_OWN_ADDRESS2_MASKS. |
| */ |
| |
| uint32_t general_call_mode; /* Specifies if general call mode is |
| * selected. |
| * This parameter can be a value of @ref |
| * I2C_GENERAL_CALL_ADDRESSING_MODE. |
| */ |
| |
| uint32_t no_stretch_mode; /* Specifies if nostretch mode is |
| * selected. |
| * This parameter can be a value of @ref |
| * I2C_NOSTRETCH_MODE. |
| */ |
| |
| }; |
| |
| enum i2c_state_e { |
| I2C_STATE_RESET = 0x00U, /* Peripheral is not yet |
| * initialized. |
| */ |
| I2C_STATE_READY = 0x20U, /* Peripheral Initialized |
| * and ready for use. |
| */ |
| I2C_STATE_BUSY = 0x24U, /* An internal process is |
| * ongoing. |
| */ |
| I2C_STATE_BUSY_TX = 0x21U, /* Data Transmission process |
| * is ongoing. |
| */ |
| I2C_STATE_BUSY_RX = 0x22U, /* Data Reception process |
| * is ongoing. |
| */ |
| I2C_STATE_LISTEN = 0x28U, /* Address Listen Mode is |
| * ongoing. |
| */ |
| I2C_STATE_BUSY_TX_LISTEN = 0x29U, /* Address Listen Mode |
| * and Data Transmission |
| * process is ongoing. |
| */ |
| I2C_STATE_BUSY_RX_LISTEN = 0x2AU, /* Address Listen Mode |
| * and Data Reception |
| * process is ongoing. |
| */ |
| I2C_STATE_ABORT = 0x60U, /* Abort user request ongoing. */ |
| I2C_STATE_TIMEOUT = 0xA0U, /* Timeout state. */ |
| I2C_STATE_ERROR = 0xE0U /* Error. */ |
| |
| }; |
| |
| enum i2c_mode_e { |
| I2C_MODE_NONE = 0x00U, /* No I2C communication on going. */ |
| I2C_MODE_MASTER = 0x10U, /* I2C communication is in Master Mode. */ |
| I2C_MODE_SLAVE = 0x20U, /* I2C communication is in Slave Mode. */ |
| I2C_MODE_MEM = 0x40U /* I2C communication is in Memory Mode. */ |
| |
| }; |
| |
| #define I2C_ERROR_NONE 0x00000000U /* No error */ |
| #define I2C_ERROR_BERR 0x00000001U /* BERR error */ |
| #define I2C_ERROR_ARLO 0x00000002U /* ARLO error */ |
| #define I2C_ERROR_AF 0x00000004U /* ACKF error */ |
| #define I2C_ERROR_OVR 0x00000008U /* OVR error */ |
| #define I2C_ERROR_DMA 0x00000010U /* DMA transfer error */ |
| #define I2C_ERROR_TIMEOUT 0x00000020U /* Timeout error */ |
| #define I2C_ERROR_SIZE 0x00000040U /* Size Management error */ |
| |
| struct i2c_handle_s { |
| uint32_t i2c_base_addr; /* Registers base address */ |
| |
| struct stm32_i2c_init_s i2c_init; /* Communication parameters */ |
| |
| uint8_t *p_buff; /* Pointer to transfer buffer */ |
| |
| uint16_t xfer_size; /* Transfer size */ |
| |
| uint16_t xfer_count; /* Transfer counter */ |
| |
| uint32_t prev_state; /* Communication previous |
| * state |
| */ |
| |
| uint8_t lock; /* Locking object */ |
| |
| enum i2c_state_e i2c_state; /* Communication state */ |
| |
| enum i2c_mode_e i2c_mode; /* Communication mode */ |
| |
| uint32_t i2c_err; /* Error code */ |
| }; |
| |
| #define I2C_ADDRESSINGMODE_7BIT 0x00000001U |
| #define I2C_ADDRESSINGMODE_10BIT 0x00000002U |
| |
| #define I2C_DUALADDRESS_DISABLE 0x00000000U |
| #define I2C_DUALADDRESS_ENABLE I2C_OAR2_OA2EN |
| |
| #define I2C_GENERALCALL_DISABLE 0x00000000U |
| #define I2C_GENERALCALL_ENABLE I2C_CR1_GCEN |
| |
| #define I2C_NOSTRETCH_DISABLE 0x00000000U |
| #define I2C_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH |
| |
| #define I2C_MEMADD_SIZE_8BIT 0x00000001U |
| #define I2C_MEMADD_SIZE_16BIT 0x00000002U |
| |
| #define I2C_RELOAD_MODE I2C_CR2_RELOAD |
| #define I2C_AUTOEND_MODE I2C_CR2_AUTOEND |
| #define I2C_SOFTEND_MODE 0x00000000U |
| |
| #define I2C_NO_STARTSTOP 0x00000000U |
| #define I2C_GENERATE_STOP (BIT(31) | I2C_CR2_STOP) |
| #define I2C_GENERATE_START_READ (BIT(31) | I2C_CR2_START | \ |
| I2C_CR2_RD_WRN) |
| #define I2C_GENERATE_START_WRITE (BIT(31) | I2C_CR2_START) |
| |
| #define I2C_FLAG_TXE I2C_ISR_TXE |
| #define I2C_FLAG_TXIS I2C_ISR_TXIS |
| #define I2C_FLAG_RXNE I2C_ISR_RXNE |
| #define I2C_FLAG_ADDR I2C_ISR_ADDR |
| #define I2C_FLAG_AF I2C_ISR_NACKF |
| #define I2C_FLAG_STOPF I2C_ISR_STOPF |
| #define I2C_FLAG_TC I2C_ISR_TC |
| #define I2C_FLAG_TCR I2C_ISR_TCR |
| #define I2C_FLAG_BERR I2C_ISR_BERR |
| #define I2C_FLAG_ARLO I2C_ISR_ARLO |
| #define I2C_FLAG_OVR I2C_ISR_OVR |
| #define I2C_FLAG_PECERR I2C_ISR_PECERR |
| #define I2C_FLAG_TIMEOUT I2C_ISR_TIMEOUT |
| #define I2C_FLAG_ALERT I2C_ISR_ALERT |
| #define I2C_FLAG_BUSY I2C_ISR_BUSY |
| #define I2C_FLAG_DIR I2C_ISR_DIR |
| |
| #define I2C_RESET_CR2 (I2C_CR2_SADD | I2C_CR2_HEAD10R | \ |
| I2C_CR2_NBYTES | I2C_CR2_RELOAD | \ |
| I2C_CR2_RD_WRN) |
| |
| #define I2C_ANALOGFILTER_ENABLE ((uint32_t)0x00000000U) |
| #define I2C_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF |
| |
| int stm32_i2c_init(struct i2c_handle_s *hi2c); |
| |
| int stm32_i2c_mem_write(struct i2c_handle_s *hi2c, uint16_t dev_addr, |
| uint16_t mem_addr, uint16_t mem_add_size, |
| uint8_t *p_data, uint16_t size, uint32_t timeout); |
| int stm32_i2c_mem_read(struct i2c_handle_s *hi2c, uint16_t dev_addr, |
| uint16_t mem_addr, uint16_t mem_add_size, |
| uint8_t *p_data, uint16_t size, uint32_t timeout); |
| int stm32_i2c_is_device_ready(struct i2c_handle_s *hi2c, uint16_t dev_addr, |
| uint32_t trials, uint32_t timeout); |
| |
| int stm32_i2c_config_analog_filter(struct i2c_handle_s *hi2c, |
| uint32_t analog_filter); |
| |
| #endif /* __STM32MP1_I2C_H */ |