stm32mp1: update device tree files
The drivers are also updated to reflect the changes.
Set RCC as non-secure.
Change-Id: I568fa1f418355830ad1d4d1cdcdb910fb362231b
Signed-off-by: Yann Gautier <yann.gautier@st.com>
diff --git a/fdts/stm32mp157c-ed1.dts b/fdts/stm32mp157c-ed1.dts
index 0c00b13..a97e805 100644
--- a/fdts/stm32mp157c-ed1.dts
+++ b/fdts/stm32mp157c-ed1.dts
@@ -3,20 +3,26 @@
* Copyright (C) STMicroelectronics 2017 - All Rights Reserved
* Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
*/
-
/dts-v1/;
#include "stm32mp157c.dtsi"
#include "stm32mp157caa-pinctrl.dtsi"
/ {
- model = "STMicroelectronics STM32MP157C-ED1 pmic eval daughter";
+ model = "STMicroelectronics STM32MP157C eval daughter";
compatible = "st,stm32mp157c-ed1", "st,stm32mp157";
chosen {
- bootargs = "earlyprintk console=ttyS3,115200 root=/dev/ram";
- stdout-path = "serial3:115200n8";
+ stdout-path = "serial0:115200n8";
};
+
+ aliases {
+ serial0 = &uart4;
+ };
+};
+
+&clk_hse {
+ st,digbypass;
};
&i2c4 {
@@ -29,59 +35,110 @@
pmic: stpmic@33 {
compatible = "st,stpmic1";
reg = <0x33>;
+ interrupts-extended = <&exti_pwr 55 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
status = "okay";
- st,main_control_register = <0x04>;
- st,vin_control_register = <0xc0>;
- st,usb_control_register = <0x30>;
+ st,main-control-register = <0x04>;
+ st,vin-control-register = <0xc0>;
+ st,usb-control-register = <0x30>;
regulators {
compatible = "st,stpmic1-regulators";
+ ldo1-supply = <&v3v3>;
+ ldo2-supply = <&v3v3>;
+ ldo3-supply = <&vdd_ddr>;
+ ldo5-supply = <&v3v3>;
+ ldo6-supply = <&v3v3>;
+
+ vddcore: buck1 {
+ regulator-name = "vddcore";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd_ddr: buck2 {
+ regulator-name = "vdd_ddr";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd: buck3 {
+ regulator-name = "vdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ st,mask-reset;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
v3v3: buck4 {
regulator-name = "v3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- regulator-boot-on;
+ regulator-always-on;
regulator-over-current-protection;
- regulator-initial-mode = <8>;
+ regulator-initial-mode = <0>;
+ };
+
+ vdda: ldo1 {
+ regulator-name = "vdda";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ };
- regulator-state-standby {
- regulator-suspend-microvolt = <3300000>;
- regulator-unchanged-in-suspend;
- regulator-mode = <8>;
- };
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- regulator-state-disk {
- regulator-off-in-suspend;
- };
+ v2v8: ldo2 {
+ regulator-name = "v2v8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
};
+ vtt_ddr: ldo3 {
+ regulator-name = "vtt_ddr";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <750000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ };
+
+ vdd_usb: ldo4 {
+ regulator-name = "vdd_usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
vdd_sd: ldo5 {
regulator-name = "vdd_sd";
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <2900000>;
regulator-boot-on;
+ };
- regulator-state-standby {
- regulator-suspend-microvolt = <2900000>;
- regulator-unchanged-in-suspend;
- };
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- regulator-state-disk {
- regulator-off-in-suspend;
- };
+ v1v8: ldo6 {
+ regulator-name = "v1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vref_ddr: vref_ddr {
+ regulator-name = "vref_ddr";
+ regulator-always-on;
+ regulator-over-current-protection;
};
};
};
};
&iwdg2 {
- instance = <2>;
timeout-sec = <32>;
status = "okay";
};
@@ -90,14 +147,19 @@
status = "okay";
};
+&rtc {
+ status = "okay";
+};
+
&sdmmc1 {
pinctrl-names = "default";
pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
broken-cd;
- st,dirpol;
- st,negedge;
- st,pin-ckin;
+ st,sig-dir;
+ st,neg-edge;
+ st,use-ckin;
bus-width = <4>;
+ vmmc-supply = <&vdd_sd>;
sd-uhs-sdr12;
sd-uhs-sdr25;
sd-uhs-sdr50;
@@ -112,16 +174,17 @@
non-removable;
no-sd;
no-sdio;
- st,dirpol;
- st,negedge;
+ st,neg-edge;
bus-width = <8>;
+ vmmc-supply = <&v3v3>;
+ vqmmc-supply = <&v3v3>;
+ mmc-ddr-3_3v;
status = "okay";
};
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&uart4_pins_a>;
- resets = <&rcc UART4_R>;
status = "okay";
};
@@ -157,6 +220,7 @@
/* CLOCK init */
&rcc {
+ secure-status = "disabled";
st,clksrc = <
CLK_MPU_PLL1P
CLK_AXI_PLL2P
@@ -186,7 +250,7 @@
CLK_FMC_ACLK
CLK_QSPI_ACLK
CLK_ETH_DISABLED
- CLK_SDMMC12_PLL3R
+ CLK_SDMMC12_PLL4P
CLK_DSI_DSIPLL
CLK_STGEN_HSE
CLK_USBPHY_HSE
@@ -195,7 +259,7 @@
CLK_SPI45_HSI
CLK_SPI6_HSI
CLK_I2C46_HSI
- CLK_SDMMC3_PLL3R
+ CLK_SDMMC3_PLL4P
CLK_USBO_USBPHY
CLK_ADC_CKPER
CLK_CEC_LSE
@@ -206,17 +270,17 @@
CLK_UART35_HSI
CLK_UART6_HSI
CLK_UART78_HSI
- CLK_SPDIF_PLL3Q
+ CLK_SPDIF_PLL4P
CLK_FDCAN_PLL4Q
CLK_SAI1_PLL3Q
CLK_SAI2_PLL3Q
CLK_SAI3_PLL3Q
CLK_SAI4_PLL3Q
- CLK_RNG1_CSI
- CLK_RNG2_CSI
+ CLK_RNG1_LSI
+ CLK_RNG2_LSI
CLK_LPTIM1_PCLK1
CLK_LPTIM23_PCLK3
- CLK_LPTIM45_PCLK3
+ CLK_LPTIM45_LSE
>;
/* VCO = 1300.0 MHz => P = 650 (CPU) */
@@ -231,15 +295,15 @@
frac = < 0x1400 >;
};
- /* VCO = 786.4 MHz => P = 197, Q = 49, R = 98 */
+ /* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
pll3: st,pll@2 {
- cfg = < 2 97 3 15 7 PQR(1,1,1) >;
- frac = < 0x9ba >;
+ cfg = < 1 33 1 16 36 PQR(1,1,1) >;
+ frac = < 0x1a04 >;
};
- /* VCO = 508.0 MHz => P = 56, Q = 56, R = 56 */
+ /* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */
pll4: st,pll@3 {
- cfg = < 5 126 8 8 8 PQR(1,1,1) >;
+ cfg = < 3 98 5 7 7 PQR(1,1,1) >;
};
};