stm32mp1: update device tree files
The drivers are also updated to reflect the changes.
Set RCC as non-secure.
Change-Id: I568fa1f418355830ad1d4d1cdcdb910fb362231b
Signed-off-by: Yann Gautier <yann.gautier@st.com>
diff --git a/fdts/stm32mp15-ddr.dtsi b/fdts/stm32mp15-ddr.dtsi
index be4e2c3..1a5c51c 100644
--- a/fdts/stm32mp15-ddr.dtsi
+++ b/fdts/stm32mp15-ddr.dtsi
@@ -5,7 +5,7 @@
/ {
soc {
- ddr: ddr@0x5A003000{
+ ddr: ddr@5A003000{
compatible = "st,stm32mp1-ddr";
diff --git a/fdts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi b/fdts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi
index 58a4cdc..82e7104 100644
--- a/fdts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi
+++ b/fdts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi
@@ -3,7 +3,7 @@
* Copyright (C) 2018, STMicroelectronics - All Rights Reserved
*/
-/* STM32MP157C ED1 and ED2 BOARD configuration
+/* STM32MP157C ED1 BOARD configuration
* 2x DDR3L 4Gb each, 16-bit, 533MHz, Single Die Package in flyby topology.
* Reference used NT5CC256M16DP-DI from NANYA
*
@@ -15,10 +15,11 @@
* timing mode optimized
* Scheduling/QoS options : type = 2
* address mapping : RBC
+ * Tc > + 85C : N
*/
-#define DDR_MEM_NAME "DDR3-1066 bin G 2x4Gb 533MHz v1.39"
-#define DDR_MEM_SPEED 533
+#define DDR_MEM_NAME "DDR3-1066/888 bin G 2x4Gb 533MHz v1.41"
+#define DDR_MEM_SPEED 533000
#define DDR_MEM_SIZE 0x40000000
#define DDR_MSTR 0x00040401
@@ -62,7 +63,7 @@
#define DDR_ADDRMAP11 0x00000000
#define DDR_ODTCFG 0x06000600
#define DDR_ODTMAP 0x00000001
-#define DDR_SCHED 0x00001201
+#define DDR_SCHED 0x00000C01
#define DDR_SCHED1 0x00000000
#define DDR_PERFHPR1 0x01000001
#define DDR_PERFLPR1 0x08000200
@@ -74,15 +75,15 @@
#define DDR_PCCFG 0x00000010
#define DDR_PCFGR_0 0x00010000
#define DDR_PCFGW_0 0x00000000
-#define DDR_PCFGQOS0_0 0x02100B03
+#define DDR_PCFGQOS0_0 0x02100C03
#define DDR_PCFGQOS1_0 0x00800100
-#define DDR_PCFGWQOS0_0 0x01100B03
+#define DDR_PCFGWQOS0_0 0x01100C03
#define DDR_PCFGWQOS1_0 0x01000200
#define DDR_PCFGR_1 0x00010000
#define DDR_PCFGW_1 0x00000000
-#define DDR_PCFGQOS0_1 0x02100B03
-#define DDR_PCFGQOS1_1 0x00800000
-#define DDR_PCFGWQOS0_1 0x01100B03
+#define DDR_PCFGQOS0_1 0x02100C03
+#define DDR_PCFGQOS1_1 0x00800040
+#define DDR_PCFGWQOS0_1 0x01100C03
#define DDR_PCFGWQOS1_1 0x01000200
#define DDR_PGCR 0x01442E02
#define DDR_PTR0 0x0022AA5B
diff --git a/fdts/stm32mp157-pinctrl.dtsi b/fdts/stm32mp157-pinctrl.dtsi
index 21bd34e..9dcd7b5 100644
--- a/fdts/stm32mp157-pinctrl.dtsi
+++ b/fdts/stm32mp157-pinctrl.dtsi
@@ -3,13 +3,14 @@
* Copyright (C) STMicroelectronics 2017 - All Rights Reserved
* Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
*/
-
#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+
/ {
soc {
- pinctrl: pin-controller {
+ pinctrl: pin-controller@50002000 {
#address-cells = <1>;
#size-cells = <1>;
+ compatible = "st,stm32mp157-pinctrl";
ranges = <0 0x50002000 0xa400>;
pins-are-numbered;
@@ -134,54 +135,76 @@
status = "disabled";
};
- uart4_pins_a: uart4@0 {
+ qspi_bk1_pins_a: qspi-bk1-0 {
pins1 {
- pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+ pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
+ <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */
+ <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */
+ <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
bias-disable;
drive-push-pull;
- slew-rate = <0>;
+ slew-rate = <1>;
};
pins2 {
- pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
- bias-disable;
+ pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
+ bias-pull-up;
+ drive-push-pull;
+ slew-rate = <1>;
};
};
- usart3_pins_a: usart3@0 {
+ qspi_bk2_pins_a: qspi-bk2-0 {
pins1 {
- pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
- <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+ pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */
+ <STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */
+ <STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */
+ <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */
bias-disable;
drive-push-pull;
- slew-rate = <0>;
+ slew-rate = <1>;
};
pins2 {
- pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
- <STM32_PINMUX('I', 10, AF8)>; /* USART3_CTS_NSS */
- bias-disable;
+ pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */
+ bias-pull-up;
+ drive-push-pull;
+ slew-rate = <1>;
};
};
- sdmmc1_b4_pins_a: sdmmc1-b4@0 {
+ qspi_clk_pins_a: qspi-clk-0 {
pins {
+ pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ };
+
+ sdmmc1_b4_pins_a: sdmmc1-b4-0 {
+ pins1 {
pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
<STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
<STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
<STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
- <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */
<STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
- slew-rate = <3>;
+ slew-rate = <1>;
drive-push-pull;
bias-disable;
};
+ pins2 {
+ pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+ slew-rate = <2>;
+ drive-push-pull;
+ bias-disable;
+ };
};
- sdmmc1_dir_pins_a: sdmmc1-dir@0 {
+ sdmmc1_dir_pins_a: sdmmc1-dir-0 {
pins1 {
pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
<STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
<STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
- slew-rate = <3>;
+ slew-rate = <1>;
drive-push-pull;
bias-pull-up;
};
@@ -191,36 +214,85 @@
};
};
- sdmmc2_b4_pins_a: sdmmc2-b4@0 {
- pins {
+ sdmmc1_dir_pins_b: sdmmc1-dir-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('E', 12, AF8)>, /* SDMMC1_D0DIR */
+ <STM32_PINMUX('E', 14, AF11)>, /* SDMMC1_D123DIR */
+ <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
+ slew-rate = <3>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
+ bias-pull-up;
+ };
+ };
+
+ sdmmc2_b4_pins_a: sdmmc2-b4-0 {
+ pins1 {
pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
<STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
<STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
<STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
- <STM32_PINMUX('E', 3, AF9)>, /* SDMMC2_CK */
<STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
- slew-rate = <3>;
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+ slew-rate = <2>;
drive-push-pull;
bias-pull-up;
};
};
- sdmmc2_d47_pins_a: sdmmc2-d47@0 {
+ sdmmc2_d47_pins_a: sdmmc2-d47-0 {
pins {
pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
<STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
<STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
<STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */
- slew-rate = <3>;
+ slew-rate = <1>;
drive-push-pull;
bias-pull-up;
};
};
+
+ uart4_pins_a: uart4-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+ bias-disable;
+ };
+ };
+
+ usart3_pins_a: usart3-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
+ <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
+ <STM32_PINMUX('I', 10, AF8)>; /* USART3_CTS_NSS */
+ bias-disable;
+ };
+ };
};
- pinctrl_z: pin-controller-z {
+ pinctrl_z: pin-controller-z@54004000 {
#address-cells = <1>;
#size-cells = <1>;
+ compatible = "st,stm32mp157-z-pinctrl";
ranges = <0 0x54004000 0x400>;
pins-are-numbered;
@@ -236,7 +308,7 @@
status = "disabled";
};
- i2c4_pins_a: i2c4@0 {
+ i2c4_pins_a: i2c4-0 {
pins {
pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */
<STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */
diff --git a/fdts/stm32mp157c-ed1.dts b/fdts/stm32mp157c-ed1.dts
index 0c00b13..a97e805 100644
--- a/fdts/stm32mp157c-ed1.dts
+++ b/fdts/stm32mp157c-ed1.dts
@@ -3,20 +3,26 @@
* Copyright (C) STMicroelectronics 2017 - All Rights Reserved
* Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
*/
-
/dts-v1/;
#include "stm32mp157c.dtsi"
#include "stm32mp157caa-pinctrl.dtsi"
/ {
- model = "STMicroelectronics STM32MP157C-ED1 pmic eval daughter";
+ model = "STMicroelectronics STM32MP157C eval daughter";
compatible = "st,stm32mp157c-ed1", "st,stm32mp157";
chosen {
- bootargs = "earlyprintk console=ttyS3,115200 root=/dev/ram";
- stdout-path = "serial3:115200n8";
+ stdout-path = "serial0:115200n8";
};
+
+ aliases {
+ serial0 = &uart4;
+ };
+};
+
+&clk_hse {
+ st,digbypass;
};
&i2c4 {
@@ -29,59 +35,110 @@
pmic: stpmic@33 {
compatible = "st,stpmic1";
reg = <0x33>;
+ interrupts-extended = <&exti_pwr 55 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
status = "okay";
- st,main_control_register = <0x04>;
- st,vin_control_register = <0xc0>;
- st,usb_control_register = <0x30>;
+ st,main-control-register = <0x04>;
+ st,vin-control-register = <0xc0>;
+ st,usb-control-register = <0x30>;
regulators {
compatible = "st,stpmic1-regulators";
+ ldo1-supply = <&v3v3>;
+ ldo2-supply = <&v3v3>;
+ ldo3-supply = <&vdd_ddr>;
+ ldo5-supply = <&v3v3>;
+ ldo6-supply = <&v3v3>;
+
+ vddcore: buck1 {
+ regulator-name = "vddcore";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd_ddr: buck2 {
+ regulator-name = "vdd_ddr";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd: buck3 {
+ regulator-name = "vdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ st,mask-reset;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
v3v3: buck4 {
regulator-name = "v3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- regulator-boot-on;
+ regulator-always-on;
regulator-over-current-protection;
- regulator-initial-mode = <8>;
+ regulator-initial-mode = <0>;
+ };
+
+ vdda: ldo1 {
+ regulator-name = "vdda";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ };
- regulator-state-standby {
- regulator-suspend-microvolt = <3300000>;
- regulator-unchanged-in-suspend;
- regulator-mode = <8>;
- };
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- regulator-state-disk {
- regulator-off-in-suspend;
- };
+ v2v8: ldo2 {
+ regulator-name = "v2v8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
};
+ vtt_ddr: ldo3 {
+ regulator-name = "vtt_ddr";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <750000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ };
+
+ vdd_usb: ldo4 {
+ regulator-name = "vdd_usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
vdd_sd: ldo5 {
regulator-name = "vdd_sd";
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <2900000>;
regulator-boot-on;
+ };
- regulator-state-standby {
- regulator-suspend-microvolt = <2900000>;
- regulator-unchanged-in-suspend;
- };
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- regulator-state-disk {
- regulator-off-in-suspend;
- };
+ v1v8: ldo6 {
+ regulator-name = "v1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vref_ddr: vref_ddr {
+ regulator-name = "vref_ddr";
+ regulator-always-on;
+ regulator-over-current-protection;
};
};
};
};
&iwdg2 {
- instance = <2>;
timeout-sec = <32>;
status = "okay";
};
@@ -90,14 +147,19 @@
status = "okay";
};
+&rtc {
+ status = "okay";
+};
+
&sdmmc1 {
pinctrl-names = "default";
pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
broken-cd;
- st,dirpol;
- st,negedge;
- st,pin-ckin;
+ st,sig-dir;
+ st,neg-edge;
+ st,use-ckin;
bus-width = <4>;
+ vmmc-supply = <&vdd_sd>;
sd-uhs-sdr12;
sd-uhs-sdr25;
sd-uhs-sdr50;
@@ -112,16 +174,17 @@
non-removable;
no-sd;
no-sdio;
- st,dirpol;
- st,negedge;
+ st,neg-edge;
bus-width = <8>;
+ vmmc-supply = <&v3v3>;
+ vqmmc-supply = <&v3v3>;
+ mmc-ddr-3_3v;
status = "okay";
};
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&uart4_pins_a>;
- resets = <&rcc UART4_R>;
status = "okay";
};
@@ -157,6 +220,7 @@
/* CLOCK init */
&rcc {
+ secure-status = "disabled";
st,clksrc = <
CLK_MPU_PLL1P
CLK_AXI_PLL2P
@@ -186,7 +250,7 @@
CLK_FMC_ACLK
CLK_QSPI_ACLK
CLK_ETH_DISABLED
- CLK_SDMMC12_PLL3R
+ CLK_SDMMC12_PLL4P
CLK_DSI_DSIPLL
CLK_STGEN_HSE
CLK_USBPHY_HSE
@@ -195,7 +259,7 @@
CLK_SPI45_HSI
CLK_SPI6_HSI
CLK_I2C46_HSI
- CLK_SDMMC3_PLL3R
+ CLK_SDMMC3_PLL4P
CLK_USBO_USBPHY
CLK_ADC_CKPER
CLK_CEC_LSE
@@ -206,17 +270,17 @@
CLK_UART35_HSI
CLK_UART6_HSI
CLK_UART78_HSI
- CLK_SPDIF_PLL3Q
+ CLK_SPDIF_PLL4P
CLK_FDCAN_PLL4Q
CLK_SAI1_PLL3Q
CLK_SAI2_PLL3Q
CLK_SAI3_PLL3Q
CLK_SAI4_PLL3Q
- CLK_RNG1_CSI
- CLK_RNG2_CSI
+ CLK_RNG1_LSI
+ CLK_RNG2_LSI
CLK_LPTIM1_PCLK1
CLK_LPTIM23_PCLK3
- CLK_LPTIM45_PCLK3
+ CLK_LPTIM45_LSE
>;
/* VCO = 1300.0 MHz => P = 650 (CPU) */
@@ -231,15 +295,15 @@
frac = < 0x1400 >;
};
- /* VCO = 786.4 MHz => P = 197, Q = 49, R = 98 */
+ /* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
pll3: st,pll@2 {
- cfg = < 2 97 3 15 7 PQR(1,1,1) >;
- frac = < 0x9ba >;
+ cfg = < 1 33 1 16 36 PQR(1,1,1) >;
+ frac = < 0x1a04 >;
};
- /* VCO = 508.0 MHz => P = 56, Q = 56, R = 56 */
+ /* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */
pll4: st,pll@3 {
- cfg = < 5 126 8 8 8 PQR(1,1,1) >;
+ cfg = < 3 98 5 7 7 PQR(1,1,1) >;
};
};
diff --git a/fdts/stm32mp157c-ev1.dts b/fdts/stm32mp157c-ev1.dts
index 98a9d35..cfde8ed 100644
--- a/fdts/stm32mp157c-ev1.dts
+++ b/fdts/stm32mp157c-ev1.dts
@@ -3,23 +3,65 @@
* Copyright (C) STMicroelectronics 2017 - All Rights Reserved
* Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
*/
-
/dts-v1/;
+
#include "stm32mp157c-ed1.dts"
/ {
- model = "STMicroelectronics STM32MP157C-EV1 pmic eval daughter on eval mother";
+ model = "STMicroelectronics STM32MP157C eval daughter on eval mother";
compatible = "st,stm32mp157c-ev1", "st,stm32mp157c-ed1", "st,stm32mp157";
chosen {
- bootargs = "earlyprintk console=ttyS3,115200 root=/dev/ram";
- stdout-path = "serial3:115200n8";
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ serial1 = &usart3;
+ };
+};
+
+&fmc {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ nand: nand@0 {
+ reg = <0>;
+ nand-on-flash-bbt;
+ #address-cells = <1>;
+ #size-cells = <1>;
};
};
+&qspi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>;
+ reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ flash0: mx66l51235l@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <108000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ flash1: mx66l51235l@1 {
+ compatible = "jedec,spi-nor";
+ reg = <1>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <108000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
&usart3 {
pinctrl-names = "default";
pinctrl-0 = <&usart3_pins_a>;
- resets = <&rcc USART3_R>;
status = "disabled";
};
diff --git a/fdts/stm32mp157c.dtsi b/fdts/stm32mp157c.dtsi
index 8b13c0e..0ec7ecb 100644
--- a/fdts/stm32mp157c.dtsi
+++ b/fdts/stm32mp157c.dtsi
@@ -3,7 +3,7 @@
* Copyright (C) STMicroelectronics 2017 - All Rights Reserved
* Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
*/
-
+#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/stm32mp1-clks.h>
#include <dt-bindings/reset/stm32mp1-resets.h>
@@ -11,15 +11,12 @@
#address-cells = <1>;
#size-cells = <1>;
- aliases {
- serial0 = &usart1;
- serial1 = &usart2;
- serial2 = &usart3;
- serial3 = &uart4;
- serial4 = &uart5;
- serial5 = &usart6;
- serial6 = &uart7;
- serial7 = &uart8;
+ intc: interrupt-controller@a0021000 {
+ compatible = "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0xa0021000 0x1000>,
+ <0xa0022000 0x2000>;
};
clocks {
@@ -56,7 +53,7 @@
clk_i2s_ckin: i2s_ckin {
#clock-cells = <0>;
compatible = "fixed-clock";
- clock-frequency = <64000000>;
+ clock-frequency = <0>;
};
clk_dsi_phy: ck_dsi_phy {
@@ -64,31 +61,28 @@
compatible = "fixed-clock";
clock-frequency = <0>;
};
-
- clk_usbo_48m: ck_usbo_48m {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <48000000>;
- };
};
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
+ interrupt-parent = <&intc>;
ranges;
usart2: serial@4000e000 {
- compatible = "st,stm32h7-usart";
+ compatible = "st,stm32h7-uart";
reg = <0x4000e000 0x400>;
clocks = <&rcc USART2_K>;
+ resets = <&rcc USART2_R>;
status = "disabled";
};
usart3: serial@4000f000 {
- compatible = "st,stm32h7-usart";
+ compatible = "st,stm32h7-uart";
reg = <0x4000f000 0x400>;
clocks = <&rcc USART3_K>;
+ resets = <&rcc USART3_R>;
status = "disabled";
};
@@ -96,6 +90,7 @@
compatible = "st,stm32h7-uart";
reg = <0x40010000 0x400>;
clocks = <&rcc UART4_K>;
+ resets = <&rcc UART4_R>;
status = "disabled";
};
@@ -103,6 +98,7 @@
compatible = "st,stm32h7-uart";
reg = <0x40011000 0x400>;
clocks = <&rcc UART5_K>;
+ resets = <&rcc UART5_R>;
status = "disabled";
};
@@ -111,6 +107,7 @@
compatible = "st,stm32h7-uart";
reg = <0x40018000 0x400>;
clocks = <&rcc UART7_K>;
+ resets = <&rcc UART7_R>;
status = "disabled";
};
@@ -118,21 +115,23 @@
compatible = "st,stm32h7-uart";
reg = <0x40019000 0x400>;
clocks = <&rcc UART8_K>;
+ resets = <&rcc UART8_R>;
status = "disabled";
};
usart6: serial@44003000 {
- compatible = "st,stm32h7-usart";
+ compatible = "st,stm32h7-uart";
reg = <0x44003000 0x400>;
clocks = <&rcc USART6_K>;
+ resets = <&rcc USART6_R>;
status = "disabled";
};
sdmmc3: sdmmc@48004000 {
compatible = "st,stm32-sdmmc2";
reg = <0x48004000 0x400>, <0x48005000 0x400>;
- reg-names = "sdmmc", "delay";
clocks = <&rcc SDMMC3_K>;
+ clock-names = "apb_pclk";
resets = <&rcc SDMMC3_R>;
cap-sd-highspeed;
cap-mmc-highspeed;
@@ -141,19 +140,36 @@
};
rcc: rcc@50000000 {
- compatible = "syscon", "st,stm32mp1-rcc";
+ compatible = "st,stm32mp1-rcc", "syscon";
+ reg = <0x50000000 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
- reg = <0x50000000 0x1000>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
};
- rcc_reboot: rcc-reboot@50000000 {
- compatible = "syscon-reboot";
- regmap = <&rcc>;
- offset = <0x404>;
- mask = <0x1>;
+ pwr: pwr@50001000 {
+ compatible = "st,stm32mp1-pwr", "syscon", "simple-mfd";
+ reg = <0x50001000 0x400>;
};
+ exti: interrupt-controller@5000d000 {
+ compatible = "st,stm32mp1-exti", "syscon";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x5000d000 0x400>;
+
+ /* exti_pwr is an extra interrupt controller used for
+ * EXTI 55 to 60. It's mapped on pwr interrupt
+ * controller.
+ */
+ exti_pwr: exti-pwr {
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&pwr>;
+ st,irq-number = <6>;
+ };
+ };
+
rng1: rng@54003000 {
compatible = "st,stm32-rng";
reg = <0x54003000 0x400>;
@@ -162,13 +178,15 @@
status = "disabled";
};
- fmc_nand: fmc_nand@58002000 {
- compatible = "st,stm32mp1-fmc";
+ fmc: nand-controller@58002000 {
+ compatible = "st,stm32mp15-fmc2";
reg = <0x58002000 0x1000>,
- <0x80000000 0x40000>,
- <0x81000000 0x40000>,
- <0x88000000 0x40000>,
- <0x89000000 0x40000>;
+ <0x80000000 0x1000>,
+ <0x88010000 0x1000>,
+ <0x88020000 0x1000>,
+ <0x81000000 0x1000>,
+ <0x89010000 0x1000>,
+ <0x89020000 0x1000>;
clocks = <&rcc FMC_K>;
resets = <&rcc FMC_R>;
status = "disabled";
@@ -177,15 +195,17 @@
qspi: qspi@58003000 {
compatible = "st,stm32f469-qspi";
reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
+ reg-names = "qspi", "qspi_mm";
clocks = <&rcc QSPI_K>;
+ resets = <&rcc QSPI_R>;
status = "disabled";
};
sdmmc1: sdmmc@58005000 {
compatible = "st,stm32-sdmmc2";
reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
- reg-names = "sdmmc", "delay";
clocks = <&rcc SDMMC1_K>;
+ clock-names = "apb_pclk";
resets = <&rcc SDMMC1_R>;
cap-sd-highspeed;
cap-mmc-highspeed;
@@ -196,8 +216,8 @@
sdmmc2: sdmmc@58007000 {
compatible = "st,stm32-sdmmc2";
reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
- reg-names = "sdmmc", "delay";
clocks = <&rcc SDMMC2_K>;
+ clock-names = "apb_pclk";
resets = <&rcc SDMMC2_R>;
cap-sd-highspeed;
cap-mmc-highspeed;
@@ -205,7 +225,7 @@
status = "disabled";
};
- iwdg2: iwdg@5a002000 {
+ iwdg2: watchdog@5a002000 {
compatible = "st,stm32mp1-iwdg";
reg = <0x5a002000 0x400>;
clocks = <&rcc IWDG2>, <&rcc CK_LSI>;
@@ -214,15 +234,34 @@
};
usart1: serial@5c000000 {
- compatible = "st,stm32h7-usart";
+ compatible = "st,stm32h7-uart";
reg = <0x5c000000 0x400>;
+ interrupt-names = "event", "wakeup";
+ interrupts-extended = <&intc GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+ <&exti 26 1>;
clocks = <&rcc USART1_K>;
+ resets = <&rcc USART1_R>;
status = "disabled";
};
+ spi6: spi@5c001000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32h7-spi";
+ reg = <0x5c001000 0x400>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SPI6_K>;
+ resets = <&rcc SPI6_R>;
+ status = "disabled";
+ };
+
i2c4: i2c@5c002000 {
compatible = "st,stm32f7-i2c";
reg = <0x5c002000 0x400>;
+ interrupt-names = "event", "error", "wakeup";
+ interrupts-extended = <&intc GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+ <&exti 24 1>;
clocks = <&rcc I2C4_K>;
resets = <&rcc I2C4_R>;
#address-cells = <1>;
@@ -235,6 +274,36 @@
reg = <0x5c004000 0x400>;
clocks = <&rcc RTCAPB>, <&rcc RTC>;
clock-names = "pclk", "rtc_ck";
+ interrupts-extended = <&intc GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <&exti 19 1>;
+ status = "disabled";
+ };
+
+ bsec: nvmem@5c005000 {
+ compatible = "st,stm32mp15-bsec";
+ reg = <0x5c005000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ts_cal1: calib@5c {
+ reg = <0x5c 0x2>;
+ };
+ ts_cal2: calib@5e {
+ reg = <0x5e 0x2>;
+ };
+ };
+
+ i2c6: i2c@5c009000 {
+ compatible = "st,stm32f7-i2c";
+ reg = <0x5c009000 0x400>;
+ interrupt-names = "event", "error", "wakeup";
+ interrupts-extended = <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <&exti 54 1>;
+ clocks = <&rcc I2C6_K>;
+ resets = <&rcc I2C6_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
};
};
};
diff --git a/fdts/stm32mp157caa-pinctrl.dtsi b/fdts/stm32mp157caa-pinctrl.dtsi
index 774561a..9b9cd08 100644
--- a/fdts/stm32mp157caa-pinctrl.dtsi
+++ b/fdts/stm32mp157caa-pinctrl.dtsi
@@ -7,8 +7,8 @@
#include "stm32mp157-pinctrl.dtsi"
/ {
soc {
- pinctrl: pin-controller {
- compatible = "st,stm32mp157caa-pinctrl";
+ pinctrl: pin-controller@50002000 {
+ st,package = <STM32MP157CAA>;
gpioa: gpio@50002000 {
status = "okay";
@@ -77,8 +77,8 @@
};
};
- pinctrl_z: pin-controller-z {
- compatible = "st,stm32mp157caa-z-pinctrl";
+ pinctrl_z: pin-controller-z@54004000 {
+ st,package = <STM32MP157CAA>;
gpioz: gpio@54004000 {
status = "okay";