blob: e019cffccc8224916c9fd86421e1c4f08d683f50 [file] [log] [blame]
/*
* Copyright (c) 2017-2018, STMicroelectronics - All Rights Reserved
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef __BOOT_API_H
#define __BOOT_API_H
#include <stdint.h>
#include <stdio.h>
/*
* Possible value of boot context field 'boot_interface_sel'
*/
/* Value of field 'boot_interface_sel' when no boot occurred */
#define BOOT_API_CTX_BOOT_INTERFACE_SEL_NO 0x0U
/* Boot occurred on SD */
#define BOOT_API_CTX_BOOT_INTERFACE_SEL_FLASH_SD 0x1U
/* Boot occurred on EMMC */
#define BOOT_API_CTX_BOOT_INTERFACE_SEL_FLASH_EMMC 0x2U
/**
* @brief Possible value of boot context field 'EmmcXferStatus'
*/
/*
* Possible value of boot context field 'emmc_xfer_status'
*/
#define BOOT_API_CTX_EMMC_XFER_STATUS_NOT_STARTED 0x0U
#define BOOT_API_CTX_EMMC_XFER_STATUS_DATAEND_DETECTED 0x1U
#define BOOT_API_CTX_EMMC_XFER_STATUS_XFER_OVERALL_TIMEOUT_DETECTED 0x2U
#define BOOT_API_CTX_EMMC_XFER_STATUS_XFER_DATA_TIMEOUT 0x3U
/*
* Possible value of boot context field 'emmc_error_status'
*/
#define BOOT_API_CTX_EMMC_ERROR_STATUS_NONE 0x0U
#define BOOT_API_CTX_EMMC_ERROR_STATUS_CMD_TIMEOUT 0x1U
#define BOOT_API_CTX_EMMC_ERROR_STATUS_ACK_TIMEOUT 0x2U
#define BOOT_API_CTX_EMMC_ERROR_STATUS_DATA_CRC_FAIL 0x3U
#define BOOT_API_CTX_EMMC_ERROR_STATUS_NOT_ENOUGH_BOOT_DATA_RX 0x4U
#define BOOT_API_CTX_EMMC_ERROR_STATUS_HEADER_NOT_FOUND 0x5U
#define BOOT_API_CTX_EMMC_ERROR_STATUS_HEADER_SIZE_ZERO 0x6U
#define BOOT_API_CTX_EMMC_ERROR_STATUS_IMAGE_NOT_COMPLETE 0x7U
/* Image Header related definitions */
/* Definition of header version */
#define BOOT_API_HEADER_VERSION 0x00010000U
/*
* Magic number used to detect header in memory
* Its value must be 'S' 'T' 'M' 0x32, i.e 0x324D5453 as field
* 'bootapi_image_header_t.magic'
* This identifies the start of a boot image.
*/
#define BOOT_API_IMAGE_HEADER_MAGIC_NB 0x324D5453U
/* Definitions related to Authentication used in image header structure */
#define BOOT_API_ECDSA_PUB_KEY_LEN_IN_BYTES 64
#define BOOT_API_ECDSA_SIGNATURE_LEN_IN_BYTES 64
#define BOOT_API_SHA256_DIGEST_SIZE_IN_BYTES 32
/* Possible values of the field 'boot_api_image_header_t.ecc_algo_type' */
#define BOOT_API_ECDSA_ALGO_TYPE_P256NIST 1
#define BOOT_API_ECDSA_ALGO_TYPE_BRAINPOOL256 2
/*
* Cores secure magic numbers
* Constant to be stored in bakcup register
* BOOT_API_MAGIC_NUMBER_TAMP_BCK_REG_IDX
*/
#define BOOT_API_A7_CORE0_MAGIC_NUMBER 0xCA7FACE0U
#define BOOT_API_A7_CORE1_MAGIC_NUMBER 0xCA7FACE1U
/*
* TAMP_BCK4R register index
* This register is used to write a Magic Number in order to restart
* Cortex A7 Core 1 and make it execute @ branch address from TAMP_BCK5R
*/
#define BOOT_API_CORE1_MAGIC_NUMBER_TAMP_BCK_REG_IDX 4U
/*
* TAMP_BCK5R register index
* This register is used to contain the branch address of
* Cortex A7 Core 1 when restarted by a TAMP_BCK4R magic number writing
*/
#define BOOT_API_CORE1_BRANCH_ADDRESS_TAMP_BCK_REG_IDX 5U
/*
* Possible value of boot context field 'hse_clock_value_in_hz'
*/
#define BOOT_API_CTX_HSE_CLOCK_VALUE_UNDEFINED 0U
#define BOOT_API_CTX_HSE_CLOCK_VALUE_24_MHZ 24000000U
#define BOOT_API_CTX_HSE_CLOCK_VALUE_25_MHZ 25000000U
#define BOOT_API_CTX_HSE_CLOCK_VALUE_26_MHZ 26000000U
/*
* Possible value of boot context field 'boot_partition_used_toboot'
*/
#define BOOT_API_CTX_BOOT_PARTITION_UNDEFINED 0U
/* Used FSBL1 to boot */
#define BOOT_API_CTX_BOOT_PARTITION_FSBL1 1U
/* Used FSBL2 to boot */
#define BOOT_API_CTX_BOOT_PARTITION_FSBL2 2U
/* OTP_CFG0 */
#define BOOT_API_OTP_MODE_WORD_NB 0
/* Closed = OTP_CFG0[6] */
#define BOOT_API_OTP_MODE_CLOSED_BIT_POS 6
/*
* Boot Context related definitions
*/
/*
* Boot core boot configuration structure
* Specifies all items of the cold boot configuration
* Memory and peripheral part.
*/
typedef struct {
/*
* Boot interface used to boot : take values from defines
* BOOT_API_CTX_BOOT_INTERFACE_SEL_XXX above
*/
uint16_t boot_interface_selected;
uint16_t boot_interface_instance;
uint32_t reserved1[13];
uint32_t otp_afmux_values[3];
uint32_t reserved[9];
/*
* Information specific to an SD boot
* Updated each time an SD boot is at least attempted,
* even if not successful
* Note : This is useful to understand why an SD boot failed
* in particular
*/
uint32_t sd_err_internal_timeout_cnt;
uint32_t sd_err_dcrc_fail_cnt;
uint32_t sd_err_dtimeout_cnt;
uint32_t sd_err_ctimeout_cnt;
uint32_t sd_err_ccrc_fail_cnt;
uint32_t sd_overall_retry_cnt;
/*
* Information specific to an eMMC boot
* Updated each time an eMMC boot is at least attempted,
* even if not successful
* Note : This is useful to understand why an eMMC boot failed
* in particular
*/
uint32_t emmc_xfer_status;
uint32_t emmc_error_status;
uint32_t emmc_nbbytes_rxcopied_tosysram_download_area;
uint32_t hse_clock_value_in_hz;
/*
* Boot partition :
* ie FSBL partition on which the boot was successful
*/
uint32_t boot_partition_used_toboot;
} __packed boot_api_context_t;
/*
* Image Header related definitions
*/
/*
* Structure used to define the common Header format used for FSBL, xloader,
* ... and in particular used by bootROM for FSBL header readout.
* FSBL header size is 256 Bytes = 0x100
*/
typedef struct {
/* BOOT_API_IMAGE_HEADER_MAGIC_NB */
uint32_t magic;
uint8_t image_signature[BOOT_API_ECDSA_SIGNATURE_LEN_IN_BYTES];
/*
* Checksum of payload
* 32-bit sum all all payload bytes considered as 8 bit unigned numbers,
* discarding any overflow bits.
* Use to check UART/USB downloaded image integrity when signature
* is not used (i.e bit 0 : 'No_sig_check' = 1 in option flags)
*/
uint32_t payload_checksum;
/* Image header version : should have value BOOT_API_HEADER_VERSION */
uint32_t header_version;
/* Image length in bytes */
uint32_t image_length;
/*
* Image Entry point address : should be in the SYSRAM area
* and at least within the download area range
*/
uint32_t image_entry_point;
/* Reserved */
uint32_t reserved1;
/*
* Image load address : not used by bootROM but to be consistent
* with header format for other packages (xloader, ...)
*/
uint32_t load_address;
/* Reserved */
uint32_t reserved2;
/* Image version to be compared by bootROM with monotonic
* counter value in OTP_CFG4 prior executing the downloaded image
*/
uint32_t image_version;
/*
* Option flags:
* Bit 0 : No signature check request : 'No_sig_check'
* value 1 : for No signature check request
* value 0 : No request to bypass the signature check
* Note : No signature check is never allowed on a Secured chip
*/
uint32_t option_flags;
/*
* Type of ECC algorithm to use :
* value 1 : for P-256 NIST algorithm
* value 2 : for Brainpool 256 algorithm
* See definitions 'BOOT_API_ECDSA_ALGO_TYPE_XXX' above.
*/
uint32_t ecc_algo_type;
/*
* OEM ECC Public Key (aka Root pubk) provided in header on 512 bits.
* The SHA-256 hash of the OEM ECC pubk must match the one stored
* in OTP cells.
*/
uint8_t ecc_pubk[BOOT_API_ECDSA_PUB_KEY_LEN_IN_BYTES];
/* Pad up to 256 byte total size */
uint8_t pad[83];
/* Add binary type information */
uint8_t binary_type;
} __packed boot_api_image_header_t;
#endif /* __BOOT_API_H */