| Description |
| =========== |
| |
| Poplar is the first development board compliant with the 96Boards Enterprise |
| Edition TV Platform specification. |
| |
| The board features the Hi3798C V200 with an integrated quad-core 64-bit |
| Arm Cortex A53 processor and high performance Mali T720 GPU, making it capable |
| of running any commercial set-top solution based on Linux or Android. |
| |
| It supports a premium user experience with up to H.265 HEVC decoding of 4K |
| video at 60 frames per second. |
| |
| :: |
| |
| SOC Hisilicon Hi3798CV200 |
| CPU Quad-core Arm Cortex-A53 64 bit |
| DRAM DDR3/3L/4 SDRAM interface, maximum 32-bit data width 2 GB |
| USB Two USB 2.0 ports One USB 3.0 ports |
| CONSOLE USB-micro port for console support |
| ETHERNET 1 GBe Ethernet |
| PCIE One PCIe 2.0 interfaces |
| JTAG 8-Pin JTAG |
| EXPANSION INTERFACE Linaro 96Boards Low Speed Expansion slot |
| DIMENSION Standard 160×120 mm 96Boards Enterprice Edition form factor |
| WIFI 802.11AC 2*2 with Bluetooth |
| CONNECTORS One connector for Smart Card One connector for TSI |
| |
| At the start of the boot sequence, the bootROM executes the so called l-loader |
| binary whose main role is to change the processor state to 64bit mode. This |
| must happen prior to invoking Trusted Firmware-A: |
| |
| :: |
| |
| l-loader --> Trusted Firmware-A --> u-boot |
| |
| How to build |
| ============ |
| |
| Code Locations |
| -------------- |
| |
| - Trusted Firmware-A: |
| `link <https://github.com/ARM-software/arm-trusted-firmware>`__ |
| |
| - l-loader: |
| `link <https://github.com/Linaro/poplar-l-loader.git>`__ |
| |
| - u-boot: |
| `link <http://git.denx.de/u-boot.git>`__ |
| |
| Build Procedure |
| --------------- |
| |
| - Fetch all the above 3 repositories into local host. |
| Make all the repositories in the same ${BUILD\_PATH}. |
| |
| - Prepare the AARCH64 toolchain. |
| |
| - Build u-boot using poplar_defconfig |
| |
| .. code:: bash |
| |
| make CROSS_COMPILE=aarch64-linux-gnu- poplar_defconfig |
| make CROSS_COMPILE=aarch64-linux-gnu- |
| |
| - Build atf providing the previously generated u-boot.bin as the BL33 image |
| |
| .. code:: bash |
| |
| make CROSS_COMPILE=aarch64-linux-gnu- all fip SPD=none PLAT=poplar |
| BL33=u-boot.bin |
| |
| - Build l-loader (generated the final fastboot.bin) |
| 1. copy the atf generated files fip.bin and bl1.bin to l-loader/atf/ |
| 2. export ARM_TRUSTED_FIRMWARE=${ATF_SOURCE_PATH) |
| 3. make |
| |
| Install Procedure |
| ----------------- |
| |
| - Copy l-loader/fastboot.bin to a FAT partition on a USB pen drive. |
| |
| - Plug the USB pen drive to any of the USB2 ports |
| |
| - Power the board while keeping S3 pressed (usb_boot) |
| |
| The system will boot into a u-boot shell which you can then use to write the |
| working firmware to eMMC. |
| |
| Boot trace |
| ========== |
| |
| :: |
| |
| Bootrom start |
| Boot Media: eMMC |
| Decrypt auxiliary code ...OK |
| |
| lsadc voltage min: 000000FE, max: 000000FF, aver: 000000FE, index: 00000000 |
| |
| Entry boot auxiliary code |
| |
| Auxiliary code - v1.00 |
| DDR code - V1.1.2 20160205 |
| Build: Mar 24 2016 - 17:09:44 |
| Reg Version: v134 |
| Reg Time: 2016/03/18 09:44:55 |
| Reg Name: hi3798cv2dmb_hi3798cv200_ddr3_2gbyte_8bitx4_4layers.reg |
| |
| Boot auxiliary code success |
| Bootrom success |
| |
| LOADER: Switched to aarch64 mode |
| LOADER: Entering ARM TRUSTED FIRMWARE |
| LOADER: CPU0 executes at 0x000ce000 |
| |
| INFO: BL1: 0xe1000 - 0xe7000 [size = 24576] |
| NOTICE: Booting Trusted Firmware |
| NOTICE: BL1: v1.3(debug):v1.3-372-g1ba9c60 |
| NOTICE: BL1: Built : 17:51:33, Apr 30 2017 |
| INFO: BL1: RAM 0xe1000 - 0xe7000 |
| INFO: BL1: Loading BL2 |
| INFO: Loading image id=1 at address 0xe9000 |
| INFO: Image id=1 loaded at address 0xe9000, size = 0x5008 |
| NOTICE: BL1: Booting BL2 |
| INFO: Entry point address = 0xe9000 |
| INFO: SPSR = 0x3c5 |
| NOTICE: BL2: v1.3(debug):v1.3-372-g1ba9c60 |
| NOTICE: BL2: Built : 17:51:33, Apr 30 2017 |
| INFO: BL2: Loading BL31 |
| INFO: Loading image id=3 at address 0x129000 |
| INFO: Image id=3 loaded at address 0x129000, size = 0x8038 |
| INFO: BL2: Loading BL33 |
| INFO: Loading image id=5 at address 0x37000000 |
| INFO: Image id=5 loaded at address 0x37000000, size = 0x58f17 |
| NOTICE: BL1: Booting BL31 |
| INFO: Entry point address = 0x129000 |
| INFO: SPSR = 0x3cd |
| INFO: Boot bl33 from 0x37000000 for 364311 Bytes |
| NOTICE: BL31: v1.3(debug):v1.3-372-g1ba9c60 |
| NOTICE: BL31: Built : 17:51:33, Apr 30 2017 |
| INFO: BL31: Initializing runtime services |
| INFO: BL31: Preparing for EL3 exit to normal world |
| INFO: Entry point address = 0x37000000 |
| INFO: SPSR = 0x3c9 |
| |
| |
| U-Boot 2017.05-rc2-00130-gd2255b0 (Apr 30 2017 - 17:51:28 +0200)poplar |
| |
| Model: HiSilicon Poplar Development Board |
| BOARD: Hisilicon HI3798cv200 Poplar |
| DRAM: 1 GiB |
| MMC: Hisilicon DWMMC: 0 |
| In: serial@f8b00000 |
| Out: serial@f8b00000 |
| Err: serial@f8b00000 |
| Net: Net Initialization Skipped |
| No ethernet found. |
| |
| Hit any key to stop autoboot: 0 |
| starting USB... |
| USB0: USB EHCI 1.00 |
| scanning bus 0 for devices... 1 USB Device(s) found |
| USB1: USB EHCI 1.00 |
| scanning bus 1 for devices... 4 USB Device(s) found |
| scanning usb for storage devices... 1 Storage Device(s) found |
| scanning usb for ethernet devices... 1 Ethernet Device(s) found |
| |
| USB device 0: |
| Device 0: Vendor: SanDisk Rev: 1.00 Prod: Cruzer Blade |
| Type: Removable Hard Disk |
| Capacity: 7632.0 MB = 7.4 GB (15630336 x 512) |
| ... is now current device |
| Scanning usb 0:1... |
| => |