blob: 1b3c447ae55c1b46702fb1d6d9fd5b8eadda2a8f [file] [log] [blame]
/*
* Copyright 2017-2021 NXP
*
* SPDX-License-Identifier: BSD-3-Clause
*
*/
#ifndef _JR_DRIVER_CONFIG_H_
#define _JR_DRIVER_CONFIG_H_
/* Helper defines */
/* Define used for setting a flag on */
#define ON 1
/* Define used for setting a flag off */
#define OFF 0
/* SEC is configured to start work in polling mode, */
#define SEC_STARTUP_POLLING_MODE 0
/*
* SEC is configured to start work in interrupt mode,
* when configured for NAPI notification style.
*/
#define SEC_STARTUP_INTERRUPT_MODE 1
/*
* SEC driver will use ONLY interrupts to receive notifications
* for processed packets from SEC engine hardware.
*/
#define SEC_NOTIFICATION_TYPE_IRQ 1
/*
* SEC driver will use ONLY polling to receive notifications
* for processed packets from SEC engine hardware.
*/
#define SEC_NOTIFICATION_TYPE_POLL 2
/*
* Determines how SEC user space driver will receive notifications
* for processed packets from SEC engine.
* Valid values are: #SEC_NOTIFICATION_TYPE_POLL, #SEC_NOTIFICATION_TYPE_IRQ
*/
#define SEC_NOTIFICATION_TYPE SEC_NOTIFICATION_TYPE_POLL
/* Maximum number of job rings supported by SEC hardware */
#define MAX_SEC_JOB_RINGS 1
/*
* Size of cryptographic context that is used directly in communicating
* with SEC device.
* SEC device works only with physical addresses. This is the maximum size
* for a SEC descriptor ( = 64 words).
*/
#define SEC_CRYPTO_DESCRIPTOR_SIZE 256
/*
* Size of job descriptor submitted to SEC device for each packet to be
* processed.
* Job descriptor contains 3 DMA address pointers:
* - to shared descriptor, to input buffer and to output buffer.
* The job descriptor contains other SEC specific commands as well:
* - HEADER command, SEQ IN PTR command SEQ OUT PTR command and opaque
* data, each measuring 4 bytes.
* Job descriptor size, depending on physical address representation:
* - 32 bit - size is 28 bytes - cacheline-aligned size is 64 bytes
* - 36 bit - size is 40 bytes - cacheline-aligned size is 64 bytes
* @note: Job descriptor must be cacheline-aligned to ensure efficient memory
* access.
* @note: If other format is used for job descriptor, then the size must be
* revised.
*/
#define SEC_JOB_DESCRIPTOR_SIZE 64
/*
* Size of one entry in the input ring of a job ring.
* Input ring contains pointers to job descriptors.
* The memory used for an input ring and output ring must be physically
* contiguous.
*/
#define SEC_JOB_INPUT_RING_ENTRY_SIZE sizeof(phys_addr_t)
/*
* Size of one entry in the output ring of a job ring.
* Output ring entry is a pointer to a job descriptor followed by a 4 byte
* status word.
* The memory used for an input ring and output ring must be physically
* contiguous.
* @note If desired to use also the optional SEQ OUT indication in output
* ring entries, then 4 more bytes must be added to the size.
*/
#define SEC_JOB_OUTPUT_RING_ENTRY_SIZE (SEC_JOB_INPUT_RING_ENTRY_SIZE + 4)
/* DMA memory required for an input ring of a job ring. */
#define SEC_DMA_MEM_INPUT_RING_SIZE \
((SEC_JOB_INPUT_RING_ENTRY_SIZE) * (SEC_JOB_RING_SIZE))
/*
* DMA memory required for an output ring of a job ring.
* Required extra 4 byte for status word per each entry.
*/
#define SEC_DMA_MEM_OUTPUT_RING_SIZE \
((SEC_JOB_OUTPUT_RING_ENTRY_SIZE) * (SEC_JOB_RING_SIZE))
/* DMA memory required for descriptors of a job ring. */
#define SEC_DMA_MEM_DESCRIPTORS \
((SEC_CRYPTO_DESCRIPTOR_SIZE)*(SEC_JOB_RING_SIZE))
/* DMA memory required for a job ring, including both input output rings. */
#define SEC_DMA_MEM_JOB_RING_SIZE \
((SEC_DMA_MEM_INPUT_RING_SIZE) + \
(SEC_DMA_MEM_OUTPUT_RING_SIZE))
/*
* When calling sec_init() UA will provide an area of virtual memory
* of size #SEC_DMA_MEMORY_SIZE to be used internally by the driver
* to allocate data (like SEC descriptors) that needs to be passed to
* SEC device in physical addressing and later on retrieved from SEC device.
* At initialization the UA provides specialized ptov/vtop functions/macros to
* translate addresses allocated from this memory area.
*/
#define SEC_DMA_MEMORY_SIZE \
((SEC_DMA_MEM_JOB_RING_SIZE) * (MAX_SEC_JOB_RINGS))
/*
* SEC DEVICE related configuration.
* Enable/Disable logging support at compile time.
* Valid values:
* ON - enable logging
* OFF - disable logging
* The messages are logged at stdout.
*/
#define SEC_DRIVER_LOGGING OFF
/*
* Configure logging level at compile time.
* Valid values:
* SEC_DRIVER_LOG_ERROR - log only errors
* SEC_DRIVER_LOG_INFO - log errors and info messages
* SEC_DRIVER_LOG_DEBUG - log errors, info and debug messages
*/
#define SEC_DRIVER_LOGGING_LEVEL SEC_DRIVER_LOG_DEBUG
/*
* SEC JOB RING related configuration.
* Configure the size of the JOB RING.
* The maximum size of the ring is hardware limited to 1024.
* However the number of packets in flight in a time interval of
* 1ms can be calculated
* from the traffic rate (Mbps) and packet size.
* Here it was considered a packet size of 40 bytes.
* @note Round up to nearest power of 2 for optimized update
* of producer/consumer indexes of each job ring
* \todo Should set to 750, according to the calculation above, but
* the JR size must be power of 2, thus the next closest value must
* be chosen (i.e. 512 since 1024 is not available)
* For firmware choose this to be 16
*/
#define SEC_JOB_RING_SIZE 16
/*
* Interrupt coalescing related configuration.
* NOTE: SEC hardware enabled interrupt
* coalescing is not supported on SEC version 3.1!
* SEC version 4.4 has support for interrupt
* coalescing.
*/
#if SEC_NOTIFICATION_TYPE != SEC_NOTIFICATION_TYPE_POLL
#define SEC_INT_COALESCING_ENABLE ON
/*
* Interrupt Coalescing Descriptor Count Threshold.
* While interrupt coalescing is enabled (ICEN=1), this value determines
* how many Descriptors are completed before raising an interrupt.
* Valid values for this field are from 0 to 255.
* Note that a value of 1 functionally defeats the advantages of interrupt
* coalescing since the threshold value is reached each time that a
* Job Descriptor is completed. A value of 0 is treated in the same
* manner as a value of 1.
*
*/
#define SEC_INTERRUPT_COALESCING_DESCRIPTOR_COUNT_THRESH 10
/*
* Interrupt Coalescing Timer Threshold.
* While interrupt coalescing is enabled (ICEN=1), this value determines the
* maximum amount of time after processing a Descriptor before raising an
* interrupt.
* The threshold value is represented in units equal to 64 CAAM interface
* clocks. Valid values for this field are from 1 to 65535.
* A value of 0 results in behavior identical to that when interrupt
* coalescing is disabled.
*/
#define SEC_INTERRUPT_COALESCING_TIMER_THRESH 100
#endif /* SEC_NOTIFICATION_TYPE_POLL */
#endif /* _JR_DRIVER_CONFIG_H_ */