drivers/arm/gic/v3/gicv3_helpers.c - filogic/atf - Gitiles

 /*
  * Copyright (c) 2015-2016, ARM Limited and Contributors. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
  *
  * Redistributions of source code must retain the above copyright notice, this
  * list of conditions and the following disclaimer.
  *
  * Redistributions in binary form must reproduce the above copyright notice,
  * this list of conditions and the following disclaimer in the documentation
  * and/or other materials provided with the distribution.
  *
  * Neither the name of ARM nor the names of its contributors may be used
  * to endorse or promote products derived from this software without specific
  * prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  * POSSIBILITY OF SUCH DAMAGE.
  */

 #include <arch.h>
 #include <arch_helpers.h>
 #include <assert.h>
 #include <debug.h>
 #include <gic_common.h>
 #include "../common/gic_common_private.h"
 #include "gicv3_private.h"

 /*
  * Accessor to read the GIC Distributor IGRPMODR corresponding to the
  * interrupt `id`, 32 interrupt IDs at a time.
  */
 unsigned int gicd_read_igrpmodr(uintptr_t base, unsigned int id)
 {
 	unsigned n = id >> IGRPMODR_SHIFT;
 	return mmio_read_32(base + GICD_IGRPMODR + (n << 2));
 }

 /*
  * Accessor to write the GIC Distributor IGRPMODR corresponding to the
  * interrupt `id`, 32 interrupt IDs at a time.
  */
 void gicd_write_igrpmodr(uintptr_t base, unsigned int id, unsigned int val)
 {
 	unsigned n = id >> IGRPMODR_SHIFT;
 	mmio_write_32(base + GICD_IGRPMODR + (n << 2), val);
 }

 /*
  * Accessor to get the bit corresponding to interrupt ID
  * in GIC Distributor IGRPMODR.
  */
 unsigned int gicd_get_igrpmodr(uintptr_t base, unsigned int id)
 {
 	unsigned bit_num = id & ((1 << IGRPMODR_SHIFT) - 1);
 	unsigned int reg_val = gicd_read_igrpmodr(base, id);

 	return (reg_val >> bit_num) & 0x1;
 }

 /*
  * Accessor to set the bit corresponding to interrupt ID
  * in GIC Distributor IGRPMODR.
  */
 void gicd_set_igrpmodr(uintptr_t base, unsigned int id)
 {
 	unsigned bit_num = id & ((1 << IGRPMODR_SHIFT) - 1);
 	unsigned int reg_val = gicd_read_igrpmodr(base, id);

 	gicd_write_igrpmodr(base, id, reg_val | (1 << bit_num));
 }

 /*
  * Accessor to clear the bit corresponding to interrupt ID
  * in GIC Distributor IGRPMODR.
  */
 void gicd_clr_igrpmodr(uintptr_t base, unsigned int id)
 {
 	unsigned bit_num = id & ((1 << IGRPMODR_SHIFT) - 1);
 	unsigned int reg_val = gicd_read_igrpmodr(base, id);

 	gicd_write_igrpmodr(base, id, reg_val & ~(1 << bit_num));
 }

 /*
  * Accessor to read the GIC Re-distributor IPRIORITYR corresponding to the
  * interrupt `id`, 4 interrupts IDs at a time.
  */
 unsigned int gicr_read_ipriorityr(uintptr_t base, unsigned int id)
 {
 	unsigned n = id >> IPRIORITYR_SHIFT;
 	return mmio_read_32(base + GICR_IPRIORITYR + (n << 2));
 }

 /*
  * Accessor to write the GIC Re-distributor IPRIORITYR corresponding to the
  * interrupt `id`, 4 interrupts IDs at a time.
  */
 void gicr_write_ipriorityr(uintptr_t base, unsigned int id, unsigned int val)
 {
 	unsigned n = id >> IPRIORITYR_SHIFT;
 	mmio_write_32(base + GICR_IPRIORITYR + (n << 2), val);
 }

 /*
  * Accessor to get the bit corresponding to interrupt ID
  * from GIC Re-distributor IGROUPR0.
  */
 unsigned int gicr_get_igroupr0(uintptr_t base, unsigned int id)
 {
 	unsigned bit_num = id & ((1 << IGROUPR_SHIFT) - 1);
 	unsigned int reg_val = gicr_read_igroupr0(base);

 	return (reg_val >> bit_num) & 0x1;
 }

 /*
  * Accessor to set the bit corresponding to interrupt ID
  * in GIC Re-distributor IGROUPR0.
  */
 void gicr_set_igroupr0(uintptr_t base, unsigned int id)
 {
 	unsigned bit_num = id & ((1 << IGROUPR_SHIFT) - 1);
 	unsigned int reg_val = gicr_read_igroupr0(base);

 	gicr_write_igroupr0(base, reg_val | (1 << bit_num));
 }

 /*
  * Accessor to clear the bit corresponding to interrupt ID
  * in GIC Re-distributor IGROUPR0.
  */
 void gicr_clr_igroupr0(uintptr_t base, unsigned int id)
 {
 	unsigned bit_num = id & ((1 << IGROUPR_SHIFT) - 1);
 	unsigned int reg_val = gicr_read_igroupr0(base);

 	gicr_write_igroupr0(base, reg_val & ~(1 << bit_num));
 }

 /*
  * Accessor to get the bit corresponding to interrupt ID
  * from GIC Re-distributor IGRPMODR0.
  */
 unsigned int gicr_get_igrpmodr0(uintptr_t base, unsigned int id)
 {
 	unsigned bit_num = id & ((1 << IGRPMODR_SHIFT) - 1);
 	unsigned int reg_val = gicr_read_igrpmodr0(base);

 	return (reg_val >> bit_num) & 0x1;
 }

 /*
  * Accessor to set the bit corresponding to interrupt ID
  * in GIC Re-distributor IGRPMODR0.
  */
 void gicr_set_igrpmodr0(uintptr_t base, unsigned int id)
 {
 	unsigned bit_num = id & ((1 << IGRPMODR_SHIFT) - 1);
 	unsigned int reg_val = gicr_read_igrpmodr0(base);

 	gicr_write_igrpmodr0(base, reg_val | (1 << bit_num));
 }

 /*
  * Accessor to clear the bit corresponding to interrupt ID
  * in GIC Re-distributor IGRPMODR0.
  */
 void gicr_clr_igrpmodr0(uintptr_t base, unsigned int id)
 {
 	unsigned bit_num = id & ((1 << IGRPMODR_SHIFT) - 1);
 	unsigned int reg_val = gicr_read_igrpmodr0(base);

 	gicr_write_igrpmodr0(base, reg_val & ~(1 << bit_num));
 }

 /*
  * Accessor to set the bit corresponding to interrupt ID
  * in GIC Re-distributor ISENABLER0.
  */
 void gicr_set_isenabler0(uintptr_t base, unsigned int id)
 {
 	unsigned bit_num = id & ((1 << ISENABLER_SHIFT) - 1);

 	gicr_write_isenabler0(base, (1 << bit_num));
 }

 /*
  * Accessor to set the byte corresponding to interrupt ID
  * in GIC Re-distributor IPRIORITYR.
  */
 void gicr_set_ipriorityr(uintptr_t base, unsigned int id, unsigned int pri)
 {
 	mmio_write_8(base + GICR_IPRIORITYR + id, pri & GIC_PRI_MASK);
 }

 /******************************************************************************
  * This function marks the core as awake in the re-distributor and
  * ensures that the interface is active.
  *****************************************************************************/
 void gicv3_rdistif_mark_core_awake(uintptr_t gicr_base)
 {
 	/*
 	 * The WAKER_PS_BIT should be changed to 0
 	 * only when WAKER_CA_BIT is 1.
 	 */
 	assert(gicr_read_waker(gicr_base) & WAKER_CA_BIT);

 	/* Mark the connected core as awake */
 	gicr_write_waker(gicr_base, gicr_read_waker(gicr_base) & ~WAKER_PS_BIT);

 	/* Wait till the WAKER_CA_BIT changes to 0 */
 	while (gicr_read_waker(gicr_base) & WAKER_CA_BIT)
 		;
 }


 /******************************************************************************
  * This function marks the core as asleep in the re-distributor and ensures
  * that the interface is quiescent.
  *****************************************************************************/
 void gicv3_rdistif_mark_core_asleep(uintptr_t gicr_base)
 {
 	/* Mark the connected core as asleep */
 	gicr_write_waker(gicr_base, gicr_read_waker(gicr_base) | WAKER_PS_BIT);

 	/* Wait till the WAKER_CA_BIT changes to 1 */
 	while (!(gicr_read_waker(gicr_base) & WAKER_CA_BIT))
 		;
 }


 /*******************************************************************************
  * This function probes the Redistributor frames when the driver is initialised
  * and saves their base addresses. These base addresses are used later to
  * initialise each Redistributor interface.
  ******************************************************************************/
 void gicv3_rdistif_base_addrs_probe(uintptr_t *rdistif_base_addrs,
 					unsigned int rdistif_num,
 					uintptr_t gicr_base,
 					mpidr_hash_fn mpidr_to_core_pos)
 {
 	u_register_t mpidr;
 	unsigned int proc_num;
 	unsigned long long typer_val;
 	uintptr_t rdistif_base = gicr_base;

 	assert(rdistif_base_addrs);

 	/*
 	 * Iterate over the Redistributor frames. Store the base address of each
 	 * frame in the platform provided array. Use the "Processor Number"
 	 * field to index into the array if the platform has not provided a hash
 	 * function to convert an MPIDR (obtained from the "Affinity Value"
 	 * field into a linear index.
 	 */
 	do {
 		typer_val = gicr_read_typer(rdistif_base);
 		if (mpidr_to_core_pos) {
 			mpidr = mpidr_from_gicr_typer(typer_val);
 			proc_num = mpidr_to_core_pos(mpidr);
 		} else {
 			proc_num = (typer_val >> TYPER_PROC_NUM_SHIFT) &
 				TYPER_PROC_NUM_MASK;
 		}
 		assert(proc_num < rdistif_num);
 		rdistif_base_addrs[proc_num] = rdistif_base;
 		rdistif_base += (1 << GICR_PCPUBASE_SHIFT);
 	} while (!(typer_val & TYPER_LAST_BIT));
 }

 /*******************************************************************************
  * Helper function to configure the default attributes of SPIs.
  ******************************************************************************/
 void gicv3_spis_configure_defaults(uintptr_t gicd_base)
 {
 	unsigned int index, num_ints;

 	num_ints = gicd_read_typer(gicd_base);
 	num_ints &= TYPER_IT_LINES_NO_MASK;
 	num_ints = (num_ints + 1) << 5;

 	/*
 	 * Treat all SPIs as G1NS by default. The number of interrupts is
 	 * calculated as 32 * (IT_LINES + 1). We do 32 at a time.
 	 */
 	for (index = MIN_SPI_ID; index < num_ints; index += 32)
 		gicd_write_igroupr(gicd_base, index, ~0U);

 	/* Setup the default SPI priorities doing four at a time */
 	for (index = MIN_SPI_ID; index < num_ints; index += 4)
 		gicd_write_ipriorityr(gicd_base,
 				      index,
 				      GICD_IPRIORITYR_DEF_VAL);

 	/*
 	 * Treat all SPIs as level triggered by default, write 16 at
 	 * a time
 	 */
 	for (index = MIN_SPI_ID; index < num_ints; index += 16)
 		gicd_write_icfgr(gicd_base, index, 0);
 }

 /*******************************************************************************
  * Helper function to configure secure G0 and G1S SPIs.
  ******************************************************************************/
 void gicv3_secure_spis_configure(uintptr_t gicd_base,
 				     unsigned int num_ints,
 				     const unsigned int *sec_intr_list,
 				     unsigned int int_grp)
 {
 	unsigned int index, irq_num;
 	unsigned long long gic_affinity_val;

 	assert((int_grp == INTR_GROUP1S) || (int_grp == INTR_GROUP0));
 	/* If `num_ints` is not 0, ensure that `sec_intr_list` is not NULL */
 	assert(num_ints ? (uintptr_t)sec_intr_list : 1);

 	for (index = 0; index < num_ints; index++) {
 		irq_num = sec_intr_list[index];
 		if (irq_num >= MIN_SPI_ID) {

 			/* Configure this interrupt as a secure interrupt */
 			gicd_clr_igroupr(gicd_base, irq_num);

 			/* Configure this interrupt as G0 or a G1S interrupt */
 			if (int_grp == INTR_GROUP1S)
 				gicd_set_igrpmodr(gicd_base, irq_num);
 			else
 				gicd_clr_igrpmodr(gicd_base, irq_num);

 			/* Set the priority of this interrupt */
 			gicd_set_ipriorityr(gicd_base,
 					      irq_num,
 					      GIC_HIGHEST_SEC_PRIORITY);

 			/* Target SPIs to the primary CPU */
 			gic_affinity_val =
 				gicd_irouter_val_from_mpidr(read_mpidr(), 0);
 			gicd_write_irouter(gicd_base,
 					   irq_num,
 					   gic_affinity_val);

 			/* Enable this interrupt */
 			gicd_set_isenabler(gicd_base, irq_num);
 		}
 	}

 }

 /*******************************************************************************
  * Helper function to configure the default attributes of SPIs.
  ******************************************************************************/
 void gicv3_ppi_sgi_configure_defaults(uintptr_t gicr_base)
 {
 	unsigned int index;

 	/*
 	 * Disable all SGIs (imp. def.)/PPIs before configuring them. This is a
 	 * more scalable approach as it avoids clearing the enable bits in the
 	 * GICD_CTLR
 	 */
 	gicr_write_icenabler0(gicr_base, ~0);
 	gicr_wait_for_pending_write(gicr_base);

 	/* Treat all SGIs/PPIs as G1NS by default. */
 	gicr_write_igroupr0(gicr_base, ~0U);

 	/* Setup the default PPI/SGI priorities doing four at a time */
 	for (index = 0; index < MIN_SPI_ID; index += 4)
 		gicr_write_ipriorityr(gicr_base,
 				      index,
 				      GICD_IPRIORITYR_DEF_VAL);

 	/* Configure all PPIs as level triggered by default */
 	gicr_write_icfgr1(gicr_base, 0);
 }

 /*******************************************************************************
  * Helper function to configure secure G0 and G1S SPIs.
  ******************************************************************************/
 void gicv3_secure_ppi_sgi_configure(uintptr_t gicr_base,
 					unsigned int num_ints,
 					const unsigned int *sec_intr_list,
 					unsigned int int_grp)
 {
 	unsigned int index, irq_num;

 	assert((int_grp == INTR_GROUP1S) || (int_grp == INTR_GROUP0));
 	/* If `num_ints` is not 0, ensure that `sec_intr_list` is not NULL */
 	assert(num_ints ? (uintptr_t)sec_intr_list : 1);

 	for (index = 0; index < num_ints; index++) {
 		irq_num = sec_intr_list[index];
 		if (irq_num < MIN_SPI_ID) {

 			/* Configure this interrupt as a secure interrupt */
 			gicr_clr_igroupr0(gicr_base, irq_num);

 			/* Configure this interrupt as G0 or a G1S interrupt */
 			if (int_grp == INTR_GROUP1S)
 				gicr_set_igrpmodr0(gicr_base, irq_num);
 			else
 				gicr_clr_igrpmodr0(gicr_base, irq_num);

 			/* Set the priority of this interrupt */
 			gicr_set_ipriorityr(gicr_base,
 					    irq_num,
 					    GIC_HIGHEST_SEC_PRIORITY);

 			/* Enable this interrupt */
 			gicr_set_isenabler0(gicr_base, irq_num);
 		}
 	}
 }
	/*
	* Copyright (c) 2015-2016, ARM Limited and Contributors. All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are met:
	*
	* Redistributions of source code must retain the above copyright notice, this
	* list of conditions and the following disclaimer.
	*
	* Redistributions in binary form must reproduce the above copyright notice,
	* this list of conditions and the following disclaimer in the documentation
	* and/or other materials provided with the distribution.
	*
	* Neither the name of ARM nor the names of its contributors may be used
	* to endorse or promote products derived from this software without specific
	* prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
	* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
	* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
	* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
	* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
	* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
	* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
	* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
	* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
	* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
	* POSSIBILITY OF SUCH DAMAGE.
	*/

	#include <arch.h>
	#include <arch_helpers.h>
	#include <assert.h>
	#include <debug.h>
	#include <gic_common.h>
	#include "../common/gic_common_private.h"
	#include "gicv3_private.h"

	/*
	* Accessor to read the GIC Distributor IGRPMODR corresponding to the
	* interrupt `id`, 32 interrupt IDs at a time.
	*/
	unsigned int gicd_read_igrpmodr(uintptr_t base, unsigned int id)
	{
	unsigned n = id >> IGRPMODR_SHIFT;
	return mmio_read_32(base + GICD_IGRPMODR + (n << 2));
	}

	/*
	* Accessor to write the GIC Distributor IGRPMODR corresponding to the
	* interrupt `id`, 32 interrupt IDs at a time.
	*/
	void gicd_write_igrpmodr(uintptr_t base, unsigned int id, unsigned int val)
	{
	unsigned n = id >> IGRPMODR_SHIFT;
	mmio_write_32(base + GICD_IGRPMODR + (n << 2), val);
	}

	/*
	* Accessor to get the bit corresponding to interrupt ID
	* in GIC Distributor IGRPMODR.
	*/
	unsigned int gicd_get_igrpmodr(uintptr_t base, unsigned int id)
	{
	unsigned bit_num = id & ((1 << IGRPMODR_SHIFT) - 1);
	unsigned int reg_val = gicd_read_igrpmodr(base, id);

	return (reg_val >> bit_num) & 0x1;
	}

	/*
	* Accessor to set the bit corresponding to interrupt ID
	* in GIC Distributor IGRPMODR.
	*/
	void gicd_set_igrpmodr(uintptr_t base, unsigned int id)
	{
	unsigned bit_num = id & ((1 << IGRPMODR_SHIFT) - 1);
	unsigned int reg_val = gicd_read_igrpmodr(base, id);

	gicd_write_igrpmodr(base, id, reg_val \| (1 << bit_num));
	}

	/*
	* Accessor to clear the bit corresponding to interrupt ID
	* in GIC Distributor IGRPMODR.
	*/
	void gicd_clr_igrpmodr(uintptr_t base, unsigned int id)
	{
	unsigned bit_num = id & ((1 << IGRPMODR_SHIFT) - 1);
	unsigned int reg_val = gicd_read_igrpmodr(base, id);

	gicd_write_igrpmodr(base, id, reg_val & ~(1 << bit_num));
	}

	/*
	* Accessor to read the GIC Re-distributor IPRIORITYR corresponding to the
	* interrupt `id`, 4 interrupts IDs at a time.
	*/
	unsigned int gicr_read_ipriorityr(uintptr_t base, unsigned int id)
	{
	unsigned n = id >> IPRIORITYR_SHIFT;
	return mmio_read_32(base + GICR_IPRIORITYR + (n << 2));
	}

	/*
	* Accessor to write the GIC Re-distributor IPRIORITYR corresponding to the
	* interrupt `id`, 4 interrupts IDs at a time.
	*/
	void gicr_write_ipriorityr(uintptr_t base, unsigned int id, unsigned int val)
	{
	unsigned n = id >> IPRIORITYR_SHIFT;
	mmio_write_32(base + GICR_IPRIORITYR + (n << 2), val);
	}

	/*
	* Accessor to get the bit corresponding to interrupt ID
	* from GIC Re-distributor IGROUPR0.
	*/
	unsigned int gicr_get_igroupr0(uintptr_t base, unsigned int id)
	{
	unsigned bit_num = id & ((1 << IGROUPR_SHIFT) - 1);
	unsigned int reg_val = gicr_read_igroupr0(base);

	return (reg_val >> bit_num) & 0x1;
	}

	/*
	* Accessor to set the bit corresponding to interrupt ID
	* in GIC Re-distributor IGROUPR0.
	*/
	void gicr_set_igroupr0(uintptr_t base, unsigned int id)
	{
	unsigned bit_num = id & ((1 << IGROUPR_SHIFT) - 1);
	unsigned int reg_val = gicr_read_igroupr0(base);

	gicr_write_igroupr0(base, reg_val \| (1 << bit_num));
	}

	/*
	* Accessor to clear the bit corresponding to interrupt ID
	* in GIC Re-distributor IGROUPR0.
	*/
	void gicr_clr_igroupr0(uintptr_t base, unsigned int id)
	{
	unsigned bit_num = id & ((1 << IGROUPR_SHIFT) - 1);
	unsigned int reg_val = gicr_read_igroupr0(base);

	gicr_write_igroupr0(base, reg_val & ~(1 << bit_num));
	}

	/*
	* Accessor to get the bit corresponding to interrupt ID
	* from GIC Re-distributor IGRPMODR0.
	*/
	unsigned int gicr_get_igrpmodr0(uintptr_t base, unsigned int id)
	{
	unsigned bit_num = id & ((1 << IGRPMODR_SHIFT) - 1);
	unsigned int reg_val = gicr_read_igrpmodr0(base);

	return (reg_val >> bit_num) & 0x1;
	}

	/*
	* Accessor to set the bit corresponding to interrupt ID
	* in GIC Re-distributor IGRPMODR0.
	*/
	void gicr_set_igrpmodr0(uintptr_t base, unsigned int id)
	{
	unsigned bit_num = id & ((1 << IGRPMODR_SHIFT) - 1);
	unsigned int reg_val = gicr_read_igrpmodr0(base);

	gicr_write_igrpmodr0(base, reg_val \| (1 << bit_num));
	}

	/*
	* Accessor to clear the bit corresponding to interrupt ID
	* in GIC Re-distributor IGRPMODR0.
	*/
	void gicr_clr_igrpmodr0(uintptr_t base, unsigned int id)
	{
	unsigned bit_num = id & ((1 << IGRPMODR_SHIFT) - 1);
	unsigned int reg_val = gicr_read_igrpmodr0(base);

	gicr_write_igrpmodr0(base, reg_val & ~(1 << bit_num));
	}

	/*
	* Accessor to set the bit corresponding to interrupt ID
	* in GIC Re-distributor ISENABLER0.
	*/
	void gicr_set_isenabler0(uintptr_t base, unsigned int id)
	{
	unsigned bit_num = id & ((1 << ISENABLER_SHIFT) - 1);

	gicr_write_isenabler0(base, (1 << bit_num));
	}

	/*
	* Accessor to set the byte corresponding to interrupt ID
	* in GIC Re-distributor IPRIORITYR.
	*/
	void gicr_set_ipriorityr(uintptr_t base, unsigned int id, unsigned int pri)
	{
	mmio_write_8(base + GICR_IPRIORITYR + id, pri & GIC_PRI_MASK);
	}

	/******************************************************************************
	* This function marks the core as awake in the re-distributor and
	* ensures that the interface is active.
	*****************************************************************************/
	void gicv3_rdistif_mark_core_awake(uintptr_t gicr_base)
	{
	/*
	* The WAKER_PS_BIT should be changed to 0
	* only when WAKER_CA_BIT is 1.
	*/
	assert(gicr_read_waker(gicr_base) & WAKER_CA_BIT);

	/* Mark the connected core as awake */
	gicr_write_waker(gicr_base, gicr_read_waker(gicr_base) & ~WAKER_PS_BIT);

	/* Wait till the WAKER_CA_BIT changes to 0 */
	while (gicr_read_waker(gicr_base) & WAKER_CA_BIT)
	;
	}


	/******************************************************************************
	* This function marks the core as asleep in the re-distributor and ensures
	* that the interface is quiescent.
	*****************************************************************************/
	void gicv3_rdistif_mark_core_asleep(uintptr_t gicr_base)
	{
	/* Mark the connected core as asleep */
	gicr_write_waker(gicr_base, gicr_read_waker(gicr_base) \| WAKER_PS_BIT);

	/* Wait till the WAKER_CA_BIT changes to 1 */
	while (!(gicr_read_waker(gicr_base) & WAKER_CA_BIT))
	;
	}


	/*******************************************************************************
	* This function probes the Redistributor frames when the driver is initialised
	* and saves their base addresses. These base addresses are used later to
	* initialise each Redistributor interface.
	******************************************************************************/
	void gicv3_rdistif_base_addrs_probe(uintptr_t *rdistif_base_addrs,
	unsigned int rdistif_num,
	uintptr_t gicr_base,
	mpidr_hash_fn mpidr_to_core_pos)
	{
	u_register_t mpidr;
	unsigned int proc_num;
	unsigned long long typer_val;
	uintptr_t rdistif_base = gicr_base;

	assert(rdistif_base_addrs);

	/*
	* Iterate over the Redistributor frames. Store the base address of each
	* frame in the platform provided array. Use the "Processor Number"
	* field to index into the array if the platform has not provided a hash
	* function to convert an MPIDR (obtained from the "Affinity Value"
	* field into a linear index.
	*/
	do {
	typer_val = gicr_read_typer(rdistif_base);
	if (mpidr_to_core_pos) {
	mpidr = mpidr_from_gicr_typer(typer_val);
	proc_num = mpidr_to_core_pos(mpidr);
	} else {
	proc_num = (typer_val >> TYPER_PROC_NUM_SHIFT) &
	TYPER_PROC_NUM_MASK;
	}
	assert(proc_num < rdistif_num);
	rdistif_base_addrs[proc_num] = rdistif_base;
	rdistif_base += (1 << GICR_PCPUBASE_SHIFT);
	} while (!(typer_val & TYPER_LAST_BIT));
	}

	/*******************************************************************************
	* Helper function to configure the default attributes of SPIs.
	******************************************************************************/
	void gicv3_spis_configure_defaults(uintptr_t gicd_base)
	{
	unsigned int index, num_ints;

	num_ints = gicd_read_typer(gicd_base);
	num_ints &= TYPER_IT_LINES_NO_MASK;
	num_ints = (num_ints + 1) << 5;

	/*
	* Treat all SPIs as G1NS by default. The number of interrupts is
	* calculated as 32 * (IT_LINES + 1). We do 32 at a time.
	*/
	for (index = MIN_SPI_ID; index < num_ints; index += 32)
	gicd_write_igroupr(gicd_base, index, ~0U);

	/* Setup the default SPI priorities doing four at a time */
	for (index = MIN_SPI_ID; index < num_ints; index += 4)
	gicd_write_ipriorityr(gicd_base,
	index,
	GICD_IPRIORITYR_DEF_VAL);

	/*
	* Treat all SPIs as level triggered by default, write 16 at
	* a time
	*/
	for (index = MIN_SPI_ID; index < num_ints; index += 16)
	gicd_write_icfgr(gicd_base, index, 0);
	}

	/*******************************************************************************
	* Helper function to configure secure G0 and G1S SPIs.
	******************************************************************************/
	void gicv3_secure_spis_configure(uintptr_t gicd_base,
	unsigned int num_ints,
	const unsigned int *sec_intr_list,
	unsigned int int_grp)
	{
	unsigned int index, irq_num;
	unsigned long long gic_affinity_val;

	assert((int_grp == INTR_GROUP1S) \|\| (int_grp == INTR_GROUP0));
	/* If `num_ints` is not 0, ensure that `sec_intr_list` is not NULL */
	assert(num_ints ? (uintptr_t)sec_intr_list : 1);

	for (index = 0; index < num_ints; index++) {
	irq_num = sec_intr_list[index];
	if (irq_num >= MIN_SPI_ID) {

	/* Configure this interrupt as a secure interrupt */
	gicd_clr_igroupr(gicd_base, irq_num);

	/* Configure this interrupt as G0 or a G1S interrupt */
	if (int_grp == INTR_GROUP1S)
	gicd_set_igrpmodr(gicd_base, irq_num);
	else
	gicd_clr_igrpmodr(gicd_base, irq_num);

	/* Set the priority of this interrupt */
	gicd_set_ipriorityr(gicd_base,
	irq_num,
	GIC_HIGHEST_SEC_PRIORITY);

	/* Target SPIs to the primary CPU */
	gic_affinity_val =
	gicd_irouter_val_from_mpidr(read_mpidr(), 0);
	gicd_write_irouter(gicd_base,
	irq_num,
	gic_affinity_val);

	/* Enable this interrupt */
	gicd_set_isenabler(gicd_base, irq_num);
	}
	}

	}

	/*******************************************************************************
	* Helper function to configure the default attributes of SPIs.
	******************************************************************************/
	void gicv3_ppi_sgi_configure_defaults(uintptr_t gicr_base)
	{
	unsigned int index;

	/*
	* Disable all SGIs (imp. def.)/PPIs before configuring them. This is a
	* more scalable approach as it avoids clearing the enable bits in the
	* GICD_CTLR
	*/
	gicr_write_icenabler0(gicr_base, ~0);
	gicr_wait_for_pending_write(gicr_base);

	/* Treat all SGIs/PPIs as G1NS by default. */
	gicr_write_igroupr0(gicr_base, ~0U);

	/* Setup the default PPI/SGI priorities doing four at a time */
	for (index = 0; index < MIN_SPI_ID; index += 4)
	gicr_write_ipriorityr(gicr_base,
	index,
	GICD_IPRIORITYR_DEF_VAL);

	/* Configure all PPIs as level triggered by default */
	gicr_write_icfgr1(gicr_base, 0);
	}

	/*******************************************************************************
	* Helper function to configure secure G0 and G1S SPIs.
	******************************************************************************/
	void gicv3_secure_ppi_sgi_configure(uintptr_t gicr_base,
	unsigned int num_ints,
	const unsigned int *sec_intr_list,
	unsigned int int_grp)
	{
	unsigned int index, irq_num;

	assert((int_grp == INTR_GROUP1S) \|\| (int_grp == INTR_GROUP0));
	/* If `num_ints` is not 0, ensure that `sec_intr_list` is not NULL */
	assert(num_ints ? (uintptr_t)sec_intr_list : 1);

	for (index = 0; index < num_ints; index++) {
	irq_num = sec_intr_list[index];
	if (irq_num < MIN_SPI_ID) {

	/* Configure this interrupt as a secure interrupt */
	gicr_clr_igroupr0(gicr_base, irq_num);

	/* Configure this interrupt as G0 or a G1S interrupt */
	if (int_grp == INTR_GROUP1S)
	gicr_set_igrpmodr0(gicr_base, irq_num);
	else
	gicr_clr_igrpmodr0(gicr_base, irq_num);

	/* Set the priority of this interrupt */
	gicr_set_ipriorityr(gicr_base,
	irq_num,
	GIC_HIGHEST_SEC_PRIORITY);

	/* Enable this interrupt */
	gicr_set_isenabler0(gicr_base, irq_num);
	}
	}
	}