| /* |
| * Copyright (c) 2013-2022, ARM Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| /* ZynqMP power management enums and defines */ |
| |
| #ifndef PM_DEFS_H |
| #define PM_DEFS_H |
| |
| /********************************************************************* |
| * Macro definitions |
| ********************************************************************/ |
| |
| /* |
| * Version number is a 32bit value, like: |
| * (PM_VERSION_MAJOR << 16) | PM_VERSION_MINOR |
| */ |
| #define PM_VERSION_MAJOR 1 |
| #define PM_VERSION_MINOR 1 |
| |
| #define PM_VERSION ((PM_VERSION_MAJOR << 16) | PM_VERSION_MINOR) |
| |
| /** |
| * PM API versions |
| */ |
| /* Expected version of firmware APIs */ |
| #define FW_API_BASE_VERSION (1U) |
| /* Expected version of firmware API for feature check */ |
| #define FW_API_VERSION_2 (2U) |
| /* Version of APIs implemented in ATF */ |
| #define ATF_API_BASE_VERSION (1U) |
| |
| /* Capabilities for RAM */ |
| #define PM_CAP_ACCESS 0x1U |
| #define PM_CAP_CONTEXT 0x2U |
| |
| #define MAX_LATENCY (~0U) |
| #define MAX_QOS 100U |
| |
| /* State arguments of the self suspend */ |
| #define PM_STATE_CPU_IDLE 0x0U |
| #define PM_STATE_SUSPEND_TO_RAM 0xFU |
| |
| /* APU processor states */ |
| #define PM_PROC_STATE_FORCEDOFF 0U |
| #define PM_PROC_STATE_ACTIVE 1U |
| #define PM_PROC_STATE_SLEEP 2U |
| #define PM_PROC_STATE_SUSPENDING 3U |
| |
| #define EM_FUNID_NUM_MASK 0xF0000U |
| |
| #define PM_GET_CALLBACK_DATA 0xa01 |
| #define PM_SET_SUSPEND_MODE 0xa02 |
| #define PM_GET_TRUSTZONE_VERSION 0xa03 |
| |
| /********************************************************************* |
| * Enum definitions |
| ********************************************************************/ |
| |
| enum pm_api_id { |
| /* Miscellaneous API functions: */ |
| PM_GET_API_VERSION = 1, /* Do not change or move */ |
| PM_SET_CONFIGURATION, |
| PM_GET_NODE_STATUS, |
| PM_GET_OP_CHARACTERISTIC, |
| PM_REGISTER_NOTIFIER, |
| /* API for suspending of PUs: */ |
| PM_REQ_SUSPEND, |
| PM_SELF_SUSPEND, |
| PM_FORCE_POWERDOWN, |
| PM_ABORT_SUSPEND, |
| PM_REQ_WAKEUP, |
| PM_SET_WAKEUP_SOURCE, |
| PM_SYSTEM_SHUTDOWN, |
| /* API for managing PM slaves: */ |
| PM_REQ_NODE, |
| PM_RELEASE_NODE, |
| PM_SET_REQUIREMENT, |
| PM_SET_MAX_LATENCY, |
| /* Direct control API functions: */ |
| PM_RESET_ASSERT, |
| PM_RESET_GET_STATUS, |
| PM_MMIO_WRITE, |
| PM_MMIO_READ, |
| PM_INIT_FINALIZE, |
| PM_FPGA_LOAD, |
| PM_FPGA_GET_STATUS, |
| PM_GET_CHIPID, |
| PM_SECURE_RSA_AES, |
| PM_SECURE_SHA, |
| PM_SECURE_RSA, |
| PM_PINCTRL_REQUEST, |
| PM_PINCTRL_RELEASE, |
| PM_PINCTRL_GET_FUNCTION, |
| PM_PINCTRL_SET_FUNCTION, |
| PM_PINCTRL_CONFIG_PARAM_GET, |
| PM_PINCTRL_CONFIG_PARAM_SET, |
| PM_IOCTL, |
| /* API to query information from firmware */ |
| PM_QUERY_DATA, |
| /* Clock control API functions */ |
| PM_CLOCK_ENABLE, |
| PM_CLOCK_DISABLE, |
| PM_CLOCK_GETSTATE, |
| PM_CLOCK_SETDIVIDER, |
| PM_CLOCK_GETDIVIDER, |
| PM_CLOCK_SETRATE, |
| PM_CLOCK_GETRATE, |
| PM_CLOCK_SETPARENT, |
| PM_CLOCK_GETPARENT, |
| PM_SECURE_IMAGE, |
| /* FPGA PL Readback */ |
| PM_FPGA_READ, |
| PM_SECURE_AES, |
| /* PLL control API functions */ |
| PM_PLL_SET_PARAMETER, |
| PM_PLL_GET_PARAMETER, |
| PM_PLL_SET_MODE, |
| PM_PLL_GET_MODE, |
| /* PM Register Access API */ |
| PM_REGISTER_ACCESS, |
| PM_EFUSE_ACCESS, |
| PM_FPGA_GET_VERSION, |
| PM_FPGA_GET_FEATURE_LIST, |
| PM_FEATURE_CHECK = 63, |
| PM_API_MAX |
| }; |
| |
| enum pm_node_id { |
| NODE_UNKNOWN = 0, |
| NODE_APU, |
| NODE_APU_0, |
| NODE_APU_1, |
| NODE_APU_2, |
| NODE_APU_3, |
| NODE_RPU, |
| NODE_RPU_0, |
| NODE_RPU_1, |
| NODE_PLD, |
| NODE_FPD, |
| NODE_OCM_BANK_0, |
| NODE_OCM_BANK_1, |
| NODE_OCM_BANK_2, |
| NODE_OCM_BANK_3, |
| NODE_TCM_0_A, |
| NODE_TCM_0_B, |
| NODE_TCM_1_A, |
| NODE_TCM_1_B, |
| NODE_L2, |
| NODE_GPU_PP_0, |
| NODE_GPU_PP_1, |
| NODE_USB_0, |
| NODE_USB_1, |
| NODE_TTC_0, |
| NODE_TTC_1, |
| NODE_TTC_2, |
| NODE_TTC_3, |
| NODE_SATA, |
| NODE_ETH_0, |
| NODE_ETH_1, |
| NODE_ETH_2, |
| NODE_ETH_3, |
| NODE_UART_0, |
| NODE_UART_1, |
| NODE_SPI_0, |
| NODE_SPI_1, |
| NODE_I2C_0, |
| NODE_I2C_1, |
| NODE_SD_0, |
| NODE_SD_1, |
| NODE_DP, |
| NODE_GDMA, |
| NODE_ADMA, |
| NODE_NAND, |
| NODE_QSPI, |
| NODE_GPIO, |
| NODE_CAN_0, |
| NODE_CAN_1, |
| NODE_EXTERN, |
| NODE_APLL, |
| NODE_VPLL, |
| NODE_DPLL, |
| NODE_RPLL, |
| NODE_IOPLL, |
| NODE_DDR, |
| NODE_IPI_APU, |
| NODE_IPI_RPU_0, |
| NODE_GPU, |
| NODE_PCIE, |
| NODE_PCAP, |
| NODE_RTC, |
| NODE_LPD, |
| NODE_VCU, |
| NODE_IPI_RPU_1, |
| NODE_IPI_PL_0, |
| NODE_IPI_PL_1, |
| NODE_IPI_PL_2, |
| NODE_IPI_PL_3, |
| NODE_PL, |
| NODE_GEM_TSU, |
| NODE_SWDT_0, |
| NODE_SWDT_1, |
| NODE_CSU, |
| NODE_PJTAG, |
| NODE_TRACE, |
| NODE_TESTSCAN, |
| NODE_PMU, |
| NODE_MAX, |
| }; |
| |
| enum pm_request_ack { |
| REQ_ACK_NO = 1, |
| REQ_ACK_BLOCKING, |
| REQ_ACK_NON_BLOCKING, |
| }; |
| |
| enum pm_abort_reason { |
| ABORT_REASON_WKUP_EVENT = 100, |
| ABORT_REASON_PU_BUSY, |
| ABORT_REASON_NO_PWRDN, |
| ABORT_REASON_UNKNOWN, |
| }; |
| |
| enum pm_suspend_reason { |
| SUSPEND_REASON_PU_REQ = 201, |
| SUSPEND_REASON_ALERT, |
| SUSPEND_REASON_SYS_SHUTDOWN, |
| }; |
| |
| enum pm_ram_state { |
| PM_RAM_STATE_OFF = 1, |
| PM_RAM_STATE_RETENTION, |
| PM_RAM_STATE_ON, |
| }; |
| |
| enum pm_opchar_type { |
| PM_OPCHAR_TYPE_POWER = 1, |
| PM_OPCHAR_TYPE_TEMP, |
| PM_OPCHAR_TYPE_LATENCY, |
| }; |
| |
| /** |
| * @PM_RET_SUCCESS: success |
| * @PM_RET_ERROR_ARGS: illegal arguments provided (deprecated) |
| * @PM_RET_ERROR_NOTSUPPORTED: feature not supported (deprecated) |
| * @PM_RET_ERROR_INTERNAL: internal error |
| * @PM_RET_ERROR_CONFLICT: conflict |
| * @PM_RET_ERROR_ACCESS: access rights violation |
| * @PM_RET_ERROR_INVALID_NODE: invalid node |
| * @PM_RET_ERROR_DOUBLE_REQ: duplicate request for same node |
| * @PM_RET_ERROR_ABORT_SUSPEND: suspend procedure has been aborted |
| * @PM_RET_ERROR_TIMEOUT: timeout in communication with PMU |
| * @PM_RET_ERROR_NODE_USED: node is already in use |
| */ |
| enum pm_ret_status { |
| PM_RET_SUCCESS, |
| PM_RET_ERROR_ARGS = 1, |
| PM_RET_ERROR_NOTSUPPORTED = 4, |
| PM_RET_ERROR_INTERNAL = 2000, |
| PM_RET_ERROR_CONFLICT = 2001, |
| PM_RET_ERROR_ACCESS = 2002, |
| PM_RET_ERROR_INVALID_NODE = 2003, |
| PM_RET_ERROR_DOUBLE_REQ = 2004, |
| PM_RET_ERROR_ABORT_SUSPEND = 2005, |
| PM_RET_ERROR_TIMEOUT = 2006, |
| PM_RET_ERROR_NODE_USED = 2007, |
| PM_RET_ERROR_NO_FEATURE = 2008 |
| }; |
| |
| /** |
| * @PM_INITIAL_BOOT: boot is a fresh system startup |
| * @PM_RESUME: boot is a resume |
| * @PM_BOOT_ERROR: error, boot cause cannot be identified |
| */ |
| enum pm_boot_status { |
| PM_INITIAL_BOOT, |
| PM_RESUME, |
| PM_BOOT_ERROR, |
| }; |
| |
| /** |
| * @PMF_SHUTDOWN_TYPE_SHUTDOWN: shutdown |
| * @PMF_SHUTDOWN_TYPE_RESET: reset/reboot |
| * @PMF_SHUTDOWN_TYPE_SETSCOPE_ONLY: set the shutdown/reboot scope |
| */ |
| enum pm_shutdown_type { |
| PMF_SHUTDOWN_TYPE_SHUTDOWN, |
| PMF_SHUTDOWN_TYPE_RESET, |
| PMF_SHUTDOWN_TYPE_SETSCOPE_ONLY, |
| }; |
| |
| /** |
| * @PMF_SHUTDOWN_SUBTYPE_SUBSYSTEM: shutdown/reboot APU subsystem only |
| * @PMF_SHUTDOWN_SUBTYPE_PS_ONLY: shutdown/reboot entire PS (but not PL) |
| * @PMF_SHUTDOWN_SUBTYPE_SYSTEM: shutdown/reboot entire system |
| */ |
| enum pm_shutdown_subtype { |
| PMF_SHUTDOWN_SUBTYPE_SUBSYSTEM, |
| PMF_SHUTDOWN_SUBTYPE_PS_ONLY, |
| PMF_SHUTDOWN_SUBTYPE_SYSTEM, |
| }; |
| |
| /** |
| * @PM_PLL_PARAM_DIV2: Enable for divide by 2 function inside the PLL |
| * @PM_PLL_PARAM_FBDIV: Feedback divisor integer portion for the PLL |
| * @PM_PLL_PARAM_DATA: Feedback divisor fractional portion for the PLL |
| * @PM_PLL_PARAM_PRE_SRC: Clock source for PLL input |
| * @PM_PLL_PARAM_POST_SRC: Clock source for PLL Bypass mode |
| * @PM_PLL_PARAM_LOCK_DLY: Lock circuit config settings for lock windowsize |
| * @PM_PLL_PARAM_LOCK_CNT: Lock circuit counter setting |
| * @PM_PLL_PARAM_LFHF: PLL loop filter high frequency capacitor control |
| * @PM_PLL_PARAM_CP: PLL charge pump control |
| * @PM_PLL_PARAM_RES: PLL loop filter resistor control |
| */ |
| enum pm_pll_param { |
| PM_PLL_PARAM_DIV2, |
| PM_PLL_PARAM_FBDIV, |
| PM_PLL_PARAM_DATA, |
| PM_PLL_PARAM_PRE_SRC, |
| PM_PLL_PARAM_POST_SRC, |
| PM_PLL_PARAM_LOCK_DLY, |
| PM_PLL_PARAM_LOCK_CNT, |
| PM_PLL_PARAM_LFHF, |
| PM_PLL_PARAM_CP, |
| PM_PLL_PARAM_RES, |
| PM_PLL_PARAM_MAX, |
| }; |
| |
| /** |
| * @PM_PLL_MODE_RESET: PLL is in reset (not locked) |
| * @PM_PLL_MODE_INTEGER: PLL is locked in integer mode |
| * @PM_PLL_MODE_FRACTIONAL: PLL is locked in fractional mode |
| */ |
| enum pm_pll_mode { |
| PM_PLL_MODE_RESET, |
| PM_PLL_MODE_INTEGER, |
| PM_PLL_MODE_FRACTIONAL, |
| PM_PLL_MODE_MAX, |
| }; |
| |
| /** |
| * @PM_CLOCK_DIV0_ID: Clock divider 0 |
| * @PM_CLOCK_DIV1_ID: Clock divider 1 |
| */ |
| enum pm_clock_div_id { |
| PM_CLOCK_DIV0_ID, |
| PM_CLOCK_DIV1_ID, |
| }; |
| |
| /** |
| * EM API IDs |
| */ |
| enum em_api_id { |
| EM_SET_ACTION = 1, |
| EM_REMOVE_ACTION, |
| EM_SEND_ERRORS, |
| }; |
| |
| #endif /* PM_DEFS_H */ |