drivers/arm/gic/v3/gicv3_helpers.c - filogic/atf - Gitiles

 /*
  * Copyright (c) 2015-2020, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */

 #include <assert.h>

 #include <arch.h>
 #include <arch_helpers.h>
 #include <common/debug.h>
 #include <common/interrupt_props.h>
 #include <drivers/arm/gic_common.h>

 #include "../common/gic_common_private.h"
 #include "gicv3_private.h"

 /******************************************************************************
  * This function marks the core as awake in the re-distributor and
  * ensures that the interface is active.
  *****************************************************************************/
 void gicv3_rdistif_mark_core_awake(uintptr_t gicr_base)
 {
 	/*
 	 * The WAKER_PS_BIT should be changed to 0
 	 * only when WAKER_CA_BIT is 1.
 	 */
 	assert((gicr_read_waker(gicr_base) & WAKER_CA_BIT) != 0U);

 	/* Mark the connected core as awake */
 	gicr_write_waker(gicr_base, gicr_read_waker(gicr_base) & ~WAKER_PS_BIT);

 	/* Wait till the WAKER_CA_BIT changes to 0 */
 	while ((gicr_read_waker(gicr_base) & WAKER_CA_BIT) != 0U) {
 	}
 }

 /******************************************************************************
  * This function marks the core as asleep in the re-distributor and ensures
  * that the interface is quiescent.
  *****************************************************************************/
 void gicv3_rdistif_mark_core_asleep(uintptr_t gicr_base)
 {
 	/* Mark the connected core as asleep */
 	gicr_write_waker(gicr_base, gicr_read_waker(gicr_base) | WAKER_PS_BIT);

 	/* Wait till the WAKER_CA_BIT changes to 1 */
 	while ((gicr_read_waker(gicr_base) & WAKER_CA_BIT) == 0U) {
 	}
 }

 /*******************************************************************************
  * This function probes the Redistributor frames when the driver is initialised
  * and saves their base addresses. These base addresses are used later to
  * initialise each Redistributor interface.
  ******************************************************************************/
 void gicv3_rdistif_base_addrs_probe(uintptr_t *rdistif_base_addrs,
 					unsigned int rdistif_num,
 					uintptr_t gicr_base,
 					mpidr_hash_fn mpidr_to_core_pos)
 {
 	u_register_t mpidr;
 	unsigned int proc_num;
 	uint64_t typer_val;
 	uintptr_t rdistif_base = gicr_base;

 	assert(rdistif_base_addrs != NULL);

 	/*
 	 * Iterate over the Redistributor frames. Store the base address of each
 	 * frame in the platform provided array. Use the "Processor Number"
 	 * field to index into the array if the platform has not provided a hash
 	 * function to convert an MPIDR (obtained from the "Affinity Value"
 	 * field into a linear index.
 	 */
 	do {
 		typer_val = gicr_read_typer(rdistif_base);
 		if (mpidr_to_core_pos != NULL) {
 			mpidr = mpidr_from_gicr_typer(typer_val);
 			proc_num = mpidr_to_core_pos(mpidr);
 		} else {
 			proc_num = (typer_val >> TYPER_PROC_NUM_SHIFT) &
 				TYPER_PROC_NUM_MASK;
 		}

 		if (proc_num < rdistif_num) {
 			rdistif_base_addrs[proc_num] = rdistif_base;
 		}

 		rdistif_base += (1U << GICR_PCPUBASE_SHIFT);
 	} while ((typer_val & TYPER_LAST_BIT) == 0U);
 }

 /*******************************************************************************
  * Helper function to configure the default attributes of (E)SPIs.
  ******************************************************************************/
 void gicv3_spis_config_defaults(uintptr_t gicd_base)
 {
 	unsigned int i, num_ints;
 #if GIC_EXT_INTID
 	unsigned int num_eints;
 #endif
 	unsigned int typer_reg = gicd_read_typer(gicd_base);

 	/* Maximum SPI INTID is 32 * (GICD_TYPER.ITLinesNumber + 1) - 1 */
 	num_ints = ((typer_reg & TYPER_IT_LINES_NO_MASK) + 1U) << 5;

 	/* Treat all (E)SPIs as G1NS by default. We do 32 at a time. */
 	for (i = MIN_SPI_ID; i < num_ints; i += (1U << IGROUPR_SHIFT)) {
 		gicd_write_igroupr(gicd_base, i, ~0U);
 	}

 #if GIC_EXT_INTID
 	/* Check if extended SPI range is implemented */
 	if ((typer_reg & TYPER_ESPI) != 0U) {
 		/*
 		 * Maximum ESPI INTID is 32 * (GICD_TYPER.ESPI_range + 1) + 4095
 		 */
 		num_eints = ((((typer_reg >> TYPER_ESPI_RANGE_SHIFT) &
 			TYPER_ESPI_RANGE_MASK) + 1U) << 5) + MIN_ESPI_ID - 1;

 		for (i = MIN_ESPI_ID; i < num_eints;
 					i += (1U << IGROUPR_SHIFT)) {
 			gicd_write_igroupr(gicd_base, i, ~0U);
 		}
 	} else {
 		num_eints = 0U;
 	}
 #endif

 	/* Setup the default (E)SPI priorities doing four at a time */
 	for (i = MIN_SPI_ID; i < num_ints; i += (1U << IPRIORITYR_SHIFT)) {
 		gicd_write_ipriorityr(gicd_base, i, GICD_IPRIORITYR_DEF_VAL);
 	}

 #if GIC_EXT_INTID
 	for (i = MIN_ESPI_ID; i < num_eints;
 					i += (1U << IPRIORITYR_SHIFT)) {
 		gicd_write_ipriorityr(gicd_base, i, GICD_IPRIORITYR_DEF_VAL);
 	}
 #endif
 	/*
 	 * Treat all (E)SPIs as level triggered by default, write 16 at a time
 	 */
 	for (i = MIN_SPI_ID; i < num_ints; i += (1U << ICFGR_SHIFT)) {
 		gicd_write_icfgr(gicd_base, i, 0U);
 	}

 #if GIC_EXT_INTID
 	for (i = MIN_ESPI_ID; i < num_eints; i += (1U << ICFGR_SHIFT)) {
 		gicd_write_icfgr(gicd_base, i, 0U);
 	}
 #endif
 }

 /*******************************************************************************
  * Helper function to configure properties of secure (E)SPIs
  ******************************************************************************/
 unsigned int gicv3_secure_spis_config_props(uintptr_t gicd_base,
 		const interrupt_prop_t *interrupt_props,
 		unsigned int interrupt_props_num)
 {
 	unsigned int i;
 	const interrupt_prop_t *current_prop;
 	unsigned long long gic_affinity_val;
 	unsigned int ctlr_enable = 0U;

 	/* Make sure there's a valid property array */
 	if (interrupt_props_num > 0U) {
 		assert(interrupt_props != NULL);
 	}

 	for (i = 0U; i < interrupt_props_num; i++) {
 		current_prop = &interrupt_props[i];

 		unsigned int intr_num = current_prop->intr_num;

 		/* Skip SGI, (E)PPI and LPI interrupts */
 		if (!IS_SPI(intr_num)) {
 			continue;
 		}

 		/* Configure this interrupt as a secure interrupt */
 		gicd_clr_igroupr(gicd_base, intr_num);

 		/* Configure this interrupt as G0 or a G1S interrupt */
 		assert((current_prop->intr_grp == INTR_GROUP0) ||
 				(current_prop->intr_grp == INTR_GROUP1S));

 		if (current_prop->intr_grp == INTR_GROUP1S) {
 			gicd_set_igrpmodr(gicd_base, intr_num);
 			ctlr_enable |= CTLR_ENABLE_G1S_BIT;
 		} else {
 			gicd_clr_igrpmodr(gicd_base, intr_num);
 			ctlr_enable |= CTLR_ENABLE_G0_BIT;
 		}

 		/* Set interrupt configuration */
 		gicd_set_icfgr(gicd_base, intr_num, current_prop->intr_cfg);

 		/* Set the priority of this interrupt */
 		gicd_set_ipriorityr(gicd_base, intr_num,
 					current_prop->intr_pri);

 		/* Target (E)SPIs to the primary CPU */
 		gic_affinity_val =
 			gicd_irouter_val_from_mpidr(read_mpidr(), 0U);
 		gicd_write_irouter(gicd_base, intr_num,
 					gic_affinity_val);

 		/* Enable this interrupt */
 		gicd_set_isenabler(gicd_base, intr_num);
 	}

 	return ctlr_enable;
 }

 /*******************************************************************************
  * Helper function to configure the default attributes of (E)SPIs
  ******************************************************************************/
 void gicv3_ppi_sgi_config_defaults(uintptr_t gicr_base)
 {
 	unsigned int i, ppi_regs_num, regs_num;

 #if GIC_EXT_INTID
 	/* Calculate number of PPI registers */
 	ppi_regs_num = (unsigned int)((gicr_read_typer(gicr_base) >>
 			TYPER_PPI_NUM_SHIFT) & TYPER_PPI_NUM_MASK) + 1;
 	/* All other values except PPInum [0-2] are reserved */
 	if (ppi_regs_num > 3U) {
 		ppi_regs_num = 1U;
 	}
 #else
 	ppi_regs_num = 1U;
 #endif
 	/*
 	 * Disable all SGIs (imp. def.)/(E)PPIs before configuring them.
 	 * This is a more scalable approach as it avoids clearing
 	 * the enable bits in the GICD_CTLR.
 	 */
 	for (i = 0U; i < ppi_regs_num; ++i) {
 		gicr_write_icenabler(gicr_base, i, ~0U);
 	}

 	/* Wait for pending writes to GICR_ICENABLER */
 	gicr_wait_for_pending_write(gicr_base);

 	/* 32 interrupt IDs per GICR_IGROUPR register */
 	for (i = 0U; i < ppi_regs_num; ++i) {
 		/* Treat all SGIs/(E)PPIs as G1NS by default */
 		gicr_write_igroupr(gicr_base, i, ~0U);
 	}

 	/* 4 interrupt IDs per GICR_IPRIORITYR register */
 	regs_num = ppi_regs_num << 3;
 	for (i = 0U; i < regs_num; ++i) {
 		/* Setup the default (E)PPI/SGI priorities doing 4 at a time */
 		gicr_write_ipriorityr(gicr_base, i, GICD_IPRIORITYR_DEF_VAL);
 	}

 	/* 16 interrupt IDs per GICR_ICFGR register */
 	regs_num = ppi_regs_num << 1;
 	for (i = (MIN_PPI_ID >> ICFGR_SHIFT); i < regs_num; ++i) {
 		/* Configure all (E)PPIs as level triggered by default */
 		gicr_write_icfgr(gicr_base, i, 0U);
 	}
 }

 /*******************************************************************************
  * Helper function to configure properties of secure G0 and G1S (E)PPIs and SGIs
  ******************************************************************************/
 unsigned int gicv3_secure_ppi_sgi_config_props(uintptr_t gicr_base,
 		const interrupt_prop_t *interrupt_props,
 		unsigned int interrupt_props_num)
 {
 	unsigned int i;
 	const interrupt_prop_t *current_prop;
 	unsigned int ctlr_enable = 0U;

 	/* Make sure there's a valid property array */
 	if (interrupt_props_num > 0U) {
 		assert(interrupt_props != NULL);
 	}

 	for (i = 0U; i < interrupt_props_num; i++) {
 		current_prop = &interrupt_props[i];

 		unsigned int intr_num = current_prop->intr_num;

 		/* Skip (E)SPI interrupt */
 		if (!IS_SGI_PPI(intr_num)) {
 			continue;
 		}

 		/* Configure this interrupt as a secure interrupt */
 		gicr_clr_igroupr(gicr_base, intr_num);

 		/* Configure this interrupt as G0 or a G1S interrupt */
 		assert((current_prop->intr_grp == INTR_GROUP0) ||
 			(current_prop->intr_grp == INTR_GROUP1S));

 		if (current_prop->intr_grp == INTR_GROUP1S) {
 			gicr_set_igrpmodr(gicr_base, intr_num);
 			ctlr_enable |= CTLR_ENABLE_G1S_BIT;
 		} else {
 			gicr_clr_igrpmodr(gicr_base, intr_num);
 			ctlr_enable |= CTLR_ENABLE_G0_BIT;
 		}

 		/* Set the priority of this interrupt */
 		gicr_set_ipriorityr(gicr_base, intr_num,
 					current_prop->intr_pri);

 		/*
 		 * Set interrupt configuration for (E)PPIs.
 		 * Configurations for SGIs 0-15 are ignored.
 		 */
 		if (intr_num >= MIN_PPI_ID) {
 			gicr_set_icfgr(gicr_base, intr_num,
 					current_prop->intr_cfg);
 		}

 		/* Enable this interrupt */
 		gicr_set_isenabler(gicr_base, intr_num);
 	}

 	return ctlr_enable;
 }

 /**
  * gicv3_rdistif_get_number_frames() - determine size of GICv3 GICR region
  * @gicr_frame: base address of the GICR region to check
  *
  * This iterates over the GICR_TYPER registers of multiple GICR frames in
  * a GICR region, to find the instance which has the LAST bit set. For most
  * systems this corresponds to the number of cores handled by a redistributor,
  * but there could be disabled cores among them.
  * It assumes that each GICR region is fully accessible (till the LAST bit
  * marks the end of the region).
  * If a platform has multiple GICR regions, this function would need to be
  * called multiple times, providing the respective GICR base address each time.
  *
  * Return: number of valid GICR frames (at least 1, up to PLATFORM_CORE_COUNT)
  ******************************************************************************/
 unsigned int gicv3_rdistif_get_number_frames(const uintptr_t gicr_frame)
 {
 	uintptr_t rdistif_base = gicr_frame;
 	unsigned int count;

 	for (count = 1; count < PLATFORM_CORE_COUNT; count++) {
 		if ((gicr_read_typer(rdistif_base) & TYPER_LAST_BIT) != 0U) {
 			break;
 		}
 		rdistif_base += (1U << GICR_PCPUBASE_SHIFT);
 	}

 	return count;
 }
	/*
	* Copyright (c) 2015-2020, ARM Limited and Contributors. All rights reserved.
	*
	* SPDX-License-Identifier: BSD-3-Clause
	*/

	#include <assert.h>

	#include <arch.h>
	#include <arch_helpers.h>
	#include <common/debug.h>
	#include <common/interrupt_props.h>
	#include <drivers/arm/gic_common.h>

	#include "../common/gic_common_private.h"
	#include "gicv3_private.h"

	/******************************************************************************
	* This function marks the core as awake in the re-distributor and
	* ensures that the interface is active.
	*****************************************************************************/
	void gicv3_rdistif_mark_core_awake(uintptr_t gicr_base)
	{
	/*
	* The WAKER_PS_BIT should be changed to 0
	* only when WAKER_CA_BIT is 1.
	*/
	assert((gicr_read_waker(gicr_base) & WAKER_CA_BIT) != 0U);

	/* Mark the connected core as awake */
	gicr_write_waker(gicr_base, gicr_read_waker(gicr_base) & ~WAKER_PS_BIT);

	/* Wait till the WAKER_CA_BIT changes to 0 */
	while ((gicr_read_waker(gicr_base) & WAKER_CA_BIT) != 0U) {
	}
	}

	/******************************************************************************
	* This function marks the core as asleep in the re-distributor and ensures
	* that the interface is quiescent.
	*****************************************************************************/
	void gicv3_rdistif_mark_core_asleep(uintptr_t gicr_base)
	{
	/* Mark the connected core as asleep */
	gicr_write_waker(gicr_base, gicr_read_waker(gicr_base) \| WAKER_PS_BIT);

	/* Wait till the WAKER_CA_BIT changes to 1 */
	while ((gicr_read_waker(gicr_base) & WAKER_CA_BIT) == 0U) {
	}
	}

	/*******************************************************************************
	* This function probes the Redistributor frames when the driver is initialised
	* and saves their base addresses. These base addresses are used later to
	* initialise each Redistributor interface.
	******************************************************************************/
	void gicv3_rdistif_base_addrs_probe(uintptr_t *rdistif_base_addrs,
	unsigned int rdistif_num,
	uintptr_t gicr_base,
	mpidr_hash_fn mpidr_to_core_pos)
	{
	u_register_t mpidr;
	unsigned int proc_num;
	uint64_t typer_val;
	uintptr_t rdistif_base = gicr_base;

	assert(rdistif_base_addrs != NULL);

	/*
	* Iterate over the Redistributor frames. Store the base address of each
	* frame in the platform provided array. Use the "Processor Number"
	* field to index into the array if the platform has not provided a hash
	* function to convert an MPIDR (obtained from the "Affinity Value"
	* field into a linear index.
	*/
	do {
	typer_val = gicr_read_typer(rdistif_base);
	if (mpidr_to_core_pos != NULL) {
	mpidr = mpidr_from_gicr_typer(typer_val);
	proc_num = mpidr_to_core_pos(mpidr);
	} else {
	proc_num = (typer_val >> TYPER_PROC_NUM_SHIFT) &
	TYPER_PROC_NUM_MASK;
	}

	if (proc_num < rdistif_num) {
	rdistif_base_addrs[proc_num] = rdistif_base;
	}

	rdistif_base += (1U << GICR_PCPUBASE_SHIFT);
	} while ((typer_val & TYPER_LAST_BIT) == 0U);
	}

	/*******************************************************************************
	* Helper function to configure the default attributes of (E)SPIs.
	******************************************************************************/
	void gicv3_spis_config_defaults(uintptr_t gicd_base)
	{
	unsigned int i, num_ints;
	#if GIC_EXT_INTID
	unsigned int num_eints;
	#endif
	unsigned int typer_reg = gicd_read_typer(gicd_base);

	/* Maximum SPI INTID is 32 * (GICD_TYPER.ITLinesNumber + 1) - 1 */
	num_ints = ((typer_reg & TYPER_IT_LINES_NO_MASK) + 1U) << 5;

	/* Treat all (E)SPIs as G1NS by default. We do 32 at a time. */
	for (i = MIN_SPI_ID; i < num_ints; i += (1U << IGROUPR_SHIFT)) {
	gicd_write_igroupr(gicd_base, i, ~0U);
	}

	#if GIC_EXT_INTID
	/* Check if extended SPI range is implemented */
	if ((typer_reg & TYPER_ESPI) != 0U) {
	/*
	* Maximum ESPI INTID is 32 * (GICD_TYPER.ESPI_range + 1) + 4095
	*/
	num_eints = ((((typer_reg >> TYPER_ESPI_RANGE_SHIFT) &
	TYPER_ESPI_RANGE_MASK) + 1U) << 5) + MIN_ESPI_ID - 1;

	for (i = MIN_ESPI_ID; i < num_eints;
	i += (1U << IGROUPR_SHIFT)) {
	gicd_write_igroupr(gicd_base, i, ~0U);
	}
	} else {
	num_eints = 0U;
	}
	#endif

	/* Setup the default (E)SPI priorities doing four at a time */
	for (i = MIN_SPI_ID; i < num_ints; i += (1U << IPRIORITYR_SHIFT)) {
	gicd_write_ipriorityr(gicd_base, i, GICD_IPRIORITYR_DEF_VAL);
	}

	#if GIC_EXT_INTID
	for (i = MIN_ESPI_ID; i < num_eints;
	i += (1U << IPRIORITYR_SHIFT)) {
	gicd_write_ipriorityr(gicd_base, i, GICD_IPRIORITYR_DEF_VAL);
	}
	#endif
	/*
	* Treat all (E)SPIs as level triggered by default, write 16 at a time
	*/
	for (i = MIN_SPI_ID; i < num_ints; i += (1U << ICFGR_SHIFT)) {
	gicd_write_icfgr(gicd_base, i, 0U);
	}

	#if GIC_EXT_INTID
	for (i = MIN_ESPI_ID; i < num_eints; i += (1U << ICFGR_SHIFT)) {
	gicd_write_icfgr(gicd_base, i, 0U);
	}
	#endif
	}

	/*******************************************************************************
	* Helper function to configure properties of secure (E)SPIs
	******************************************************************************/
	unsigned int gicv3_secure_spis_config_props(uintptr_t gicd_base,
	const interrupt_prop_t *interrupt_props,
	unsigned int interrupt_props_num)
	{
	unsigned int i;
	const interrupt_prop_t *current_prop;
	unsigned long long gic_affinity_val;
	unsigned int ctlr_enable = 0U;

	/* Make sure there's a valid property array */
	if (interrupt_props_num > 0U) {
	assert(interrupt_props != NULL);
	}

	for (i = 0U; i < interrupt_props_num; i++) {
	current_prop = &interrupt_props[i];

	unsigned int intr_num = current_prop->intr_num;

	/* Skip SGI, (E)PPI and LPI interrupts */
	if (!IS_SPI(intr_num)) {
	continue;
	}

	/* Configure this interrupt as a secure interrupt */
	gicd_clr_igroupr(gicd_base, intr_num);

	/* Configure this interrupt as G0 or a G1S interrupt */
	assert((current_prop->intr_grp == INTR_GROUP0) \|\|
	(current_prop->intr_grp == INTR_GROUP1S));

	if (current_prop->intr_grp == INTR_GROUP1S) {
	gicd_set_igrpmodr(gicd_base, intr_num);
	ctlr_enable \|= CTLR_ENABLE_G1S_BIT;
	} else {
	gicd_clr_igrpmodr(gicd_base, intr_num);
	ctlr_enable \|= CTLR_ENABLE_G0_BIT;
	}

	/* Set interrupt configuration */
	gicd_set_icfgr(gicd_base, intr_num, current_prop->intr_cfg);

	/* Set the priority of this interrupt */
	gicd_set_ipriorityr(gicd_base, intr_num,
	current_prop->intr_pri);

	/* Target (E)SPIs to the primary CPU */
	gic_affinity_val =
	gicd_irouter_val_from_mpidr(read_mpidr(), 0U);
	gicd_write_irouter(gicd_base, intr_num,
	gic_affinity_val);

	/* Enable this interrupt */
	gicd_set_isenabler(gicd_base, intr_num);
	}

	return ctlr_enable;
	}

	/*******************************************************************************
	* Helper function to configure the default attributes of (E)SPIs
	******************************************************************************/
	void gicv3_ppi_sgi_config_defaults(uintptr_t gicr_base)
	{
	unsigned int i, ppi_regs_num, regs_num;

	#if GIC_EXT_INTID
	/* Calculate number of PPI registers */
	ppi_regs_num = (unsigned int)((gicr_read_typer(gicr_base) >>
	TYPER_PPI_NUM_SHIFT) & TYPER_PPI_NUM_MASK) + 1;
	/* All other values except PPInum [0-2] are reserved */
	if (ppi_regs_num > 3U) {
	ppi_regs_num = 1U;
	}
	#else
	ppi_regs_num = 1U;
	#endif
	/*
	* Disable all SGIs (imp. def.)/(E)PPIs before configuring them.
	* This is a more scalable approach as it avoids clearing
	* the enable bits in the GICD_CTLR.
	*/
	for (i = 0U; i < ppi_regs_num; ++i) {
	gicr_write_icenabler(gicr_base, i, ~0U);
	}

	/* Wait for pending writes to GICR_ICENABLER */
	gicr_wait_for_pending_write(gicr_base);

	/* 32 interrupt IDs per GICR_IGROUPR register */
	for (i = 0U; i < ppi_regs_num; ++i) {
	/* Treat all SGIs/(E)PPIs as G1NS by default */
	gicr_write_igroupr(gicr_base, i, ~0U);
	}

	/* 4 interrupt IDs per GICR_IPRIORITYR register */
	regs_num = ppi_regs_num << 3;
	for (i = 0U; i < regs_num; ++i) {
	/* Setup the default (E)PPI/SGI priorities doing 4 at a time */
	gicr_write_ipriorityr(gicr_base, i, GICD_IPRIORITYR_DEF_VAL);
	}

	/* 16 interrupt IDs per GICR_ICFGR register */
	regs_num = ppi_regs_num << 1;
	for (i = (MIN_PPI_ID >> ICFGR_SHIFT); i < regs_num; ++i) {
	/* Configure all (E)PPIs as level triggered by default */
	gicr_write_icfgr(gicr_base, i, 0U);
	}
	}

	/*******************************************************************************
	* Helper function to configure properties of secure G0 and G1S (E)PPIs and SGIs
	******************************************************************************/
	unsigned int gicv3_secure_ppi_sgi_config_props(uintptr_t gicr_base,
	const interrupt_prop_t *interrupt_props,
	unsigned int interrupt_props_num)
	{
	unsigned int i;
	const interrupt_prop_t *current_prop;
	unsigned int ctlr_enable = 0U;

	/* Make sure there's a valid property array */
	if (interrupt_props_num > 0U) {
	assert(interrupt_props != NULL);
	}

	for (i = 0U; i < interrupt_props_num; i++) {
	current_prop = &interrupt_props[i];

	unsigned int intr_num = current_prop->intr_num;

	/* Skip (E)SPI interrupt */
	if (!IS_SGI_PPI(intr_num)) {
	continue;
	}

	/* Configure this interrupt as a secure interrupt */
	gicr_clr_igroupr(gicr_base, intr_num);

	/* Configure this interrupt as G0 or a G1S interrupt */
	assert((current_prop->intr_grp == INTR_GROUP0) \|\|
	(current_prop->intr_grp == INTR_GROUP1S));

	if (current_prop->intr_grp == INTR_GROUP1S) {
	gicr_set_igrpmodr(gicr_base, intr_num);
	ctlr_enable \|= CTLR_ENABLE_G1S_BIT;
	} else {
	gicr_clr_igrpmodr(gicr_base, intr_num);
	ctlr_enable \|= CTLR_ENABLE_G0_BIT;
	}

	/* Set the priority of this interrupt */
	gicr_set_ipriorityr(gicr_base, intr_num,
	current_prop->intr_pri);

	/*
	* Set interrupt configuration for (E)PPIs.
	* Configurations for SGIs 0-15 are ignored.
	*/
	if (intr_num >= MIN_PPI_ID) {
	gicr_set_icfgr(gicr_base, intr_num,
	current_prop->intr_cfg);
	}

	/* Enable this interrupt */
	gicr_set_isenabler(gicr_base, intr_num);
	}

	return ctlr_enable;
	}

	/**
	* gicv3_rdistif_get_number_frames() - determine size of GICv3 GICR region
	* @gicr_frame: base address of the GICR region to check
	*
	* This iterates over the GICR_TYPER registers of multiple GICR frames in
	* a GICR region, to find the instance which has the LAST bit set. For most
	* systems this corresponds to the number of cores handled by a redistributor,
	* but there could be disabled cores among them.
	* It assumes that each GICR region is fully accessible (till the LAST bit
	* marks the end of the region).
	* If a platform has multiple GICR regions, this function would need to be
	* called multiple times, providing the respective GICR base address each time.
	*
	* Return: number of valid GICR frames (at least 1, up to PLATFORM_CORE_COUNT)
	******************************************************************************/
	unsigned int gicv3_rdistif_get_number_frames(const uintptr_t gicr_frame)
	{
	uintptr_t rdistif_base = gicr_frame;
	unsigned int count;

	for (count = 1; count < PLATFORM_CORE_COUNT; count++) {
	if ((gicr_read_typer(rdistif_base) & TYPER_LAST_BIT) != 0U) {
	break;
	}
	rdistif_base += (1U << GICR_PCPUBASE_SHIFT);
	}

	return count;
	}