| /* |
| * Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <arch.h> |
| #include <bl_common.h> |
| #include <el3_common_macros.S> |
| #include <platform_def.h> |
| #include <pmf_asm_macros.S> |
| #include <runtime_instr.h> |
| #include <xlat_mmu_helpers.h> |
| |
| .globl bl31_entrypoint |
| .globl bl31_warm_entrypoint |
| |
| /* ----------------------------------------------------- |
| * bl31_entrypoint() is the cold boot entrypoint, |
| * executed only by the primary cpu. |
| * ----------------------------------------------------- |
| */ |
| |
| func bl31_entrypoint |
| #if !RESET_TO_BL31 |
| /* --------------------------------------------------------------- |
| * Stash the previous bootloader arguments x0 - x3 for later use. |
| * --------------------------------------------------------------- |
| */ |
| mov x20, x0 |
| mov x21, x1 |
| mov x22, x2 |
| mov x23, x3 |
| |
| /* --------------------------------------------------------------------- |
| * For !RESET_TO_BL31 systems, only the primary CPU ever reaches |
| * bl31_entrypoint() during the cold boot flow, so the cold/warm boot |
| * and primary/secondary CPU logic should not be executed in this case. |
| * |
| * Also, assume that the previous bootloader has already initialised the |
| * SCTLR_EL3, including the endianness, and has initialised the memory. |
| * --------------------------------------------------------------------- |
| */ |
| el3_entrypoint_common \ |
| _init_sctlr=0 \ |
| _warm_boot_mailbox=0 \ |
| _secondary_cold_boot=0 \ |
| _init_memory=0 \ |
| _init_c_runtime=1 \ |
| _exception_vectors=runtime_exceptions |
| #else |
| /* --------------------------------------------------------------------- |
| * For RESET_TO_BL31 systems which have a programmable reset address, |
| * bl31_entrypoint() is executed only on the cold boot path so we can |
| * skip the warm boot mailbox mechanism. |
| * --------------------------------------------------------------------- |
| */ |
| el3_entrypoint_common \ |
| _init_sctlr=1 \ |
| _warm_boot_mailbox=!PROGRAMMABLE_RESET_ADDRESS \ |
| _secondary_cold_boot=!COLD_BOOT_SINGLE_CPU \ |
| _init_memory=1 \ |
| _init_c_runtime=1 \ |
| _exception_vectors=runtime_exceptions |
| |
| /* --------------------------------------------------------------------- |
| * For RESET_TO_BL31 systems, BL31 is the first bootloader to run so |
| * there's no argument to relay from a previous bootloader. Zero the |
| * arguments passed to the platform layer to reflect that. |
| * --------------------------------------------------------------------- |
| */ |
| mov x20, 0 |
| mov x21, 0 |
| mov x22, 0 |
| mov x23, 0 |
| #endif /* RESET_TO_BL31 */ |
| |
| /* -------------------------------------------------------------------- |
| * If PIE is enabled, fixup the Global descriptor Table and dynamic |
| * relocations |
| * -------------------------------------------------------------------- |
| */ |
| #if ENABLE_PIE |
| mov_imm x0, BL31_BASE |
| mov_imm x1, BL31_LIMIT |
| bl fixup_gdt_reloc |
| #endif /* ENABLE_PIE */ |
| |
| /* --------------------------------------------- |
| * Perform platform specific early arch. setup |
| * --------------------------------------------- |
| */ |
| mov x0, x20 |
| mov x1, x21 |
| mov x2, x22 |
| mov x3, x23 |
| bl bl31_early_platform_setup2 |
| bl bl31_plat_arch_setup |
| |
| /* --------------------------------------------- |
| * Jump to main function. |
| * --------------------------------------------- |
| */ |
| bl bl31_main |
| |
| /* ------------------------------------------------------------- |
| * Clean the .data & .bss sections to main memory. This ensures |
| * that any global data which was initialised by the primary CPU |
| * is visible to secondary CPUs before they enable their data |
| * caches and participate in coherency. |
| * ------------------------------------------------------------- |
| */ |
| adr x0, __DATA_START__ |
| adr x1, __DATA_END__ |
| sub x1, x1, x0 |
| bl clean_dcache_range |
| |
| adr x0, __BSS_START__ |
| adr x1, __BSS_END__ |
| sub x1, x1, x0 |
| bl clean_dcache_range |
| |
| b el3_exit |
| endfunc bl31_entrypoint |
| |
| /* -------------------------------------------------------------------- |
| * This CPU has been physically powered up. It is either resuming from |
| * suspend or has simply been turned on. In both cases, call the BL31 |
| * warmboot entrypoint |
| * -------------------------------------------------------------------- |
| */ |
| func bl31_warm_entrypoint |
| #if ENABLE_RUNTIME_INSTRUMENTATION |
| |
| /* |
| * This timestamp update happens with cache off. The next |
| * timestamp collection will need to do cache maintenance prior |
| * to timestamp update. |
| */ |
| pmf_calc_timestamp_addr rt_instr_svc, RT_INSTR_EXIT_HW_LOW_PWR |
| mrs x1, cntpct_el0 |
| str x1, [x0] |
| #endif |
| |
| /* |
| * On the warm boot path, most of the EL3 initialisations performed by |
| * 'el3_entrypoint_common' must be skipped: |
| * |
| * - Only when the platform bypasses the BL1/BL31 entrypoint by |
| * programming the reset address do we need to initialise SCTLR_EL3. |
| * In other cases, we assume this has been taken care by the |
| * entrypoint code. |
| * |
| * - No need to determine the type of boot, we know it is a warm boot. |
| * |
| * - Do not try to distinguish between primary and secondary CPUs, this |
| * notion only exists for a cold boot. |
| * |
| * - No need to initialise the memory or the C runtime environment, |
| * it has been done once and for all on the cold boot path. |
| */ |
| el3_entrypoint_common \ |
| _init_sctlr=PROGRAMMABLE_RESET_ADDRESS \ |
| _warm_boot_mailbox=0 \ |
| _secondary_cold_boot=0 \ |
| _init_memory=0 \ |
| _init_c_runtime=0 \ |
| _exception_vectors=runtime_exceptions |
| |
| /* |
| * We're about to enable MMU and participate in PSCI state coordination. |
| * |
| * The PSCI implementation invokes platform routines that enable CPUs to |
| * participate in coherency. On a system where CPUs are not |
| * cache-coherent without appropriate platform specific programming, |
| * having caches enabled until such time might lead to coherency issues |
| * (resulting from stale data getting speculatively fetched, among |
| * others). Therefore we keep data caches disabled even after enabling |
| * the MMU for such platforms. |
| * |
| * On systems with hardware-assisted coherency, or on single cluster |
| * platforms, such platform specific programming is not required to |
| * enter coherency (as CPUs already are); and there's no reason to have |
| * caches disabled either. |
| */ |
| #if HW_ASSISTED_COHERENCY || WARMBOOT_ENABLE_DCACHE_EARLY |
| mov x0, xzr |
| #else |
| mov x0, #DISABLE_DCACHE |
| #endif |
| bl bl31_plat_enable_mmu |
| |
| bl psci_warmboot_entrypoint |
| |
| #if ENABLE_RUNTIME_INSTRUMENTATION |
| pmf_calc_timestamp_addr rt_instr_svc, RT_INSTR_EXIT_PSCI |
| mov x19, x0 |
| |
| /* |
| * Invalidate before updating timestamp to ensure previous timestamp |
| * updates on the same cache line with caches disabled are properly |
| * seen by the same core. Without the cache invalidate, the core might |
| * write into a stale cache line. |
| */ |
| mov x1, #PMF_TS_SIZE |
| mov x20, x30 |
| bl inv_dcache_range |
| mov x30, x20 |
| |
| mrs x0, cntpct_el0 |
| str x0, [x19] |
| #endif |
| b el3_exit |
| endfunc bl31_warm_entrypoint |