blob: 5a44907f650006308ef6c3bc01dca4c2d8b18f8c [file] [log] [blame]
/*
* Copyright (c) 2015-2023, ARM Limited and Contributors. All rights reserved.
*
* Copyright (C) 2017-2023 Nuvoton Ltd.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef NPCM845x_ARM_DEF_H
#define NPCM845x_ARM_DEF_H
#include <arch.h>
#include <common/interrupt_props.h>
#include <common/tbbr/tbbr_img_def.h>
#include <drivers/arm/gic_common.h>
#include <lib/utils_def.h>
#include <lib/xlat_tables/xlat_tables_defs.h>
#include <plat/arm/common/smccc_def.h>
#include <plat/common/common_def.h>
/* This flag will add zones to the MMU so that it will be possible to debug */
#ifdef NPCM845X_DEBUG
#define ALLOW_DEBUG_MMU
#undef ALLOW_DEBUG_MMU
#endif /* NPCM845X_DEBUG */
#undef CONFIG_TARGET_ARBEL_PALLADIUM
/******************************************************************************
* Definitions common to all ARM standard platforms
*****************************************************************************/
/*
* Root of trust key hash lengths
*/
#define ARM_ROTPK_HEADER_LEN 19
#define ARM_ROTPK_HASH_LEN 32
/* Special value used to verify platform parameters from BL2 to BL31 */
#define ARM_BL31_PLAT_PARAM_VAL ULL(0x0f1e2d3c4b5a6978)
/* No need for system because we have only one cluster */
#define ARM_SYSTEM_COUNT U(0)
#define ARM_CACHE_WRITEBACK_SHIFT 6
/*
* Macros mapping the MPIDR Affinity levels to ARM Platform Power levels.
* The power levels have a 1:1 mapping with the MPIDR affinity levels.
*/
/* In NPCM845x - refers to cores */
#define ARM_PWR_LVL0 MPIDR_AFFLVL0
/* In NPCM845x - refers to cluster */
#define ARM_PWR_LVL1 MPIDR_AFFLVL1
/* No need for additional settings because the platform doesn't have system */
/*
* Macros for local power states in ARM platforms encoded by State-ID field
* within the power-state parameter.
*/
#define NPCM845x_PLAT_PRIMARY_CPU U(0x0)
#define NPCM845x_CLUSTER_COUNT U(1)
#ifdef SECONDARY_BRINGUP
#define NPCM845x_MAX_CPU_PER_CLUSTER U(2)
#define NPCM845x_PLATFORM_CORE_COUNT U(2)
#define NPCM845x_PLATFORM_CLUSTER0_CORE_COUNT U(2)
#else
#define NPCM845x_MAX_CPU_PER_CLUSTER U(4)
#define NPCM845x_PLATFORM_CORE_COUNT U(4)
#define NPCM845x_PLATFORM_CLUSTER0_CORE_COUNT U(4)
#endif /* SECONDARY_BRINGUP */
#define NPCM845x_SYSTEM_COUNT U(0)
/* Memory mapping for NPCM845x */
#define NPCM845x_REG_BASE 0xf0000000
#define NPCM845x_REG_SIZE 0x0ff16000
/*
* DRAM
* 0x3fffffff +-------------+
* | BL33 | (non-secure)
* 0x06200000 +-------------+
* | BL32 SHARED | (non-secure)
* 0x06000000 +-------------+
* | BL32 | (secure)
* 0x02100000 +-------------+
* | BL31 | (secure)
* 0x02000000 +-------------+
* | | (non-secure)
* 0x00000000 +-------------+
*
* Trusted ROM
* 0xfff50000 +-------------+
* | BL1 (ro) |
* 0xfff40000 +-------------+
*/
#define ARM_DRAM1_BASE ULL(0x00000000)
#ifndef CONFIG_TARGET_ARBEL_PALLADIUM
/*
* Although npcm845x is 4G,
* consider only 2G Trusted Firmware memory allocation
*/
#define ARM_DRAM1_SIZE ULL(0x37000000)
#else
#define ARM_DRAM1_SIZE ULL(0x10000000)
#define ARM_DRAM1_END (ARM_DRAM1_BASE + ARM_DRAM1_SIZE - 1U)
#endif /* CONFIG_TARGET_ARBEL_PALLADIUM */
/*
* The top 16MB of DRAM1 is configured as secure access only using the TZC
* - SCP TZC DRAM: If present, DRAM reserved for SCP use
* - AP TZC DRAM: The remaining TZC secured DRAM reserved for AP use
*/
/* Check for redundancy */
#ifdef NPCM845X_DEBUG
#define PLAT_ARM_NS_IMAGE_BASE 0x0
#endif /* NPCM845X_DEBUG */
#define ARM_TZC_DRAM1_SIZE UL(0x01000000)
#define ARM_SCP_TZC_DRAM1_SIZE PLAT_ARM_SCP_TZC_DRAM1_SIZE
#define ARM_SCP_TZC_DRAM1_END (ARM_SCP_TZC_DRAM1_BASE + \
ARM_SCP_TZC_DRAM1_SIZE - 1U)
/*
* Define a 2MB region within the TZC secured DRAM for use by EL3 runtime
* firmware. This region is meant to be NOLOAD and will not be zero
* initialized. Data sections with the attribute `arm_el3_tzc_dram`
* will be placed here.
*
* NPCM845x - Currently the platform doesn't have EL3 implementation
* on secured DRAM.
*/
#define ARM_EL3_TZC_DRAM1_BASE (ARM_SCP_TZC_DRAM1_BASE - \
ARM_EL3_TZC_DRAM1_SIZE)
#define ARM_EL3_TZC_DRAM1_SIZE UL(0x00200000) /* 2 MB */
#define ARM_EL3_TZC_DRAM1_END (ARM_EL3_TZC_DRAM1_BASE + \
ARM_EL3_TZC_DRAM1_SIZE - 1U)
#define ARM_AP_TZC_DRAM1_BASE 0x02100000
#define ARM_AP_TZC_DRAM1_SIZE (ARM_TZC_DRAM1_SIZE - \
(ARM_SCP_TZC_DRAM1_SIZE + \
ARM_EL3_TZC_DRAM1_SIZE))
#define ARM_AP_TZC_DRAM1_END (ARM_AP_TZC_DRAM1_BASE + \
ARM_AP_TZC_DRAM1_SIZE - 1U)
/* Define the Access permissions for Secure peripherals to NS_DRAM */
#define ARM_TZC_NS_DRAM_S_ACCESS TZC_REGION_S_NONE
#ifdef SPD_opteed
/*
* BL2 needs to map 4MB at the end of TZC_DRAM1 in order to
* load/authenticate the trusted os extra image. The first 512KB of
* TZC_DRAM1 are reserved for trusted os (OPTEE). The extra image loading
* for OPTEE is paged image which only include the paging part using
* virtual memory but without "init" data. OPTEE will copy the "init" data
* (from pager image) to the first 512KB of TZC_DRAM, and then copy the
* extra image behind the "init" data.
*/
#define TSP_SEC_MEM_BASE ARM_AP_TZC_DRAM1_BASE
#define TSP_SEC_MEM_SIZE ARM_AP_TZC_DRAM1_SIZE
#define BL32_BASE ARM_AP_TZC_DRAM1_BASE
#define BL32_LIMIT (ARM_AP_TZC_DRAM1_BASE + \
ARM_AP_TZC_DRAM1_SIZE)
#define ARM_OPTEE_PAGEABLE_LOAD_BASE ( \
ARM_AP_TZC_DRAM1_BASE + ARM_AP_TZC_DRAM1_SIZE - \
ARM_OPTEE_PAGEABLE_LOAD_SIZE)
#define ARM_OPTEE_PAGEABLE_LOAD_SIZE UL(0x400000)
#define ARM_OPTEE_PAGEABLE_LOAD_MEM MAP_REGION_FLAT( \
ARM_OPTEE_PAGEABLE_LOAD_BASE, \
ARM_OPTEE_PAGEABLE_LOAD_SIZE, \
MT_MEMORY | MT_RW | MT_SECURE)
/*
* Map the memory for the OP-TEE core (also known as OP-TEE pager
* when paging support is enabled).
*/
#define ARM_MAP_OPTEE_CORE_MEM MAP_REGION_FLAT( \
BL32_BASE, BL32_LIMIT - BL32_BASE, \
MT_MEMORY | MT_RW | MT_SECURE)
#endif /* SPD_opteed */
#define ARM_NS_DRAM1_BASE ARM_DRAM1_BASE
#define ARM_NS_DRAM1_SIZE (ARM_DRAM1_SIZE - \
ARM_TZC_DRAM1_SIZE)
#define ARM_NS_DRAM1_END (ARM_NS_DRAM1_BASE + \
ARM_NS_DRAM1_SIZE - 1U)
/* The platform doesn't use DRAM2 but it has to have a value for calculation */
#define ARM_DRAM2_BASE 0 /* PLAT_ARM_DRAM_BASE */
#define ARM_DRAM2_SIZE 1 /* PLAT_ARM_DRAM_SIZE */
#define ARM_DRAM2_END (ARM_DRAM2_BASE + ARM_DRAM2_SIZE - 1U)
#define FIRST_EXT_INTERRUPT_NUM U(32)
#define ARM_IRQ_SEC_PHY_TIMER (U(29) + FIRST_EXT_INTERRUPT_NUM)
#define ARM_IRQ_SEC_SGI_0 8
#define ARM_IRQ_SEC_SGI_1 9
#define ARM_IRQ_SEC_SGI_2 10
#define ARM_IRQ_SEC_SGI_3 11
#define ARM_IRQ_SEC_SGI_4 12
#define ARM_IRQ_SEC_SGI_5 13
#define ARM_IRQ_SEC_SGI_6 14
#define ARM_IRQ_SEC_SGI_7 15
/*
* Define a list of Group 1 Secure and Group 0 interrupt properties
* as per GICv3 terminology. On a GICv2 system or mode,
* the lists will be merged and treated as Group 0 interrupts.
*/
#define ARM_G1S_IRQ_PROPS(grp) \
INTR_PROP_DESC(ARM_IRQ_SEC_PHY_TIMER, \
GIC_HIGHEST_SEC_PRIORITY, (grp), GIC_INTR_CFG_LEVEL), \
INTR_PROP_DESC(ARM_IRQ_SEC_SGI_1, \
GIC_HIGHEST_SEC_PRIORITY, (grp), GIC_INTR_CFG_EDGE), \
INTR_PROP_DESC(ARM_IRQ_SEC_SGI_2, \
GIC_HIGHEST_SEC_PRIORITY, (grp), GIC_INTR_CFG_EDGE), \
INTR_PROP_DESC(ARM_IRQ_SEC_SGI_3, \
GIC_HIGHEST_SEC_PRIORITY, (grp), GIC_INTR_CFG_EDGE), \
INTR_PROP_DESC(ARM_IRQ_SEC_SGI_4, \
GIC_HIGHEST_SEC_PRIORITY, (grp), GIC_INTR_CFG_EDGE), \
INTR_PROP_DESC(ARM_IRQ_SEC_SGI_5, \
GIC_HIGHEST_SEC_PRIORITY, (grp), GIC_INTR_CFG_EDGE), \
INTR_PROP_DESC(ARM_IRQ_SEC_SGI_7, \
GIC_HIGHEST_SEC_PRIORITY, (grp), GIC_INTR_CFG_EDGE)
#define ARM_G0_IRQ_PROPS(grp) \
INTR_PROP_DESC(ARM_IRQ_SEC_SGI_0, \
PLAT_SDEI_NORMAL_PRI, (grp), GIC_INTR_CFG_EDGE), \
INTR_PROP_DESC(ARM_IRQ_SEC_SGI_6, \
GIC_HIGHEST_SEC_PRIORITY, (grp), GIC_INTR_CFG_EDGE)
#define ARM_MAP_SHARED_RAM MAP_REGION_FLAT( \
ARM_SHARED_RAM_BASE, ARM_SHARED_RAM_SIZE, \
MT_DEVICE | MT_RW | MT_SECURE)
#ifdef ALLOW_DEBUG_MMU
/* In order to be able to debug,
* the platform needs to add BL33 and BL32 to MMU as well.
*/
#define ARM_MAP_NS_DRAM1 MAP_REGION_FLAT( \
ARM_NS_DRAM1_BASE, ARM_NS_DRAM1_SIZE, \
MT_MEMORY | MT_RW | MT_NS)
#ifdef BL32_BASE
#define ARM_MAP_BL32_CORE_MEM MAP_REGION_FLAT( \
BL32_BASE, BL32_LIMIT - BL32_BASE, \
MT_MEMORY | MT_RW | MT_SECURE)
#endif /* BL32_BASE */
#ifdef NPCM845X_DEBUG
#define ARM_MAP_SEC_BB_MEM MAP_REGION_FLAT( \
0xFFFB0000, 0x20000, \
MT_MEMORY | MT_RW | MT_NS)
#endif /* NPCM845X_DEBUG */
#endif /* BL32_BASE */
#define ARM_MAP_DRAM2 MAP_REGION_FLAT( \
ARM_DRAM2_BASE, ARM_DRAM2_SIZE, \
MT_MEMORY | MT_RW | MT_NS)
#define ARM_MAP_TSP_SEC_MEM MAP_REGION_FLAT( \
TSP_SEC_MEM_BASE, TSP_SEC_MEM_SIZE, \
MT_MEMORY | MT_RW | MT_SECURE)
#if ARM_BL31_IN_DRAM
#define ARM_MAP_BL31_SEC_DRAM MAP_REGION_FLAT( \
BL31_BASE, PLAT_ARM_MAX_BL31_SIZE, \
MT_MEMORY | MT_RW | MT_SECURE)
#endif /* ARM_BL31_IN_DRAM */
/* Currently the platform doesn't have EL3 implementation on secured DRAM. */
#define ARM_MAP_EL3_TZC_DRAM MAP_REGION_FLAT( \
ARM_EL3_TZC_DRAM1_BASE, \
ARM_EL3_TZC_DRAM1_SIZE, \
MT_MEMORY | MT_RW | MT_SECURE)
#if defined(SPD_spmd)
#define ARM_MAP_TRUSTED_DRAM MAP_REGION_FLAT( \
PLAT_ARM_TRUSTED_DRAM_BASE, \
PLAT_ARM_TRUSTED_DRAM_SIZE, \
MT_MEMORY | MT_RW | MT_SECURE)
#endif /* SPD_spmd */
/*
* Mapping for the BL1 RW region. This mapping is needed by BL2
* in order to share the Mbed TLS heap. Since the heap is allocated
* inside BL1, it resides in the BL1 RW region. Hence, BL2 needs access
* to the BL1 RW region in order to be able to access the heap.
*/
#define ARM_MAP_BL1_RW MAP_REGION_FLAT( \
BL1_RW_BASE, BL1_RW_LIMIT - BL1_RW_BASE, \
MT_MEMORY | MT_RW | EL3_PAS)
/*
* If SEPARATE_CODE_AND_RODATA=1 the platform will define a region
* for each section, otherwise one region containing both sections
* is defined.
*/
#if SEPARATE_CODE_AND_RODATA
#define ARM_MAP_BL_RO MAP_REGION_FLAT( \
BL_CODE_BASE, BL_CODE_END - BL_CODE_BASE, \
MT_CODE | EL3_PAS), \
MAP_REGION_FLAT(BL_RO_DATA_BASE, \
BL_RO_DATA_END - BL_RO_DATA_BASE, \
MT_RO_DATA | EL3_PAS)
#else
#define ARM_MAP_BL_RO MAP_REGION_FLAT( \
BL_CODE_BASE, BL_CODE_END - BL_CODE_BASE, \
MT_CODE | EL3_PAS)
#endif /* SEPARATE_CODE_AND_RODATA */
#if USE_COHERENT_MEM
#define ARM_MAP_BL_COHERENT_RAM MAP_REGION_FLAT( \
BL_COHERENT_RAM_BASE, \
BL_COHERENT_RAM_END - BL_COHERENT_RAM_BASE, \
MT_DEVICE | MT_RW | EL3_PAS)
#endif /* USE_COHERENT_MEM */
#if USE_ROMLIB
#define ARM_MAP_ROMLIB_CODE MAP_REGION_FLAT( \
ROMLIB_RO_BASE, \
ROMLIB_RO_LIMIT - ROMLIB_RO_BASE, \
MT_CODE | MT_SECURE)
#define ARM_MAP_ROMLIB_DATA MAP_REGION_FLAT( \
ROMLIB_RW_BASE, \
ROMLIB_RW_END - ROMLIB_RW_BASE, \
MT_MEMORY | MT_RW | MT_SECURE)
#endif /* USE_ROMLIB */
/*
* Map mem_protect flash region with read and write permissions
*/
#define ARM_V2M_MAP_MEM_PROTECT MAP_REGION_FLAT( \
PLAT_ARM_MEM_PROT_ADDR, \
V2M_FLASH_BLOCK_SIZE, \
MT_DEVICE | MT_RW | MT_SECURE)
/*
* Map the region for device tree configuration with read and write permissions
*/
#define ARM_MAP_BL_CONFIG_REGION MAP_REGION_FLAT( \
ARM_BL_RAM_BASE, \
(ARM_FW_CONFIGS_LIMIT - ARM_BL_RAM_BASE), \
MT_MEMORY | MT_RW | MT_SECURE)
/*
* The max number of regions like RO(code), coherent and data required by
* different BL stages which need to be mapped in the MMU.
*/
#define ARM_BL_REGIONS 10
#define MAX_MMAP_REGIONS ( \
PLAT_ARM_MMAP_ENTRIES + ARM_BL_REGIONS)
/* Memory mapped Generic timer interfaces */
#define ARM_SYS_CNTCTL_BASE UL(0XF07FC000)
#define ARM_CONSOLE_BAUDRATE 115200
/*
* The TBBR document specifies a watchdog timeout of 256 seconds. SP805
* asserts reset after two consecutive countdowns (2 x 128 = 256 sec)
*/
#define ARM_TWDG_TIMEOUT_SEC 128
#define ARM_TWDG_LOAD_VAL (ARM_SP805_TWDG_CLK_HZ * \
ARM_TWDG_TIMEOUT_SEC)
/******************************************************************************
* Required platform porting definitions common to all ARM standard platforms
*****************************************************************************/
/*
* Some data must be aligned on the biggest cache line size in the platform.
* This is known only to the platform as it might have a combination of
* integrated and external caches (64 on Arbel).
*/
#define CACHE_WRITEBACK_GRANULE (U(1) << ARM_CACHE_WRITEBACK_SHIFT)
/*
* To enable FW_CONFIG to be loaded by BL1, define the corresponding base
* and limit. Leave enough space of BL2 meminfo.
*/
#define ARM_FW_CONFIG_BASE (ARM_BL_RAM_BASE + sizeof(meminfo_t))
#define ARM_FW_CONFIG_LIMIT ( \
(ARM_BL_RAM_BASE + PAGE_SIZE) + (PAGE_SIZE / 2U))
/*
* Boot parameters passed from BL2 to BL31/BL32 are stored here
*/
#define ARM_BL2_MEM_DESC_BASE (ARM_FW_CONFIG_LIMIT)
#define ARM_BL2_MEM_DESC_LIMIT ( \
ARM_BL2_MEM_DESC_BASE + (PAGE_SIZE / 2U))
/*
* Define limit of firmware configuration memory:
* ARM_FW_CONFIG + ARM_BL2_MEM_DESC memory
*/
#define ARM_FW_CONFIGS_LIMIT (ARM_BL_RAM_BASE + (PAGE_SIZE * 2))
/*******************************************************************************
* BL1 specific defines.
* BL1 RW data is relocated from ROM to RAM at runtime so we need
* two sets of addresses.
******************************************************************************/
#define BL1_RO_BASE PLAT_ARM_TRUSTED_ROM_BASE
#define BL1_RO_LIMIT (PLAT_ARM_TRUSTED_ROM_BASE + \
(PLAT_ARM_TRUSTED_ROM_SIZE - PLAT_ARM_MAX_ROMLIB_RO_SIZE))
/*
* Put BL1 RW at the top of the Trusted SRAM.
*/
#define BL1_RW_BASE (ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE - \
(PLAT_ARM_MAX_BL1_RW_SIZE + PLAT_ARM_MAX_ROMLIB_RW_SIZE))
#define BL1_RW_LIMIT (ARM_BL_RAM_BASE + \
(ARM_BL_RAM_SIZE - PLAT_ARM_MAX_ROMLIB_RW_SIZE))
#define ROMLIB_RO_BASE BL1_RO_LIMIT
#define ROMLIB_RO_LIMIT ( \
PLAT_ARM_TRUSTED_ROM_BASE + PLAT_ARM_TRUSTED_ROM_SIZE)
#define ROMLIB_RW_BASE (BL1_RW_BASE + PLAT_ARM_MAX_BL1_RW_SIZE)
#define ROMLIB_RW_END ( \
ROMLIB_RW_BASE + PLAT_ARM_MAX_ROMLIB_RW_SIZE)
/******************************************************************************
* BL2 specific defines.
*****************************************************************************/
#if BL2_AT_EL3
/* Put BL2 towards the middle of the Trusted SRAM */
#define BL2_BASE (ARM_TRUSTED_SRAM_BASE + \
PLAT_ARM_TRUSTED_SRAM_SIZE >> 1) + 0x2000)
#define BL2_LIMIT (ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE)
#else
/*
* Put BL2 just below BL1.
*/
#define BL2_BASE (BL1_RW_BASE - PLAT_ARM_MAX_BL2_SIZE)
#define BL2_LIMIT BL1_RW_BASE
#endif /* BL2_AT_EL3 */
/*******************************************************************************
* BL31 specific defines.
******************************************************************************/
#if ARM_BL31_IN_DRAM || SEPARATE_NOBITS_REGION
/*
* Put BL31 at the bottom of TZC secured DRAM
*/
#define BL31_BASE ARM_AP_TZC_DRAM1_BASE
#define BL31_LIMIT ( \
ARM_AP_TZC_DRAM1_BASE + PLAT_ARM_MAX_BL31_SIZE)
/*
* For SEPARATE_NOBITS_REGION, BL31 PROGBITS are loaded in TZC secured DRAM.
* And BL31 NOBITS are loaded in Trusted SRAM such that BL2 is overwritten.
*/
#if SEPARATE_NOBITS_REGION
#define BL31_NOBITS_BASE BL2_BASE
#define BL31_NOBITS_LIMIT BL2_LIMIT
#endif /* SEPARATE_NOBITS_REGION */
#elif (RESET_TO_BL31)
/* Ensure Position Independent support (PIE) is enabled for this config.*/
#if !ENABLE_PIE
#error "BL31 must be a PIE if RESET_TO_BL31=1."
#endif /* !ENABLE_PIE */
/*
* Since this is PIE, we can define BL31_BASE to 0x0 since this macro is solely
* used for building BL31 and not used for loading BL31.
*/
#define NEW_SRAM_ALLOCATION
#ifdef NEW_SRAM_ALLOCATION
#define BL31_BASE 0x20001000
#else
#define BL31_BASE 0x20001000
#endif /* NEW_SRAM_ALLOCATION */
#define BL31_LIMIT BL2_BASE /* PLAT_ARM_MAX_BL31_SIZE */
#else
/* Put BL31 below BL2 in the Trusted SRAM.*/
#define BL31_BASE ((ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE) - \
PLAT_ARM_MAX_BL31_SIZE)
#define BL31_PROGBITS_LIMIT BL2_BASE
/*
* For BL2_AT_EL3 make sure the BL31 can grow up until BL2_BASE.
* This is because in the BL2_AT_EL3 configuration, BL2 is always resident.
*/
#if BL2_AT_EL3
#define BL31_LIMIT BL2_BASE
#else
#define BL31_LIMIT (ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE)
#endif /* BL2_AT_EL3 */
#endif /* ARM_BL31_IN_DRAM || SEPARATE_NOBITS_REGION */
/*
* BL32 is mandatory in AArch32. In AArch64, undefine BL32_BASE if there is
* no SPD and no SPM-MM, as they are the only ones that can be used as BL32.
*/
#if defined(SPD_none) && !SPM_MM
#undef BL32_BASE
#endif /* SPD_none && !SPM_MM */
/******************************************************************************
* FWU Images: NS_BL1U, BL2U & NS_BL2U defines.
*****************************************************************************/
#define BL2U_BASE BL2_BASE
#define BL2U_LIMIT BL2_LIMIT
#define NS_BL2U_BASE ARM_NS_DRAM1_BASE
#define NS_BL1U_BASE (PLAT_ARM_NVM_BASE + UL(0x03EB8000))
/*
* ID of the secure physical generic timer interrupt used by the TSP.
*/
#define TSP_IRQ_SEC_PHY_TIMER ARM_IRQ_SEC_PHY_TIMER
/*
* One cache line needed for bakery locks on ARM platforms
*/
#define PLAT_PERCPU_BAKERY_LOCK_SIZE (1 * CACHE_WRITEBACK_GRANULE)
/* Priority levels for ARM platforms */
#define PLAT_RAS_PRI 0x10
#define PLAT_SDEI_CRITICAL_PRI 0x60
#define PLAT_SDEI_NORMAL_PRI 0x70
/* ARM platforms use 3 upper bits of secure interrupt priority */
#define ARM_PRI_BITS 3
/* SGI used for SDEI signalling */
#define ARM_SDEI_SGI ARM_IRQ_SEC_SGI_0
#if SDEI_IN_FCONF
/* ARM SDEI dynamic private event max count */
#define ARM_SDEI_DP_EVENT_MAX_CNT 3
/* ARM SDEI dynamic shared event max count */
#define ARM_SDEI_DS_EVENT_MAX_CNT 3
#else
/* ARM SDEI dynamic private event numbers */
#define ARM_SDEI_DP_EVENT_0 1000
#define ARM_SDEI_DP_EVENT_1 1001
#define ARM_SDEI_DP_EVENT_2 1002
/* ARM SDEI dynamic shared event numbers */
#define ARM_SDEI_DS_EVENT_0 2000
#define ARM_SDEI_DS_EVENT_1 2001
#define ARM_SDEI_DS_EVENT_2 2002
#define ARM_SDEI_PRIVATE_EVENTS \
SDEI_DEFINE_EVENT_0(ARM_SDEI_SGI), \
SDEI_PRIVATE_EVENT(ARM_SDEI_DP_EVENT_0, SDEI_DYN_IRQ, SDEI_MAPF_DYNAMIC), \
SDEI_PRIVATE_EVENT(ARM_SDEI_DP_EVENT_1, SDEI_DYN_IRQ, SDEI_MAPF_DYNAMIC), \
SDEI_PRIVATE_EVENT(ARM_SDEI_DP_EVENT_2, SDEI_DYN_IRQ, SDEI_MAPF_DYNAMIC)
#define ARM_SDEI_SHARED_EVENTS \
SDEI_SHARED_EVENT(ARM_SDEI_DS_EVENT_0, SDEI_DYN_IRQ, SDEI_MAPF_DYNAMIC), \
SDEI_SHARED_EVENT(ARM_SDEI_DS_EVENT_1, SDEI_DYN_IRQ, SDEI_MAPF_DYNAMIC), \
SDEI_SHARED_EVENT(ARM_SDEI_DS_EVENT_2, SDEI_DYN_IRQ, SDEI_MAPF_DYNAMIC)
#endif /* SDEI_IN_FCONF */
#endif /* ARM_DEF_H */