blob: b6e4b0d84ad25e303bbedb5ff9a20e0e729c2ad0 [file] [log] [blame]
STM32MP1
========
STM32MP1 is a microprocessor designed by STMicroelectronics
based on Arm Cortex-A7.
It is an Armv7-A platform, using dedicated code from TF-A.
More information can be found on `STM32MP1 Series`_ page.
For TF-A common configuration of STM32 MPUs, please check
:ref:`STM32 MPUs` page.
STM32MP1 Versions
-----------------
There are 2 variants for STM32MP1: STM32MP13 and STM32MP15
STM32MP13 Versions
~~~~~~~~~~~~~~~~~~
The STM32MP13 series is available in 3 different lines which are pin-to-pin compatible:
- STM32MP131: Single Cortex-A7 core
- STM32MP133: STM32MP131 + 2*CAN, ETH2(GMAC), ADC1
- STM32MP135: STM32MP133 + DCMIPP, LTDC
Each line comes with a security option (cryptography & secure boot) and a Cortex-A frequency option:
- A Cortex-A7 @ 650 MHz
- C Secure Boot + HW Crypto + Cortex-A7 @ 650 MHz
- D Cortex-A7 @ 900 MHz
- F Secure Boot + HW Crypto + Cortex-A7 @ 900 MHz
STM32MP15 Versions
~~~~~~~~~~~~~~~~~~
The STM32MP15 series is available in 3 different lines which are pin-to-pin compatible:
- STM32MP157: Dual Cortex-A7 cores, Cortex-M4 core @ 209 MHz, 3D GPU, DSI display interface and CAN FD
- STM32MP153: Dual Cortex-A7 cores, Cortex-M4 core @ 209 MHz and CAN FD
- STM32MP151: Single Cortex-A7 core, Cortex-M4 core @ 209 MHz
Each line comes with a security option (cryptography & secure boot) and a Cortex-A frequency option:
- A Basic + Cortex-A7 @ 650 MHz
- C Secure Boot + HW Crypto + Cortex-A7 @ 650 MHz
- D Basic + Cortex-A7 @ 800 MHz
- F Secure Boot + HW Crypto + Cortex-A7 @ 800 MHz
The `STM32MP1 part number codification`_ page gives more information about part numbers.
Memory mapping
--------------
::
0x00000000 +-----------------+
| | ROM
0x00020000 +-----------------+
| |
| ... |
| |
0x2FFC0000 +-----------------+ \
| BL32 DTB | |
0x2FFC5000 +-----------------+ |
| BL32 | |
0x2FFDF000 +-----------------+ |
| ... | |
0x2FFE3000 +-----------------+ |
| BL2 DTB | | Embedded SRAM
0x2FFEA000 +-----------------+ |
| BL2 | |
0x2FFFF000 +-----------------+ |
| SCMI mailbox | |
0x30000000 +-----------------+ /
| |
| ... |
| |
0x40000000 +-----------------+
| |
| | Devices
| |
0xC0000000 +-----------------+ \
| | |
0xC0100000 +-----------------+ |
| BL33 | | Non-secure RAM (DDR)
| ... | |
| | |
0xFFFFFFFF +-----------------+ /
Build Instructions
------------------
STM32MP1x specific flags
~~~~~~~~~~~~~~~~~~~~~~~~
Dedicated STM32MP1 flags:
- | ``STM32_TF_VERSION``: to manage BL2 monotonic counter.
| Default: 0
- | ``STM32MP13``: to select STM32MP13 variant configuration.
| Default: 0
- | ``STM32MP15``: to select STM32MP15 variant configuration.
| Default: 1
Boot with FIP
~~~~~~~~~~~~~
You need to build BL2, BL32 (SP_min or OP-TEE) and BL33 (U-Boot) before building FIP binary.
U-Boot
______
.. code:: bash
cd <u-boot_directory>
make stm32mp15_trusted_defconfig
make DEVICE_TREE=stm32mp157c-ev1 all
OP-TEE (optional)
_________________
.. code:: bash
cd <optee_directory>
make CROSS_COMPILE=arm-linux-gnueabihf- ARCH=arm PLATFORM=stm32mp1 \
CFG_EMBED_DTB_SOURCE_FILE=stm32mp157c-ev1.dts
TF-A BL32 (SP_min)
__________________
If you choose not to use OP-TEE, you can use TF-A SP_min.
To build TF-A BL32, and its device tree file:
.. code:: bash
make CROSS_COMPILE=arm-none-eabi- PLAT=stm32mp1 ARCH=aarch32 ARM_ARCH_MAJOR=7 \
AARCH32_SP=sp_min DTB_FILE_NAME=stm32mp157c-ev1.dtb bl32 dtbs
TF-A BL2
________
To build TF-A BL2 with its STM32 header for SD-card boot:
.. code:: bash
make CROSS_COMPILE=arm-none-eabi- PLAT=stm32mp1 ARCH=aarch32 ARM_ARCH_MAJOR=7 \
DTB_FILE_NAME=stm32mp157c-ev1.dtb STM32MP_SDMMC=1
For other boot devices, you have to replace STM32MP_SDMMC in the previous command
with the desired device flag.
This BL2 is independent of the BL32 used (SP_min or OP-TEE)
FIP
___
With BL32 SP_min:
.. code:: bash
make CROSS_COMPILE=arm-none-eabi- PLAT=stm32mp1 ARCH=aarch32 ARM_ARCH_MAJOR=7 \
AARCH32_SP=sp_min \
DTB_FILE_NAME=stm32mp157c-ev1.dtb \
BL33=<u-boot_directory>/u-boot-nodtb.bin \
BL33_CFG=<u-boot_directory>/u-boot.dtb \
fip
With OP-TEE:
.. code:: bash
make CROSS_COMPILE=arm-none-eabi- PLAT=stm32mp1 ARCH=aarch32 ARM_ARCH_MAJOR=7 \
AARCH32_SP=optee \
DTB_FILE_NAME=stm32mp157c-ev1.dtb \
BL33=<u-boot_directory>/u-boot-nodtb.bin \
BL33_CFG=<u-boot_directory>/u-boot.dtb \
BL32=<optee_directory>/tee-header_v2.bin \
BL32_EXTRA1=<optee_directory>/tee-pager_v2.bin
BL32_EXTRA2=<optee_directory>/tee-pageable_v2.bin
fip
Trusted Boot Board
__________________
.. code:: shell
tools/cert_create/cert_create -n --rot-key build/stm32mp1/release/rot_key.pem \
--tfw-nvctr 0 \
--ntfw-nvctr 0 \
--key-alg ecdsa --hash-alg sha256 \
--trusted-key-cert build/stm32mp1/release/trusted_key.crt \
--tos-fw <optee_directory>/tee-header_v2.bin \
--tos-fw-extra1 <optee_directory>/tee-pager_v2.bin \
--tos-fw-extra2 <optee_directory>/tee-pageable_v2.bin \
--tos-fw-cert build/stm32mp1/release/tos_fw_content.crt \
--tos-fw-key-cert build/stm32mp1/release/tos_fw_key.crt \
--nt-fw <u-boot_directory>/u-boot-nodtb.bin \
--nt-fw-cert build/stm32mp1/release/nt_fw_content.crt \
--nt-fw-key-cert build/stm32mp1/release/nt_fw_key.crt \
--hw-config <u-boot_directory>/u-boot.dtb \
--fw-config build/stm32mp1/release/fdts/fw-config.dtb \
--stm32mp-cfg-cert build/stm32mp1/release/stm32mp_cfg_cert.crt
tools/fiptool/fiptool create --tos-fw <optee_directory>/tee-header_v2.bin \
--tos-fw-extra1 <optee_directory>/tee-pager_v2.bin \
--tos-fw-extra2 <optee_directory>/tee-pageable_v2.bin \
--nt-fw <u-boot_directory>/u-boot-nodtb.bin \
--hw-config <u-boot_directory>/u-boot.dtb \
--fw-config build/stm32mp1/release/fdts/fw-config.dtb \
--trusted-key-cert build/stm32mp1/release/trusted_key.crt \
--tos-fw-cert build/stm32mp1/release/tos_fw_content.crt \
--tos-fw-key-cert build/stm32mp1/release/tos_fw_key.crt \
--nt-fw-cert build/stm32mp1/release/nt_fw_content.crt \
--nt-fw-key-cert build/stm32mp1/release/nt_fw_key.crt \
--stm32mp-cfg-cert build/stm32mp1/release/stm32mp_cfg_cert.crt \
build/stm32mp1/release/stm32mp1.fip
.. _STM32MP1 Series: https://www.st.com/en/microcontrollers-microprocessors/stm32mp1-series.html
.. _STM32MP1 part number codification: https://wiki.st.com/stm32mpu/wiki/STM32MP15_microprocessor#Part_number_codification
*Copyright (c) 2023, STMicroelectronics - All Rights Reserved*