blob: f4ce1981796a6db87260bb45655707db41f1d941 [file] [log] [blame]
/*
* Copyright (c) 2015-2018, Renesas Electronics Corporation. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
/**
* @file emmc_std.h
* @brief eMMC boot is expecting this header file
*
*/
#ifndef __EMMC_STD_H__
#define __EMMC_STD_H__
#include "emmc_hal.h"
/* ************************ HEADER (INCLUDE) SECTION *********************** */
/* ***************** MACROS, CONSTANTS, COMPILATION FLAGS ****************** */
#ifndef FALSE
#define FALSE 0U
#endif
#ifndef TRUE
#define TRUE 1U
#endif
/** @brief 64bit registers
**/
#define SETR_64(r, v) (*(volatile uint64_t *)(r) = (v))
#define GETR_64(r) (*(volatile uint64_t *)(r))
/** @brief 32bit registers
**/
#define SETR_32(r, v) (*(volatile uint32_t *)(r) = (v))
#define GETR_32(r) (*(volatile uint32_t *)(r))
/** @brief 16bit registers
*/
#define SETR_16(r, v) (*(volatile uint16_t *)(r) = (v))
#define GETR_16(r) (*(volatile uint16_t *)(r))
/** @brief 8bit registers
*/
#define SETR_8(r, v) (*(volatile uint8_t *)(r) = (v))
#define GETR_8(r) (*(volatile uint8_t *)(r))
/** @brief CSD register Macros
*/
#define EMMC_GET_CID(x, y) (emmc_bit_field(mmc_drv_obj.cid_data, (x), (y)))
#define EMMC_CID_MID() (EMMC_GET_CID(127, 120))
#define EMMC_CID_CBX() (EMMC_GET_CID(113, 112))
#define EMMC_CID_OID() (EMMC_GET_CID(111, 104))
#define EMMC_CID_PNM1() (EMMC_GET_CID(103, 88))
#define EMMC_CID_PNM2() (EMMC_GET_CID(87, 56))
#define EMMC_CID_PRV() (EMMC_GET_CID(55, 48))
#define EMMC_CID_PSN() (EMMC_GET_CID(47, 16))
#define EMMC_CID_MDT() (EMMC_GET_CID(15, 8))
#define EMMC_CID_CRC() (EMMC_GET_CID(7, 1))
/** @brief CSD register Macros
*/
#define EMMC_GET_CSD(x, y) (emmc_bit_field(mmc_drv_obj.csd_data, (x), (y)))
#define EMMC_CSD_CSD_STRUCTURE() (EMMC_GET_CSD(127, 126))
#define EMMC_CSD_SPEC_VARS() (EMMC_GET_CSD(125, 122))
#define EMMC_CSD_TAAC() (EMMC_GET_CSD(119, 112))
#define EMMC_CSD_NSAC() (EMMC_GET_CSD(111, 104))
#define EMMC_CSD_TRAN_SPEED() (EMMC_GET_CSD(103, 96))
#define EMMC_CSD_CCC() (EMMC_GET_CSD(95, 84))
#define EMMC_CSD_READ_BL_LEN() (EMMC_GET_CSD(83, 80))
#define EMMC_CSD_READ_BL_PARTIAL() (EMMC_GET_CSD(79, 79))
#define EMMC_CSD_WRITE_BLK_MISALIGN() (EMMC_GET_CSD(78, 78))
#define EMMC_CSD_READ_BLK_MISALIGN() (EMMC_GET_CSD(77, 77))
#define EMMC_CSD_DSR_IMP() (EMMC_GET_CSD(76, 76))
#define EMMC_CSD_C_SIZE() (EMMC_GET_CSD(73, 62))
#define EMMC_CSD_VDD_R_CURR_MIN() (EMMC_GET_CSD(61, 59))
#define EMMC_CSD_VDD_R_CURR_MAX() (EMMC_GET_CSD(58, 56))
#define EMMC_CSD_VDD_W_CURR_MIN() (EMMC_GET_CSD(55, 53))
#define EMMC_CSD_VDD_W_CURR_MAX() (EMMC_GET_CSD(52, 50))
#define EMMC_CSD_C_SIZE_MULT() (EMMC_GET_CSD(49, 47))
#define EMMC_CSD_ERASE_GRP_SIZE() (EMMC_GET_CSD(46, 42))
#define EMMC_CSD_ERASE_GRP_MULT() (EMMC_GET_CSD(41, 37))
#define EMMC_CSD_WP_GRP_SIZE() (EMMC_GET_CSD(36, 32))
#define EMMC_CSD_WP_GRP_ENABLE() (EMMC_GET_CSD(31, 31))
#define EMMC_CSD_DEFALT_ECC() (EMMC_GET_CSD(30, 29))
#define EMMC_CSD_R2W_FACTOR() (EMMC_GET_CSD(28, 26))
#define EMMC_CSD_WRITE_BL_LEN() (EMMC_GET_CSD(25, 22))
#define EMMC_CSD_WRITE_BL_PARTIAL() (EMMC_GET_CSD(21, 21))
#define EMMC_CSD_CONTENT_PROT_APP() (EMMC_GET_CSD(16, 16))
#define EMMC_CSD_FILE_FORMAT_GRP() (EMMC_GET_CSD(15, 15))
#define EMMC_CSD_COPY() (EMMC_GET_CSD(14, 14))
#define EMMC_CSD_PERM_WRITE_PROTECT() (EMMC_GET_CSD(13, 13))
#define EMMC_CSD_TMP_WRITE_PROTECT() (EMMC_GET_CSD(12, 12))
#define EMMC_CSD_FILE_FORMAT() (EMMC_GET_CSD(11, 10))
#define EMMC_CSD_ECC() (EMMC_GET_CSD(9, 8))
#define EMMC_CSD_CRC() (EMMC_GET_CSD(7, 1))
/** @brief for sector access
*/
#define EMMC_4B_BOUNDARY_CHECK_MASK 0x00000003
#define EMMC_SECTOR_SIZE_SHIFT 9U /* 512 = 2^9 */
#define EMMC_SECTOR_SIZE 512
#define EMMC_BLOCK_LENGTH 512
#define EMMC_BLOCK_LENGTH_DW 128
#define EMMC_BUF_SIZE_SHIFT 3U /* 8byte = 2^3 */
/** @brief eMMC specification clock
*/
#define EMMC_CLOCK_SPEC_400K 400000UL /**< initialize clock 400KHz */
#define EMMC_CLOCK_SPEC_20M 20000000UL /**< normal speed 20MHz */
#define EMMC_CLOCK_SPEC_26M 26000000UL /**< high speed 26MHz */
#define EMMC_CLOCK_SPEC_52M 52000000UL /**< high speed 52MHz */
#define EMMC_CLOCK_SPEC_100M 100000000UL /**< high speed 100MHz */
/** @brief EMMC driver error code. (extended HAL_MEMCARD_RETURN)
*/
typedef enum {
EMMC_ERR = 0, /**< unknown error */
EMMC_SUCCESS, /**< OK */
EMMC_ERR_FROM_DMAC, /**< DMAC allocation error */
EMMC_ERR_FROM_DMAC_TRANSFER, /**< DMAC transfer error */
EMMC_ERR_CARD_STATUS_BIT, /**< card status error. Non-masked error bit was set in the card status */
EMMC_ERR_CMD_TIMEOUT, /**< command timeout error */
EMMC_ERR_DATA_TIMEOUT, /**< data timeout error */
EMMC_ERR_CMD_CRC, /**< command CRC error */
EMMC_ERR_DATA_CRC, /**< data CRC error */
EMMC_ERR_PARAM, /**< parameter error */
EMMC_ERR_RESPONSE, /**< response error */
EMMC_ERR_RESPONSE_BUSY, /**< response busy error */
EMMC_ERR_TRANSFER, /**< data transfer error */
EMMC_ERR_READ_SECTOR, /**< read sector error */
EMMC_ERR_WRITE_SECTOR, /**< write sector error */
EMMC_ERR_STATE, /**< state error */
EMMC_ERR_TIMEOUT, /**< timeout error */
EMMC_ERR_ILLEGAL_CARD, /**< illegal card */
EMMC_ERR_CARD_BUSY, /**< Busy state */
EMMC_ERR_CARD_STATE, /**< card state error */
EMMC_ERR_SET_TRACE, /**< trace information error */
EMMC_ERR_FROM_TIMER, /**< Timer error */
EMMC_ERR_FORCE_TERMINATE, /**< Force terminate */
EMMC_ERR_CARD_POWER, /**< card power fail */
EMMC_ERR_ERASE_SECTOR, /**< erase sector error */
EMMC_ERR_INFO2 /**< exec cmd error info2 */
} EMMC_ERROR_CODE;
/** @brief Function number */
#define EMMC_FUNCNO_NONE 0U
#define EMMC_FUNCNO_DRIVER_INIT 1U
#define EMMC_FUNCNO_CARD_POWER_ON 2U
#define EMMC_FUNCNO_MOUNT 3U
#define EMMC_FUNCNO_CARD_INIT 4U
#define EMMC_FUNCNO_HIGH_SPEED 5U
#define EMMC_FUNCNO_BUS_WIDTH 6U
#define EMMC_FUNCNO_MULTI_BOOT_SELECT_PARTITION 7U
#define EMMC_FUNCNO_MULTI_BOOT_READ_SECTOR 8U
#define EMMC_FUNCNO_TRANS_DATA_READ_SECTOR 9U
#define EMMC_FUNCNO_UBOOT_IMAGE_SELECT_PARTITION 10U
#define EMMC_FUNCNO_UBOOT_IMAGE_READ_SECTOR 11U
#define EMMC_FUNCNO_SET_CLOCK 12U
#define EMMC_FUNCNO_EXEC_CMD 13U
#define EMMC_FUNCNO_READ_SECTOR 14U
#define EMMC_FUNCNO_WRITE_SECTOR 15U
#define EMMC_FUNCNO_ERASE_SECTOR 16U
#define EMMC_FUNCNO_GET_PERTITION_ACCESS 17U
/** @brief Response
*/
/** R1 */
#define EMMC_R1_ERROR_MASK 0xFDBFE080U /* Type 'E' bit and bit14(must be 0). ignore bit22 */
#define EMMC_R1_ERROR_MASK_WITHOUT_CRC (0xFD3FE080U) /* Ignore bit23 (Not check CRC error) */
#define EMMC_R1_STATE_MASK 0x00001E00U /* [12:9] */
#define EMMC_R1_READY 0x00000100U /* bit8 */
#define EMMC_R1_STATE_SHIFT 9
/** R4 */
#define EMMC_R4_RCA_MASK 0xFFFF0000UL
#define EMMC_R4_STATUS 0x00008000UL
/** CSD */
#define EMMC_TRANSPEED_FREQ_UNIT_MASK 0x07 /* bit[2:0] */
#define EMMC_TRANSPEED_FREQ_UNIT_SHIFT 0
#define EMMC_TRANSPEED_MULT_MASK 0x78 /* bit[6:3] */
#define EMMC_TRANSPEED_MULT_SHIFT 3
/** OCR */
#define EMMC_HOST_OCR_VALUE 0x40FF8080
#define EMMC_OCR_STATUS_BIT 0x80000000L /* Card power up status bit */
#define EMMC_OCR_ACCESS_MODE_MASK 0x60000000L /* bit[30:29] */
#define EMMC_OCR_ACCESS_MODE_SECT 0x40000000L
#define EMMC_OCR_ACCESS_MODE_BYTE 0x00000000L
/** EXT_CSD */
#define EMMC_EXT_CSD_S_CMD_SET 504
#define EMMC_EXT_CSD_INI_TIMEOUT_AP 241
#define EMMC_EXT_CSD_PWR_CL_DDR_52_360 239
#define EMMC_EXT_CSD_PWR_CL_DDR_52_195 238
#define EMMC_EXT_CSD_MIN_PERF_DDR_W_8_52 235
#define EMMC_EXT_CSD_MIN_PERF_DDR_R_8_52 234
#define EMMC_EXT_CSD_TRIM_MULT 232
#define EMMC_EXT_CSD_SEC_FEATURE_SUPPORT 231
#define EMMC_EXT_CSD_SEC_ERASE_MULT 229
#define EMMC_EXT_CSD_BOOT_INFO 228
#define EMMC_EXT_CSD_BOOT_SIZE_MULTI 226
#define EMMC_EXT_CSD_ACC_SIZE 225
#define EMMC_EXT_CSD_HC_ERASE_GRP_SIZE 224
#define EMMC_EXT_CSD_ERASE_TIMEOUT_MULT 223
#define EMMC_EXT_CSD_PEL_WR_SEC_C 222
#define EMMC_EXT_CSD_HC_WP_GRP_SIZE 221
#define EMMC_EXT_CSD_S_C_VCC 220
#define EMMC_EXT_CSD_S_C_VCCQ 219
#define EMMC_EXT_CSD_S_A_TIMEOUT 217
#define EMMC_EXT_CSD_SEC_COUNT 215
#define EMMC_EXT_CSD_MIN_PERF_W_8_52 210
#define EMMC_EXT_CSD_MIN_PERF_R_8_52 209
#define EMMC_EXT_CSD_MIN_PERF_W_8_26_4_52 208
#define EMMC_EXT_CSD_MIN_PERF_R_8_26_4_52 207
#define EMMC_EXT_CSD_MIN_PERF_W_4_26 206
#define EMMC_EXT_CSD_MIN_PERF_R_4_26 205
#define EMMC_EXT_CSD_PWR_CL_26_360 203
#define EMMC_EXT_CSD_PWR_CL_52_360 202
#define EMMC_EXT_CSD_PWR_CL_26_195 201
#define EMMC_EXT_CSD_PWR_CL_52_195 200
#define EMMC_EXT_CSD_CARD_TYPE 196
#define EMMC_EXT_CSD_CSD_STRUCTURE 194
#define EMMC_EXT_CSD_EXT_CSD_REV 192
#define EMMC_EXT_CSD_CMD_SET 191
#define EMMC_EXT_CSD_CMD_SET_REV 189
#define EMMC_EXT_CSD_POWER_CLASS 187
#define EMMC_EXT_CSD_HS_TIMING 185
#define EMMC_EXT_CSD_BUS_WIDTH 183
#define EMMC_EXT_CSD_ERASED_MEM_CONT 181
#define EMMC_EXT_CSD_PARTITION_CONFIG 179
#define EMMC_EXT_CSD_BOOT_CONFIG_PROT 178
#define EMMC_EXT_CSD_BOOT_BUS_WIDTH 177
#define EMMC_EXT_CSD_ERASE_GROUP_DEF 175
#define EMMC_EXT_CSD_BOOT_WP 173
#define EMMC_EXT_CSD_USER_WP 171
#define EMMC_EXT_CSD_FW_CONFIG 169
#define EMMC_EXT_CSD_RPMB_SIZE_MULT 168
#define EMMC_EXT_CSD_RST_n_FUNCTION 162
#define EMMC_EXT_CSD_PARTITIONING_SUPPORT 160
#define EMMC_EXT_CSD_MAX_ENH_SIZE_MULT 159
#define EMMC_EXT_CSD_PARTITIONS_ATTRIBUTE 156
#define EMMC_EXT_CSD_PARTITION_SETTING_COMPLETED 155
#define EMMC_EXT_CSD_GP_SIZE_MULT 154
#define EMMC_EXT_CSD_ENH_SIZE_MULT 142
#define EMMC_EXT_CSD_ENH_START_ADDR 139
#define EMMC_EXT_CSD_SEC_BAD_BLK_MGMNT 134
#define EMMC_EXT_CSD_CARD_TYPE_26MHZ 0x01
#define EMMC_EXT_CSD_CARD_TYPE_52MHZ 0x02
#define EMMC_EXT_CSD_CARD_TYPE_DDR_52MHZ_12V 0x04
#define EMMC_EXT_CSD_CARD_TYPE_DDR_52MHZ_18V 0x08
#define EMMC_EXT_CSD_CARD_TYPE_52MHZ_MASK 0x0e
/** SWITCH (CMD6) argument */
#define EXTCSD_ACCESS_BYTE (BIT25|BIT24)
#define EXTCSD_SET_BITS BIT24
#define HS_TIMING_ADD (185<<16) /* H'b9 */
#define HS_TIMING_1 (1<<8)
#define HS_TIMING_HS200 (2<<8)
#define HS_TIMING_HS400 (3<<8)
#define BUS_WIDTH_ADD (183<<16) /* H'b7 */
#define BUS_WIDTH_1 (0<<8)
#define BUS_WIDTH_4 (1<<8)
#define BUS_WIDTH_8 (2<<8)
#define BUS_WIDTH_4DDR (5<<8)
#define BUS_WIDTH_8DDR (6<<8)
#define EMMC_SWITCH_HS_TIMING (EXTCSD_ACCESS_BYTE|HS_TIMING_ADD|HS_TIMING_1) /**< H'03b90100 */
#define EMMC_SWITCH_HS_TIMING_OFF (EXTCSD_ACCESS_BYTE|HS_TIMING_ADD) /**< H'03b90000 */
#define EMMC_SWITCH_BUS_WIDTH_1 (EXTCSD_ACCESS_BYTE|BUS_WIDTH_ADD|BUS_WIDTH_1) /**< H'03b70000 */
#define EMMC_SWITCH_BUS_WIDTH_4 (EXTCSD_ACCESS_BYTE|BUS_WIDTH_ADD|BUS_WIDTH_4) /**< H'03b70100 */
#define EMMC_SWITCH_BUS_WIDTH_8 (EXTCSD_ACCESS_BYTE|BUS_WIDTH_ADD|BUS_WIDTH_8) /**< H'03b70200 */
#define EMMC_SWITCH_BUS_WIDTH_4DDR (EXTCSD_ACCESS_BYTE|BUS_WIDTH_ADD|BUS_WIDTH_4DDR) /**< H'03b70500 */
#define EMMC_SWITCH_BUS_WIDTH_8DDR (EXTCSD_ACCESS_BYTE|BUS_WIDTH_ADD|BUS_WIDTH_8DDR) /**< H'03b70600 */
#define EMMC_SWITCH_PARTITION_CONFIG 0x03B30000UL /**< Partition config = 0x00 */
#define TIMING_HIGH_SPEED 1UL
#define EMMC_BOOT_PARTITION_EN_MASK 0x38U
#define EMMC_BOOT_PARTITION_EN_SHIFT 3U
/** Bus width */
#define EMMC_BUSWIDTH_1BIT CE_CMD_SET_DATW_1BIT
#define EMMC_BUSWIDTH_4BIT CE_CMD_SET_DATW_4BIT
#define EMMC_BUSWIDTH_8BIT CE_CMD_SET_DATW_8BIT
/** for st_mmc_base */
#define EMMC_MAX_RESPONSE_LENGTH 17
#define EMMC_MAX_CID_LENGTH 16
#define EMMC_MAX_CSD_LENGTH 16
#define EMMC_MAX_EXT_CSD_LENGTH 512U
#define EMMC_RES_REG_ALIGNED 4U
#define EMMC_BUF_REG_ALIGNED 8U
/** @brief for TAAC mask
*/
#define TAAC_TIME_UNIT_MASK (0x07)
#define TAAC_MULTIPLIER_FACTOR_MASK (0x0F)
/* ********************** STRUCTURES, TYPE DEFINITIONS ********************* */
/** @brief Partition id
*/
typedef enum {
PARTITION_ID_USER = 0x0, /**< User Area */
PARTITION_ID_BOOT_1 = 0x1, /**< boot partition 1 */
PARTITION_ID_BOOT_2 = 0x2, /**< boot partition 2 */
PARTITION_ID_RPMB = 0x3, /**< Replay Protected Memory Block */
PARTITION_ID_GP_1 = 0x4, /**< General Purpose partition 1 */
PARTITION_ID_GP_2 = 0x5, /**< General Purpose partition 2 */
PARTITION_ID_GP_3 = 0x6, /**< General Purpose partition 3 */
PARTITION_ID_GP_4 = 0x7, /**< General Purpose partition 4 */
PARTITION_ID_MASK = 0x7 /**< [2:0] */
} EMMC_PARTITION_ID;
/** @brief card state in R1 response [12:9]
*/
typedef enum {
EMMC_R1_STATE_IDLE = 0,
EMMC_R1_STATE_READY,
EMMC_R1_STATE_IDENT,
EMMC_R1_STATE_STBY,
EMMC_R1_STATE_TRAN,
EMMC_R1_STATE_DATA,
EMMC_R1_STATE_RCV,
EMMC_R1_STATE_PRG,
EMMC_R1_STATE_DIS,
EMMC_R1_STATE_BTST,
EMMC_R1_STATE_SLEP
} EMMC_R1_STATE;
typedef enum {
ESTATE_BEGIN = 0,
ESTATE_ISSUE_CMD,
ESTATE_NON_RESP_CMD,
ESTATE_RCV_RESP,
ESTATE_RCV_RESPONSE_BUSY,
ESTATE_CHECK_RESPONSE_COMPLETE,
ESTATE_DATA_TRANSFER,
ESTATE_DATA_TRANSFER_COMPLETE,
ESTATE_ACCESS_END,
ESTATE_TRANSFER_ERROR,
ESTATE_ERROR,
ESTATE_END
} EMMC_INT_STATE;
/** @brief eMMC boot driver error information
*/
typedef struct {
uint16_t num; /**< error no */
uint16_t code; /**< error code */
volatile uint32_t info1; /**< SD_INFO1 register value. (hardware dependence) */
volatile uint32_t info2; /**< SD_INFO2 register value. (hardware dependence) */
volatile uint32_t status1;/**< SD_ERR_STS1 register value. (hardware dependence) */
volatile uint32_t status2;/**< SD_ERR_STS2 register value. (hardware dependence) */
volatile uint32_t dm_info1;/**< DM_CM_INFO1 register value. (hardware dependence) */
volatile uint32_t dm_info2;/**< DM_CM_INFO2 register value. (hardware dependence) */
} st_error_info;
/** @brief Command information
*/
typedef struct {
HAL_MEMCARD_COMMAND cmd; /**< Command information */
uint32_t arg; /**< argument */
HAL_MEMCARD_OPERATION dir; /**< direction */
uint32_t hw; /**< H/W dependence. SD_CMD register value. */
} st_command_info;
/** @brief MMC driver base
*/
typedef struct {
st_error_info error_info; /**< error information */
st_command_info cmd_info; /**< command information */
/* for data transfer */
uint32_t *buff_address_virtual; /**< Dest or Src buff */
uint32_t *buff_address_physical; /**< Dest or Src buff */
HAL_MEMCARD_DATA_WIDTH bus_width;
/**< bus width */
uint32_t trans_size; /**< transfer size for this command */
uint32_t remain_size; /**< remain size for this command */
uint32_t response_length; /**< response length for this command */
uint32_t sector_size; /**< sector_size */
/* clock */
uint32_t base_clock; /**< MMC host controller clock */
uint32_t max_freq; /**< Max frequency (Card Spec)[Hz]. It changes dynamically by CSD and EXT_CSD. */
uint32_t request_freq; /**< request freq [Hz] (400K, 26MHz, 52MHz, etc) */
uint32_t current_freq; /**< current MMC clock[Hz] (the closest frequency supported by HW) */
/* state flag */
HAL_MEMCARD_PRESENCE_STATUS card_present;
/**< presence status of the memory card */
uint32_t card_power_enable; /**< True : Power ON */
uint32_t clock_enable; /**< True : Clock ON */
uint32_t initialize; /**< True : initialize complete. */
uint32_t access_mode; /**< True : sector access, FALSE : byte access */
uint32_t mount; /**< True : mount complete. */
uint32_t selected; /**< True : selected card. */
HAL_MEMCARD_DATA_TRANSFER_MODE transfer_mode;
/**< 0: DMA, 1:PIO */
uint32_t image_num; /**< loaded ISSW image No. ISSW have copy image. */
EMMC_R1_STATE current_state; /**< card state */
volatile uint32_t during_cmd_processing; /**< True : during command processing */
volatile uint32_t during_transfer; /**< True : during transfer */
volatile uint32_t during_dma_transfer; /**< True : during transfer (DMA)*/
volatile uint32_t dma_error_flag; /**< True : occurred DMAC error */
volatile uint32_t force_terminate; /**< force terminate flag */
volatile uint32_t state_machine_blocking; /**< state machine blocking flag : True or False */
volatile uint32_t get_partition_access_flag;
/**< True : get partition access processing */
EMMC_PARTITION_ID boot_partition_en; /**< Boot partition */
EMMC_PARTITION_ID partition_access; /**< Current access partition */
/* timeout */
uint32_t hs_timing; /**< high speed */
/* timeout */
uint32_t data_timeout; /**< read and write data timeout.*/
/* retry */
uint32_t retries_after_fail; /**< how many times to try after fail, for instance sending command */
/* interrupt */
volatile uint32_t int_event1; /**< interrupt SD_INFO1 Event */
volatile uint32_t int_event2; /**< interrupt SD_INFO2 Event */
volatile uint32_t dm_event1; /**< interrupt DM_CM_INFO1 Event */
volatile uint32_t dm_event2; /**< interrupt DM_CM_INFO2 Event */
/* response */
uint32_t *response; /**< pointer to buffer for executing command. */
uint32_t r1_card_status; /**< R1 response data */
uint32_t r3_ocr; /**< R3 response data */
uint32_t r4_resp; /**< R4 response data */
uint32_t r5_resp; /**< R5 response data */
uint32_t low_clock_mode_enable;
/**< True : clock mode is low. (MMC clock = Max26MHz) */
uint32_t reserved2;
uint32_t reserved3;
uint32_t reserved4;
/* CSD registers (4byte align) */
uint8_t csd_data[EMMC_MAX_CSD_LENGTH] /**< CSD */
__attribute__ ((aligned(EMMC_RES_REG_ALIGNED)));
/* CID registers (4byte align) */
uint8_t cid_data[EMMC_MAX_CID_LENGTH] /**< CID */
__attribute__ ((aligned(EMMC_RES_REG_ALIGNED)));
/* EXT CSD registers (8byte align) */
uint8_t ext_csd_data[EMMC_MAX_EXT_CSD_LENGTH] /**< EXT_CSD */
__attribute__ ((aligned(EMMC_BUF_REG_ALIGNED)));
/* Response registers (4byte align) */
uint8_t response_data[EMMC_MAX_RESPONSE_LENGTH] /**< other response */
__attribute__ ((aligned(EMMC_RES_REG_ALIGNED)));
} st_mmc_base;
typedef int (*func) (void);
/* ********************** DECLARATION OF EXTERNAL DATA ********************* */
/* ************************** FUNCTION PROTOTYPES ************************** */
uint32_t emmc_get_csd_time(void);
#define MMC_DEBUG
/* ********************************* CODE ********************************** */
/* ******************************** END ************************************ */
#endif /* __EMMC_STD_H__ */