blob: dc11e0a72f7c8d9b9578e96ca02100989fd23aa3 [file] [log] [blame]
/*
* Copyright (c) 2013-2015, ARM Limited and Contributors. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* Neither the name of ARM nor the names of its contributors may be used
* to endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <arch.h>
#include <asm_macros.S>
#include <context.h>
#include <interrupt_mgmt.h>
#include <platform_def.h>
#include <runtime_svc.h>
.globl runtime_exceptions
/* -----------------------------------------------------
* Handle SMC exceptions separately from other sync.
* exceptions.
* -----------------------------------------------------
*/
.macro handle_sync_exception
/* Enable the SError interrupt */
msr daifclr, #DAIF_ABT_BIT
str x30, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_LR]
mrs x30, esr_el3
ubfx x30, x30, #ESR_EC_SHIFT, #ESR_EC_LENGTH
cmp x30, #EC_AARCH32_SMC
b.eq smc_handler32
cmp x30, #EC_AARCH64_SMC
b.eq smc_handler64
/* -----------------------------------------------------
* The following code handles any synchronous exception
* that is not an SMC.
* -----------------------------------------------------
*/
bl report_unhandled_exception
.endm
/* -----------------------------------------------------
* This macro handles FIQ or IRQ interrupts i.e. EL3,
* S-EL1 and NS interrupts.
* -----------------------------------------------------
*/
.macro handle_interrupt_exception label
/* Enable the SError interrupt */
msr daifclr, #DAIF_ABT_BIT
str x30, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_LR]
bl save_gp_registers
/*
* Save the EL3 system registers needed to return from
* this exception.
*/
mrs x0, spsr_el3
mrs x1, elr_el3
stp x0, x1, [sp, #CTX_EL3STATE_OFFSET + CTX_SPSR_EL3]
/* Switch to the runtime stack i.e. SP_EL0 */
ldr x2, [sp, #CTX_EL3STATE_OFFSET + CTX_RUNTIME_SP]
mov x20, sp
msr spsel, #0
mov sp, x2
/*
* Find out whether this is a valid interrupt type. If the
* interrupt controller reports a spurious interrupt then
* return to where we came from.
*/
bl plat_ic_get_pending_interrupt_type
cmp x0, #INTR_TYPE_INVAL
b.eq interrupt_exit_\label
/*
* Get the registered handler for this interrupt type. A
* NULL return value could be 'cause of the following
* conditions:
*
* a. An interrupt of a type was routed correctly but a
* handler for its type was not registered.
*
* b. An interrupt of a type was not routed correctly so
* a handler for its type was not registered.
*
* c. An interrupt of a type was routed correctly to EL3,
* but was deasserted before its pending state could
* be read. Another interrupt of a different type pended
* at the same time and its type was reported as pending
* instead. However, a handler for this type was not
* registered.
*
* a. and b. can only happen due to a programming error.
* The occurrence of c. could be beyond the control of
* Trusted Firmware. It makes sense to return from this
* exception instead of reporting an error.
*/
bl get_interrupt_type_handler
cbz x0, interrupt_exit_\label
mov x21, x0
mov x0, #INTR_ID_UNAVAILABLE
/* Set the current security state in the 'flags' parameter */
mrs x2, scr_el3
ubfx x1, x2, #0, #1
/* Restore the reference to the 'handle' i.e. SP_EL3 */
mov x2, x20
/* x3 will point to a cookie (not used now) */
mov x3, xzr
/* Call the interrupt type handler */
blr x21
interrupt_exit_\label:
/* Return from exception, possibly in a different security state */
b el3_exit
.endm
.macro save_x18_to_x29_sp_el0
stp x18, x19, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X18]
stp x20, x21, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X20]
stp x22, x23, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X22]
stp x24, x25, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X24]
stp x26, x27, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X26]
stp x28, x29, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X28]
mrs x18, sp_el0
str x18, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_SP_EL0]
.endm
.section .vectors, "ax"; .align 11
.align 7
runtime_exceptions:
/* -----------------------------------------------------
* Current EL with _sp_el0 : 0x0 - 0x200
* -----------------------------------------------------
*/
sync_exception_sp_el0:
/* -----------------------------------------------------
* We don't expect any synchronous exceptions from EL3
* -----------------------------------------------------
*/
bl report_unhandled_exception
check_vector_size sync_exception_sp_el0
.align 7
/* -----------------------------------------------------
* EL3 code is non-reentrant. Any asynchronous exception
* is a serious error. Loop infinitely.
* -----------------------------------------------------
*/
irq_sp_el0:
bl report_unhandled_interrupt
check_vector_size irq_sp_el0
.align 7
fiq_sp_el0:
bl report_unhandled_interrupt
check_vector_size fiq_sp_el0
.align 7
serror_sp_el0:
bl report_unhandled_exception
check_vector_size serror_sp_el0
/* -----------------------------------------------------
* Current EL with SPx: 0x200 - 0x400
* -----------------------------------------------------
*/
.align 7
sync_exception_sp_elx:
/* -----------------------------------------------------
* This exception will trigger if anything went wrong
* during a previous exception entry or exit or while
* handling an earlier unexpected synchronous exception.
* There is a high probability that SP_EL3 is corrupted.
* -----------------------------------------------------
*/
bl report_unhandled_exception
check_vector_size sync_exception_sp_elx
.align 7
irq_sp_elx:
bl report_unhandled_interrupt
check_vector_size irq_sp_elx
.align 7
fiq_sp_elx:
bl report_unhandled_interrupt
check_vector_size fiq_sp_elx
.align 7
serror_sp_elx:
bl report_unhandled_exception
check_vector_size serror_sp_elx
/* -----------------------------------------------------
* Lower EL using AArch64 : 0x400 - 0x600
* -----------------------------------------------------
*/
.align 7
sync_exception_aarch64:
/* -----------------------------------------------------
* This exception vector will be the entry point for
* SMCs and traps that are unhandled at lower ELs most
* commonly. SP_EL3 should point to a valid cpu context
* where the general purpose and system register state
* can be saved.
* -----------------------------------------------------
*/
handle_sync_exception
check_vector_size sync_exception_aarch64
.align 7
/* -----------------------------------------------------
* Asynchronous exceptions from lower ELs are not
* currently supported. Report their occurrence.
* -----------------------------------------------------
*/
irq_aarch64:
handle_interrupt_exception irq_aarch64
check_vector_size irq_aarch64
.align 7
fiq_aarch64:
handle_interrupt_exception fiq_aarch64
check_vector_size fiq_aarch64
.align 7
serror_aarch64:
bl report_unhandled_exception
check_vector_size serror_aarch64
/* -----------------------------------------------------
* Lower EL using AArch32 : 0x600 - 0x800
* -----------------------------------------------------
*/
.align 7
sync_exception_aarch32:
/* -----------------------------------------------------
* This exception vector will be the entry point for
* SMCs and traps that are unhandled at lower ELs most
* commonly. SP_EL3 should point to a valid cpu context
* where the general purpose and system register state
* can be saved.
* -----------------------------------------------------
*/
handle_sync_exception
check_vector_size sync_exception_aarch32
.align 7
/* -----------------------------------------------------
* Asynchronous exceptions from lower ELs are not
* currently supported. Report their occurrence.
* -----------------------------------------------------
*/
irq_aarch32:
handle_interrupt_exception irq_aarch32
check_vector_size irq_aarch32
.align 7
fiq_aarch32:
handle_interrupt_exception fiq_aarch32
check_vector_size fiq_aarch32
.align 7
serror_aarch32:
bl report_unhandled_exception
check_vector_size serror_aarch32
.align 7
/* -----------------------------------------------------
* The following code handles secure monitor calls.
* Depending upon the execution state from where the SMC
* has been invoked, it frees some general purpose
* registers to perform the remaining tasks. They
* involve finding the runtime service handler that is
* the target of the SMC & switching to runtime stacks
* (SP_EL0) before calling the handler.
*
* Note that x30 has been explicitly saved and can be
* used here
* -----------------------------------------------------
*/
func smc_handler
smc_handler32:
/* Check whether aarch32 issued an SMC64 */
tbnz x0, #FUNCID_CC_SHIFT, smc_prohibited
/* -----------------------------------------------------
* Since we're are coming from aarch32, x8-x18 need to
* be saved as per SMC32 calling convention. If a lower
* EL in aarch64 is making an SMC32 call then it must
* have saved x8-x17 already therein.
* -----------------------------------------------------
*/
stp x8, x9, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X8]
stp x10, x11, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X10]
stp x12, x13, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X12]
stp x14, x15, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X14]
stp x16, x17, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X16]
/* x4-x7, x18, sp_el0 are saved below */
smc_handler64:
/* -----------------------------------------------------
* Populate the parameters for the SMC handler. We
* already have x0-x4 in place. x5 will point to a
* cookie (not used now). x6 will point to the context
* structure (SP_EL3) and x7 will contain flags we need
* to pass to the handler Hence save x5-x7. Note that x4
* only needs to be preserved for AArch32 callers but we
* do it for AArch64 callers as well for convenience
* -----------------------------------------------------
*/
stp x4, x5, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X4]
stp x6, x7, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X6]
/* Save rest of the gpregs and sp_el0*/
save_x18_to_x29_sp_el0
mov x5, xzr
mov x6, sp
/* Get the unique owning entity number */
ubfx x16, x0, #FUNCID_OEN_SHIFT, #FUNCID_OEN_WIDTH
ubfx x15, x0, #FUNCID_TYPE_SHIFT, #FUNCID_TYPE_WIDTH
orr x16, x16, x15, lsl #FUNCID_OEN_WIDTH
adr x11, (__RT_SVC_DESCS_START__ + RT_SVC_DESC_HANDLE)
/* Load descriptor index from array of indices */
adr x14, rt_svc_descs_indices
ldrb w15, [x14, x16]
/* -----------------------------------------------------
* Restore the saved C runtime stack value which will
* become the new SP_EL0 i.e. EL3 runtime stack. It was
* saved in the 'cpu_context' structure prior to the last
* ERET from EL3.
* -----------------------------------------------------
*/
ldr x12, [x6, #CTX_EL3STATE_OFFSET + CTX_RUNTIME_SP]
/*
* Any index greater than 127 is invalid. Check bit 7 for
* a valid index
*/
tbnz w15, 7, smc_unknown
/* Switch to SP_EL0 */
msr spsel, #0
/* -----------------------------------------------------
* Get the descriptor using the index
* x11 = (base + off), x15 = index
*
* handler = (base + off) + (index << log2(size))
* -----------------------------------------------------
*/
lsl w10, w15, #RT_SVC_SIZE_LOG2
ldr x15, [x11, w10, uxtw]
/* -----------------------------------------------------
* Save the SPSR_EL3, ELR_EL3, & SCR_EL3 in case there
* is a world switch during SMC handling.
* TODO: Revisit if all system registers can be saved
* later.
* -----------------------------------------------------
*/
mrs x16, spsr_el3
mrs x17, elr_el3
mrs x18, scr_el3
stp x16, x17, [x6, #CTX_EL3STATE_OFFSET + CTX_SPSR_EL3]
str x18, [x6, #CTX_EL3STATE_OFFSET + CTX_SCR_EL3]
/* Copy SCR_EL3.NS bit to the flag to indicate caller's security */
bfi x7, x18, #0, #1
mov sp, x12
/* -----------------------------------------------------
* Call the Secure Monitor Call handler and then drop
* directly into el3_exit() which will program any
* remaining architectural state prior to issuing the
* ERET to the desired lower EL.
* -----------------------------------------------------
*/
#if DEBUG
cbz x15, rt_svc_fw_critical_error
#endif
blr x15
b el3_exit
smc_unknown:
/*
* Here we restore x4-x18 regardless of where we came from. AArch32
* callers will find the registers contents unchanged, but AArch64
* callers will find the registers modified (with stale earlier NS
* content). Either way, we aren't leaking any secure information
* through them
*/
mov w0, #SMC_UNK
b restore_gp_registers_callee_eret
smc_prohibited:
ldr x30, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_LR]
mov w0, #SMC_UNK
eret
rt_svc_fw_critical_error:
msr spsel, #1 /* Switch to SP_ELx */
bl report_unhandled_exception
endfunc smc_handler