fdts/tc.dts - filogic/atf - Gitiles

 /*
  * Copyright (c) 2020-2021, Arm Limited. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */

 /dts-v1/;

 / {
 	compatible = "arm,tc";
 	interrupt-parent = <&gic>;
 	#address-cells = <2>;
 	#size-cells = <2>;

 	aliases {
 		serial0 = &soc_uart0;
 	};

 	chosen {
 		bootargs = "console=ttyAMA0 debug user_debug=31 earlycon=pl011,0x7ff80000 loglevel=9 androidboot.hardware=total_compute androidboot.boot_devices=1c050000.mmci ip=dhcp androidboot.selinux=permissive allow_mismatched_32bit_el0";
 		stdout-path = "serial0:115200n8";
 	};

 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;

 		cpu-map {
 			cluster0 {
 				core0 {
 					cpu = <&CPU0>;
 				};
 				core1 {
 					cpu = <&CPU1>;
 				};
 				core2 {
 					cpu = <&CPU2>;
 				};
 				core3 {
 					cpu = <&CPU3>;
 				};
 				core4 {
 					cpu = <&CPU4>;
 				};
 				core5 {
 					cpu = <&CPU5>;
 				};
 				core6 {
 					cpu = <&CPU6>;
 				};
 				core7 {
 					cpu = <&CPU7>;
 				};
 			};
 		};

 		/*
 		 * The timings below are just to demonstrate working cpuidle.
 		 * These values may be inaccurate.
 		 */
 		idle-states {
 			entry-method = "arm,psci";

 			CPU_SLEEP_0: cpu-sleep-0 {
 				compatible = "arm,idle-state";
 				arm,psci-suspend-param = <0x0010000>;
 				local-timer-stop;
 				entry-latency-us = <300>;
 				exit-latency-us = <1200>;
 				min-residency-us = <2000>;
 			};
 			CLUSTER_SLEEP_0: cluster-sleep-0 {
 				compatible = "arm,idle-state";
 				arm,psci-suspend-param = <0x1010000>;
 				local-timer-stop;
 				entry-latency-us = <400>;
 				exit-latency-us = <1200>;
 				min-residency-us = <2500>;
 			};
 		};

 		amus {
 			amu: amu-0 {
 				#address-cells = <1>;
 				#size-cells = <0>;

 				mpmm_gear0: counter@0 {
 					reg = <0>;

 					enable-at-el3;
 				};

 				mpmm_gear1: counter@1 {
 					reg = <1>;

 					enable-at-el3;
 				};

 				mpmm_gear2: counter@2 {
 					reg = <2>;

 					enable-at-el3;
 				};
 			};
 		};

 		CPU0:cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
 			reg = <0x0>;
 			enable-method = "psci";
 			clocks = <&scmi_dvfs 0>;
 			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 			capacity-dmips-mhz = <406>;
 			amu = <&amu>;
 			supports-mpmm;
 		};

 		CPU1:cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
 			reg = <0x100>;
 			enable-method = "psci";
 			clocks = <&scmi_dvfs 0>;
 			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 			capacity-dmips-mhz = <406>;
 			amu = <&amu>;
 			supports-mpmm;
 		};

 		CPU2:cpu@200 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
 			reg = <0x200>;
 			enable-method = "psci";
 			clocks = <&scmi_dvfs 0>;
 			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 			capacity-dmips-mhz = <406>;
 			amu = <&amu>;
 			supports-mpmm;
 		};

 		CPU3:cpu@300 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
 			reg = <0x300>;
 			enable-method = "psci";
 			clocks = <&scmi_dvfs 0>;
 			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 			capacity-dmips-mhz = <406>;
 			amu = <&amu>;
 			supports-mpmm;
 		};

 		CPU4:cpu@400 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
 			reg = <0x400>;
 			enable-method = "psci";
 			clocks = <&scmi_dvfs 1>;
 			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 			capacity-dmips-mhz = <912>;
 			amu = <&amu>;
 			supports-mpmm;
 		};

 		CPU5:cpu@500 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
 			reg = <0x500>;
 			enable-method = "psci";
 			clocks = <&scmi_dvfs 1>;
 			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 			capacity-dmips-mhz = <912>;
 			amu = <&amu>;
 			supports-mpmm;
 		};

 		CPU6:cpu@600 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
 			reg = <0x600>;
 			enable-method = "psci";
 			clocks = <&scmi_dvfs 1>;
 			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 			capacity-dmips-mhz = <912>;
 			amu = <&amu>;
 			supports-mpmm;
 		};

 		CPU7:cpu@700 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
 			reg = <0x700>;
 			enable-method = "psci";
 			clocks = <&scmi_dvfs 2>;
 			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 			capacity-dmips-mhz = <1024>;
 			amu = <&amu>;
 			supports-mpmm;
 		};

 	};

 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;

 		optee@0xfce00000 {
 			reg = <0x00000000 0xfce00000 0 0x00200000>;
 			no-map;
 		};
 	};

 	psci {
 		compatible = "arm,psci-1.0", "arm,psci-0.2";
 		method = "smc";
 	};

 	sram: sram@6000000 {
 		compatible = "mmio-sram";
 		reg = <0x0 0x06000000 0x0 0x8000>;

 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x0 0x06000000 0x8000>;

 		cpu_scp_scmi_mem: scp-shmem@0 {
 			compatible = "arm,scmi-shmem";
 			reg = <0x0 0x80>;
 		};
 	};

 	mbox_db_rx: mhu@45010000 {
 		compatible = "arm,mhuv2-rx","arm,primecell";
 		reg = <0x0 0x45010000 0x0 0x1000>;
 		clocks = <&soc_refclk100mhz>;
 		clock-names = "apb_pclk";
 		#mbox-cells = <2>;
 		interrupts = <0 317 4>;
 		interrupt-names = "mhu_rx";
 		mhu-protocol = "doorbell";
 		arm,mhuv2-protocols = <0 1>;
 	};

 	mbox_db_tx: mhu@45000000 {
 		compatible = "arm,mhuv2-tx","arm,primecell";
 		reg = <0x0 0x45000000 0x0 0x1000>;
 		clocks = <&soc_refclk100mhz>;
 		clock-names = "apb_pclk";
 		#mbox-cells = <2>;
 		interrupt-names = "mhu_tx";
 		mhu-protocol = "doorbell";
 		arm,mhuv2-protocols = <0 1>;
 	};

 	scmi {
 		compatible = "arm,scmi";
 		mbox-names = "tx", "rx";
 		mboxes = <&mbox_db_tx 0 0 &mbox_db_rx 0 0 >;
 		shmem = <&cpu_scp_scmi_mem &cpu_scp_scmi_mem>;
 		#address-cells = <1>;
 		#size-cells = <0>;

 		scmi_dvfs: protocol@13 {
 			reg = <0x13>;
 			#clock-cells = <1>;
 		};

 		scmi_clk: protocol@14 {
 			reg = <0x14>;
 			#clock-cells = <1>;
 		};
 	};

 	gic: interrupt-controller@2c010000 {
 		compatible = "arm,gic-600", "arm,gic-v3";
 		#address-cells = <2>;
 		#interrupt-cells = <3>;
 		#size-cells = <2>;
 		ranges;
 		interrupt-controller;
 		reg = <0x0 0x30000000 0 0x10000>, /* GICD */
 		      <0x0 0x30080000 0 0x200000>; /* GICR */
 		interrupts = <0x1 0x9 0x4>;
 	};

 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <0x1 13 0x8>,
 			     <0x1 14 0x8>,
 			     <0x1 11 0x8>,
 			     <0x1 10 0x8>;
 	};

 	soc_refclk100mhz: refclk100mhz {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <100000000>;
 		clock-output-names = "apb_pclk";
 	};

 	soc_refclk60mhz: refclk60mhz {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <60000000>;
 		clock-output-names = "iofpga_clk";
 	};

 	soc_uartclk:  uartclk {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
 		clock-output-names = "uartclk";
 	};

 	soc_uart0: uart@7ff80000 {
 		compatible = "arm,pl011", "arm,primecell";
 		reg = <0x0 0x7ff80000 0x0 0x1000>;
 		interrupts = <0x0 116 0x4>;
 		clocks = <&soc_uartclk>, <&soc_refclk100mhz>;
 		clock-names = "uartclk", "apb_pclk";
 		status = "okay";
 	};

 	vencoder {
 		compatible = "drm,virtual-encoder";

 		port {
 			vencoder_in: endpoint {
 				remote-endpoint = <&dp_pl0_out0>;
 			};
 		};

 		display-timings {
 			panel-timing {
 				clock-frequency = <25175000>;
 				hactive = <640>;
 				vactive = <480>;
 				hfront-porch = <16>;
 				hback-porch = <48>;
 				hsync-len = <96>;
 				vfront-porch = <10>;
 				vback-porch = <33>;
 				vsync-len = <2>;
 			};
 		};

 	};

 	hdlcd: hdlcd@7ff60000 {
 		compatible = "arm,hdlcd";
 		reg = <0x0 0x7ff60000 0x0 0x1000>;
 		interrupts = <0x0 117 0x4>;
 		clocks = <&fake_hdlcd_clk>;
 		clock-names = "pxlclk";
 		status = "disabled";

 		port {
 			hdlcd_out: endpoint {
 				remote-endpoint = <&vencoder_in>;
 			};
 		};
 	};

 	fake_hdlcd_clk: fake-hdlcd-clk {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <25175000>;
 		clock-output-names = "pxlclk";
 	};

 	ethernet@18000000 {
 		compatible = "smsc,lan91c111";
 		reg = <0x0 0x18000000 0x0 0x10000>;
 		interrupts = <0 109 4>;
 	};

 	kmi@1c060000 {
 		compatible = "arm,pl050", "arm,primecell";
 		reg = <0x0 0x001c060000 0x0 0x1000>;
 		interrupts = <0 197 4>;
 		clocks = <&bp_clock24mhz>, <&bp_clock24mhz>;
 		clock-names = "KMIREFCLK", "apb_pclk";
 	};

 	kmi@1c070000 {
 		compatible = "arm,pl050", "arm,primecell";
 		reg = <0x0 0x001c070000 0x0 0x1000>;
 		interrupts = <0 103 4>;
 		clocks = <&bp_clock24mhz>, <&bp_clock24mhz>;
 		clock-names = "KMIREFCLK", "apb_pclk";
 	};

 	bp_clock24mhz: clock24mhz {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <24000000>;
 		clock-output-names = "bp:clock24mhz";
 	};

 	virtio_block@1c130000 {
 		compatible = "virtio,mmio";
 		reg = <0x0 0x1c130000 0x0 0x200>;
 		interrupts = <0 204 4>;
 	};

 	sysreg: sysreg@1c010000 {
 		compatible = "arm,vexpress-sysreg";
 		reg = <0x0 0x001c010000 0x0 0x1000>;
 		gpio-controller;
 		#gpio-cells = <2>;
 	};

 	fixed_3v3: v2m-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
 	};

 	mmci@1c050000 {
 		compatible = "arm,pl180", "arm,primecell";
 		reg = <0x0 0x001c050000 0x0 0x1000>;
 		interrupts = <0 107 0x4>,
 			     <0 108 0x4>;
 		cd-gpios = <&sysreg 0 0>;
 		wp-gpios = <&sysreg 1 0>;
 		bus-width = <8>;
 		max-frequency = <12000000>;
 		vmmc-supply = <&fixed_3v3>;
 		clocks = <&bp_clock24mhz>, <&bp_clock24mhz>;
 		clock-names = "mclk", "apb_pclk";
 	};

 	dp0: display@2cc00000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "arm,mali-d71";
 		reg = <0 0x2cc00000 0 0x20000>;
 		interrupts = <0 69 4>;
 		interrupt-names = "DPU";
 		clocks = <&scmi_clk 0>;
 		clock-names = "aclk";
 		pl0: pipeline@0 {
 			reg = <0>;
 			clocks = <&scmi_clk 1>;
 			clock-names = "pxclk";
 			pl_id = <0>;
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				port@0 {
 					reg = <0>;
 					dp_pl0_out0: endpoint {
 						remote-endpoint = <&vencoder_in>;
 					};
 				};
 			};
 		};

 		pl1: pipeline@1 {
 			reg = <1>;
 			clocks = <&scmi_clk 2>;
 			clock-names = "pxclk";
 			pl_id = <1>;
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				port@0 {
 					reg = <0>;
 				};
 			};
 		};
 	};

 	ete0 {
 		compatible = "arm,embedded-trace-extension";
 		cpu = <&CPU0>;
 	};

 	ete1 {
 		compatible = "arm,embedded-trace-extension";
 		cpu = <&CPU1>;
 	};

 	ete2 {
 		compatible = "arm,embedded-trace-extension";
 		cpu = <&CPU2>;
 	};

 	ete3 {
 		compatible = "arm,embedded-trace-extension";
 		cpu = <&CPU3>;
 	};

 	ete4 {
 		compatible = "arm,embedded-trace-extension";
 		cpu = <&CPU4>;
 	};

 	ete5 {
 		compatible = "arm,embedded-trace-extension";
 		cpu = <&CPU5>;
 	};

 	ete6 {
 		compatible = "arm,embedded-trace-extension";
 		cpu = <&CPU6>;
 	};

 	ete7 {
 		compatible = "arm,embedded-trace-extension";
 		cpu = <&CPU7>;
 	};

 	trbe0 {
 		compatible = "arm,trace-buffer-extension";
 		interrupts = <1 2 4>;
 	};
 };
	/*
	* Copyright (c) 2020-2021, Arm Limited. All rights reserved.
	*
	* SPDX-License-Identifier: BSD-3-Clause
	*/

	/dts-v1/;

	/ {
	compatible = "arm,tc";
	interrupt-parent = <&gic>;
	#address-cells = <2>;
	#size-cells = <2>;

	aliases {
	serial0 = &soc_uart0;
	};

	chosen {
	bootargs = "console=ttyAMA0 debug user_debug=31 earlycon=pl011,0x7ff80000 loglevel=9 androidboot.hardware=total_compute androidboot.boot_devices=1c050000.mmci ip=dhcp androidboot.selinux=permissive allow_mismatched_32bit_el0";
	stdout-path = "serial0:115200n8";
	};

	cpus {
	#address-cells = <1>;
	#size-cells = <0>;

	cpu-map {
	cluster0 {
	core0 {
	cpu = <&CPU0>;
	};
	core1 {
	cpu = <&CPU1>;
	};
	core2 {
	cpu = <&CPU2>;
	};
	core3 {
	cpu = <&CPU3>;
	};
	core4 {
	cpu = <&CPU4>;
	};
	core5 {
	cpu = <&CPU5>;
	};
	core6 {
	cpu = <&CPU6>;
	};
	core7 {
	cpu = <&CPU7>;
	};
	};
	};

	/*
	* The timings below are just to demonstrate working cpuidle.
	* These values may be inaccurate.
	*/
	idle-states {
	entry-method = "arm,psci";

	CPU_SLEEP_0: cpu-sleep-0 {
	compatible = "arm,idle-state";
	arm,psci-suspend-param = <0x0010000>;
	local-timer-stop;
	entry-latency-us = <300>;
	exit-latency-us = <1200>;
	min-residency-us = <2000>;
	};
	CLUSTER_SLEEP_0: cluster-sleep-0 {
	compatible = "arm,idle-state";
	arm,psci-suspend-param = <0x1010000>;
	local-timer-stop;
	entry-latency-us = <400>;
	exit-latency-us = <1200>;
	min-residency-us = <2500>;
	};
	};

	amus {
	amu: amu-0 {
	#address-cells = <1>;
	#size-cells = <0>;

	mpmm_gear0: counter@0 {
	reg = <0>;

	enable-at-el3;
	};

	mpmm_gear1: counter@1 {
	reg = <1>;

	enable-at-el3;
	};

	mpmm_gear2: counter@2 {
	reg = <2>;

	enable-at-el3;
	};
	};
	};

	CPU0:cpu@0 {
	device_type = "cpu";
	compatible = "arm,armv8";
	reg = <0x0>;
	enable-method = "psci";
	clocks = <&scmi_dvfs 0>;
	cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
	capacity-dmips-mhz = <406>;
	amu = <&amu>;
	supports-mpmm;
	};

	CPU1:cpu@100 {
	device_type = "cpu";
	compatible = "arm,armv8";
	reg = <0x100>;
	enable-method = "psci";
	clocks = <&scmi_dvfs 0>;
	cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
	capacity-dmips-mhz = <406>;
	amu = <&amu>;
	supports-mpmm;
	};

	CPU2:cpu@200 {
	device_type = "cpu";
	compatible = "arm,armv8";
	reg = <0x200>;
	enable-method = "psci";
	clocks = <&scmi_dvfs 0>;
	cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
	capacity-dmips-mhz = <406>;
	amu = <&amu>;
	supports-mpmm;
	};

	CPU3:cpu@300 {
	device_type = "cpu";
	compatible = "arm,armv8";
	reg = <0x300>;
	enable-method = "psci";
	clocks = <&scmi_dvfs 0>;
	cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
	capacity-dmips-mhz = <406>;
	amu = <&amu>;
	supports-mpmm;
	};

	CPU4:cpu@400 {
	device_type = "cpu";
	compatible = "arm,armv8";
	reg = <0x400>;
	enable-method = "psci";
	clocks = <&scmi_dvfs 1>;
	cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
	capacity-dmips-mhz = <912>;
	amu = <&amu>;
	supports-mpmm;
	};

	CPU5:cpu@500 {
	device_type = "cpu";
	compatible = "arm,armv8";
	reg = <0x500>;
	enable-method = "psci";
	clocks = <&scmi_dvfs 1>;
	cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
	capacity-dmips-mhz = <912>;
	amu = <&amu>;
	supports-mpmm;
	};

	CPU6:cpu@600 {
	device_type = "cpu";
	compatible = "arm,armv8";
	reg = <0x600>;
	enable-method = "psci";
	clocks = <&scmi_dvfs 1>;
	cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
	capacity-dmips-mhz = <912>;
	amu = <&amu>;
	supports-mpmm;
	};

	CPU7:cpu@700 {
	device_type = "cpu";
	compatible = "arm,armv8";
	reg = <0x700>;
	enable-method = "psci";
	clocks = <&scmi_dvfs 2>;
	cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
	capacity-dmips-mhz = <1024>;
	amu = <&amu>;
	supports-mpmm;
	};

	};

	reserved-memory {
	#address-cells = <2>;
	#size-cells = <2>;
	ranges;

	optee@0xfce00000 {
	reg = <0x00000000 0xfce00000 0 0x00200000>;
	no-map;
	};
	};

	psci {
	compatible = "arm,psci-1.0", "arm,psci-0.2";
	method = "smc";
	};

	sram: sram@6000000 {
	compatible = "mmio-sram";
	reg = <0x0 0x06000000 0x0 0x8000>;

	#address-cells = <1>;
	#size-cells = <1>;
	ranges = <0 0x0 0x06000000 0x8000>;

	cpu_scp_scmi_mem: scp-shmem@0 {
	compatible = "arm,scmi-shmem";
	reg = <0x0 0x80>;
	};
	};

	mbox_db_rx: mhu@45010000 {
	compatible = "arm,mhuv2-rx","arm,primecell";
	reg = <0x0 0x45010000 0x0 0x1000>;
	clocks = <&soc_refclk100mhz>;
	clock-names = "apb_pclk";
	#mbox-cells = <2>;
	interrupts = <0 317 4>;
	interrupt-names = "mhu_rx";
	mhu-protocol = "doorbell";
	arm,mhuv2-protocols = <0 1>;
	};

	mbox_db_tx: mhu@45000000 {
	compatible = "arm,mhuv2-tx","arm,primecell";
	reg = <0x0 0x45000000 0x0 0x1000>;
	clocks = <&soc_refclk100mhz>;
	clock-names = "apb_pclk";
	#mbox-cells = <2>;
	interrupt-names = "mhu_tx";
	mhu-protocol = "doorbell";
	arm,mhuv2-protocols = <0 1>;
	};

	scmi {
	compatible = "arm,scmi";
	mbox-names = "tx", "rx";
	mboxes = <&mbox_db_tx 0 0 &mbox_db_rx 0 0 >;
	shmem = <&cpu_scp_scmi_mem &cpu_scp_scmi_mem>;
	#address-cells = <1>;
	#size-cells = <0>;

	scmi_dvfs: protocol@13 {
	reg = <0x13>;
	#clock-cells = <1>;
	};

	scmi_clk: protocol@14 {
	reg = <0x14>;
	#clock-cells = <1>;
	};
	};

	gic: interrupt-controller@2c010000 {
	compatible = "arm,gic-600", "arm,gic-v3";
	#address-cells = <2>;
	#interrupt-cells = <3>;
	#size-cells = <2>;
	ranges;
	interrupt-controller;
	reg = <0x0 0x30000000 0 0x10000>, /* GICD */
	<0x0 0x30080000 0 0x200000>; /* GICR */
	interrupts = <0x1 0x9 0x4>;
	};

	timer {
	compatible = "arm,armv8-timer";
	interrupts = <0x1 13 0x8>,
	<0x1 14 0x8>,
	<0x1 11 0x8>,
	<0x1 10 0x8>;
	};

	soc_refclk100mhz: refclk100mhz {
	compatible = "fixed-clock";
	#clock-cells = <0>;
	clock-frequency = <100000000>;
	clock-output-names = "apb_pclk";
	};

	soc_refclk60mhz: refclk60mhz {
	compatible = "fixed-clock";
	#clock-cells = <0>;
	clock-frequency = <60000000>;
	clock-output-names = "iofpga_clk";
	};

	soc_uartclk: uartclk {
	compatible = "fixed-clock";
	#clock-cells = <0>;
	clock-frequency = <50000000>;
	clock-output-names = "uartclk";
	};

	soc_uart0: uart@7ff80000 {
	compatible = "arm,pl011", "arm,primecell";
	reg = <0x0 0x7ff80000 0x0 0x1000>;
	interrupts = <0x0 116 0x4>;
	clocks = <&soc_uartclk>, <&soc_refclk100mhz>;
	clock-names = "uartclk", "apb_pclk";
	status = "okay";
	};

	vencoder {
	compatible = "drm,virtual-encoder";

	port {
	vencoder_in: endpoint {
	remote-endpoint = <&dp_pl0_out0>;
	};
	};

	display-timings {
	panel-timing {
	clock-frequency = <25175000>;
	hactive = <640>;
	vactive = <480>;
	hfront-porch = <16>;
	hback-porch = <48>;
	hsync-len = <96>;
	vfront-porch = <10>;
	vback-porch = <33>;
	vsync-len = <2>;
	};
	};

	};

	hdlcd: hdlcd@7ff60000 {
	compatible = "arm,hdlcd";
	reg = <0x0 0x7ff60000 0x0 0x1000>;
	interrupts = <0x0 117 0x4>;
	clocks = <&fake_hdlcd_clk>;
	clock-names = "pxlclk";
	status = "disabled";

	port {
	hdlcd_out: endpoint {
	remote-endpoint = <&vencoder_in>;
	};
	};
	};

	fake_hdlcd_clk: fake-hdlcd-clk {
	compatible = "fixed-clock";
	#clock-cells = <0>;
	clock-frequency = <25175000>;
	clock-output-names = "pxlclk";
	};

	ethernet@18000000 {
	compatible = "smsc,lan91c111";
	reg = <0x0 0x18000000 0x0 0x10000>;
	interrupts = <0 109 4>;
	};

	kmi@1c060000 {
	compatible = "arm,pl050", "arm,primecell";
	reg = <0x0 0x001c060000 0x0 0x1000>;
	interrupts = <0 197 4>;
	clocks = <&bp_clock24mhz>, <&bp_clock24mhz>;
	clock-names = "KMIREFCLK", "apb_pclk";
	};

	kmi@1c070000 {
	compatible = "arm,pl050", "arm,primecell";
	reg = <0x0 0x001c070000 0x0 0x1000>;
	interrupts = <0 103 4>;
	clocks = <&bp_clock24mhz>, <&bp_clock24mhz>;
	clock-names = "KMIREFCLK", "apb_pclk";
	};

	bp_clock24mhz: clock24mhz {
	compatible = "fixed-clock";
	#clock-cells = <0>;
	clock-frequency = <24000000>;
	clock-output-names = "bp:clock24mhz";
	};

	virtio_block@1c130000 {
	compatible = "virtio,mmio";
	reg = <0x0 0x1c130000 0x0 0x200>;
	interrupts = <0 204 4>;
	};

	sysreg: sysreg@1c010000 {
	compatible = "arm,vexpress-sysreg";
	reg = <0x0 0x001c010000 0x0 0x1000>;
	gpio-controller;
	#gpio-cells = <2>;
	};

	fixed_3v3: v2m-3v3 {
	compatible = "regulator-fixed";
	regulator-name = "3V3";
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	regulator-always-on;
	};

	mmci@1c050000 {
	compatible = "arm,pl180", "arm,primecell";
	reg = <0x0 0x001c050000 0x0 0x1000>;
	interrupts = <0 107 0x4>,
	<0 108 0x4>;
	cd-gpios = <&sysreg 0 0>;
	wp-gpios = <&sysreg 1 0>;
	bus-width = <8>;
	max-frequency = <12000000>;
	vmmc-supply = <&fixed_3v3>;
	clocks = <&bp_clock24mhz>, <&bp_clock24mhz>;
	clock-names = "mclk", "apb_pclk";
	};

	dp0: display@2cc00000 {
	#address-cells = <1>;
	#size-cells = <0>;
	compatible = "arm,mali-d71";
	reg = <0 0x2cc00000 0 0x20000>;
	interrupts = <0 69 4>;
	interrupt-names = "DPU";
	clocks = <&scmi_clk 0>;
	clock-names = "aclk";
	pl0: pipeline@0 {
	reg = <0>;
	clocks = <&scmi_clk 1>;
	clock-names = "pxclk";
	pl_id = <0>;
	ports {
	#address-cells = <1>;
	#size-cells = <0>;
	port@0 {
	reg = <0>;
	dp_pl0_out0: endpoint {
	remote-endpoint = <&vencoder_in>;
	};
	};
	};
	};

	pl1: pipeline@1 {
	reg = <1>;
	clocks = <&scmi_clk 2>;
	clock-names = "pxclk";
	pl_id = <1>;
	ports {
	#address-cells = <1>;
	#size-cells = <0>;
	port@0 {
	reg = <0>;
	};
	};
	};
	};

	ete0 {
	compatible = "arm,embedded-trace-extension";
	cpu = <&CPU0>;
	};

	ete1 {
	compatible = "arm,embedded-trace-extension";
	cpu = <&CPU1>;
	};

	ete2 {
	compatible = "arm,embedded-trace-extension";
	cpu = <&CPU2>;
	};

	ete3 {
	compatible = "arm,embedded-trace-extension";
	cpu = <&CPU3>;
	};

	ete4 {
	compatible = "arm,embedded-trace-extension";
	cpu = <&CPU4>;
	};

	ete5 {
	compatible = "arm,embedded-trace-extension";
	cpu = <&CPU5>;
	};

	ete6 {
	compatible = "arm,embedded-trace-extension";
	cpu = <&CPU6>;
	};

	ete7 {
	compatible = "arm,embedded-trace-extension";
	cpu = <&CPU7>;
	};

	trbe0 {
	compatible = "arm,trace-buffer-extension";
	interrupts = <1 2 4>;
	};
	};