drivers/arm/tzc/tzc400.c - filogic/atf - Gitiles

 /*
  * Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */

 #include <assert.h>
 #include <debug.h>
 #include <mmio.h>
 #include <stddef.h>
 #include <tzc400.h>
 #include "tzc_common_private.h"

 /*
  * Macros which will be used by common core functions.
  */
 #define TZC_400_REGION_BASE_LOW_0_OFFSET	U(0x100)
 #define TZC_400_REGION_BASE_HIGH_0_OFFSET	U(0x104)
 #define TZC_400_REGION_TOP_LOW_0_OFFSET		U(0x108)
 #define TZC_400_REGION_TOP_HIGH_0_OFFSET	U(0x10c)
 #define TZC_400_REGION_ATTR_0_OFFSET		U(0x110)
 #define TZC_400_REGION_ID_ACCESS_0_OFFSET	U(0x114)

 /*
  * Implementation defined values used to validate inputs later.
  * Filters : max of 4 ; 0 to 3
  * Regions : max of 9 ; 0 to 8
  * Address width : Values between 32 to 64
  */
 typedef struct tzc400_instance {
 	uintptr_t base;
 	uint8_t addr_width;
 	uint8_t num_filters;
 	uint8_t num_regions;
 } tzc400_instance_t;

 static tzc400_instance_t tzc400;

 static inline unsigned int _tzc400_read_build_config(uintptr_t base)
 {
 	return mmio_read_32(base + BUILD_CONFIG_OFF);
 }

 static inline unsigned int _tzc400_read_gate_keeper(uintptr_t base)
 {
 	return mmio_read_32(base + GATE_KEEPER_OFF);
 }

 static inline void _tzc400_write_gate_keeper(uintptr_t base, unsigned int val)
 {
 	mmio_write_32(base + GATE_KEEPER_OFF, val);
 }

 /*
  * Get the open status information for all filter units.
  */
 #define get_gate_keeper_os(_base)	((_tzc400_read_gate_keeper(_base) >>  \
 					GATE_KEEPER_OS_SHIFT) &		\
 					GATE_KEEPER_OS_MASK)


 /* Define common core functions used across different TZC peripherals. */
 DEFINE_TZC_COMMON_WRITE_ACTION(400, 400)
 DEFINE_TZC_COMMON_WRITE_REGION_BASE(400, 400)
 DEFINE_TZC_COMMON_WRITE_REGION_TOP(400, 400)
 DEFINE_TZC_COMMON_WRITE_REGION_ATTRIBUTES(400, 400)
 DEFINE_TZC_COMMON_WRITE_REGION_ID_ACCESS(400, 400)
 DEFINE_TZC_COMMON_CONFIGURE_REGION0(400)
 DEFINE_TZC_COMMON_CONFIGURE_REGION(400)

 static unsigned int _tzc400_get_gate_keeper(uintptr_t base,
 				unsigned int filter)
 {
 	unsigned int open_status;

 	open_status = get_gate_keeper_os(base);

 	return (open_status >> filter) & GATE_KEEPER_FILTER_MASK;
 }

 /* This function is not MP safe. */
 static void _tzc400_set_gate_keeper(uintptr_t base,
 				unsigned int filter,
 				int val)
 {
 	unsigned int open_status;

 	/* Upper half is current state. Lower half is requested state. */
 	open_status = get_gate_keeper_os(base);

 	if (val != 0)
 		open_status |=  (1U << filter);
 	else
 		open_status &= ~(1U << filter);

 	_tzc400_write_gate_keeper(base, (open_status & GATE_KEEPER_OR_MASK) <<
 			      GATE_KEEPER_OR_SHIFT);

 	/* Wait here until we see the change reflected in the TZC status. */
 	while ((get_gate_keeper_os(base)) != open_status)
 		;
 }

 void tzc400_set_action(unsigned int action)
 {
 	assert(tzc400.base != 0U);
 	assert(action <= TZC_ACTION_ERR_INT);

 	/*
 	 * - Currently no handler is provided to trap an error via interrupt
 	 *   or exception.
 	 * - The interrupt action has not been tested.
 	 */
 	_tzc400_write_action(tzc400.base, action);
 }

 void tzc400_init(uintptr_t base)
 {
 #if DEBUG
 	unsigned int tzc400_id;
 #endif
 	unsigned int tzc400_build;

 	assert(base != 0U);
 	tzc400.base = base;

 #if DEBUG
 	tzc400_id = _tzc_read_peripheral_id(base);
 	if (tzc400_id != TZC_400_PERIPHERAL_ID) {
 		ERROR("TZC-400 : Wrong device ID (0x%x).\n", tzc400_id);
 		panic();
 	}
 #endif

 	/* Save values we will use later. */
 	tzc400_build = _tzc400_read_build_config(tzc400.base);
 	tzc400.num_filters = (uint8_t)((tzc400_build >> BUILD_CONFIG_NF_SHIFT) &
 					BUILD_CONFIG_NF_MASK) + 1U;
 	tzc400.addr_width  = (uint8_t)((tzc400_build >> BUILD_CONFIG_AW_SHIFT) &
 					BUILD_CONFIG_AW_MASK) + 1U;
 	tzc400.num_regions = (uint8_t)((tzc400_build >> BUILD_CONFIG_NR_SHIFT) &
 					BUILD_CONFIG_NR_MASK) + 1U;
 }

 /*
  * `tzc400_configure_region0` is used to program region 0 into the TrustZone
  * controller. Region 0 covers the whole address space that is not mapped
  * to any other region, and is enabled on all filters; this cannot be
  * changed. This function only changes the access permissions.
  */
 void tzc400_configure_region0(unsigned int sec_attr,
 			   unsigned int ns_device_access)
 {
 	assert(tzc400.base != 0U);
 	assert(sec_attr <= TZC_REGION_S_RDWR);

 	_tzc400_configure_region0(tzc400.base, sec_attr, ns_device_access);
 }

 /*
  * `tzc400_configure_region` is used to program regions into the TrustZone
  * controller. A region can be associated with more than one filter. The
  * associated filters are passed in as a bitmap (bit0 = filter0).
  * NOTE:
  * Region 0 is special; it is preferable to use tzc400_configure_region0
  * for this region (see comment for that function).
  */
 void tzc400_configure_region(unsigned int filters,
 			  unsigned int region,
 			  unsigned long long region_base,
 			  unsigned long long region_top,
 			  unsigned int sec_attr,
 			  unsigned int nsaid_permissions)
 {
 	assert(tzc400.base != 0U);

 	/* Do range checks on filters and regions. */
 	assert(((filters >> tzc400.num_filters) == 0U) &&
 	       (region < tzc400.num_regions));

 	/*
 	 * Do address range check based on TZC configuration. A 64bit address is
 	 * the max and expected case.
 	 */
 	assert(((region_top <= _tzc_get_max_top_addr(tzc400.addr_width)) &&
 		(region_base < region_top)));

 	/* region_base and (region_top + 1) must be 4KB aligned */
 	assert(((region_base | (region_top + 1U)) & (4096U - 1U)) == 0U);

 	assert(sec_attr <= TZC_REGION_S_RDWR);

 	_tzc400_configure_region(tzc400.base, filters, region, region_base,
 						region_top,
 						sec_attr, nsaid_permissions);
 }

 void tzc400_enable_filters(void)
 {
 	unsigned int state;
 	unsigned int filter;

 	assert(tzc400.base != 0U);

 	for (filter = 0U; filter < tzc400.num_filters; filter++) {
 		state = _tzc400_get_gate_keeper(tzc400.base, filter);
 		if (state != 0U) {
 			/*
 			 * The TZC filter is already configured. Changing the
 			 * programmer's view in an active system can cause
 			 * unpredictable behavior therefore panic for now rather
 			 * than try to determine whether this is safe in this
 			 * instance.
 			 *
 			 * See the 'ARM (R) CoreLink TM TZC-400 TrustZone (R)
 			 * Address Space Controller' Technical Reference Manual.
 			 */
 			ERROR("TZC-400 : Filter %d Gatekeeper already"
 				" enabled.\n", filter);
 			panic();
 		}
 		_tzc400_set_gate_keeper(tzc400.base, filter, 1);
 	}
 }

 void tzc400_disable_filters(void)
 {
 	unsigned int filter;

 	assert(tzc400.base != 0U);

 	/*
 	 * We don't do the same state check as above as the Gatekeepers are
 	 * disabled after reset.
 	 */
 	for (filter = 0; filter < tzc400.num_filters; filter++)
 		_tzc400_set_gate_keeper(tzc400.base, filter, 0);
 }
	/*
	* Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved.
	*
	* SPDX-License-Identifier: BSD-3-Clause
	*/

	#include <assert.h>
	#include <debug.h>
	#include <mmio.h>
	#include <stddef.h>
	#include <tzc400.h>
	#include "tzc_common_private.h"

	/*
	* Macros which will be used by common core functions.
	*/
	#define TZC_400_REGION_BASE_LOW_0_OFFSET U(0x100)
	#define TZC_400_REGION_BASE_HIGH_0_OFFSET U(0x104)
	#define TZC_400_REGION_TOP_LOW_0_OFFSET U(0x108)
	#define TZC_400_REGION_TOP_HIGH_0_OFFSET U(0x10c)
	#define TZC_400_REGION_ATTR_0_OFFSET U(0x110)
	#define TZC_400_REGION_ID_ACCESS_0_OFFSET U(0x114)

	/*
	* Implementation defined values used to validate inputs later.
	* Filters : max of 4 ; 0 to 3
	* Regions : max of 9 ; 0 to 8
	* Address width : Values between 32 to 64
	*/
	typedef struct tzc400_instance {
	uintptr_t base;
	uint8_t addr_width;
	uint8_t num_filters;
	uint8_t num_regions;
	} tzc400_instance_t;

	static tzc400_instance_t tzc400;

	static inline unsigned int _tzc400_read_build_config(uintptr_t base)
	{
	return mmio_read_32(base + BUILD_CONFIG_OFF);
	}

	static inline unsigned int _tzc400_read_gate_keeper(uintptr_t base)
	{
	return mmio_read_32(base + GATE_KEEPER_OFF);
	}

	static inline void _tzc400_write_gate_keeper(uintptr_t base, unsigned int val)
	{
	mmio_write_32(base + GATE_KEEPER_OFF, val);
	}

	/*
	* Get the open status information for all filter units.
	*/
	#define get_gate_keeper_os(_base) ((_tzc400_read_gate_keeper(_base) >> \
	GATE_KEEPER_OS_SHIFT) & \
	GATE_KEEPER_OS_MASK)


	/* Define common core functions used across different TZC peripherals. */
	DEFINE_TZC_COMMON_WRITE_ACTION(400, 400)
	DEFINE_TZC_COMMON_WRITE_REGION_BASE(400, 400)
	DEFINE_TZC_COMMON_WRITE_REGION_TOP(400, 400)
	DEFINE_TZC_COMMON_WRITE_REGION_ATTRIBUTES(400, 400)
	DEFINE_TZC_COMMON_WRITE_REGION_ID_ACCESS(400, 400)
	DEFINE_TZC_COMMON_CONFIGURE_REGION0(400)
	DEFINE_TZC_COMMON_CONFIGURE_REGION(400)

	static unsigned int _tzc400_get_gate_keeper(uintptr_t base,
	unsigned int filter)
	{
	unsigned int open_status;

	open_status = get_gate_keeper_os(base);

	return (open_status >> filter) & GATE_KEEPER_FILTER_MASK;
	}

	/* This function is not MP safe. */
	static void _tzc400_set_gate_keeper(uintptr_t base,
	unsigned int filter,
	int val)
	{
	unsigned int open_status;

	/* Upper half is current state. Lower half is requested state. */
	open_status = get_gate_keeper_os(base);

	if (val != 0)
	open_status \|= (1U << filter);
	else
	open_status &= ~(1U << filter);

	_tzc400_write_gate_keeper(base, (open_status & GATE_KEEPER_OR_MASK) <<
	GATE_KEEPER_OR_SHIFT);

	/* Wait here until we see the change reflected in the TZC status. */
	while ((get_gate_keeper_os(base)) != open_status)
	;
	}

	void tzc400_set_action(unsigned int action)
	{
	assert(tzc400.base != 0U);
	assert(action <= TZC_ACTION_ERR_INT);

	/*
	* - Currently no handler is provided to trap an error via interrupt
	* or exception.
	* - The interrupt action has not been tested.
	*/
	_tzc400_write_action(tzc400.base, action);
	}

	void tzc400_init(uintptr_t base)
	{
	#if DEBUG
	unsigned int tzc400_id;
	#endif
	unsigned int tzc400_build;

	assert(base != 0U);
	tzc400.base = base;

	#if DEBUG
	tzc400_id = _tzc_read_peripheral_id(base);
	if (tzc400_id != TZC_400_PERIPHERAL_ID) {
	ERROR("TZC-400 : Wrong device ID (0x%x).\n", tzc400_id);
	panic();
	}
	#endif

	/* Save values we will use later. */
	tzc400_build = _tzc400_read_build_config(tzc400.base);
	tzc400.num_filters = (uint8_t)((tzc400_build >> BUILD_CONFIG_NF_SHIFT) &
	BUILD_CONFIG_NF_MASK) + 1U;
	tzc400.addr_width = (uint8_t)((tzc400_build >> BUILD_CONFIG_AW_SHIFT) &
	BUILD_CONFIG_AW_MASK) + 1U;
	tzc400.num_regions = (uint8_t)((tzc400_build >> BUILD_CONFIG_NR_SHIFT) &
	BUILD_CONFIG_NR_MASK) + 1U;
	}

	/*
	* `tzc400_configure_region0` is used to program region 0 into the TrustZone
	* controller. Region 0 covers the whole address space that is not mapped
	* to any other region, and is enabled on all filters; this cannot be
	* changed. This function only changes the access permissions.
	*/
	void tzc400_configure_region0(unsigned int sec_attr,
	unsigned int ns_device_access)
	{
	assert(tzc400.base != 0U);
	assert(sec_attr <= TZC_REGION_S_RDWR);

	_tzc400_configure_region0(tzc400.base, sec_attr, ns_device_access);
	}

	/*
	* `tzc400_configure_region` is used to program regions into the TrustZone
	* controller. A region can be associated with more than one filter. The
	* associated filters are passed in as a bitmap (bit0 = filter0).
	* NOTE:
	* Region 0 is special; it is preferable to use tzc400_configure_region0
	* for this region (see comment for that function).
	*/
	void tzc400_configure_region(unsigned int filters,
	unsigned int region,
	unsigned long long region_base,
	unsigned long long region_top,
	unsigned int sec_attr,
	unsigned int nsaid_permissions)
	{
	assert(tzc400.base != 0U);

	/* Do range checks on filters and regions. */
	assert(((filters >> tzc400.num_filters) == 0U) &&
	(region < tzc400.num_regions));

	/*
	* Do address range check based on TZC configuration. A 64bit address is
	* the max and expected case.
	*/
	assert(((region_top <= _tzc_get_max_top_addr(tzc400.addr_width)) &&
	(region_base < region_top)));

	/* region_base and (region_top + 1) must be 4KB aligned */
	assert(((region_base \| (region_top + 1U)) & (4096U - 1U)) == 0U);

	assert(sec_attr <= TZC_REGION_S_RDWR);

	_tzc400_configure_region(tzc400.base, filters, region, region_base,
	region_top,
	sec_attr, nsaid_permissions);
	}

	void tzc400_enable_filters(void)
	{
	unsigned int state;
	unsigned int filter;

	assert(tzc400.base != 0U);

	for (filter = 0U; filter < tzc400.num_filters; filter++) {
	state = _tzc400_get_gate_keeper(tzc400.base, filter);
	if (state != 0U) {
	/*
	* The TZC filter is already configured. Changing the
	* programmer's view in an active system can cause
	* unpredictable behavior therefore panic for now rather
	* than try to determine whether this is safe in this
	* instance.
	*
	* See the 'ARM (R) CoreLink TM TZC-400 TrustZone (R)
	* Address Space Controller' Technical Reference Manual.
	*/
	ERROR("TZC-400 : Filter %d Gatekeeper already"
	" enabled.\n", filter);
	panic();
	}
	_tzc400_set_gate_keeper(tzc400.base, filter, 1);
	}
	}

	void tzc400_disable_filters(void)
	{
	unsigned int filter;

	assert(tzc400.base != 0U);

	/*
	* We don't do the same state check as above as the Gatekeepers are
	* disabled after reset.
	*/
	for (filter = 0; filter < tzc400.num_filters; filter++)
	_tzc400_set_gate_keeper(tzc400.base, filter, 0);
	}