blob: eef07a8be501892dad35d09e16c7a9a6b36274a9 [file] [log] [blame]
/*
* Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <arch.h>
#include <asm_macros.S>
.globl flush_dcache_range
.globl clean_dcache_range
.globl inv_dcache_range
.globl dcsw_op_louis
.globl dcsw_op_all
.globl dcsw_op_level1
.globl dcsw_op_level2
.globl dcsw_op_level3
/*
* This macro can be used for implementing various data cache operations `op`
*/
.macro do_dcache_maintenance_by_mva op
dcache_line_size x2, x3
add x1, x0, x1
sub x3, x2, #1
bic x0, x0, x3
loop_\op:
dc \op, x0
add x0, x0, x2
cmp x0, x1
b.lo loop_\op
dsb sy
ret
.endm
/* ------------------------------------------
* Clean+Invalidate from base address till
* size. 'x0' = addr, 'x1' = size
* ------------------------------------------
*/
func flush_dcache_range
do_dcache_maintenance_by_mva civac
endfunc flush_dcache_range
/* ------------------------------------------
* Clean from base address till size.
* 'x0' = addr, 'x1' = size
* ------------------------------------------
*/
func clean_dcache_range
do_dcache_maintenance_by_mva cvac
endfunc clean_dcache_range
/* ------------------------------------------
* Invalidate from base address till
* size. 'x0' = addr, 'x1' = size
* ------------------------------------------
*/
func inv_dcache_range
do_dcache_maintenance_by_mva ivac
endfunc inv_dcache_range
/* ---------------------------------------------------------------
* Data cache operations by set/way to the level specified
*
* The main function, do_dcsw_op requires:
* x0: The operation type (0-2), as defined in arch.h
* x3: The last cache level to operate on
* x9: clidr_el1
* x10: The cache level to begin operation from
* and will carry out the operation on each data cache from level 0
* to the level in x3 in sequence
*
* The dcsw_op macro sets up the x3 and x9 parameters based on
* clidr_el1 cache information before invoking the main function
* ---------------------------------------------------------------
*/
.macro dcsw_op shift, fw, ls
mrs x9, clidr_el1
ubfx x3, x9, \shift, \fw
lsl x3, x3, \ls
mov x10, xzr
b do_dcsw_op
.endm
func do_dcsw_op
cbz x3, exit
adr x14, dcsw_loop_table // compute inner loop address
add x14, x14, x0, lsl #5 // inner loop is 8x32-bit instructions
mov x0, x9
mov w8, #1
loop1:
add x2, x10, x10, lsr #1 // work out 3x current cache level
lsr x1, x0, x2 // extract cache type bits from clidr
and x1, x1, #7 // mask the bits for current cache only
cmp x1, #2 // see what cache we have at this level
b.lo level_done // nothing to do if no cache or icache
msr csselr_el1, x10 // select current cache level in csselr
isb // isb to sych the new cssr&csidr
mrs x1, ccsidr_el1 // read the new ccsidr
and x2, x1, #7 // extract the length of the cache lines
add x2, x2, #4 // add 4 (line length offset)
ubfx x4, x1, #3, #10 // maximum way number
clz w5, w4 // bit position of way size increment
lsl w9, w4, w5 // w9 = aligned max way number
lsl w16, w8, w5 // w16 = way number loop decrement
orr w9, w10, w9 // w9 = combine way and cache number
ubfx w6, w1, #13, #15 // w6 = max set number
lsl w17, w8, w2 // w17 = set number loop decrement
dsb sy // barrier before we start this level
br x14 // jump to DC operation specific loop
.macro dcsw_loop _op
loop2_\_op:
lsl w7, w6, w2 // w7 = aligned max set number
loop3_\_op:
orr w11, w9, w7 // combine cache, way and set number
dc \_op, x11
subs w7, w7, w17 // decrement set number
b.hs loop3_\_op
subs x9, x9, x16 // decrement way number
b.hs loop2_\_op
b level_done
.endm
level_done:
add x10, x10, #2 // increment cache number
cmp x3, x10
b.hi loop1
msr csselr_el1, xzr // select cache level 0 in csselr
dsb sy // barrier to complete final cache operation
isb
exit:
ret
endfunc do_dcsw_op
dcsw_loop_table:
dcsw_loop isw
dcsw_loop cisw
dcsw_loop csw
func dcsw_op_louis
dcsw_op #LOUIS_SHIFT, #CLIDR_FIELD_WIDTH, #LEVEL_SHIFT
endfunc dcsw_op_louis
func dcsw_op_all
dcsw_op #LOC_SHIFT, #CLIDR_FIELD_WIDTH, #LEVEL_SHIFT
endfunc dcsw_op_all
/* ---------------------------------------------------------------
* Helper macro for data cache operations by set/way for the
* level specified
* ---------------------------------------------------------------
*/
.macro dcsw_op_level level
mrs x9, clidr_el1
mov x3, \level
sub x10, x3, #2
b do_dcsw_op
.endm
/* ---------------------------------------------------------------
* Data cache operations by set/way for level 1 cache
*
* The main function, do_dcsw_op requires:
* x0: The operation type (0-2), as defined in arch.h
* ---------------------------------------------------------------
*/
func dcsw_op_level1
dcsw_op_level #(1 << LEVEL_SHIFT)
endfunc dcsw_op_level1
/* ---------------------------------------------------------------
* Data cache operations by set/way for level 2 cache
*
* The main function, do_dcsw_op requires:
* x0: The operation type (0-2), as defined in arch.h
* ---------------------------------------------------------------
*/
func dcsw_op_level2
dcsw_op_level #(2 << LEVEL_SHIFT)
endfunc dcsw_op_level2
/* ---------------------------------------------------------------
* Data cache operations by set/way for level 3 cache
*
* The main function, do_dcsw_op requires:
* x0: The operation type (0-2), as defined in arch.h
* ---------------------------------------------------------------
*/
func dcsw_op_level3
dcsw_op_level #(3 << LEVEL_SHIFT)
endfunc dcsw_op_level3