| /* |
| * Copyright (c) 2015-2020, Renesas Electronics Corporation. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <stdint.h> |
| #include <string.h> |
| |
| #include <arch_helpers.h> |
| #include <common/debug.h> |
| #include <lib/mmio.h> |
| |
| #include "cpg_registers.h" |
| #include "rcar_def.h" |
| #include "rcar_private.h" |
| |
| /* DMA CHANNEL setting (0/16/32) */ |
| #if RCAR_LSI == RCAR_V3M |
| #define DMA_CH 16 |
| #else |
| #define DMA_CH 0 |
| #endif |
| |
| #if (DMA_CH == 0) |
| #define SYS_DMAC_BIT ((uint32_t)1U << 19U) |
| #define DMA_BASE (0xE6700000U) |
| #elif (DMA_CH == 16) |
| #define SYS_DMAC_BIT ((uint32_t)1U << 18U) |
| #define DMA_BASE (0xE7300000U) |
| #elif (DMA_CH == 32) |
| #define SYS_DMAC_BIT ((uint32_t)1U << 17U) |
| #define DMA_BASE (0xE7320000U) |
| #else |
| #define SYS_DMAC_BIT ((uint32_t)1U << 19U) |
| #define DMA_BASE (0xE6700000U) |
| #endif |
| |
| /* DMA operation */ |
| #define DMA_DMAOR (DMA_BASE + 0x0060U) |
| /* DMA secure control */ |
| #define DMA_DMASEC (DMA_BASE + 0x0030U) |
| /* DMA channel clear */ |
| #define DMA_DMACHCLR (DMA_BASE + 0x0080U) |
| /* DMA source address */ |
| #define DMA_DMASAR (DMA_BASE + 0x8000U) |
| /* DMA destination address */ |
| #define DMA_DMADAR (DMA_BASE + 0x8004U) |
| /* DMA transfer count */ |
| #define DMA_DMATCR (DMA_BASE + 0x8008U) |
| /* DMA channel control */ |
| #define DMA_DMACHCR (DMA_BASE + 0x800CU) |
| /* DMA fixed destination address */ |
| #define DMA_DMAFIXDAR (DMA_BASE + 0x8014U) |
| |
| #define DMA_USE_CHANNEL (0x00000001U) |
| #define DMAOR_INITIAL (0x0301U) |
| #define DMACHCLR_CH_ALL (0x0000FFFFU) |
| #define DMAFIXDAR_32BIT_SHIFT (32U) |
| #define DMAFIXDAR_DAR_MASK (0x000000FFU) |
| #define DMADAR_BOUNDARY_ADDR (0x100000000ULL) |
| #define DMATCR_CNT_SHIFT (6U) |
| #define DMATCR_MAX (0x00FFFFFFU) |
| #define DMACHCR_TRN_MODE (0x00105409U) |
| #define DMACHCR_DE_BIT (0x00000001U) |
| #define DMACHCR_TE_BIT (0x00000002U) |
| #define DMACHCR_CHE_BIT (0x80000000U) |
| |
| #define DMA_SIZE_UNIT FLASH_TRANS_SIZE_UNIT |
| #define DMA_FRACTION_MASK (0xFFU) |
| #define DMA_DST_LIMIT (0x10000000000ULL) |
| |
| /* transfer length limit */ |
| #define DMA_LENGTH_LIMIT ((DMATCR_MAX * (1U << DMATCR_CNT_SHIFT)) \ |
| & ~DMA_FRACTION_MASK) |
| |
| static void dma_enable(void) |
| { |
| mstpcr_write(CPG_SMSTPCR2, CPG_MSTPSR2, SYS_DMAC_BIT); |
| } |
| |
| static void dma_setup(void) |
| { |
| mmio_write_16(DMA_DMAOR, 0); |
| mmio_write_32(DMA_DMACHCLR, DMACHCLR_CH_ALL); |
| } |
| |
| static void dma_start(uintptr_t dst, uint32_t src, uint32_t len) |
| { |
| mmio_write_16(DMA_DMAOR, DMAOR_INITIAL); |
| mmio_write_32(DMA_DMAFIXDAR, (dst >> DMAFIXDAR_32BIT_SHIFT) & |
| DMAFIXDAR_DAR_MASK); |
| mmio_write_32(DMA_DMADAR, dst & UINT32_MAX); |
| mmio_write_32(DMA_DMASAR, src); |
| mmio_write_32(DMA_DMATCR, len >> DMATCR_CNT_SHIFT); |
| mmio_write_32(DMA_DMASEC, DMA_USE_CHANNEL); |
| mmio_write_32(DMA_DMACHCR, DMACHCR_TRN_MODE); |
| } |
| |
| static void dma_end(void) |
| { |
| while ((mmio_read_32(DMA_DMACHCR) & DMACHCR_TE_BIT) == 0) { |
| if ((mmio_read_32(DMA_DMACHCR) & DMACHCR_CHE_BIT) != 0U) { |
| ERROR("BL2: DMA - Channel Address Error\n"); |
| panic(); |
| break; |
| } |
| } |
| /* DMA transfer Disable */ |
| mmio_clrbits_32(DMA_DMACHCR, DMACHCR_DE_BIT); |
| while ((mmio_read_32(DMA_DMACHCR) & DMACHCR_DE_BIT) != 0) |
| ; |
| |
| mmio_write_32(DMA_DMASEC, 0); |
| mmio_write_16(DMA_DMAOR, 0); |
| mmio_write_32(DMA_DMACHCLR, DMA_USE_CHANNEL); |
| } |
| |
| void rcar_dma_exec(uintptr_t dst, uint32_t src, uint32_t len) |
| { |
| uint32_t dma_len = len; |
| |
| if (len & DMA_FRACTION_MASK) |
| dma_len = (len + DMA_SIZE_UNIT) & ~DMA_FRACTION_MASK; |
| |
| if (!dma_len || dma_len > DMA_LENGTH_LIMIT) { |
| ERROR("BL2: DMA - size invalid, length (0x%x)\n", dma_len); |
| panic(); |
| } |
| |
| if (src & DMA_FRACTION_MASK) { |
| ERROR("BL2: DMA - src address invalid (0x%x), len=(0x%x)\n", |
| src, dma_len); |
| panic(); |
| } |
| |
| if ((dst & UINT32_MAX) + dma_len > DMADAR_BOUNDARY_ADDR || |
| (dst + dma_len > DMA_DST_LIMIT) || |
| (dst & DMA_FRACTION_MASK)) { |
| ERROR("BL2: DMA - dest address invalid (0x%lx), len=(0x%x)\n", |
| dst, dma_len); |
| panic(); |
| } |
| |
| dma_start(dst, src, dma_len); |
| dma_end(); |
| } |
| |
| void rcar_dma_init(void) |
| { |
| dma_enable(); |
| dma_setup(); |
| } |