| /* |
| * Copyright (c) 2013-2024, Arm Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <assert.h> |
| #include <string.h> |
| |
| #include <common/debug.h> |
| #include <drivers/arm/cci.h> |
| #include <drivers/arm/ccn.h> |
| #include <drivers/arm/gicv2.h> |
| #include <drivers/arm/sp804_delay_timer.h> |
| #include <drivers/generic_delay_timer.h> |
| #include <fconf_hw_config_getter.h> |
| #include <lib/mmio.h> |
| #include <lib/smccc.h> |
| #include <lib/xlat_tables/xlat_tables_compat.h> |
| #include <platform_def.h> |
| #include <services/arm_arch_svc.h> |
| #include <services/rmm_core_manifest.h> |
| #if SPM_MM |
| #include <services/spm_mm_partition.h> |
| #endif |
| |
| #include <plat/arm/common/arm_config.h> |
| #include <plat/arm/common/plat_arm.h> |
| #include <plat/common/platform.h> |
| |
| #include "fvp_private.h" |
| |
| /* Defines for GIC Driver build time selection */ |
| #define FVP_GICV2 1 |
| #define FVP_GICV3 2 |
| |
| /* Defines for RMM Console*/ |
| #define FVP_RMM_CONSOLE_BASE UL(0x1c0c0000) |
| #define FVP_RMM_CONSOLE_BAUD UL(115200) |
| #define FVP_RMM_CONSOLE_CLK_IN_HZ UL(14745600) |
| #define FVP_RMM_CONSOLE_NAME "pl011" |
| |
| #define FVP_RMM_CONSOLE_COUNT UL(1) |
| |
| /******************************************************************************* |
| * arm_config holds the characteristics of the differences between the three FVP |
| * platforms (Base, A53_A57 & Foundation). It will be populated during cold boot |
| * at each boot stage by the primary before enabling the MMU (to allow |
| * interconnect configuration) & used thereafter. Each BL will have its own copy |
| * to allow independent operation. |
| ******************************************************************************/ |
| arm_config_t arm_config; |
| |
| #define MAP_DEVICE0 MAP_REGION_FLAT(DEVICE0_BASE, \ |
| DEVICE0_SIZE, \ |
| MT_DEVICE | MT_RW | MT_SECURE) |
| |
| #define MAP_DEVICE1 MAP_REGION_FLAT(DEVICE1_BASE, \ |
| DEVICE1_SIZE, \ |
| MT_DEVICE | MT_RW | MT_SECURE) |
| |
| #if FVP_GICR_REGION_PROTECTION |
| #define MAP_GICD_MEM MAP_REGION_FLAT(BASE_GICD_BASE, \ |
| BASE_GICD_SIZE, \ |
| MT_DEVICE | MT_RW | MT_SECURE) |
| |
| /* Map all core's redistributor memory as read-only. After boots up, |
| * per-core map its redistributor memory as read-write */ |
| #define MAP_GICR_MEM MAP_REGION_FLAT(BASE_GICR_BASE, \ |
| (BASE_GICR_SIZE * PLATFORM_CORE_COUNT),\ |
| MT_DEVICE | MT_RO | MT_SECURE) |
| #endif /* FVP_GICR_REGION_PROTECTION */ |
| |
| /* |
| * Need to be mapped with write permissions in order to set a new non-volatile |
| * counter value. |
| */ |
| #define MAP_DEVICE2 MAP_REGION_FLAT(DEVICE2_BASE, \ |
| DEVICE2_SIZE, \ |
| MT_DEVICE | MT_RW | MT_SECURE) |
| |
| #if TRANSFER_LIST |
| #ifdef FW_NS_HANDOFF_BASE |
| #define MAP_FW_NS_HANDOFF MAP_REGION_FLAT(FW_NS_HANDOFF_BASE, \ |
| FW_HANDOFF_SIZE, \ |
| MT_MEMORY | MT_RW | MT_NS) |
| #endif |
| #endif |
| |
| /* |
| * Table of memory regions for various BL stages to map using the MMU. |
| * This doesn't include Trusted SRAM as setup_page_tables() already takes care |
| * of mapping it. |
| */ |
| #ifdef IMAGE_BL1 |
| const mmap_region_t plat_arm_mmap[] = { |
| ARM_MAP_SHARED_RAM, |
| V2M_MAP_FLASH0_RO, |
| V2M_MAP_IOFPGA, |
| MAP_DEVICE0, |
| #if FVP_INTERCONNECT_DRIVER == FVP_CCN |
| MAP_DEVICE1, |
| #endif |
| #if TRUSTED_BOARD_BOOT |
| /* To access the Root of Trust Public Key registers. */ |
| MAP_DEVICE2, |
| /* Map DRAM to authenticate NS_BL2U image. */ |
| ARM_MAP_NS_DRAM1, |
| #endif |
| {0} |
| }; |
| #endif |
| #ifdef IMAGE_BL2 |
| const mmap_region_t plat_arm_mmap[] = { |
| ARM_MAP_SHARED_RAM, |
| V2M_MAP_FLASH0_RW, |
| V2M_MAP_IOFPGA, |
| MAP_DEVICE0, |
| #if FVP_INTERCONNECT_DRIVER == FVP_CCN |
| MAP_DEVICE1, |
| #endif |
| ARM_MAP_NS_DRAM1, |
| #ifdef __aarch64__ |
| ARM_MAP_DRAM2, |
| #endif |
| /* |
| * Required to load HW_CONFIG, SPMC and SPs to trusted DRAM. |
| */ |
| ARM_MAP_TRUSTED_DRAM, |
| |
| /* |
| * Required to load Event Log in TZC secured memory |
| */ |
| #if MEASURED_BOOT && (defined(SPD_tspd) || defined(SPD_opteed) || \ |
| defined(SPD_spmd)) |
| ARM_MAP_EVENT_LOG_DRAM1, |
| #endif /* MEASURED_BOOT && (SPD_tspd || SPD_opteed || SPD_spmd) */ |
| |
| #if ENABLE_RME |
| ARM_MAP_RMM_DRAM, |
| ARM_MAP_GPT_L1_DRAM, |
| #endif /* ENABLE_RME */ |
| #ifdef SPD_tspd |
| ARM_MAP_TSP_SEC_MEM, |
| #endif |
| #if TRUSTED_BOARD_BOOT |
| /* To access the Root of Trust Public Key registers. */ |
| MAP_DEVICE2, |
| #endif /* TRUSTED_BOARD_BOOT */ |
| |
| #if CRYPTO_SUPPORT && !RESET_TO_BL2 |
| /* |
| * To access shared the Mbed TLS heap while booting the |
| * system with Crypto support |
| */ |
| ARM_MAP_BL1_RW, |
| #endif /* CRYPTO_SUPPORT && !RESET_TO_BL2 */ |
| #if SPM_MM || SPMC_AT_EL3 |
| ARM_SP_IMAGE_MMAP, |
| #endif |
| #if ARM_BL31_IN_DRAM |
| ARM_MAP_BL31_SEC_DRAM, |
| #endif |
| #ifdef SPD_opteed |
| ARM_MAP_OPTEE_CORE_MEM, |
| ARM_OPTEE_PAGEABLE_LOAD_MEM, |
| #endif |
| {0} |
| }; |
| #endif |
| #ifdef IMAGE_BL2U |
| const mmap_region_t plat_arm_mmap[] = { |
| MAP_DEVICE0, |
| V2M_MAP_IOFPGA, |
| {0} |
| }; |
| #endif |
| #ifdef IMAGE_BL31 |
| const mmap_region_t plat_arm_mmap[] = { |
| ARM_MAP_SHARED_RAM, |
| #if USE_DEBUGFS |
| /* Required by devfip, can be removed if devfip is not used */ |
| V2M_MAP_FLASH0_RW, |
| #endif /* USE_DEBUGFS */ |
| ARM_MAP_EL3_TZC_DRAM, |
| V2M_MAP_IOFPGA, |
| MAP_DEVICE0, |
| #if FVP_GICR_REGION_PROTECTION |
| MAP_GICD_MEM, |
| MAP_GICR_MEM, |
| #else |
| MAP_DEVICE1, |
| #endif /* FVP_GICR_REGION_PROTECTION */ |
| ARM_V2M_MAP_MEM_PROTECT, |
| #if SPM_MM |
| ARM_SPM_BUF_EL3_MMAP, |
| #endif |
| #if ENABLE_RME |
| ARM_MAP_GPT_L1_DRAM, |
| ARM_MAP_EL3_RMM_SHARED_MEM, |
| #endif |
| #ifdef MAP_FW_NS_HANDOFF |
| MAP_FW_NS_HANDOFF, |
| #endif |
| {0} |
| }; |
| |
| #if defined(IMAGE_BL31) && SPM_MM |
| const mmap_region_t plat_arm_secure_partition_mmap[] = { |
| V2M_MAP_IOFPGA_EL0, /* for the UART */ |
| MAP_REGION_FLAT(DEVICE0_BASE, |
| DEVICE0_SIZE, |
| MT_DEVICE | MT_RO | MT_SECURE | MT_USER), |
| ARM_SP_IMAGE_MMAP, |
| ARM_SP_IMAGE_NS_BUF_MMAP, |
| ARM_SP_IMAGE_RW_MMAP, |
| ARM_SPM_BUF_EL0_MMAP, |
| {0} |
| }; |
| #endif |
| #endif |
| #ifdef IMAGE_BL32 |
| const mmap_region_t plat_arm_mmap[] = { |
| #ifndef __aarch64__ |
| ARM_MAP_SHARED_RAM, |
| ARM_V2M_MAP_MEM_PROTECT, |
| #endif |
| V2M_MAP_IOFPGA, |
| MAP_DEVICE0, |
| MAP_DEVICE1, |
| {0} |
| }; |
| #endif |
| |
| #ifdef IMAGE_RMM |
| const mmap_region_t plat_arm_mmap[] = { |
| V2M_MAP_IOFPGA, |
| MAP_DEVICE0, |
| MAP_DEVICE1, |
| {0} |
| }; |
| #endif |
| |
| ARM_CASSERT_MMAP |
| |
| #if FVP_INTERCONNECT_DRIVER != FVP_CCN |
| static const int fvp_cci400_map[] = { |
| PLAT_FVP_CCI400_CLUS0_SL_PORT, |
| PLAT_FVP_CCI400_CLUS1_SL_PORT, |
| }; |
| |
| static const int fvp_cci5xx_map[] = { |
| PLAT_FVP_CCI5XX_CLUS0_SL_PORT, |
| PLAT_FVP_CCI5XX_CLUS1_SL_PORT, |
| }; |
| |
| static unsigned int get_interconnect_master(void) |
| { |
| unsigned int master; |
| u_register_t mpidr; |
| |
| mpidr = read_mpidr_el1(); |
| master = ((arm_config.flags & ARM_CONFIG_FVP_SHIFTED_AFF) != 0U) ? |
| MPIDR_AFFLVL2_VAL(mpidr) : MPIDR_AFFLVL1_VAL(mpidr); |
| |
| assert(master < FVP_CLUSTER_COUNT); |
| return master; |
| } |
| #endif |
| |
| #if defined(IMAGE_BL31) && SPM_MM |
| /* |
| * Boot information passed to a secure partition during initialisation. Linear |
| * indices in MP information will be filled at runtime. |
| */ |
| static spm_mm_mp_info_t sp_mp_info[] = { |
| [0] = {0x80000000, 0}, |
| [1] = {0x80000001, 0}, |
| [2] = {0x80000002, 0}, |
| [3] = {0x80000003, 0}, |
| [4] = {0x80000100, 0}, |
| [5] = {0x80000101, 0}, |
| [6] = {0x80000102, 0}, |
| [7] = {0x80000103, 0}, |
| }; |
| |
| const spm_mm_boot_info_t plat_arm_secure_partition_boot_info = { |
| .h.type = PARAM_SP_IMAGE_BOOT_INFO, |
| .h.version = VERSION_1, |
| .h.size = sizeof(spm_mm_boot_info_t), |
| .h.attr = 0, |
| .sp_mem_base = ARM_SP_IMAGE_BASE, |
| .sp_mem_limit = ARM_SP_IMAGE_LIMIT, |
| .sp_image_base = ARM_SP_IMAGE_BASE, |
| .sp_stack_base = PLAT_SP_IMAGE_STACK_BASE, |
| .sp_heap_base = ARM_SP_IMAGE_HEAP_BASE, |
| .sp_ns_comm_buf_base = PLAT_SP_IMAGE_NS_BUF_BASE, |
| .sp_shared_buf_base = PLAT_SPM_BUF_BASE, |
| .sp_image_size = ARM_SP_IMAGE_SIZE, |
| .sp_pcpu_stack_size = PLAT_SP_IMAGE_STACK_PCPU_SIZE, |
| .sp_heap_size = ARM_SP_IMAGE_HEAP_SIZE, |
| .sp_ns_comm_buf_size = PLAT_SP_IMAGE_NS_BUF_SIZE, |
| .sp_shared_buf_size = PLAT_SPM_BUF_SIZE, |
| .num_sp_mem_regions = ARM_SP_IMAGE_NUM_MEM_REGIONS, |
| .num_cpus = PLATFORM_CORE_COUNT, |
| .mp_info = &sp_mp_info[0], |
| }; |
| |
| const struct mmap_region *plat_get_secure_partition_mmap(void *cookie) |
| { |
| return plat_arm_secure_partition_mmap; |
| } |
| |
| const struct spm_mm_boot_info *plat_get_secure_partition_boot_info( |
| void *cookie) |
| { |
| return &plat_arm_secure_partition_boot_info; |
| } |
| #endif |
| |
| /******************************************************************************* |
| * A single boot loader stack is expected to work on both the Foundation FVP |
| * models and the two flavours of the Base FVP models (AEMv8 & Cortex). The |
| * SYS_ID register provides a mechanism for detecting the differences between |
| * these platforms. This information is stored in a per-BL array to allow the |
| * code to take the correct path.Per BL platform configuration. |
| ******************************************************************************/ |
| void __init fvp_config_setup(void) |
| { |
| unsigned int rev, hbi, bld, arch, sys_id; |
| |
| sys_id = mmio_read_32(V2M_SYSREGS_BASE + V2M_SYS_ID); |
| rev = (sys_id >> V2M_SYS_ID_REV_SHIFT) & V2M_SYS_ID_REV_MASK; |
| hbi = (sys_id >> V2M_SYS_ID_HBI_SHIFT) & V2M_SYS_ID_HBI_MASK; |
| bld = (sys_id >> V2M_SYS_ID_BLD_SHIFT) & V2M_SYS_ID_BLD_MASK; |
| arch = (sys_id >> V2M_SYS_ID_ARCH_SHIFT) & V2M_SYS_ID_ARCH_MASK; |
| |
| if (arch != ARCH_MODEL) { |
| ERROR("This firmware is for FVP models\n"); |
| panic(); |
| } |
| |
| /* |
| * The build field in the SYS_ID tells which variant of the GIC |
| * memory is implemented by the model. |
| */ |
| switch (bld) { |
| case BLD_GIC_VE_MMAP: |
| ERROR("Legacy Versatile Express memory map for GIC peripheral" |
| " is not supported\n"); |
| panic(); |
| break; |
| case BLD_GIC_A53A57_MMAP: |
| break; |
| default: |
| ERROR("Unsupported board build %x\n", bld); |
| panic(); |
| } |
| |
| /* |
| * The hbi field in the SYS_ID is 0x020 for the Base FVP & 0x010 |
| * for the Foundation FVP. |
| */ |
| switch (hbi) { |
| case HBI_FOUNDATION_FVP: |
| arm_config.flags = 0; |
| |
| /* |
| * Check for supported revisions of Foundation FVP |
| * Allow future revisions to run but emit warning diagnostic |
| */ |
| switch (rev) { |
| case REV_FOUNDATION_FVP_V2_0: |
| case REV_FOUNDATION_FVP_V2_1: |
| case REV_FOUNDATION_FVP_v9_1: |
| case REV_FOUNDATION_FVP_v9_6: |
| break; |
| default: |
| WARN("Unrecognized Foundation FVP revision %x\n", rev); |
| break; |
| } |
| break; |
| case HBI_BASE_FVP: |
| arm_config.flags |= (ARM_CONFIG_BASE_MMAP | ARM_CONFIG_HAS_TZC); |
| |
| /* |
| * Check for supported revisions |
| * Allow future revisions to run but emit warning diagnostic |
| */ |
| switch (rev) { |
| case REV_BASE_FVP_V0: |
| arm_config.flags |= ARM_CONFIG_FVP_HAS_CCI400; |
| break; |
| case REV_BASE_FVP_REVC: |
| arm_config.flags |= (ARM_CONFIG_FVP_HAS_SMMUV3 | |
| ARM_CONFIG_FVP_HAS_CCI5XX); |
| break; |
| default: |
| WARN("Unrecognized Base FVP revision %x\n", rev); |
| break; |
| } |
| break; |
| default: |
| ERROR("Unsupported board HBI number 0x%x\n", hbi); |
| panic(); |
| } |
| |
| /* |
| * We assume that the presence of MT bit, and therefore shifted |
| * affinities, is uniform across the platform: either all CPUs, or no |
| * CPUs implement it. |
| */ |
| if ((read_mpidr_el1() & MPIDR_MT_MASK) != 0U) |
| arm_config.flags |= ARM_CONFIG_FVP_SHIFTED_AFF; |
| } |
| |
| |
| void __init fvp_interconnect_init(void) |
| { |
| #if FVP_INTERCONNECT_DRIVER == FVP_CCN |
| if (ccn_get_part0_id(PLAT_ARM_CCN_BASE) != CCN_502_PART0_ID) { |
| ERROR("Unrecognized CCN variant detected. Only CCN-502 is supported"); |
| panic(); |
| } |
| |
| plat_arm_interconnect_init(); |
| #else |
| uintptr_t cci_base = 0U; |
| const int *cci_map = NULL; |
| unsigned int map_size = 0U; |
| |
| /* Initialize the right interconnect */ |
| if ((arm_config.flags & ARM_CONFIG_FVP_HAS_CCI5XX) != 0U) { |
| cci_base = PLAT_FVP_CCI5XX_BASE; |
| cci_map = fvp_cci5xx_map; |
| map_size = ARRAY_SIZE(fvp_cci5xx_map); |
| } else if ((arm_config.flags & ARM_CONFIG_FVP_HAS_CCI400) != 0U) { |
| cci_base = PLAT_FVP_CCI400_BASE; |
| cci_map = fvp_cci400_map; |
| map_size = ARRAY_SIZE(fvp_cci400_map); |
| } else { |
| return; |
| } |
| |
| assert(cci_base != 0U); |
| assert(cci_map != NULL); |
| cci_init(cci_base, cci_map, map_size); |
| #endif |
| } |
| |
| void fvp_interconnect_enable(void) |
| { |
| #if FVP_INTERCONNECT_DRIVER == FVP_CCN |
| plat_arm_interconnect_enter_coherency(); |
| #else |
| unsigned int master; |
| |
| if ((arm_config.flags & (ARM_CONFIG_FVP_HAS_CCI400 | |
| ARM_CONFIG_FVP_HAS_CCI5XX)) != 0U) { |
| master = get_interconnect_master(); |
| cci_enable_snoop_dvm_reqs(master); |
| } |
| #endif |
| } |
| |
| void fvp_interconnect_disable(void) |
| { |
| #if FVP_INTERCONNECT_DRIVER == FVP_CCN |
| plat_arm_interconnect_exit_coherency(); |
| #else |
| unsigned int master; |
| |
| if ((arm_config.flags & (ARM_CONFIG_FVP_HAS_CCI400 | |
| ARM_CONFIG_FVP_HAS_CCI5XX)) != 0U) { |
| master = get_interconnect_master(); |
| cci_disable_snoop_dvm_reqs(master); |
| } |
| #endif |
| } |
| |
| #if CRYPTO_SUPPORT |
| int plat_get_mbedtls_heap(void **heap_addr, size_t *heap_size) |
| { |
| assert(heap_addr != NULL); |
| assert(heap_size != NULL); |
| |
| return arm_get_mbedtls_heap(heap_addr, heap_size); |
| } |
| #endif /* CRYPTO_SUPPORT */ |
| |
| void fvp_timer_init(void) |
| { |
| #if USE_SP804_TIMER |
| /* Enable the clock override for SP804 timer 0, which means that no |
| * clock dividers are applied and the raw (35MHz) clock will be used. |
| */ |
| mmio_write_32(V2M_SP810_BASE, FVP_SP810_CTRL_TIM0_OV); |
| |
| /* Initialize delay timer driver using SP804 dual timer 0 */ |
| sp804_timer_init(V2M_SP804_TIMER0_BASE, |
| SP804_TIMER_CLKMULT, SP804_TIMER_CLKDIV); |
| #else |
| generic_delay_timer_init(); |
| |
| /* Enable System level generic timer */ |
| mmio_write_32(ARM_SYS_CNTCTL_BASE + CNTCR_OFF, |
| CNTCR_FCREQ(0U) | CNTCR_EN); |
| #endif /* USE_SP804_TIMER */ |
| } |
| |
| /***************************************************************************** |
| * plat_is_smccc_feature_available() - This function checks whether SMCCC |
| * feature is availabile for platform. |
| * @fid: SMCCC function id |
| * |
| * Return SMC_ARCH_CALL_SUCCESS if SMCCC feature is available and |
| * SMC_ARCH_CALL_NOT_SUPPORTED otherwise. |
| *****************************************************************************/ |
| int32_t plat_is_smccc_feature_available(u_register_t fid) |
| { |
| switch (fid) { |
| case SMCCC_ARCH_SOC_ID: |
| return SMC_ARCH_CALL_SUCCESS; |
| default: |
| return SMC_ARCH_CALL_NOT_SUPPORTED; |
| } |
| } |
| |
| /* Get SOC version */ |
| int32_t plat_get_soc_version(void) |
| { |
| return (int32_t) |
| (SOC_ID_SET_JEP_106(ARM_SOC_CONTINUATION_CODE, |
| ARM_SOC_IDENTIFICATION_CODE) | |
| (FVP_SOC_ID & SOC_ID_IMPL_DEF_MASK)); |
| } |
| |
| /* Get SOC revision */ |
| int32_t plat_get_soc_revision(void) |
| { |
| unsigned int sys_id; |
| |
| sys_id = mmio_read_32(V2M_SYSREGS_BASE + V2M_SYS_ID); |
| return (int32_t)(((sys_id >> V2M_SYS_ID_REV_SHIFT) & |
| V2M_SYS_ID_REV_MASK) & SOC_ID_REV_MASK); |
| } |
| |
| #if ENABLE_RME |
| /* |
| * Get a pointer to the RMM-EL3 Shared buffer and return it |
| * through the pointer passed as parameter. |
| * |
| * This function returns the size of the shared buffer. |
| */ |
| size_t plat_rmmd_get_el3_rmm_shared_mem(uintptr_t *shared) |
| { |
| *shared = (uintptr_t)RMM_SHARED_BASE; |
| |
| return (size_t)RMM_SHARED_SIZE; |
| } |
| |
| int plat_rmmd_load_manifest(struct rmm_manifest *manifest) |
| { |
| uint64_t checksum, num_banks, num_consoles; |
| struct ns_dram_bank *bank_ptr; |
| struct console_info *console_ptr; |
| |
| assert(manifest != NULL); |
| |
| /* Get number of DRAM banks */ |
| num_banks = FCONF_GET_PROPERTY(hw_config, dram_layout, num_banks); |
| assert(num_banks <= ARM_DRAM_NUM_BANKS); |
| |
| /* Set number of consoles */ |
| num_consoles = FVP_RMM_CONSOLE_COUNT; |
| |
| manifest->version = RMMD_MANIFEST_VERSION; |
| manifest->padding = 0U; /* RES0 */ |
| manifest->plat_data = (uintptr_t)NULL; |
| manifest->plat_dram.num_banks = num_banks; |
| manifest->plat_console.num_consoles = num_consoles; |
| |
| /* |
| * Boot Manifest structure illustration, with two dram banks and |
| * a single console. |
| * |
| * +----------------------------------------+ |
| * | offset | field | comment | |
| * +--------+----------------+--------------+ |
| * | 0 | version | 0x00000003 | |
| * +--------+----------------+--------------+ |
| * | 4 | padding | 0x00000000 | |
| * +--------+----------------+--------------+ |
| * | 8 | plat_data | NULL | |
| * +--------+----------------+--------------+ |
| * | 16 | num_banks | | |
| * +--------+----------------+ | |
| * | 24 | banks | plat_dram | |
| * +--------+----------------+ | |
| * | 32 | checksum | | |
| * +--------+----------------+--------------+ |
| * | 40 | num_consoles | | |
| * +--------+----------------+ | |
| * | 48 | consoles | plat_console | |
| * +--------+----------------+ | |
| * | 56 | checksum | | |
| * +--------+----------------+--------------+ |
| * | 64 | base 0 | | |
| * +--------+----------------+ bank[0] | |
| * | 72 | size 0 | | |
| * +--------+----------------+--------------+ |
| * | 80 | base 1 | | |
| * +--------+----------------+ bank[1] | |
| * | 88 | size 1 | | |
| * +--------+----------------+--------------+ |
| * | 96 | base | | |
| * +--------+----------------+ | |
| * | 104 | map_pages | | |
| * +--------+----------------+ | |
| * | 112 | name | | |
| * +--------+----------------+ consoles[0] | |
| * | 120 | clk_in_hz | | |
| * +--------+----------------+ | |
| * | 128 | baud_rate | | |
| * +--------+----------------+ | |
| * | 136 | flags | | |
| * +--------+----------------+--------------+ |
| */ |
| |
| bank_ptr = (struct ns_dram_bank *) |
| (((uintptr_t)manifest) + sizeof(*manifest)); |
| console_ptr = (struct console_info *) |
| ((uintptr_t)bank_ptr + (num_banks * sizeof(*bank_ptr))); |
| |
| manifest->plat_dram.banks = bank_ptr; |
| manifest->plat_console.consoles = console_ptr; |
| |
| /* Ensure the manifest is not larger than the shared buffer */ |
| assert((sizeof(struct rmm_manifest) + |
| (sizeof(struct console_info) * manifest->plat_console.num_consoles) + |
| (sizeof(struct ns_dram_bank) * manifest->plat_dram.num_banks)) <= ARM_EL3_RMM_SHARED_SIZE); |
| |
| /* Calculate checksum of plat_dram structure */ |
| checksum = num_banks + (uint64_t)bank_ptr; |
| |
| /* Store FVP DRAM banks data in Boot Manifest */ |
| for (unsigned long i = 0UL; i < num_banks; i++) { |
| uintptr_t base = FCONF_GET_PROPERTY(hw_config, dram_layout, dram_bank[i].base); |
| uint64_t size = FCONF_GET_PROPERTY(hw_config, dram_layout, dram_bank[i].size); |
| |
| bank_ptr[i].base = base; |
| bank_ptr[i].size = size; |
| |
| /* Update checksum */ |
| checksum += base + size; |
| } |
| |
| /* Checksum must be 0 */ |
| manifest->plat_dram.checksum = ~checksum + 1UL; |
| |
| /* Calculate the checksum of the plat_consoles structure */ |
| checksum = num_consoles + (uint64_t)console_ptr; |
| |
| /* Zero out the console info struct */ |
| memset((void *)console_ptr, '\0', sizeof(struct console_info) * num_consoles); |
| |
| console_ptr[0].map_pages = 1; |
| console_ptr[0].base = FVP_RMM_CONSOLE_BASE; |
| console_ptr[0].clk_in_hz = FVP_RMM_CONSOLE_CLK_IN_HZ; |
| console_ptr[0].baud_rate = FVP_RMM_CONSOLE_BAUD; |
| |
| strlcpy(console_ptr[0].name, FVP_RMM_CONSOLE_NAME, RMM_CONSOLE_MAX_NAME_LEN-1UL); |
| |
| /* Update checksum */ |
| checksum += console_ptr[0].base + console_ptr[0].map_pages + |
| console_ptr[0].clk_in_hz + console_ptr[0].baud_rate; |
| |
| /* Checksum must be 0 */ |
| manifest->plat_console.checksum = ~checksum + 1UL; |
| |
| return 0; |
| } |
| #endif /* ENABLE_RME */ |