| /* |
| * Copyright 2022-2023 NXP |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <assert.h> |
| #include <stdbool.h> |
| |
| #include <arch_helpers.h> |
| #include <common/bl_common.h> |
| #include <common/debug.h> |
| #include <context.h> |
| #include <drivers/console.h> |
| #include <drivers/generic_delay_timer.h> |
| #include <drivers/nxp/trdc/imx_trdc.h> |
| #include <lib/el3_runtime/context_mgmt.h> |
| #include <lib/mmio.h> |
| #include <lib/xlat_tables/xlat_tables_v2.h> |
| #include <plat/common/platform.h> |
| |
| #include <imx8_lpuart.h> |
| #include <plat_imx8.h> |
| #include <platform_def.h> |
| |
| #define MAP_BL31_TOTAL \ |
| MAP_REGION_FLAT(BL31_BASE, BL31_LIMIT - BL31_BASE, MT_MEMORY | MT_RW | MT_SECURE) |
| #define MAP_BL31_RO \ |
| MAP_REGION_FLAT(BL_CODE_BASE, BL_CODE_END - BL_CODE_BASE, MT_MEMORY | MT_RO | MT_SECURE) |
| |
| static const mmap_region_t imx_mmap[] = { |
| AIPS1_MAP, AIPS2_MAP, AIPS4_MAP, GIC_MAP, |
| TRDC_A_MAP, TRDC_W_MAP, TRDC_M_MAP, |
| TRDC_N_MAP, |
| {0}, |
| }; |
| |
| static entry_point_info_t bl32_image_ep_info; |
| static entry_point_info_t bl33_image_ep_info; |
| |
| /* get SPSR for BL33 entry */ |
| static uint32_t get_spsr_for_bl33_entry(void) |
| { |
| unsigned long el_status; |
| unsigned long mode; |
| uint32_t spsr; |
| |
| /* figure out what mode we enter the non-secure world */ |
| el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT; |
| el_status &= ID_AA64PFR0_ELX_MASK; |
| |
| mode = (el_status) ? MODE_EL2 : MODE_EL1; |
| |
| spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS); |
| return spsr; |
| } |
| |
| void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1, |
| u_register_t arg2, u_register_t arg3) |
| { |
| static console_t console; |
| |
| console_lpuart_register(IMX_LPUART_BASE, IMX_BOOT_UART_CLK_IN_HZ, |
| IMX_CONSOLE_BAUDRATE, &console); |
| |
| /* This console is only used for boot stage */ |
| console_set_scope(&console, CONSOLE_FLAG_BOOT); |
| |
| /* |
| * tell BL3-1 where the non-secure software image is located |
| * and the entry state information. |
| */ |
| bl33_image_ep_info.pc = PLAT_NS_IMAGE_OFFSET; |
| bl33_image_ep_info.spsr = get_spsr_for_bl33_entry(); |
| SET_SECURITY_STATE(bl33_image_ep_info.h.attr, NON_SECURE); |
| |
| #if defined(SPD_opteed) |
| /* Populate entry point information for BL32 */ |
| SET_PARAM_HEAD(&bl32_image_ep_info, PARAM_EP, VERSION_1, 0); |
| SET_SECURITY_STATE(bl32_image_ep_info.h.attr, SECURE); |
| bl32_image_ep_info.pc = BL32_BASE; |
| bl32_image_ep_info.spsr = 0; |
| |
| /* Pass TEE base and size to bl33 */ |
| bl33_image_ep_info.args.arg1 = BL32_BASE; |
| bl33_image_ep_info.args.arg2 = BL32_SIZE; |
| |
| /* Make sure memory is clean */ |
| mmio_write_32(BL32_FDT_OVERLAY_ADDR, 0); |
| bl33_image_ep_info.args.arg3 = BL32_FDT_OVERLAY_ADDR; |
| bl32_image_ep_info.args.arg3 = BL32_FDT_OVERLAY_ADDR; |
| #endif |
| } |
| |
| void bl31_plat_arch_setup(void) |
| { |
| /* no coherence memory support on i.MX9 */ |
| const mmap_region_t bl_regions[] = { |
| MAP_BL31_TOTAL, |
| MAP_BL31_RO, |
| }; |
| |
| /* Assign all the GPIO pins to non-secure world by default */ |
| mmio_write_32(GPIO2_BASE + 0x10, 0xffffffff); |
| mmio_write_32(GPIO2_BASE + 0x14, 0x3); |
| mmio_write_32(GPIO2_BASE + 0x18, 0xffffffff); |
| mmio_write_32(GPIO2_BASE + 0x1c, 0x3); |
| |
| mmio_write_32(GPIO3_BASE + 0x10, 0xffffffff); |
| mmio_write_32(GPIO3_BASE + 0x14, 0x3); |
| mmio_write_32(GPIO3_BASE + 0x18, 0xffffffff); |
| mmio_write_32(GPIO3_BASE + 0x1c, 0x3); |
| |
| mmio_write_32(GPIO4_BASE + 0x10, 0xffffffff); |
| mmio_write_32(GPIO4_BASE + 0x14, 0x3); |
| mmio_write_32(GPIO4_BASE + 0x18, 0xffffffff); |
| mmio_write_32(GPIO4_BASE + 0x1c, 0x3); |
| |
| mmio_write_32(GPIO1_BASE + 0x10, 0xffffffff); |
| mmio_write_32(GPIO1_BASE + 0x14, 0x3); |
| mmio_write_32(GPIO1_BASE + 0x18, 0xffffffff); |
| mmio_write_32(GPIO1_BASE + 0x1c, 0x3); |
| |
| setup_page_tables(bl_regions, imx_mmap); |
| enable_mmu_el3(0); |
| |
| /* trdc must be initialized */ |
| trdc_config(); |
| } |
| |
| void bl31_platform_setup(void) |
| { |
| generic_delay_timer_init(); |
| |
| plat_gic_driver_init(); |
| plat_gic_init(); |
| } |
| |
| void bl31_plat_runtime_setup(void) |
| { |
| console_switch_state(CONSOLE_FLAG_RUNTIME); |
| } |
| |
| entry_point_info_t *bl31_plat_get_next_image_ep_info(unsigned int type) |
| { |
| if (type == NON_SECURE) { |
| return &bl33_image_ep_info; |
| } |
| |
| if (type == SECURE) { |
| return &bl32_image_ep_info; |
| } |
| |
| return NULL; |
| } |
| |
| unsigned int plat_get_syscnt_freq2(void) |
| { |
| return COUNTER_FREQUENCY; |
| } |