blob: 36f220e08c965c1e7bce2f32678c4f99ff063581 [file] [log] [blame]
#
# Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
# Report an error if the eval make function is not available.
$(eval eval_available := T)
ifneq (${eval_available},T)
$(error This makefile only works with a Make program that supports $$(eval))
endif
# Some utility macros for manipulating awkward (whitespace) characters.
blank :=
space :=${blank} ${blank}
# A user defined function to recursively search for a filename below a directory
# $1 is the directory root of the recursive search (blank for current directory).
# $2 is the file name to search for.
define rwildcard
$(strip $(foreach d,$(wildcard ${1}*),$(call rwildcard,${d}/,${2}) $(filter $(subst *,%,%${2}),${d})))
endef
# This table is used in converting lower case to upper case.
uppercase_table:=a,A b,B c,C d,D e,E f,F g,G h,H i,I j,J k,K l,L m,M n,N o,O p,P q,Q r,R s,S t,T u,U v,V w,W x,X y,Y z,Z
# Internal macro used for converting lower case to upper case.
# $(1) = upper case table
# $(2) = String to convert
define uppercase_internal
$(if $(1),$$(subst $(firstword $(1)),$(call uppercase_internal,$(wordlist 2,$(words $(1)),$(1)),$(2))),$(2))
endef
# A macro for converting a string to upper case
# $(1) = String to convert
define uppercase
$(eval uppercase_result:=$(call uppercase_internal,$(uppercase_table),$(1)))$(uppercase_result)
endef
# Convenience function for adding build definitions
# $(eval $(call add_define,FOO)) will have:
# -DFOO if $(FOO) is empty; -DFOO=$(FOO) otherwise
define add_define
DEFINES += -D$(1)$(if $(value $(1)),=$(value $(1)),)
endef
# Convenience function for adding build definitions
# $(eval $(call add_define_val,FOO,BAR)) will have:
# -DFOO=BAR
define add_define_val
DEFINES += -D$(1)=$(2)
endef
# Convenience function for verifying option has a boolean value
# $(eval $(call assert_boolean,FOO)) will assert FOO is 0 or 1
define assert_boolean
$(and $(patsubst 0,,$(value $(1))),$(patsubst 1,,$(value $(1))),$(error $(1) must be boolean))
endef
0-9 := 0 1 2 3 4 5 6 7 8 9
# Function to verify that a given option $(1) contains a numeric value
define assert_numeric
$(if $($(1)),,$(error $(1) must not be empty))
$(eval __numeric := $($(1)))
$(foreach d,$(0-9),$(eval __numeric := $(subst $(d),,$(__numeric))))
$(if $(__numeric),$(error $(1) must be numeric))
endef
# IMG_LINKERFILE defines the linker script corresponding to a BL stage
# $(1) = BL stage (2, 30, 31, 32, 33)
define IMG_LINKERFILE
${BUILD_DIR}/bl$(1).ld
endef
# IMG_MAPFILE defines the output file describing the memory map corresponding
# to a BL stage
# $(1) = BL stage (2, 30, 31, 32, 33)
define IMG_MAPFILE
${BUILD_DIR}/bl$(1).map
endef
# IMG_ELF defines the elf file corresponding to a BL stage
# $(1) = BL stage (2, 30, 31, 32, 33)
define IMG_ELF
${BUILD_DIR}/bl$(1).elf
endef
# IMG_DUMP defines the symbols dump file corresponding to a BL stage
# $(1) = BL stage (2, 30, 31, 32, 33)
define IMG_DUMP
${BUILD_DIR}/bl$(1).dump
endef
# IMG_BIN defines the default image file corresponding to a BL stage
# $(1) = BL stage (2, 30, 31, 32, 33)
define IMG_BIN
${BUILD_PLAT}/bl$(1).bin
endef
# FIP_ADD_PAYLOAD appends the command line arguments required by fiptool
# to package a new payload. Optionally, it adds the dependency on this payload
# $(1) = payload filename (i.e. bl31.bin)
# $(2) = command line option for the specified payload (i.e. --bl31)
# $(3) = fip target dependency (optional) (i.e. bl31)
define FIP_ADD_PAYLOAD
$(eval FIP_ARGS += $(2) $(1))
$(eval $(if $(3),FIP_DEPS += $(3)))
endef
# CERT_ADD_CMD_OPT adds a new command line option to the cert_create invocation
# $(1) = parameter filename
# $(2) = cert_create command line option for the specified parameter
# $(3) = input parameter (false if empty)
define CERT_ADD_CMD_OPT
$(eval $(if $(3),CRT_DEPS += $(1)))
$(eval CRT_ARGS += $(2) $(1))
endef
# FIP_ADD_IMG allows the platform to specify an image to be packed in the FIP
# using a build option. It also adds a dependency on the image file, aborting
# the build if the file does not exist.
# $(1) = build option to specify the image filename (SCP_BL2, BL33, etc)
# $(2) = command line option for fiptool (scp_bl2, bl33, etc)
# Example:
# $(eval $(call FIP_ADD_IMG,BL33,--bl33))
define FIP_ADD_IMG
CRT_DEPS += check_$(1)
FIP_DEPS += check_$(1)
$(call FIP_ADD_PAYLOAD,$(value $(1)),$(2))
check_$(1):
$$(if $(value $(1)),,$$(error "Platform '${PLAT}' requires $(1). Please set $(1) to point to the right file"))
endef
# FWU_FIP_ADD_PAYLOAD appends the command line arguments required by fiptool
# to package a new FWU payload. Optionally, it adds the dependency on this payload
# $(1) = payload filename (e.g. ns_bl2u.bin)
# $(2) = command line option for the specified payload (e.g. --fwu)
# $(3) = fip target dependency (optional) (e.g. ns_bl2u)
define FWU_FIP_ADD_PAYLOAD
$(eval $(if $(3),FWU_FIP_DEPS += $(3)))
$(eval FWU_FIP_ARGS += $(2) $(1))
endef
# FWU_CERT_ADD_CMD_OPT adds a new command line option to the cert_create invocation
# $(1) = parameter filename
# $(2) = cert_create command line option for the specified parameter
# $(3) = input parameter (false if empty)
define FWU_CERT_ADD_CMD_OPT
$(eval $(if $(3),FWU_CRT_DEPS += $(1)))
$(eval FWU_CRT_ARGS += $(2) $(1))
endef
# FWU_FIP_ADD_IMG allows the platform to pack a binary image in the FWU FIP
# $(1) build option to specify the image filename (BL2U, NS_BL2U, etc)
# $(2) command line option for fiptool (bl2u, ns_bl2u, etc)
# Example:
# $(eval $(call FWU_FIP_ADD_IMG,BL2U,--bl2u))
define FWU_FIP_ADD_IMG
FWU_CRT_DEPS += check_$(1)
FWU_FIP_DEPS += check_$(1)
$(call FWU_FIP_ADD_PAYLOAD,$(value $(1)),$(2))
check_$(1):
$$(if $(value $(1)),,$$(error "Platform '${PLAT}' requires $(1). Please set $(1) to point to the right file"))
endef
################################################################################
# Auxiliary macros to build TF images from sources
################################################################################
MAKE_DEP = -Wp,-MD,$(DEP) -MT $$@ -MP
# MAKE_C builds a C source file and generates the dependency file
# $(1) = output directory
# $(2) = source file (%.c)
# $(3) = BL stage (2, 2u, 30, 31, 32, 33)
define MAKE_C
$(eval OBJ := $(1)/$(patsubst %.c,%.o,$(notdir $(2))))
$(eval DEP := $(patsubst %.o,%.d,$(OBJ)))
$(eval IMAGE := IMAGE_BL$(call uppercase,$(3)))
$(OBJ): $(2) | bl$(3)_dirs
@echo " CC $$<"
$$(Q)$$(CC) $$(TF_CFLAGS) $$(CFLAGS) -D$(IMAGE) $(MAKE_DEP) -c $$< -o $$@
-include $(DEP)
endef
# MAKE_S builds an assembly source file and generates the dependency file
# $(1) = output directory
# $(2) = assembly file (%.S)
# $(3) = BL stage (2, 2u, 30, 31, 32, 33)
define MAKE_S
$(eval OBJ := $(1)/$(patsubst %.S,%.o,$(notdir $(2))))
$(eval DEP := $(patsubst %.o,%.d,$(OBJ)))
$(eval IMAGE := IMAGE_BL$(call uppercase,$(3)))
$(OBJ): $(2) | bl$(3)_dirs
@echo " AS $$<"
$$(Q)$$(AS) $$(ASFLAGS) -D$(IMAGE) $(MAKE_DEP) -c $$< -o $$@
-include $(DEP)
endef
# MAKE_LD generate the linker script using the C preprocessor
# $(1) = output linker script
# $(2) = input template
# $(3) = BL stage (2, 2u, 30, 31, 32, 33)
define MAKE_LD
$(eval DEP := $(1).d)
$(1): $(2) | bl$(3)_dirs
@echo " PP $$<"
$$(Q)$$(CPP) $$(CPPFLAGS) -P -D__ASSEMBLY__ -D__LINKER__ $(MAKE_DEP) -o $$@ $$<
-include $(DEP)
endef
# MAKE_OBJS builds both C and assembly source files
# $(1) = output directory
# $(2) = list of source files (both C and assembly)
# $(3) = BL stage (2, 30, 31, 32, 33)
define MAKE_OBJS
$(eval C_OBJS := $(filter %.c,$(2)))
$(eval REMAIN := $(filter-out %.c,$(2)))
$(eval $(foreach obj,$(C_OBJS),$(call MAKE_C,$(1),$(obj),$(3))))
$(eval S_OBJS := $(filter %.S,$(REMAIN)))
$(eval REMAIN := $(filter-out %.S,$(REMAIN)))
$(eval $(foreach obj,$(S_OBJS),$(call MAKE_S,$(1),$(obj),$(3))))
$(and $(REMAIN),$(error Unexpected source files present: $(REMAIN)))
endef
# NOTE: The line continuation '\' is required in the next define otherwise we
# end up with a line-feed characer at the end of the last c filename.
# Also bear this issue in mind if extending the list of supported filetypes.
define SOURCES_TO_OBJS
$(notdir $(patsubst %.c,%.o,$(filter %.c,$(1)))) \
$(notdir $(patsubst %.S,%.o,$(filter %.S,$(1))))
endef
# MAKE_TOOL_ARGS macro defines the command line arguments for fiptool for
# each BL image. Arguments:
# $(1) = BL stage (2, 30, 31, 32, 33)
# $(2) = Binary file
# $(3) = FIP command line option (if empty, image will not be included in the FIP)
define MAKE_TOOL_ARGS
$(if $(3),$(eval $(call FIP_ADD_PAYLOAD,$(2),--$(3),bl$(1))))
endef
# Allow overriding the timestamp, for example for reproducible builds, or to
# synchronize timestamps across multiple projects.
# This must be set to a C string (including quotes where applicable).
BUILD_MESSAGE_TIMESTAMP ?= __TIME__", "__DATE__
# MAKE_BL macro defines the targets and options to build each BL image.
# Arguments:
# $(1) = BL stage (2, 2u, 30, 31, 32, 33)
# $(2) = FIP command line option (if empty, image will not be included in the FIP)
define MAKE_BL
$(eval BUILD_DIR := ${BUILD_PLAT}/bl$(1))
$(eval BL_SOURCES := $(BL$(call uppercase,$(1))_SOURCES))
$(eval SOURCES := $(BL_SOURCES) $(BL_COMMON_SOURCES) $(PLAT_BL_COMMON_SOURCES))
$(eval OBJS := $(addprefix $(BUILD_DIR)/,$(call SOURCES_TO_OBJS,$(SOURCES))))
$(eval LINKERFILE := $(call IMG_LINKERFILE,$(1)))
$(eval MAPFILE := $(call IMG_MAPFILE,$(1)))
$(eval ELF := $(call IMG_ELF,$(1)))
$(eval DUMP := $(call IMG_DUMP,$(1)))
$(eval BIN := $(call IMG_BIN,$(1)))
$(eval BL_LINKERFILE := $(BL$(call uppercase,$(1))_LINKERFILE))
# We use sort only to get a list of unique object directory names.
# ordering is not relevant but sort removes duplicates.
$(eval TEMP_OBJ_DIRS := $(sort $(dir ${OBJS} ${LINKERFILE})))
# The $(dir ) function leaves a trailing / on the directory names
# Rip off the / to match directory names with make rule targets.
$(eval OBJ_DIRS := $(patsubst %/,%,$(TEMP_OBJ_DIRS)))
# Create generators for object directory structure
$(eval $(call MAKE_PREREQ_DIR,${BUILD_DIR},))
$(eval $(foreach objd,${OBJ_DIRS},$(call MAKE_PREREQ_DIR,${objd},${BUILD_DIR})))
.PHONY : bl${1}_dirs
# We use order-only prerequisites to ensure that directories are created,
# but do not cause re-builds every time a file is written.
bl${1}_dirs: | ${OBJ_DIRS}
$(eval $(call MAKE_OBJS,$(BUILD_DIR),$(SOURCES),$(1)))
$(eval $(call MAKE_LD,$(LINKERFILE),$(BL_LINKERFILE),$(1)))
$(ELF): $(OBJS) $(LINKERFILE) | bl$(1)_dirs
@echo " LD $$@"
ifdef MAKE_BUILD_STRINGS
$(call MAKE_BUILD_STRINGS, $(BUILD_DIR)/build_message.o)
else
@echo 'const char build_message[] = "Built : "$(BUILD_MESSAGE_TIMESTAMP); \
const char version_string[] = "${VERSION_STRING}";' | \
$$(CC) $$(TF_CFLAGS) $$(CFLAGS) -xc -c - -o $(BUILD_DIR)/build_message.o
endif
$$(Q)$$(LD) -o $$@ $$(LDFLAGS) -Map=$(MAPFILE) --script $(LINKERFILE) \
$(BUILD_DIR)/build_message.o $(OBJS)
$(DUMP): $(ELF)
@echo " OD $$@"
$${Q}$${OD} -dx $$< > $$@
$(BIN): $(ELF)
@echo " BIN $$@"
$$(Q)$$(OC) -O binary $$< $$@
@${ECHO_BLANK_LINE}
@echo "Built $$@ successfully"
@${ECHO_BLANK_LINE}
.PHONY: bl$(1)
bl$(1): $(BIN) $(DUMP)
all: bl$(1)
$(eval $(call MAKE_TOOL_ARGS,$(1),$(BIN),$(2)))
endef